Show patches with: Archived = No       |   7249 patches
« 1 2 ... 27 28 29 … 72 73 »
Patch Series A/F/R/T S/W/F Date Submitter Delegate State
wpa_supplicant: fix interface-add wpa-cli command. - - - - --- 2015-04-03 Ben Greear Accepted
wpa_supplicant: clear blacklist on connect - - - - --- 2015-04-03 Jason Abele Accepted
wpa_ctrl missing include for sys/stat.h - - - - --- 2015-04-02 Dmitry Shmidt Accepted
P2P : Add Operating class 125 for P2P supported channels - - - - --- 2015-04-02 Ben Abdessalem, AmrX Accepted
[PATCH-v2,4/4] hs20-client: allow user to specify spp.xsd file. - - - - --- 2015-04-01 Ben Greear Accepted
[PATCH-v2,3/4] hs20-client: Add more debugging messages. - - - - --- 2015-04-01 Ben Greear Accepted
[PATCH-v2,1/4] hs20-ca: improve setup.sh and .conf for more flexibility. - - - - --- 2015-04-01 Ben Greear Accepted
hostapd: fix some compilation errors - - - - --- 2015-03-29 Eliad Peller Accepted
[v2] P2P: Optimize scan frequencies list when re-joining a persistent group - - - - --- 2015-03-29 Peer, Ilan Accepted
wpa_cli: Use tab as only word separator for networks - - - - --- 2015-03-27 Mikael Kanstrup Accepted
[11/12] radius/db: Improve error messages related to EAP DB. - - - - --- 2015-03-26 Ben Greear Accepted
[10/12] hostapd-config: Error out if user configures sqlite db without CONFIG_SQLITE. - - - - --- 2015-03-26 Ben Greear Accepted
[09/12] hs20-client: Add more logging. - - - - --- 2015-03-26 Ben Greear Accepted
[07/12] hs20-spp: Improve logging. - - - - --- 2015-03-26 Ben Greear Accepted
[06/12] http-curl: improve log messages. - - - - --- 2015-03-26 Ben Greear Accepted
[04/12] hs20-signup: print out ID if there is some problem with it. - - - - --- 2015-03-26 Ben Greear Accepted
[03/12] osu-client: Remove un-used argument identifier, fix typo. - - - - --- 2015-03-26 Ben Greear Accepted
[02/12] hs20: Allow custom lib-curl linkage. - - - - --- 2015-03-26 Ben Greear Accepted
[5/5] wpa_cli: Completion routine for dup_network command - - - - --- 2015-03-24 Mikael Kanstrup Accepted
[4/5] wpa_cli: Completion for remove, select, disable, enable network - - - - --- 2015-03-24 Mikael Kanstrup Accepted
[3/5] wpa_cli: Implement completion routine for get_network/set_network - - - - --- 2015-03-24 Mikael Kanstrup Accepted
[2/5] wpa_cli: Keep track of available networks - - - - --- 2015-03-24 Mikael Kanstrup Accepted
[1/5] wpa_cli: Allow tab as alternative separator for cli_txt_list words - - - - --- 2015-03-24 Mikael Kanstrup Accepted
AP: Unset HT capabilities for an HT association request without WMM - - - - --- 2015-03-24 Peer, Ilan Accepted
[1/1] STA: Add support for Virtual Interface creation/deletion - - - - --- 2015-03-20 Jithu Jance Accepted
[5/5] Remove unused shared_freq driver op - - - - --- 2015-03-19 Eliad Peller Accepted
[4/5] DFS: fix range availability check - - - - --- 2015-03-19 Eliad Peller Accepted
[3/5] DFS: consider non contiguous channels - - - - --- 2015-03-19 Eliad Peller Accepted
[1/5] wpa_s: restart sched scan on channel list change - - - - --- 2015-03-19 Eliad Peller Accepted
driver_nl80211: fix vendor command handling - - - - --- 2015-03-18 Zefir Kurtisi Accepted
wpa_cli: Use .wpa_cli_history under Android - - - - --- 2015-03-18 Mikael Kanstrup Accepted
wpa-cli: Show OSEN scan results properly. - - - - --- 2015-03-17 Ben Greear Accepted
wpa_supplicant: Add extended capabilities IE to probe requests - - - - --- 2015-03-16 Peer, Ilan Accepted
[2/3] wpa_supplicant: Delay AP selection if all networks are temporarily disabled - - - - --- 2015-03-16 Peer, Ilan Accepted
[1/3] wpa_supplicant: Don't optimize scan frequencies if selected network has changed - - - - --- 2015-03-16 Peer, Ilan Accepted
[4/4] P2PS: extend p2p_service_del asp to support 'all' parameter - - - - --- 2015-03-16 Peer, Ilan Accepted
[3/4] P2PS: add P2PS advertisements on ALL_SERVICES ANQP query - - - - --- 2015-03-16 Peer, Ilan Accepted
[2/4] P2PS: delete ASP advertisements on wpas_p2p_service_flush - - - - --- 2015-03-16 Peer, Ilan Accepted
[1/4] P2PS: update SD indicator value on asp add/del/update - - - - --- 2015-03-16 Peer, Ilan Accepted
wpa_gui: documentation update - - - - --- 2015-03-15 Arkadiusz (Arkq) Bokowy Accepted
[2/2] wpa_gui-qt4: tray icon based signal strength meter - - - - --- 2015-03-15 Arkadiusz (Arkq) Bokowy Accepted
[3/3] wpa_cli: Add missing parameters for "set" command completion routine - - - - --- 2015-03-14 Mikael Kanstrup Accepted
[2/3] wpa_cli: Add completion routine for "get" command - - - - --- 2015-03-14 Mikael Kanstrup Accepted
[1/3] Add ipv4 support function for "get" control interface command - - - - --- 2015-03-14 Mikael Kanstrup Accepted
nl80211: handle NL80211_ATTR_EXT_FEATURES attribut - - - - --- 2015-03-10 Janusz.Dziedzic@tieto.com Accepted
[v2] Pinned certificates are always accepted - - - - --- 2015-03-04 Rohit Agrawal Accepted
[2/2] hwsim tests: allow running with arbitrary working directory - - - - --- 2015-03-03 Johannes Berg Accepted
[1/2] parallel-vm.py: use argparse module - - - - --- 2015-03-03 Johannes Berg Accepted
hwsim tests: fix python typo - - - - --- 2015-03-03 Johannes Berg Accepted
P2P: Prevent p2p connect misuse - - - - --- 2015-03-01 Jouni Malinen Accepted
[v2] P2P: prevent p2pdev from roaming - - - - --- 2015-03-01 Jouni Malinen Accepted
[v3] hostapd: Disable VHT caps for STAs when no valid VHT MCS found - - - - --- 2015-02-28 Rajkumar Manoharan Accepted
Adjusting wpa_ctrl.c for use in/by external programs - - - - --- 2015-02-21 Jouni Malinen Accepted
[4/4] ibss: add support for VHT80 configuration - - - - --- 2015-02-19 Janusz.Dziedzic@tieto.com Accepted
[3/4] hostap: make hostapd_set_freq_params() common - - - - --- 2015-02-19 Janusz.Dziedzic@tieto.com Accepted
[2/4] ibss: fix control freq if IBSS already found - - - - --- 2015-02-19 Janusz.Dziedzic@tieto.com Accepted
[1/4] ibss: add fixed freq ssid param - - - - --- 2015-02-19 Janusz.Dziedzic@tieto.com Accepted
[7/7] wpa_supplicant: update current BSS level when signal change event occurs - - - - --- 2015-02-18 Peer, Ilan Accepted
[6/7] wpa_supplicant: Cancel sched_scan when stopping countermeasures - - - - --- 2015-02-18 Peer, Ilan Accepted
[5/7] nl80211: Add support for configuring P2P GO ctwindow - - - - --- 2015-02-18 Peer, Ilan Accepted
[4/7] P2P: Allow configuring ctwindow when working as GO - - - - --- 2015-02-18 Peer, Ilan Accepted
[3/7] TDLS: allow extra erroneous IEs in all packets - - - - --- 2015-02-18 Peer, Ilan Accepted
[2/7] HS 2.0: Add support to update the ANQP Capability List into the BSS - - - - --- 2015-02-18 Peer, Ilan Accepted
[1/7] HS 2.0: Add support to update the HS20 Capability List into the BSS. - - - - --- 2015-02-18 Peer, Ilan Accepted
[1/2] wpa_gui-qt4: debug enhancement - - - - --- 2015-02-14 Arkadiusz (Arkq) Bokowy Accepted
Use priority list instead of global for PNO - - - - --- 2015-02-10 Dmitry Shmidt Accepted
IBSS: don't enable HT when WEP configuration - - - - --- 2015-02-06 Janusz.Dziedzic@tieto.com Accepted
AP: Do not reply to probe request with DS IE mismatch - - - - --- 2015-02-06 Peer, Ilan Accepted
[7/7] tests: Use the global control interface in test_nfc_p2p.py (continued) - - - - --- 2015-02-06 Peer, Ilan Accepted
[6/7] tests: Use the global control interface in test_nfc_p2p.py - - - - --- 2015-02-06 Peer, Ilan Accepted
[5/7] tests: Modify test_autogo_bridge() test to use group interface - - - - --- 2015-02-06 Peer, Ilan Accepted
[4/7] tests: Modify test_p2p_discovery to use global and group interfaces - - - - --- 2015-02-06 Peer, Ilan Accepted
[3/7] tests: Use the group control interface in test_p2p_channel_avoid() - - - - --- 2015-02-06 Peer, Ilan Accepted
[2/7] tests: Use group control interface in test_autogo() - - - - --- 2015-02-06 Peer, Ilan Accepted
[1/7] tests: Use global control interface in test_wpas_ctrl_global() - - - - --- 2015-02-06 Peer, Ilan Accepted
ACS seems not to select the best channel in 2.4GHz. - - - - --- 2015-02-05 Jouni Malinen Accepted
[3/3] mesh: Fix remaining BLOCKED state after SAE auth failure - - - - --- 2015-02-05 Masashi Honma Accepted
[2/3] mesh: Fire event on SAE authentication blocked - - - - --- 2015-02-05 Masashi Honma Accepted
[1/3] mesh: Fire event on SAE authentication failure - - - - --- 2015-02-05 Masashi Honma Accepted
[24/24] tests: Use global control interface in test_p2p_concurrency - - - - --- 2015-02-04 Peer, Ilan Accepted
[23/24] tests: Use global control interface in test_p2p_service - - - - --- 2015-02-04 Peer, Ilan Accepted
[22/24] tests: Modify test_p2p_discovery to use global control interface - - - - --- 2015-02-04 Peer, Ilan Accepted
[21/24] tests: Add printk tracer to trace-cmd - - - - --- 2015-02-04 Peer, Ilan Accepted
[20/24] tests: Modify tests in test_ap_pmf to use own_addr - - - - --- 2015-02-04 Peer, Ilan Accepted
[19/24] tests: Modify tests in test_hapd_ctrl to use own_addr - - - - --- 2015-02-04 Peer, Ilan Accepted
[18/24] tests: Fix test ap_wps_per_station_psk() to use own_addr - - - - --- 2015-02-04 Peer, Ilan Accepted
[15/24] tests: Fix test_ap_psk() to use own_addr - - - - --- 2015-02-04 Peer, Ilan Accepted
[14/24] tests: Fix destination address in ap_hs20_remediation_required_ctrl() - - - - --- 2015-02-04 Peer, Ilan Accepted
[13/24] tests: Use get_bss with ifname in test_autogo() - - - - --- 2015-02-04 Peer, Ilan Accepted
[12/24] tests: Add option to specify ifname to get_bss - - - - --- 2015-02-04 Peer, Ilan Accepted
[11/24] tests: Use the global control interface in test_p2p_grpform - - - - --- 2015-02-04 Peer, Ilan Accepted
[10/24] tests: Use global_request for SET commands in test_p2p_grpform - - - - --- 2015-02-04 Peer, Ilan Accepted
[09/24] tests: Update group ifname in p2p_go_invite_auth() - - - - --- 2015-02-04 Peer, Ilan Accepted
[08/24] tests: Use global control interface in test_discovery_dev_id() - - - - --- 2015-02-04 Peer, Ilan Accepted
[05/24] tests: Modify test_autogo_legacy() to use the group interface - - - - --- 2015-02-04 Peer, Ilan Accepted
[01/24] tests: Use global control interface in wait_go_ending_session() - - - - --- 2015-02-04 Peer, Ilan Accepted
mesh: Fix inactivity timer for 32 bit system - - - - --- 2015-02-04 Masashi Honma Accepted
[2/2] mesh: create new station entry on popen frames - - - - --- 2015-01-27 Bob Copeland Accepted
[1/2] mesh: always free the station if peering failed - - - - --- 2015-01-27 Bob Copeland Accepted
[1/3] mesh: Sync plink state with kernel - - - - --- 2015-01-22 Masashi Honma Accepted
« 1 2 ... 27 28 29 … 72 73 »