@@ -20,40 +20,31 @@
#include <pthreadP.h>
#include <shlib-compat.h>
-int
-__pthread_kill_internal (pthread_t threadid, int signo)
+static int
+tgkill_callback (struct pthread *unused, pid_t tid, void *closure)
{
- pid_t tid;
- struct pthread *pd = (struct pthread *) threadid;
-
- if (pd == THREAD_SELF)
- /* It is a special case to handle raise() implementation after a vfork
- call (which does not update the PD tid field). */
- tid = INLINE_SYSCALL_CALL (gettid);
+ int signo = (intptr_t) closure;
+ if (tid == 0)
+ /* Thread is exiting or has exited. The signal is not observable
+ either way, so do not send it. POSIX specifies the ESRCH error
+ only for the case when the lifetime of a thread ID has ended,
+ but calling pthread_kill on such a thread ID is undefined in
+ glibc. Therefore, do not treat kernel thread exit as an error. */
+ return 0;
else
- /* Force load of pd->tid into local variable or register. Otherwise
- if a thread exits between ESRCH test and tgkill, we might return
- EINVAL, because pd->tid would be cleared by the kernel. */
- tid = atomic_forced_read (pd->tid);
-
- int val;
- if (__glibc_likely (tid > 0))
{
- pid_t pid = __getpid ();
-
- val = INTERNAL_SYSCALL_CALL (tgkill, pid, tid, signo);
- val = (INTERNAL_SYSCALL_ERROR_P (val)
- ? INTERNAL_SYSCALL_ERRNO (val) : 0);
+ /* Using tgkill is a safety measure. __pthread_call_with_tid
+ ensures that the TID is still live at the point of the call. */
+ int ret = INTERNAL_SYSCALL_CALL (tgkill, __getpid (), tid, signo);
+ return INTERNAL_SYSCALL_ERROR_P (ret) ? INTERNAL_SYSCALL_ERRNO (ret) : 0;
}
- else
- /* The kernel reports that the thread has exited. POSIX specifies
- the ESRCH error only for the case when the lifetime of a thread
- ID has ended, but calling pthread_kill on such a thread ID is
- undefined in glibc. Therefore, do not treat kernel thread exit
- as an error. */
- val = 0;
+}
- return val;
+int
+__pthread_kill_internal (pthread_t threadid, int signo)
+{
+ return __pthread_call_with_tid (threadid, tgkill_callback,
+ (void *) (intptr_t) signo);
}
int
@@ -119,7 +119,9 @@ tests += tst-cnd-basic tst-mtx-trylock tst-cnd-broadcast \
tst-unwind-thread \
tst-pt-vfork1 tst-pt-vfork2 tst-vfork1x tst-vfork2x \
tst-pthread_cancel-exited \
+ tst-pthread_cancel-select-loop \
tst-pthread_kill-exited \
+ tst-pthread_kill-exiting \
# tests
tests-time64 := \
deleted file mode 100644
@@ -1,90 +0,0 @@
-/* Copyright (C) 2003-2021 Free Software Foundation, Inc.
- This file is part of the GNU C Library.
- Contributed by Ulrich Drepper <drepper@redhat.com>, 2003.
-
- The GNU C Library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Lesser General Public
- License as published by the Free Software Foundation; either
- version 2.1 of the License, or (at your option) any later version.
-
- The GNU C Library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- Lesser General Public License for more details.
-
- You should have received a copy of the GNU Lesser General Public
- License along with the GNU C Library; if not, see
- <https://www.gnu.org/licenses/>. */
-
-#include <errno.h>
-#include <pthread.h>
-#include <signal.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-
-
-static void *
-tf (void *a)
-{
- return NULL;
-}
-
-
-int
-do_test (void)
-{
- pthread_attr_t at;
- if (pthread_attr_init (&at) != 0)
- {
- puts ("attr_create failed");
- exit (1);
- }
-
- /* Limit thread stack size, because if it is too large, pthread_join
- will free it immediately rather than put it into stack cache. */
- if (pthread_attr_setstacksize (&at, 2 * 1024 * 1024) != 0)
- {
- puts ("setstacksize failed");
- exit (1);
- }
-
- pthread_t th;
- if (pthread_create (&th, &at, tf, NULL) != 0)
- {
- puts ("create failed");
- exit (1);
- }
-
- pthread_attr_destroy (&at);
-
- if (pthread_join (th, NULL) != 0)
- {
- puts ("join failed");
- exit (1);
- }
-
- /* The following only works because we assume here something about
- the implementation. Namely, that the memory allocated for the
- thread descriptor is not going away, that the TID field is
- cleared and therefore the signal is sent to process 0, and that
- we can savely assume there is no other process with this ID at
- that time. */
- int e = pthread_kill (th, 0);
- if (e == 0)
- {
- puts ("pthread_kill succeeded");
- exit (1);
- }
- if (e != ESRCH)
- {
- puts ("pthread_kill didn't return ESRCH");
- exit (1);
- }
-
- return 0;
-}
-
-
-#define TEST_FUNCTION do_test ()
-#include "../test-skeleton.c"
new file mode 100644
@@ -0,0 +1,87 @@
+/* Test that pthread_cancel succeeds during thread exit.
+ Copyright (C) 2021 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, see
+ <https://www.gnu.org/licenses/>. */
+
+/* This test tries to trigger an internal race condition in
+ pthread_cancel, where the cancellation signal is sent after the
+ thread has begun the cancellation process. This can result in a
+ spurious ESRCH error. For the original bug 12889, the window is
+ quite small, so the bug was not reproduced in every run. */
+
+#include <stdbool.h>
+#include <stddef.h>
+#include <support/check.h>
+#include <support/xthread.h>
+#include <support/xunistd.h>
+#include <sys/select.h>
+#include <unistd.h>
+
+/* Set to true by timeout_thread_function when the test should
+ terminate. */
+static bool timeout;
+
+static void *
+timeout_thread_function (void *unused)
+{
+ usleep (5 * 1000 * 1000);
+ __atomic_store_n (&timeout, true, __ATOMIC_RELAXED);
+ return NULL;
+}
+
+/* Used for blocking the select function below. */
+static int pipe_fds[2];
+
+static void *
+canceled_thread_function (void *unused)
+{
+ while (true)
+ {
+ fd_set rfs;
+ fd_set wfs;
+ fd_set efs;
+ FD_ZERO (&rfs);
+ FD_ZERO (&wfs);
+ FD_ZERO (&efs);
+ FD_SET (pipe_fds[0], &rfs);
+
+ /* If the cancellation request is recognized early, the thread
+ begins exiting while the cancellation signal arrives. */
+ select (FD_SETSIZE, &rfs, &wfs, &efs, NULL);
+ }
+ return NULL;
+}
+
+static int
+do_test (void)
+{
+ xpipe (pipe_fds);
+ pthread_t thr_timeout = xpthread_create (NULL, timeout_thread_function, NULL);
+
+ while (!__atomic_load_n (&timeout, __ATOMIC_RELAXED))
+ {
+ pthread_t thr = xpthread_create (NULL, canceled_thread_function, NULL);
+ xpthread_cancel (thr);
+ TEST_VERIFY (xpthread_join (thr) == PTHREAD_CANCELED);
+ }
+
+ xpthread_join (thr_timeout);
+ xclose (pipe_fds[0]);
+ xclose (pipe_fds[1]);
+ return 0;
+}
+
+#include <support/test-driver.c>
new file mode 100644
@@ -0,0 +1,110 @@
+/* Test that pthread_kill succeeds during thread exit.
+ Copyright (C) 2021 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, see
+ <https://www.gnu.org/licenses/>. */
+
+/* This test verifies that pthread_kill for a thread that is exiting
+ succeeds (with or without actually delivering the signal). */
+
+#include <array_length.h>
+#include <stdbool.h>
+#include <stddef.h>
+#include <support/xsignal.h>
+#include <support/xthread.h>
+#include <unistd.h>
+
+/* Set to true by timeout_thread_function when the test should
+ terminate. */
+static bool timeout;
+
+static void *
+timeout_thread_function (void *unused)
+{
+ usleep (1000 * 1000);
+ __atomic_store_n (&timeout, true, __ATOMIC_RELAXED);
+ return NULL;
+}
+
+/* Used to synchronize the sending threads with the target thread and
+ main thread. */
+static pthread_barrier_t barrier_1;
+static pthread_barrier_t barrier_2;
+
+/* The target thread to which signals are to be sent. */
+static pthread_t target_thread;
+
+static void *
+sender_thread_function (void *unused)
+{
+ while (!__atomic_load_n (&timeout, __ATOMIC_RELAXED))
+ {
+ /* Wait until target_thread has been initialized. The target
+ thread and main thread participate in this barrier. */
+ xpthread_barrier_wait (&barrier_1);
+
+ xpthread_kill (target_thread, SIGUSR1);
+
+ /* Communicate that the signal has been sent. The main thread
+ participates in this barrier. */
+ xpthread_barrier_wait (&barrier_2);
+ }
+ return NULL;
+}
+
+static void *
+target_thread_function (void *unused)
+{
+ target_thread = pthread_self ();
+ xpthread_barrier_wait (&barrier_1);
+ return NULL;
+}
+
+static int
+do_test (void)
+{
+ xsignal (SIGUSR1, SIG_IGN);
+
+ pthread_t thr_timeout = xpthread_create (NULL, timeout_thread_function, NULL);
+
+ pthread_t threads[4];
+ xpthread_barrier_init (&barrier_1, NULL, array_length (threads) + 2);
+ xpthread_barrier_init (&barrier_2, NULL, array_length (threads) + 1);
+
+ for (int i = 0; i < array_length (threads); ++i)
+ threads[i] = xpthread_create (NULL, sender_thread_function, NULL);
+
+ while (!__atomic_load_n (&timeout, __ATOMIC_RELAXED))
+ {
+ xpthread_create (NULL, target_thread_function, NULL);
+
+ /* Wait for the target thread to be set up and signal sending to
+ start. */
+ xpthread_barrier_wait (&barrier_1);
+
+ /* Wait for signal sending to complete. */
+ xpthread_barrier_wait (&barrier_2);
+
+ xpthread_join (target_thread);
+ }
+
+ for (int i = 0; i < array_length (threads); ++i)
+ xpthread_join (threads[i]);
+ xpthread_join (thr_timeout);
+
+ return 0;
+}
+
+#include <support/test-driver.c>