@@ -3147,50 +3147,50 @@ struct wpa_cli_cmd {
static const struct wpa_cli_cmd wpa_cli_commands[] = {
{ "status", wpa_cli_cmd_status, NULL,
cli_cmd_flag_none,
- "[verbose] = get current WPA/EAPOL/EAP status" },
+ "[verbose] = Get current WPA/EAPOL/EAP status" },
{ "ifname", wpa_cli_cmd_ifname, NULL,
cli_cmd_flag_none,
- "= get current interface name" },
+ "= Get current interface name" },
{ "ping", wpa_cli_cmd_ping, NULL,
cli_cmd_flag_none,
- "= pings wpa_supplicant" },
+ "= Ping wpa_supplicant" },
{ "relog", wpa_cli_cmd_relog, NULL,
cli_cmd_flag_none,
- "= re-open log-file (allow rolling logs)" },
+ "= Re-open log-file (allow rolling logs)" },
{ "note", wpa_cli_cmd_note, NULL,
cli_cmd_flag_none,
- "<text> = add a note to wpa_supplicant debug log" },
+ "<text> = Add a note to wpa_supplicant debug log" },
{ "mib", wpa_cli_cmd_mib, NULL,
cli_cmd_flag_none,
- "= get MIB variables (dot1x, dot11)" },
+ "= Get MIB variables (dot1x, dot11)" },
{ "help", wpa_cli_cmd_help, wpa_cli_complete_help,
cli_cmd_flag_none,
- "[command] = show usage help" },
+ "[command] = Show usage help" },
{ "interface", wpa_cli_cmd_interface, NULL,
cli_cmd_flag_none,
- "[ifname] = show interfaces/select interface" },
+ "[ifname] = Show interfaces/select interface" },
{ "level", wpa_cli_cmd_level, NULL,
cli_cmd_flag_none,
- "<debug level> = change debug level" },
+ "<debug level> = Change debug level" },
{ "license", wpa_cli_cmd_license, NULL,
cli_cmd_flag_none,
- "= show full wpa_cli license" },
+ "= Show full wpa_cli license" },
{ "quit", wpa_cli_cmd_quit, NULL,
cli_cmd_flag_none,
- "= exit wpa_cli" },
+ "= Exit wpa_cli" },
{ "set", wpa_cli_cmd_set, wpa_cli_complete_set,
cli_cmd_flag_none,
- "= set variables (shows list of variables when run without "
+ "= Set variables (shows list of variables when run without "
"arguments)" },
{ "dump", wpa_cli_cmd_dump, NULL,
cli_cmd_flag_none,
- "= dump config variables" },
+ "= Dump config variables" },
{ "get", wpa_cli_cmd_get, wpa_cli_complete_get,
cli_cmd_flag_none,
- "<name> = get information" },
+ "<name> = Get information" },
{ "driver_flags", wpa_cli_cmd_driver_flags, NULL,
cli_cmd_flag_none,
- "= list driver flags" },
+ "= List driver flags" },
{ "logon", wpa_cli_cmd_logon, NULL,
cli_cmd_flag_none,
"= IEEE 802.1X EAPOL state machine logon" },
@@ -3199,272 +3199,272 @@ static const struct wpa_cli_cmd wpa_cli_commands[] = {
"= IEEE 802.1X EAPOL state machine logoff" },
{ "pmksa", wpa_cli_cmd_pmksa, NULL,
cli_cmd_flag_none,
- "= show PMKSA cache" },
+ "= Show PMKSA cache" },
{ "pmksa_flush", wpa_cli_cmd_pmksa_flush, NULL,
cli_cmd_flag_none,
- "= flush PMKSA cache entries" },
+ "= Flush PMKSA cache entries" },
#ifdef CONFIG_PMKSA_CACHE_EXTERNAL
{ "pmksa_get", wpa_cli_cmd_pmksa_get, NULL,
cli_cmd_flag_none,
- "<network_id> = fetch all stored PMKSA cache entries" },
+ "<network_id> = Fetch all stored PMKSA cache entries" },
{ "pmksa_add", wpa_cli_cmd_pmksa_add, NULL,
cli_cmd_flag_sensitive,
- "<network_id> <BSSID> <PMKID> <PMK> <reauth_time in seconds> <expiration in seconds> <akmp> <opportunistic> = store PMKSA cache entry from external storage" },
+ "<network_id> <BSSID> <PMKID> <PMK> <reauth_time in seconds> <expiration in seconds> <akmp> <opportunistic> = Store PMKSA cache entry from external storage" },
#ifdef CONFIG_MESH
{ "mesh_pmksa_get", wpa_cli_mesh_cmd_pmksa_get, NULL,
cli_cmd_flag_none,
- "<peer MAC address | any> = fetch all stored mesh PMKSA cache entries" },
+ "<peer MAC address | any> = Fetch all stored mesh PMKSA cache entries" },
{ "mesh_pmksa_add", wpa_cli_mesh_cmd_pmksa_add, NULL,
cli_cmd_flag_sensitive,
- "<BSSID> <PMKID> <PMK> <expiration in seconds> = store mesh PMKSA cache entry from external storage" },
+ "<BSSID> <PMKID> <PMK> <expiration in seconds> = Store mesh PMKSA cache entry from external storage" },
#endif /* CONFIG_MESH */
#endif /* CONFIG_PMKSA_CACHE_EXTERNAL */
{ "reassociate", wpa_cli_cmd_reassociate, NULL,
cli_cmd_flag_none,
- "= force reassociation" },
+ "= Force reassociation" },
{ "reattach", wpa_cli_cmd_reattach, NULL,
cli_cmd_flag_none,
- "= force reassociation back to the same BSS" },
+ "= Force reassociation back to the same BSS" },
{ "preauthenticate", wpa_cli_cmd_preauthenticate, wpa_cli_complete_bss,
cli_cmd_flag_none,
- "<BSSID> = force preauthentication" },
+ "<BSSID> = Force preauthentication" },
{ "identity", wpa_cli_cmd_identity, wpa_cli_complete_network_id,
cli_cmd_flag_none,
- "<network id> <identity> = configure identity for an SSID" },
+ "<network id> <identity> = Configure identity for an SSID" },
{ "password", wpa_cli_cmd_password, wpa_cli_complete_network_id,
cli_cmd_flag_sensitive,
- "<network id> <password> = configure password for an SSID" },
+ "<network id> <password> = Configure password for an SSID" },
{ "new_password", wpa_cli_cmd_new_password,
wpa_cli_complete_network_id, cli_cmd_flag_sensitive,
- "<network id> <password> = change password for an SSID" },
+ "<network id> <password> = Change password for an SSID" },
{ "pin", wpa_cli_cmd_pin, wpa_cli_complete_network_id,
cli_cmd_flag_sensitive,
- "<network id> <pin> = configure pin for an SSID" },
+ "<network id> <pin> = Configure pin for an SSID" },
{ "otp", wpa_cli_cmd_otp, wpa_cli_complete_network_id,
cli_cmd_flag_sensitive,
- "<network id> <password> = configure one-time-password for an SSID"
+ "<network id> <password> = Configure one-time-password for an SSID"
},
{ "psk_passphrase", wpa_cli_cmd_psk_passphrase,
wpa_cli_complete_network_id, cli_cmd_flag_sensitive,
- "<network id> <PSK/passphrase> = configure PSK/passphrase for an SSID" },
+ "<network id> <PSK/passphrase> = Configure PSK/passphrase for an SSID" },
{ "passphrase", wpa_cli_cmd_passphrase, wpa_cli_complete_network_id,
cli_cmd_flag_sensitive,
- "<network id> <passphrase> = configure private key passphrase\n"
+ "<network id> <passphrase> = Configure private key passphrase\n"
" for an SSID" },
{ "sim", wpa_cli_cmd_sim, wpa_cli_complete_network_id,
cli_cmd_flag_sensitive,
- "<network id> <pin> = report SIM operation result" },
+ "<network id> <pin> = Report SIM operation result" },
{ "bssid", wpa_cli_cmd_bssid, wpa_cli_complete_network_id,
cli_cmd_flag_none,
- "<network id> <BSSID> = set preferred BSSID for an SSID" },
+ "<network id> <BSSID> = Set preferred BSSID for an SSID" },
{ "blacklist", wpa_cli_cmd_blacklist, wpa_cli_complete_bss,
cli_cmd_flag_none,
- "<BSSID> = add a BSSID to the blacklist\n"
- "blacklist clear = clear the blacklist\n"
- "blacklist = display the blacklist" },
+ "<BSSID> = Add a BSSID to the blacklist\n"
+ "blacklist clear = Clear the blacklist\n"
+ "blacklist = Display the blacklist" },
{ "log_level", wpa_cli_cmd_log_level, NULL,
cli_cmd_flag_none,
- "<level> [<timestamp>] = update the log level/timestamp\n"
- "log_level = display the current log level and log options" },
+ "<level> [<timestamp>] = Update the log level/timestamp\n"
+ "log_level = Display the current log level and log options" },
{ "list_networks", wpa_cli_cmd_list_networks, NULL,
cli_cmd_flag_none,
- "= list configured networks" },
+ "= List configured networks" },
{ "select_network", wpa_cli_cmd_select_network,
wpa_cli_complete_network_id,
cli_cmd_flag_none,
- "<network id> = select a network (disable others)" },
+ "<network id> = Select a network (disable others)" },
{ "enable_network", wpa_cli_cmd_enable_network,
wpa_cli_complete_network_id,
cli_cmd_flag_none,
- "<network id> = enable a network" },
+ "<network id> = Enable a network" },
{ "disable_network", wpa_cli_cmd_disable_network,
wpa_cli_complete_network_id,
cli_cmd_flag_none,
- "<network id> = disable a network" },
+ "<network id> = Disable a network" },
{ "add_network", wpa_cli_cmd_add_network, NULL,
cli_cmd_flag_none,
- "= add a network" },
+ "= Add a network" },
{ "remove_network", wpa_cli_cmd_remove_network,
wpa_cli_complete_network_id,
cli_cmd_flag_none,
- "<network id> = remove a network" },
+ "<network id> = Remove a network" },
{ "set_network", wpa_cli_cmd_set_network, wpa_cli_complete_network,
cli_cmd_flag_sensitive,
- "<network id> <variable> <value> = set network variables (shows\n"
+ "<network id> <variable> <value> = Set network variables (shows\n"
" list of variables when run without arguments)" },
{ "get_network", wpa_cli_cmd_get_network, wpa_cli_complete_network,
cli_cmd_flag_none,
- "<network id> <variable> = get network variables" },
+ "<network id> <variable> = Get network variables" },
{ "dup_network", wpa_cli_cmd_dup_network, wpa_cli_complete_dup_network,
cli_cmd_flag_none,
- "<src network id> <dst network id> <variable> = duplicate network variables"
+ "<src network id> <dst network id> <variable> = Duplicate network variables"
},
{ "list_creds", wpa_cli_cmd_list_creds, NULL,
cli_cmd_flag_none,
- "= list configured credentials" },
+ "= List configured credentials" },
{ "add_cred", wpa_cli_cmd_add_cred, NULL,
cli_cmd_flag_none,
- "= add a credential" },
+ "= Add a credential" },
{ "remove_cred", wpa_cli_cmd_remove_cred, NULL,
cli_cmd_flag_none,
- "<cred id> = remove a credential" },
+ "<cred id> = Remove a credential" },
{ "set_cred", wpa_cli_cmd_set_cred, wpa_cli_complete_cred,
cli_cmd_flag_sensitive,
- "<cred id> <variable> <value> = set credential variables" },
+ "<cred id> <variable> <value> = Set credential variables" },
{ "get_cred", wpa_cli_cmd_get_cred, wpa_cli_complete_cred,
cli_cmd_flag_none,
- "<cred id> <variable> = get credential variables" },
+ "<cred id> <variable> = Get credential variables" },
{ "save_config", wpa_cli_cmd_save_config, NULL,
cli_cmd_flag_none,
- "= save the current configuration" },
+ "= Save the current configuration" },
{ "disconnect", wpa_cli_cmd_disconnect, NULL,
cli_cmd_flag_none,
- "= disconnect and wait for reassociate/reconnect command before\n"
+ "= Disconnect and wait for reassociate/reconnect command before\n"
" connecting" },
{ "reconnect", wpa_cli_cmd_reconnect, NULL,
cli_cmd_flag_none,
- "= like reassociate, but only takes effect if already disconnected"
+ "= Like reassociate, but only takes effect if already disconnected"
},
{ "scan", wpa_cli_cmd_scan, NULL,
cli_cmd_flag_none,
- "= request new BSS scan" },
+ "= Request new BSS scan" },
{ "scan_results", wpa_cli_cmd_scan_results, NULL,
cli_cmd_flag_none,
- "= get latest scan results" },
+ "= Get latest scan results" },
{ "abort_scan", wpa_cli_cmd_abort_scan, NULL,
cli_cmd_flag_none,
- "= request ongoing scan to be aborted" },
+ "= Request ongoing scan to be aborted" },
{ "bss", wpa_cli_cmd_bss, wpa_cli_complete_bss,
cli_cmd_flag_none,
- "<<idx> | <bssid>> = get detailed scan result info" },
+ "<<idx> | <bssid>> = Get detailed scan result info" },
{ "get_capability", wpa_cli_cmd_get_capability,
wpa_cli_complete_get_capability, cli_cmd_flag_none,
"<eap/pairwise/group/key_mgmt/proto/auth_alg/channels/freq/modes> "
- "= get capabilities" },
+ "= Get capabilities" },
{ "reconfigure", wpa_cli_cmd_reconfigure, NULL,
cli_cmd_flag_none,
- "= force wpa_supplicant to re-read its configuration file" },
+ "= Force wpa_supplicant to re-read its configuration file" },
{ "terminate", wpa_cli_cmd_terminate, NULL,
cli_cmd_flag_none,
- "= terminate wpa_supplicant" },
+ "= Terminate wpa_supplicant" },
{ "interface_add", wpa_cli_cmd_interface_add, NULL,
cli_cmd_flag_none,
"<ifname> <confname> <driver> <ctrl_interface> <driver_param>\n"
- " <bridge_name> <create> <type> = adds new interface, all "
+ " <bridge_name> <create> <type> = Add new interface, all "
"parameters but\n"
" <ifname> are optional. Supported types are station ('sta') and "
"AP ('ap')" },
{ "interface_remove", wpa_cli_cmd_interface_remove, NULL,
cli_cmd_flag_none,
- "<ifname> = removes the interface" },
+ "<ifname> = Remove the interface" },
{ "interface_list", wpa_cli_cmd_interface_list, NULL,
cli_cmd_flag_none,
- "= list available interfaces" },
+ "= List available interfaces" },
{ "ap_scan", wpa_cli_cmd_ap_scan, NULL,
cli_cmd_flag_none,
- "<value> = set ap_scan parameter" },
+ "<value> = Set ap_scan parameter" },
{ "scan_interval", wpa_cli_cmd_scan_interval, NULL,
cli_cmd_flag_none,
- "<value> = set scan_interval parameter (in seconds)" },
+ "<value> = Set scan_interval parameter (in seconds)" },
{ "bss_expire_age", wpa_cli_cmd_bss_expire_age, NULL,
cli_cmd_flag_none,
- "<value> = set BSS expiration age parameter" },
+ "<value> = Set BSS expiration age parameter" },
{ "bss_expire_count", wpa_cli_cmd_bss_expire_count, NULL,
cli_cmd_flag_none,
- "<value> = set BSS expiration scan count parameter" },
+ "<value> = Set BSS expiration scan count parameter" },
{ "bss_flush", wpa_cli_cmd_bss_flush, NULL,
cli_cmd_flag_none,
- "<value> = set BSS flush age (0 by default)" },
+ "<value> = Set BSS flush age (0 by default)" },
{ "ft_ds", wpa_cli_cmd_ft_ds, wpa_cli_complete_bss,
cli_cmd_flag_none,
- "<addr> = request over-the-DS FT with <addr>" },
+ "<addr> = Request over-the-DS FT with <addr>" },
{ "wps_pbc", wpa_cli_cmd_wps_pbc, wpa_cli_complete_bss,
cli_cmd_flag_none,
- "[BSSID] = start Wi-Fi Protected Setup: Push Button Configuration" },
+ "[BSSID] = Start Wi-Fi Protected Setup: Push Button Configuration" },
{ "wps_pin", wpa_cli_cmd_wps_pin, wpa_cli_complete_bss,
cli_cmd_flag_sensitive,
- "<BSSID> [PIN] = start WPS PIN method (returns PIN, if not "
+ "<BSSID> [PIN] = Start WPS PIN method (returns PIN, if not "
"hardcoded)" },
{ "wps_check_pin", wpa_cli_cmd_wps_check_pin, NULL,
cli_cmd_flag_sensitive,
- "<PIN> = verify PIN checksum" },
+ "<PIN> = Verify PIN checksum" },
{ "wps_cancel", wpa_cli_cmd_wps_cancel, NULL, cli_cmd_flag_none,
- "Cancels the pending WPS operation" },
+ "= Cancel the pending WPS operation" },
#ifdef CONFIG_WPS_NFC
{ "wps_nfc", wpa_cli_cmd_wps_nfc, wpa_cli_complete_bss,
cli_cmd_flag_none,
- "[BSSID] = start Wi-Fi Protected Setup: NFC" },
+ "[BSSID] = Start Wi-Fi Protected Setup: NFC" },
{ "wps_nfc_config_token", wpa_cli_cmd_wps_nfc_config_token, NULL,
cli_cmd_flag_none,
- "<WPS|NDEF> = build configuration token" },
+ "<WPS|NDEF> = Build configuration token" },
{ "wps_nfc_token", wpa_cli_cmd_wps_nfc_token, NULL,
cli_cmd_flag_none,
- "<WPS|NDEF> = create password token" },
+ "<WPS|NDEF> = Create password token" },
{ "wps_nfc_tag_read", wpa_cli_cmd_wps_nfc_tag_read, NULL,
cli_cmd_flag_sensitive,
- "<hexdump of payload> = report read NFC tag with WPS data" },
+ "<hexdump of payload> = Report read NFC tag with WPS data" },
{ "nfc_get_handover_req", wpa_cli_cmd_nfc_get_handover_req, NULL,
cli_cmd_flag_none,
- "<NDEF> <WPS> = create NFC handover request" },
+ "<NDEF> <WPS> = Create NFC handover request" },
{ "nfc_get_handover_sel", wpa_cli_cmd_nfc_get_handover_sel, NULL,
cli_cmd_flag_none,
- "<NDEF> <WPS> = create NFC handover select" },
+ "<NDEF> <WPS> = Create NFC handover select" },
{ "nfc_report_handover", wpa_cli_cmd_nfc_report_handover, NULL,
cli_cmd_flag_none,
- "<role> <type> <hexdump of req> <hexdump of sel> = report completed "
+ "<role> <type> <hexdump of req> <hexdump of sel> = Report completed "
"NFC handover" },
#endif /* CONFIG_WPS_NFC */
{ "wps_reg", wpa_cli_cmd_wps_reg, wpa_cli_complete_bss,
cli_cmd_flag_sensitive,
- "<BSSID> <AP PIN> = start WPS Registrar to configure an AP" },
+ "<BSSID> <AP PIN> = Start WPS Registrar to configure an AP" },
{ "wps_ap_pin", wpa_cli_cmd_wps_ap_pin, NULL,
cli_cmd_flag_sensitive,
- "[params..] = enable/disable AP PIN" },
+ "[params..] = Enable/disable AP PIN" },
{ "wps_er_start", wpa_cli_cmd_wps_er_start, NULL,
cli_cmd_flag_none,
- "[IP address] = start Wi-Fi Protected Setup External Registrar" },
+ "[IP address] = Start Wi-Fi Protected Setup External Registrar" },
{ "wps_er_stop", wpa_cli_cmd_wps_er_stop, NULL,
cli_cmd_flag_none,
- "= stop Wi-Fi Protected Setup External Registrar" },
+ "= Stop Wi-Fi Protected Setup External Registrar" },
{ "wps_er_pin", wpa_cli_cmd_wps_er_pin, NULL,
cli_cmd_flag_sensitive,
- "<UUID> <PIN> = add an Enrollee PIN to External Registrar" },
+ "<UUID> <PIN> = Add an Enrollee PIN to External Registrar" },
{ "wps_er_pbc", wpa_cli_cmd_wps_er_pbc, NULL,
cli_cmd_flag_none,
- "<UUID> = accept an Enrollee PBC using External Registrar" },
+ "<UUID> = Accept an Enrollee PBC using External Registrar" },
{ "wps_er_learn", wpa_cli_cmd_wps_er_learn, NULL,
cli_cmd_flag_sensitive,
- "<UUID> <PIN> = learn AP configuration" },
+ "<UUID> <PIN> = Learn AP configuration" },
{ "wps_er_set_config", wpa_cli_cmd_wps_er_set_config, NULL,
cli_cmd_flag_none,
- "<UUID> <network id> = set AP configuration for enrolling" },
+ "<UUID> <network id> = Set AP configuration for enrolling" },
{ "wps_er_config", wpa_cli_cmd_wps_er_config, NULL,
cli_cmd_flag_sensitive,
- "<UUID> <PIN> <SSID> <auth> <encr> <key> = configure AP" },
+ "<UUID> <PIN> <SSID> <auth> <encr> <key> = Configure AP" },
#ifdef CONFIG_WPS_NFC
{ "wps_er_nfc_config_token", wpa_cli_cmd_wps_er_nfc_config_token, NULL,
cli_cmd_flag_none,
- "<WPS/NDEF> <UUID> = build NFC configuration token" },
+ "<WPS/NDEF> <UUID> = Build NFC configuration token" },
#endif /* CONFIG_WPS_NFC */
{ "ibss_rsn", wpa_cli_cmd_ibss_rsn, NULL,
cli_cmd_flag_none,
- "<addr> = request RSN authentication with <addr> in IBSS" },
+ "<addr> = Request RSN authentication with <addr> in IBSS" },
#ifdef CONFIG_AP
{ "sta", wpa_cli_cmd_sta, wpa_cli_complete_sta,
cli_cmd_flag_none,
- "<addr> = get information about an associated station (AP)" },
+ "<addr> = Get information about an associated station (AP)" },
{ "all_sta", wpa_cli_cmd_all_sta, NULL,
cli_cmd_flag_none,
- "= get information about all associated stations (AP)" },
+ "= Get information about all associated stations (AP)" },
{ "list_sta", wpa_cli_cmd_list_sta, NULL,
cli_cmd_flag_none,
- "= list all stations (AP)" },
+ "= List all stations (AP)" },
{ "deauthenticate", wpa_cli_cmd_deauthenticate,
wpa_cli_complete_deauthenticate, cli_cmd_flag_none,
- "<addr> = deauthenticate a station" },
+ "<addr> = Deauthenticate a station" },
{ "disassociate", wpa_cli_cmd_disassociate,
wpa_cli_complete_disassociate, cli_cmd_flag_none,
- "<addr> = disassociate a station" },
+ "<addr> = Disassociate a station" },
{ "chan_switch", wpa_cli_cmd_chanswitch, NULL,
cli_cmd_flag_none,
"<cs_count> <freq> [sec_channel_offset=] [center_freq1=]"
@@ -3472,23 +3472,23 @@ static const struct wpa_cli_cmd wpa_cli_commands[] = {
" = CSA parameters" },
#endif /* CONFIG_AP */
{ "suspend", wpa_cli_cmd_suspend, NULL, cli_cmd_flag_none,
- "= notification of suspend/hibernate" },
+ "= Notification of suspend/hibernate" },
{ "resume", wpa_cli_cmd_resume, NULL, cli_cmd_flag_none,
- "= notification of resume/thaw" },
+ "= Notification of resume/thaw" },
#ifdef CONFIG_TESTING_OPTIONS
{ "drop_sa", wpa_cli_cmd_drop_sa, NULL, cli_cmd_flag_none,
- "= drop SA without deauth/disassoc (test command)" },
+ "= Drop SA without deauth/disassoc (test command)" },
#endif /* CONFIG_TESTING_OPTIONS */
{ "roam", wpa_cli_cmd_roam, wpa_cli_complete_bss,
cli_cmd_flag_none,
- "<addr> = roam to the specified BSS" },
+ "<addr> = Roam to the specified BSS" },
#ifdef CONFIG_MESH
{ "mesh_interface_add", wpa_cli_cmd_mesh_interface_add, NULL,
cli_cmd_flag_none,
"[ifname] = Create a new mesh interface" },
{ "mesh_group_add", wpa_cli_cmd_mesh_group_add, NULL,
cli_cmd_flag_none,
- "<network id> = join a mesh network (disable others)" },
+ "<network id> = Join a mesh network (disable others)" },
{ "mesh_group_remove", wpa_cli_cmd_mesh_group_remove, NULL,
cli_cmd_flag_none,
"<ifname> = Remove mesh group interface" },
@@ -3505,135 +3505,135 @@ static const struct wpa_cli_cmd wpa_cli_commands[] = {
#ifdef CONFIG_P2P
{ "p2p_find", wpa_cli_cmd_p2p_find, wpa_cli_complete_p2p_find,
cli_cmd_flag_none,
- "[timeout] [type=*] = find P2P Devices for up-to timeout seconds" },
+ "[timeout] [type=*] = Find P2P Devices for up-to timeout seconds" },
{ "p2p_stop_find", wpa_cli_cmd_p2p_stop_find, NULL, cli_cmd_flag_none,
- "= stop P2P Devices search" },
+ "= Stop P2P Devices search" },
{ "p2p_asp_provision", wpa_cli_cmd_p2p_asp_provision, NULL,
cli_cmd_flag_none,
- "<addr> adv_id=<adv_id> conncap=<conncap> [info=<infodata>] = provision with a P2P ASP Device" },
+ "<addr> adv_id=<adv_id> conncap=<conncap> [info=<infodata>] = Provision with a P2P ASP Device" },
{ "p2p_asp_provision_resp", wpa_cli_cmd_p2p_asp_provision_resp, NULL,
cli_cmd_flag_none,
- "<addr> adv_id=<adv_id> [role<conncap>] [info=<infodata>] = provision with a P2P ASP Device" },
+ "<addr> adv_id=<adv_id> [role<conncap>] [info=<infodata>] = Provision with a P2P ASP Device" },
{ "p2p_connect", wpa_cli_cmd_p2p_connect, wpa_cli_complete_p2p_connect,
cli_cmd_flag_none,
- "<addr> <\"pbc\"|PIN> [ht40] = connect to a P2P Device" },
+ "<addr> <\"pbc\"|PIN> [ht40] = Connect to a P2P Device" },
{ "p2p_listen", wpa_cli_cmd_p2p_listen, NULL, cli_cmd_flag_none,
- "[timeout] = listen for P2P Devices for up-to timeout seconds" },
+ "[timeout] = Listen for P2P Devices for up-to timeout seconds" },
{ "p2p_group_remove", wpa_cli_cmd_p2p_group_remove,
wpa_cli_complete_p2p_group_remove, cli_cmd_flag_none,
- "<ifname> = remove P2P group interface (terminate group if GO)" },
+ "<ifname> = Remove P2P group interface (terminate group if GO)" },
{ "p2p_group_add", wpa_cli_cmd_p2p_group_add, NULL, cli_cmd_flag_none,
- "[ht40] = add a new P2P group (local end as GO)" },
+ "[ht40] = Add a new P2P group (local end as GO)" },
{ "p2p_group_member", wpa_cli_cmd_p2p_group_member, NULL,
cli_cmd_flag_none,
"<dev_addr> = Get peer interface address on local GO using peer Device Address" },
{ "p2p_prov_disc", wpa_cli_cmd_p2p_prov_disc,
wpa_cli_complete_p2p_peer, cli_cmd_flag_none,
- "<addr> <method> = request provisioning discovery" },
+ "<addr> <method> = Request provisioning discovery" },
{ "p2p_get_passphrase", wpa_cli_cmd_p2p_get_passphrase, NULL,
cli_cmd_flag_none,
- "= get the passphrase for a group (GO only)" },
+ "= Get the passphrase for a group (GO only)" },
{ "p2p_serv_disc_req", wpa_cli_cmd_p2p_serv_disc_req,
wpa_cli_complete_p2p_peer, cli_cmd_flag_none,
- "<addr> <TLVs> = schedule service discovery request" },
+ "<addr> <TLVs> = Schedule service discovery request" },
{ "p2p_serv_disc_cancel_req", wpa_cli_cmd_p2p_serv_disc_cancel_req,
NULL, cli_cmd_flag_none,
- "<id> = cancel pending service discovery request" },
+ "<id> = Cancel pending service discovery request" },
{ "p2p_serv_disc_resp", wpa_cli_cmd_p2p_serv_disc_resp, NULL,
cli_cmd_flag_none,
- "<freq> <addr> <dialog token> <TLVs> = service discovery response" },
+ "<freq> <addr> <dialog token> <TLVs> = Service discovery response" },
{ "p2p_service_update", wpa_cli_cmd_p2p_service_update, NULL,
cli_cmd_flag_none,
- "= indicate change in local services" },
+ "= Indicate change in local services" },
{ "p2p_serv_disc_external", wpa_cli_cmd_p2p_serv_disc_external, NULL,
cli_cmd_flag_none,
- "<external> = set external processing of service discovery" },
+ "<external> = Set external processing of service discovery" },
{ "p2p_service_flush", wpa_cli_cmd_p2p_service_flush, NULL,
cli_cmd_flag_none,
- "= remove all stored service entries" },
+ "= Remove all stored service entries" },
{ "p2p_service_add", wpa_cli_cmd_p2p_service_add, NULL,
cli_cmd_flag_none,
- "<bonjour|upnp|asp> <query|version> <response|service> = add a local "
+ "<bonjour|upnp|asp> <query|version> <response|service> = Add a local "
"service" },
{ "p2p_service_rep", wpa_cli_cmd_p2p_service_rep, NULL,
cli_cmd_flag_none,
- "asp <auto> <adv_id> <svc_state> <svc_string> [<svc_info>] = replace "
+ "asp <auto> <adv_id> <svc_state> <svc_string> [<svc_info>] = Replace "
"local ASP service" },
{ "p2p_service_del", wpa_cli_cmd_p2p_service_del, NULL,
cli_cmd_flag_none,
- "<bonjour|upnp> <query|version> [|service] = remove a local "
+ "<bonjour|upnp> <query|version> [|service] = Remove a local "
"service" },
{ "p2p_reject", wpa_cli_cmd_p2p_reject, wpa_cli_complete_p2p_peer,
cli_cmd_flag_none,
- "<addr> = reject connection attempts from a specific peer" },
+ "<addr> = Reject connection attempts from a specific peer" },
{ "p2p_invite", wpa_cli_cmd_p2p_invite, NULL,
cli_cmd_flag_none,
- "<cmd> [peer=addr] = invite peer" },
+ "<cmd> [peer=addr] = Invite peer" },
{ "p2p_peers", wpa_cli_cmd_p2p_peers, NULL, cli_cmd_flag_none,
- "[discovered] = list known (optionally, only fully discovered) P2P "
+ "[discovered] = List known (optionally, only fully discovered) P2P "
"peers" },
{ "p2p_peer", wpa_cli_cmd_p2p_peer, wpa_cli_complete_p2p_peer,
cli_cmd_flag_none,
- "<address> = show information about known P2P peer" },
+ "<address> = Show information about known P2P peer" },
{ "p2p_set", wpa_cli_cmd_p2p_set, wpa_cli_complete_p2p_set,
cli_cmd_flag_none,
- "<field> <value> = set a P2P parameter" },
+ "<field> <value> = Set a P2P parameter" },
{ "p2p_flush", wpa_cli_cmd_p2p_flush, NULL, cli_cmd_flag_none,
- "= flush P2P state" },
+ "= Flush P2P state" },
{ "p2p_cancel", wpa_cli_cmd_p2p_cancel, NULL, cli_cmd_flag_none,
- "= cancel P2P group formation" },
+ "= Cancel P2P group formation" },
{ "p2p_unauthorize", wpa_cli_cmd_p2p_unauthorize,
wpa_cli_complete_p2p_peer, cli_cmd_flag_none,
- "<address> = unauthorize a peer" },
+ "<address> = Unauthorize a peer" },
{ "p2p_presence_req", wpa_cli_cmd_p2p_presence_req, NULL,
cli_cmd_flag_none,
- "[<duration> <interval>] [<duration> <interval>] = request GO "
+ "[<duration> <interval>] [<duration> <interval>] = Request GO "
"presence" },
{ "p2p_ext_listen", wpa_cli_cmd_p2p_ext_listen, NULL,
cli_cmd_flag_none,
- "[<period> <interval>] = set extended listen timing" },
+ "[<period> <interval>] = Set extended listen timing" },
{ "p2p_remove_client", wpa_cli_cmd_p2p_remove_client,
wpa_cli_complete_p2p_peer, cli_cmd_flag_none,
- "<address|iface=address> = remove a peer from all groups" },
+ "<address|iface=address> = Remove a peer from all groups" },
#endif /* CONFIG_P2P */
{ "vendor_elem_add", wpa_cli_cmd_vendor_elem_add, NULL,
cli_cmd_flag_none,
- "<frame id> <hexdump of elem(s)> = add vendor specific IEs to frame(s)\n"
+ "<frame id> <hexdump of elem(s)> = Add vendor specific IEs to frame(s)\n"
VENDOR_ELEM_FRAME_ID },
{ "vendor_elem_get", wpa_cli_cmd_vendor_elem_get, NULL,
cli_cmd_flag_none,
- "<frame id> = get vendor specific IE(s) to frame(s)\n"
+ "<frame id> = Get vendor specific IE(s) to frame(s)\n"
VENDOR_ELEM_FRAME_ID },
{ "vendor_elem_remove", wpa_cli_cmd_vendor_elem_remove, NULL,
cli_cmd_flag_none,
- "<frame id> <hexdump of elem(s)> = remove vendor specific IE(s) in frame(s)\n"
+ "<frame id> <hexdump of elem(s)> = Remove vendor specific IE(s) in frame(s)\n"
VENDOR_ELEM_FRAME_ID },
#ifdef CONFIG_WIFI_DISPLAY
{ "wfd_subelem_set", wpa_cli_cmd_wfd_subelem_set, NULL,
cli_cmd_flag_none,
- "<subelem> [contents] = set Wi-Fi Display subelement" },
+ "<subelem> [contents] = Set Wi-Fi Display subelement" },
{ "wfd_subelem_get", wpa_cli_cmd_wfd_subelem_get, NULL,
cli_cmd_flag_none,
- "<subelem> = get Wi-Fi Display subelement" },
+ "<subelem> = Get Wi-Fi Display subelement" },
#endif /* CONFIG_WIFI_DISPLAY */
#ifdef CONFIG_INTERWORKING
{ "fetch_anqp", wpa_cli_cmd_fetch_anqp, NULL, cli_cmd_flag_none,
- "= fetch ANQP information for all APs" },
+ "= Fetch ANQP information for all APs" },
{ "stop_fetch_anqp", wpa_cli_cmd_stop_fetch_anqp, NULL,
cli_cmd_flag_none,
- "= stop fetch_anqp operation" },
+ "= Stop fetch_anqp operation" },
{ "interworking_select", wpa_cli_cmd_interworking_select, NULL,
cli_cmd_flag_none,
- "[auto] = perform Interworking network selection" },
+ "[auto] = Perform Interworking network selection" },
{ "interworking_connect", wpa_cli_cmd_interworking_connect,
wpa_cli_complete_bss, cli_cmd_flag_none,
- "<BSSID> = connect using Interworking credentials" },
+ "<BSSID> = Connect using Interworking credentials" },
{ "interworking_add_network", wpa_cli_cmd_interworking_add_network,
wpa_cli_complete_bss, cli_cmd_flag_none,
- "<BSSID> = connect using Interworking credentials" },
+ "<BSSID> = Connect using Interworking credentials" },
{ "anqp_get", wpa_cli_cmd_anqp_get, wpa_cli_complete_bss,
cli_cmd_flag_none,
- "<addr> <info id>[,<info id>]... = request ANQP information" },
+ "<addr> <info id>[,<info id>]... = Request ANQP information" },
{ "gas_request", wpa_cli_cmd_gas_request, wpa_cli_complete_bss,
cli_cmd_flag_none,
"<addr> <AdvProtoID> [QueryReq] = GAS request" },
@@ -3644,32 +3644,32 @@ static const struct wpa_cli_cmd wpa_cli_commands[] = {
#ifdef CONFIG_HS20
{ "hs20_anqp_get", wpa_cli_cmd_hs20_anqp_get, wpa_cli_complete_bss,
cli_cmd_flag_none,
- "<addr> <subtype>[,<subtype>]... = request HS 2.0 ANQP information"
+ "<addr> <subtype>[,<subtype>]... = Request HS 2.0 ANQP information"
},
{ "nai_home_realm_list", wpa_cli_cmd_get_nai_home_realm_list,
wpa_cli_complete_bss, cli_cmd_flag_none,
- "<addr> <home realm> = get HS20 nai home realm list" },
+ "<addr> <home realm> = Get HS20 nai home realm list" },
{ "hs20_icon_request", wpa_cli_cmd_hs20_icon_request,
wpa_cli_complete_bss, cli_cmd_flag_none,
- "<addr> <icon name> = get Hotspot 2.0 OSU icon" },
+ "<addr> <icon name> = Get Hotspot 2.0 OSU icon" },
{ "fetch_osu", wpa_cli_cmd_fetch_osu, NULL, cli_cmd_flag_none,
- "= fetch OSU provider information from all APs" },
+ "= Fetch OSU provider information from all APs" },
{ "cancel_fetch_osu", wpa_cli_cmd_cancel_fetch_osu, NULL,
cli_cmd_flag_none,
- "= cancel fetch_osu command" },
+ "= Cancel fetch_osu command" },
#endif /* CONFIG_HS20 */
{ "sta_autoconnect", wpa_cli_cmd_sta_autoconnect, NULL,
cli_cmd_flag_none,
- "<0/1> = disable/enable automatic reconnection" },
+ "<0/1> = Disable/enable automatic reconnection" },
{ "tdls_discover", wpa_cli_cmd_tdls_discover, NULL,
cli_cmd_flag_none,
- "<addr> = request TDLS discovery with <addr>" },
+ "<addr> = Request TDLS discovery with <addr>" },
{ "tdls_setup", wpa_cli_cmd_tdls_setup, NULL,
cli_cmd_flag_none,
- "<addr> = request TDLS setup with <addr>" },
+ "<addr> = Request TDLS setup with <addr>" },
{ "tdls_teardown", wpa_cli_cmd_tdls_teardown, NULL,
cli_cmd_flag_none,
- "<addr> = tear down TDLS with <addr>" },
+ "<addr> = Tear down TDLS with <addr>" },
{ "tdls_link_status", wpa_cli_cmd_tdls_link_status, NULL,
cli_cmd_flag_none,
"<addr> = TDLS link status with <addr>" },
@@ -3677,40 +3677,40 @@ static const struct wpa_cli_cmd wpa_cli_commands[] = {
cli_cmd_flag_none,
"<uplink/downlink/bidi> <tsid=0..7> <up=0..7> [nominal_msdu_size=#] "
"[mean_data_rate=#] [min_phy_rate=#] [sba=#] [fixed_nominal_msdu] "
- "= add WMM-AC traffic stream" },
+ "= Add WMM-AC traffic stream" },
{ "wmm_ac_delts", wpa_cli_cmd_wmm_ac_delts, NULL,
cli_cmd_flag_none,
- "<tsid> = delete WMM-AC traffic stream" },
+ "<tsid> = Delete WMM-AC traffic stream" },
{ "wmm_ac_status", wpa_cli_cmd_wmm_ac_status, NULL,
cli_cmd_flag_none,
- "= show status for Wireless Multi-Media Admission-Control" },
+ "= Show status for Wireless Multi-Media Admission-Control" },
{ "tdls_chan_switch", wpa_cli_cmd_tdls_chan_switch, NULL,
cli_cmd_flag_none,
"<addr> <oper class> <freq> [sec_channel_offset=] [center_freq1=] "
- "[center_freq2=] [bandwidth=] [ht|vht] = enable channel switching "
+ "[center_freq2=] [bandwidth=] [ht|vht] = Enable channel switching "
"with TDLS peer" },
{ "tdls_cancel_chan_switch", wpa_cli_cmd_tdls_cancel_chan_switch, NULL,
cli_cmd_flag_none,
- "<addr> = disable channel switching with TDLS peer <addr>" },
+ "<addr> = Disable channel switching with TDLS peer <addr>" },
{ "signal_poll", wpa_cli_cmd_signal_poll, NULL,
cli_cmd_flag_none,
- "= get signal parameters" },
+ "= Get signal parameters" },
{ "signal_monitor", wpa_cli_cmd_signal_monitor, NULL,
cli_cmd_flag_none,
- "= set signal monitor parameters" },
+ "= Set signal monitor parameters" },
{ "pktcnt_poll", wpa_cli_cmd_pktcnt_poll, NULL,
cli_cmd_flag_none,
- "= get TX/RX packet counters" },
+ "= Get TX/RX packet counters" },
{ "reauthenticate", wpa_cli_cmd_reauthenticate, NULL,
cli_cmd_flag_none,
- "= trigger IEEE 802.1X/EAPOL reauthentication" },
+ "= Trigger IEEE 802.1X/EAPOL reauthentication" },
#ifdef CONFIG_AUTOSCAN
{ "autoscan", wpa_cli_cmd_autoscan, NULL, cli_cmd_flag_none,
"[params] = Set or unset (if none) autoscan parameters" },
#endif /* CONFIG_AUTOSCAN */
#ifdef CONFIG_WNM
{ "wnm_sleep", wpa_cli_cmd_wnm_sleep, NULL, cli_cmd_flag_none,
- "<enter/exit> [interval=#] = enter/exit WNM-Sleep mode" },
+ "<enter/exit> [interval=#] = Enter/exit WNM-Sleep mode" },
{ "wnm_bss_query", wpa_cli_cmd_wnm_bss_query, NULL, cli_cmd_flag_none,
"<query reason> [list]"
" [neighbor=<BSSID>,<BSSID information>,<operating class>,<channel number>,<PHY type>[,<hexdump of optional subelements>]"
@@ -3719,13 +3719,13 @@ static const struct wpa_cli_cmd wpa_cli_commands[] = {
{ "raw", wpa_cli_cmd_raw, NULL, cli_cmd_flag_sensitive,
"<params..> = Sent unprocessed command" },
{ "flush", wpa_cli_cmd_flush, NULL, cli_cmd_flag_none,
- "= flush wpa_supplicant state" },
+ "= Flush wpa_supplicant state" },
#ifdef ANDROID
{ "driver", wpa_cli_cmd_driver, NULL, cli_cmd_flag_none,
- "<command> = driver private commands" },
+ "<command> = Driver private commands" },
#endif /* ANDROID */
{ "radio_work", wpa_cli_cmd_radio_work, NULL, cli_cmd_flag_none,
- "= radio_work <show/add/done>" },
+ "= Radio_work <show/add/done>" },
{ "vendor", wpa_cli_cmd_vendor, NULL, cli_cmd_flag_none,
"<vendor id> <command id> [<hex formatted command argument>] = Send vendor command"
},
@@ -3734,64 +3734,64 @@ static const struct wpa_cli_cmd wpa_cli_commands[] = {
"[ssid=<SSID>] [lci] [civic] = Trigger request to AP for neighboring AP report (with optional given SSID in hex or enclosed in double quotes, default: current SSID; with optional LCI and location civic request)"
},
{ "erp_flush", wpa_cli_cmd_erp_flush, NULL, cli_cmd_flag_none,
- "= flush ERP keys" },
+ "= Flush ERP keys" },
{ "mac_rand_scan",
wpa_cli_cmd_mac_rand_scan, NULL, cli_cmd_flag_none,
"<scan|sched|pno|all> enable=<0/1> [addr=mac-address "
- "mask=mac-address-mask] = scan MAC randomization"
+ "mask=mac-address-mask] = Scan MAC randomization"
},
{ "get_pref_freq_list", wpa_cli_cmd_get_pref_freq_list, NULL,
cli_cmd_flag_none,
- "<interface type> = retrieve preferred freq list for the specified interface type" },
+ "<interface type> = Retrieve preferred freq list for the specified interface type" },
{ "p2p_lo_start", wpa_cli_cmd_p2p_lo_start, NULL,
cli_cmd_flag_none,
- "<freq> <period> <interval> <count> = start P2P listen offload" },
+ "<freq> <period> <interval> <count> = Start P2P listen offload" },
{ "p2p_lo_stop", wpa_cli_cmd_p2p_lo_stop, NULL,
cli_cmd_flag_none,
- "= stop P2P listen offload" },
+ "= Stop P2P listen offload" },
#ifdef CONFIG_DPP
{ "dpp_qr_code", wpa_cli_cmd_dpp_qr_code, NULL, cli_cmd_flag_none,
- "report a scanned DPP URI from a QR Code" },
+ "= Report a scanned DPP URI from a QR Code" },
{ "dpp_bootstrap_gen", wpa_cli_cmd_dpp_bootstrap_gen, NULL,
cli_cmd_flag_sensitive,
- "type=<qrcode> [chan=..] [mac=..] [info=..] [curve=..] [key=..] = generate DPP bootstrap information" },
+ "type=<qrcode> [chan=..] [mac=..] [info=..] [curve=..] [key=..] = Generate DPP bootstrap information" },
{ "dpp_bootstrap_remove", wpa_cli_cmd_dpp_bootstrap_remove, NULL,
cli_cmd_flag_none,
- "*|<id> = remove DPP bootstrap information" },
+ "*|<id> = Remove DPP bootstrap information" },
{ "dpp_bootstrap_get_uri", wpa_cli_cmd_dpp_bootstrap_get_uri, NULL,
cli_cmd_flag_none,
- "<id> = get DPP bootstrap URI" },
+ "<id> = Get DPP bootstrap URI" },
{ "dpp_bootstrap_info", wpa_cli_cmd_dpp_bootstrap_info, NULL,
cli_cmd_flag_none,
- "<id> = show DPP bootstrap information" },
+ "<id> = Show DPP bootstrap information" },
{ "dpp_auth_init", wpa_cli_cmd_dpp_auth_init, NULL, cli_cmd_flag_none,
- "peer=<id> [own=<id>] = initiate DPP bootstrapping" },
+ "peer=<id> [own=<id>] = Initiate DPP bootstrapping" },
{ "dpp_listen", wpa_cli_cmd_dpp_listen, NULL, cli_cmd_flag_none,
- "<freq in MHz> = start DPP listen" },
+ "<freq in MHz> = Start DPP listen" },
{ "dpp_stop_listen", wpa_cli_cmd_dpp_stop_listen, NULL,
cli_cmd_flag_none,
- "= stop DPP listen" },
+ "= Stop DPP listen" },
{ "dpp_configurator_add", wpa_cli_cmd_dpp_configurator_add, NULL,
cli_cmd_flag_sensitive,
- "[curve=..] [key=..] = add DPP configurator" },
+ "[curve=..] [key=..] = Add DPP configurator" },
{ "dpp_configurator_remove", wpa_cli_cmd_dpp_configurator_remove, NULL,
cli_cmd_flag_none,
- "*|<id> = remove DPP configurator" },
+ "*|<id> = Remove DPP configurator" },
{ "dpp_configurator_get_key", wpa_cli_cmd_dpp_configurator_get_key,
NULL, cli_cmd_flag_none,
"<id> = Get DPP configurator's private key" },
{ "dpp_configurator_sign", wpa_cli_cmd_dpp_configurator_sign, NULL,
cli_cmd_flag_none,
- "conf=<role> configurator=<id> = generate self DPP configuration" },
+ "conf=<role> configurator=<id> = Generate self DPP configuration" },
{ "dpp_pkex_add", wpa_cli_cmd_dpp_pkex_add, NULL,
cli_cmd_flag_sensitive,
- "add PKEX code" },
+ "= Add PKEX code" },
{ "dpp_pkex_remove", wpa_cli_cmd_dpp_pkex_remove, NULL,
cli_cmd_flag_none,
- "*|<id> = remove DPP pkex information" },
+ "*|<id> = Remove DPP pkex information" },
#endif /* CONFIG_DPP */
{ "all_bss", wpa_cli_cmd_all_bss, NULL, cli_cmd_flag_none,
- "= list all BSS entries (scan results)" },
+ "= List all BSS entries (scan results)" },
{ NULL, NULL, NULL, cli_cmd_flag_none, NULL }
};