diff mbox series

[v4,2/2] x86: Optimize strlen-avx2.S

Message ID 20210419184345.2576413-2-goldstein.w.n@gmail.com
State New
Headers show
Series [v4,1/2] x86: Optimize strlen-evex.S | expand

Commit Message

Noah Goldstein April 19, 2021, 6:43 p.m. UTC
No bug. This commit optimizes strlen-avx2.S. The optimizations are
mostly small things but they add up to roughly 10-30% performance
improvement for strlen. The results for strnlen are bit more
ambiguous. test-strlen, test-strnlen, test-wcslen, and test-wcsnlen
are all passing.

Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
---
 sysdeps/x86_64/multiarch/ifunc-impl-list.c |  16 +-
 sysdeps/x86_64/multiarch/strlen-avx2.S     | 535 +++++++++++++--------
 2 files changed, 337 insertions(+), 214 deletions(-)

Comments

H.J. Lu April 19, 2021, 10:16 p.m. UTC | #1
On Mon, Apr 19, 2021 at 02:43:45PM -0400, Noah Goldstein wrote:
> No bug. This commit optimizes strlen-avx2.S. The optimizations are
> mostly small things but they add up to roughly 10-30% performance
> improvement for strlen. The results for strnlen are bit more
> ambiguous. test-strlen, test-strnlen, test-wcslen, and test-wcsnlen
> are all passing.
> 
> Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
> ---
>  sysdeps/x86_64/multiarch/ifunc-impl-list.c |  16 +-
>  sysdeps/x86_64/multiarch/strlen-avx2.S     | 535 +++++++++++++--------
>  2 files changed, 337 insertions(+), 214 deletions(-)
> 
> diff --git a/sysdeps/x86_64/multiarch/ifunc-impl-list.c b/sysdeps/x86_64/multiarch/ifunc-impl-list.c
> index 0b0927b124..4613bead7c 100644
> --- a/sysdeps/x86_64/multiarch/ifunc-impl-list.c
> +++ b/sysdeps/x86_64/multiarch/ifunc-impl-list.c
> @@ -285,10 +285,12 @@ __libc_ifunc_impl_list (const char *name, struct libc_ifunc_impl *array,
>    /* Support sysdeps/x86_64/multiarch/strlen.c.  */
>    IFUNC_IMPL (i, name, strlen,
>  	      IFUNC_IMPL_ADD (array, i, strlen,
> -			      CPU_FEATURE_USABLE (AVX2),
> +			      (CPU_FEATURE_USABLE (AVX2)
> +			       && CPU_FEATURE_USABLE (BMI2)),
>  			      __strlen_avx2)
>  	      IFUNC_IMPL_ADD (array, i, strlen,
>  			      (CPU_FEATURE_USABLE (AVX2)
> +			       && CPU_FEATURE_USABLE (BMI2)
>  			       && CPU_FEATURE_USABLE (RTM)),
>  			      __strlen_avx2_rtm)
>  	      IFUNC_IMPL_ADD (array, i, strlen,
> @@ -301,10 +303,12 @@ __libc_ifunc_impl_list (const char *name, struct libc_ifunc_impl *array,
>    /* Support sysdeps/x86_64/multiarch/strnlen.c.  */
>    IFUNC_IMPL (i, name, strnlen,
>  	      IFUNC_IMPL_ADD (array, i, strnlen,
> -			      CPU_FEATURE_USABLE (AVX2),
> +			      (CPU_FEATURE_USABLE (AVX2)
> +			       && CPU_FEATURE_USABLE (BMI2)),
>  			      __strnlen_avx2)
>  	      IFUNC_IMPL_ADD (array, i, strnlen,
>  			      (CPU_FEATURE_USABLE (AVX2)
> +			       && CPU_FEATURE_USABLE (BMI2)
>  			       && CPU_FEATURE_USABLE (RTM)),
>  			      __strnlen_avx2_rtm)
>  	      IFUNC_IMPL_ADD (array, i, strnlen,
> @@ -646,10 +650,12 @@ __libc_ifunc_impl_list (const char *name, struct libc_ifunc_impl *array,
>    /* Support sysdeps/x86_64/multiarch/wcslen.c.  */
>    IFUNC_IMPL (i, name, wcslen,
>  	      IFUNC_IMPL_ADD (array, i, wcslen,
> -			      CPU_FEATURE_USABLE (AVX2),
> +			      (CPU_FEATURE_USABLE (AVX2)
> +			       && CPU_FEATURE_USABLE (BMI2)),
>  			      __wcslen_avx2)
>  	      IFUNC_IMPL_ADD (array, i, wcslen,
>  			      (CPU_FEATURE_USABLE (AVX2)
> +			       && CPU_FEATURE_USABLE (BMI2)
>  			       && CPU_FEATURE_USABLE (RTM)),
>  			      __wcslen_avx2_rtm)
>  	      IFUNC_IMPL_ADD (array, i, wcslen,
> @@ -662,10 +668,12 @@ __libc_ifunc_impl_list (const char *name, struct libc_ifunc_impl *array,
>    /* Support sysdeps/x86_64/multiarch/wcsnlen.c.  */
>    IFUNC_IMPL (i, name, wcsnlen,
>  	      IFUNC_IMPL_ADD (array, i, wcsnlen,
> -			      CPU_FEATURE_USABLE (AVX2),
> +			      (CPU_FEATURE_USABLE (AVX2)
> +			       && CPU_FEATURE_USABLE (BMI2)),
>  			      __wcsnlen_avx2)
>  	      IFUNC_IMPL_ADD (array, i, wcsnlen,
>  			      (CPU_FEATURE_USABLE (AVX2)
> +			       && CPU_FEATURE_USABLE (BMI2)
>  			       && CPU_FEATURE_USABLE (RTM)),
>  			      __wcsnlen_avx2_rtm)
>  	      IFUNC_IMPL_ADD (array, i, wcsnlen,
> diff --git a/sysdeps/x86_64/multiarch/strlen-avx2.S b/sysdeps/x86_64/multiarch/strlen-avx2.S
> index 1caae9e6bc..eb92f587b4 100644
> --- a/sysdeps/x86_64/multiarch/strlen-avx2.S
> +++ b/sysdeps/x86_64/multiarch/strlen-avx2.S
> @@ -27,9 +27,11 @@
>  # ifdef USE_AS_WCSLEN
>  #  define VPCMPEQ	vpcmpeqd
>  #  define VPMINU	vpminud
> +#  define CHAR_SIZE	4
>  # else
>  #  define VPCMPEQ	vpcmpeqb
>  #  define VPMINU	vpminub
> +#  define CHAR_SIZE	1
>  # endif
>  
>  # ifndef VZEROUPPER
> @@ -41,349 +43,462 @@
>  # endif
>  
>  # define VEC_SIZE 32
> +# define PAGE_SIZE 4096
> +# define LOG_PAGE_SIZE 12
>  
>  	.section SECTION(.text),"ax",@progbits
>  ENTRY (STRLEN)
>  # ifdef USE_AS_STRNLEN
> -	/* Check for zero length.  */
> +	/* Check zero length.  */
>  	test	%RSI_LP, %RSI_LP
>  	jz	L(zero)
> +	/* Store max len in R8_LP before adjusting if using WCSLEN.  */
> +	mov	%RSI_LP, %R8_LP
>  #  ifdef USE_AS_WCSLEN
>  	shl	$2, %RSI_LP
>  #  elif defined __ILP32__
>  	/* Clear the upper 32 bits.  */
>  	movl	%esi, %esi
>  #  endif
> -	mov	%RSI_LP, %R8_LP
>  # endif
> -	movl	%edi, %ecx
> +	movl	%edi, %eax
>  	movq	%rdi, %rdx
>  	vpxor	%xmm0, %xmm0, %xmm0
> -
> +	/* Shift left eax to clear all bits not relevant to page cross
> +	   check. This saves 2 bytes of code as opposed to using andl with
> +	   PAGE_SIZE - 1. Then compare with PAGE_SIZE - VEC_SIZE shifted
> +	   left by the same amount (an imm32 either way).  */
> +	sall	$(32 - LOG_PAGE_SIZE), %eax

I prefer AND over SAL for better throughput.

H.J.
>  	/* Check if we may cross page boundary with one vector load.  */
> -	andl	$(2 * VEC_SIZE - 1), %ecx
> -	cmpl	$VEC_SIZE, %ecx
> -	ja	L(cros_page_boundary)
> +	cmpl	$((PAGE_SIZE - VEC_SIZE) << (32 - LOG_PAGE_SIZE)), %eax
> +	ja	L(cross_page_boundary)
>  
>  	/* Check the first VEC_SIZE bytes.  */
> -	VPCMPEQ (%rdi), %ymm0, %ymm1
> -	vpmovmskb %ymm1, %eax
> -	testl	%eax, %eax
> -
> +	VPCMPEQ	(%rdi), %ymm0, %ymm1
> +	vpmovmskb	%ymm1, %eax
>  # ifdef USE_AS_STRNLEN
> -	jnz	L(first_vec_x0_check)
> -	/* Adjust length and check the end of data.  */
> -	subq	$VEC_SIZE, %rsi
> -	jbe	L(max)
> -# else
> -	jnz	L(first_vec_x0)
> +	/* If length < VEC_SIZE handle special.  */
> +	cmpq	$VEC_SIZE, %rsi
> +	jbe	L(first_vec_x0)
>  # endif
> -
> -	/* Align data for aligned loads in the loop.  */
> -	addq	$VEC_SIZE, %rdi
> -	andl	$(VEC_SIZE - 1), %ecx
> -	andq	$-VEC_SIZE, %rdi
> +	/* If empty continue to aligned_more. Otherwise return bit
> +	   position of first match.  */
> +	testl	%eax, %eax
> +	jz	L(aligned_more)
> +	tzcntl	%eax, %eax
> +# ifdef USE_AS_WCSLEN
> +	shrl	$2, %eax
> +# endif
> +	VZEROUPPER_RETURN
>  
>  # ifdef USE_AS_STRNLEN
> -	/* Adjust length.  */
> -	addq	%rcx, %rsi
> +L(zero):
> +	xorl	%eax, %eax
> +	ret
>  
> -	subq	$(VEC_SIZE * 4), %rsi
> -	jbe	L(last_4x_vec_or_less)
> +	.p2align 4
> +L(first_vec_x0):
> +	/* Set bit for max len so that tzcnt will return min of max len
> +	   and position of first match.  */
> +	btsq	%rsi, %rax
> +	tzcntl	%eax, %eax
> +#  ifdef USE_AS_WCSLEN
> +	shrl	$2, %eax
> +#  endif
> +	VZEROUPPER_RETURN
>  # endif
> -	jmp	L(more_4x_vec)
>  
>  	.p2align 4
> -L(cros_page_boundary):
> -	andl	$(VEC_SIZE - 1), %ecx
> -	andq	$-VEC_SIZE, %rdi
> -	VPCMPEQ (%rdi), %ymm0, %ymm1
> -	vpmovmskb %ymm1, %eax
> -	/* Remove the leading bytes.  */
> -	sarl	%cl, %eax
> -	testl	%eax, %eax
> -	jz	L(aligned_more)
> +L(first_vec_x1):
>  	tzcntl	%eax, %eax
> +	/* Safe to use 32 bit instructions as these are only called for
> +	   size = [1, 159].  */
>  # ifdef USE_AS_STRNLEN
> -	/* Check the end of data.  */
> -	cmpq	%rax, %rsi
> -	jbe	L(max)
> +	/* Use ecx which was computed earlier to compute correct value.
> +	 */
> +	subl	$(VEC_SIZE * 4 + 1), %ecx
> +	addl	%ecx, %eax
> +# else
> +	subl	%edx, %edi
> +	incl	%edi
> +	addl	%edi, %eax
>  # endif
> -	addq	%rdi, %rax
> -	addq	%rcx, %rax
> -	subq	%rdx, %rax
>  # ifdef USE_AS_WCSLEN
> -	shrq	$2, %rax
> +	shrl	$2, %eax
>  # endif
> -L(return_vzeroupper):
> -	ZERO_UPPER_VEC_REGISTERS_RETURN
> +	VZEROUPPER_RETURN
>  
>  	.p2align 4
> -L(aligned_more):
> +L(first_vec_x2):
> +	tzcntl	%eax, %eax
> +	/* Safe to use 32 bit instructions as these are only called for
> +	   size = [1, 159].  */
>  # ifdef USE_AS_STRNLEN
> -        /* "rcx" is less than VEC_SIZE.  Calculate "rdx + rcx - VEC_SIZE"
> -	    with "rdx - (VEC_SIZE - rcx)" instead of "(rdx + rcx) - VEC_SIZE"
> -	    to void possible addition overflow.  */
> -	negq	%rcx
> -	addq	$VEC_SIZE, %rcx
> -
> -	/* Check the end of data.  */
> -	subq	%rcx, %rsi
> -	jbe	L(max)
> +	/* Use ecx which was computed earlier to compute correct value.
> +	 */
> +	subl	$(VEC_SIZE * 3 + 1), %ecx
> +	addl	%ecx, %eax
> +# else
> +	subl	%edx, %edi
> +	addl	$(VEC_SIZE + 1), %edi
> +	addl	%edi, %eax
>  # endif
> +# ifdef USE_AS_WCSLEN
> +	shrl	$2, %eax
> +# endif
> +	VZEROUPPER_RETURN
>  
> -	addq	$VEC_SIZE, %rdi
> +	.p2align 4
> +L(first_vec_x3):
> +	tzcntl	%eax, %eax
> +	/* Safe to use 32 bit instructions as these are only called for
> +	   size = [1, 159].  */
> +# ifdef USE_AS_STRNLEN
> +	/* Use ecx which was computed earlier to compute correct value.
> +	 */
> +	subl	$(VEC_SIZE * 2 + 1), %ecx
> +	addl	%ecx, %eax
> +# else
> +	subl	%edx, %edi
> +	addl	$(VEC_SIZE * 2 + 1), %edi
> +	addl	%edi, %eax
> +# endif
> +# ifdef USE_AS_WCSLEN
> +	shrl	$2, %eax
> +# endif
> +	VZEROUPPER_RETURN
>  
> +	.p2align 4
> +L(first_vec_x4):
> +	tzcntl	%eax, %eax
> +	/* Safe to use 32 bit instructions as these are only called for
> +	   size = [1, 159].  */
>  # ifdef USE_AS_STRNLEN
> -	subq	$(VEC_SIZE * 4), %rsi
> -	jbe	L(last_4x_vec_or_less)
> +	/* Use ecx which was computed earlier to compute correct value.
> +	 */
> +	subl	$(VEC_SIZE + 1), %ecx
> +	addl	%ecx, %eax
> +# else
> +	subl	%edx, %edi
> +	addl	$(VEC_SIZE * 3 + 1), %edi
> +	addl	%edi, %eax
>  # endif
> +# ifdef USE_AS_WCSLEN
> +	shrl	$2, %eax
> +# endif
> +	VZEROUPPER_RETURN
>  
> -L(more_4x_vec):
> +	.p2align 5
> +L(aligned_more):
> +	/* Align data to VEC_SIZE - 1. This is the same number of
> +	   instructions as using andq with -VEC_SIZE but saves 4 bytes of
> +	   code on the x4 check.  */
> +	orq	$(VEC_SIZE - 1), %rdi
> +L(cross_page_continue):
>  	/* Check the first 4 * VEC_SIZE.  Only one VEC_SIZE at a time
>  	   since data is only aligned to VEC_SIZE.  */
> -	VPCMPEQ (%rdi), %ymm0, %ymm1
> -	vpmovmskb %ymm1, %eax
> -	testl	%eax, %eax
> -	jnz	L(first_vec_x0)
> -
> -	VPCMPEQ VEC_SIZE(%rdi), %ymm0, %ymm1
> -	vpmovmskb %ymm1, %eax
> +# ifdef USE_AS_STRNLEN
> +	/* + 1 because rdi is aligned to VEC_SIZE - 1. + CHAR_SIZE because
> +	   it simplies the logic in last_4x_vec_or_less.  */
> +	leaq	(VEC_SIZE * 4 + CHAR_SIZE + 1)(%rdi), %rcx
> +	subq	%rdx, %rcx
> +# endif
> +	/* Load first VEC regardless.  */
> +	VPCMPEQ	1(%rdi), %ymm0, %ymm1
> +# ifdef USE_AS_STRNLEN
> +	/* Adjust length. If near end handle specially.  */
> +	subq	%rcx, %rsi
> +	jb	L(last_4x_vec_or_less)
> +# endif
> +	vpmovmskb	%ymm1, %eax
>  	testl	%eax, %eax
>  	jnz	L(first_vec_x1)
>  
> -	VPCMPEQ (VEC_SIZE * 2)(%rdi), %ymm0, %ymm1
> -	vpmovmskb %ymm1, %eax
> +	VPCMPEQ	(VEC_SIZE + 1)(%rdi), %ymm0, %ymm1
> +	vpmovmskb	%ymm1, %eax
>  	testl	%eax, %eax
>  	jnz	L(first_vec_x2)
>  
> -	VPCMPEQ (VEC_SIZE * 3)(%rdi), %ymm0, %ymm1
> -	vpmovmskb %ymm1, %eax
> +	VPCMPEQ	(VEC_SIZE * 2 + 1)(%rdi), %ymm0, %ymm1
> +	vpmovmskb	%ymm1, %eax
>  	testl	%eax, %eax
>  	jnz	L(first_vec_x3)
>  
> -	addq	$(VEC_SIZE * 4), %rdi
> -
> -# ifdef USE_AS_STRNLEN
> -	subq	$(VEC_SIZE * 4), %rsi
> -	jbe	L(last_4x_vec_or_less)
> -# endif
> -
> -	/* Align data to 4 * VEC_SIZE.  */
> -	movq	%rdi, %rcx
> -	andl	$(4 * VEC_SIZE - 1), %ecx
> -	andq	$-(4 * VEC_SIZE), %rdi
> +	VPCMPEQ	(VEC_SIZE * 3 + 1)(%rdi), %ymm0, %ymm1
> +	vpmovmskb	%ymm1, %eax
> +	testl	%eax, %eax
> +	jnz	L(first_vec_x4)
>  
> +	/* Align data to VEC_SIZE * 4 - 1.  */
>  # ifdef USE_AS_STRNLEN
> -	/* Adjust length.  */
> +	/* Before adjusting length check if at last VEC_SIZE * 4.  */
> +	cmpq	$(VEC_SIZE * 4 - 1), %rsi
> +	jbe	L(last_4x_vec_or_less_load)
> +	incq	%rdi
> +	movl	%edi, %ecx
> +	orq	$(VEC_SIZE * 4 - 1), %rdi
> +	andl	$(VEC_SIZE * 4 - 1), %ecx
> +	/* Readjust length.  */
>  	addq	%rcx, %rsi
> +# else
> +	incq	%rdi
> +	orq	$(VEC_SIZE * 4 - 1), %rdi
>  # endif
> -
> +	/* Compare 4 * VEC at a time forward.  */
>  	.p2align 4
>  L(loop_4x_vec):
> -	/* Compare 4 * VEC at a time forward.  */
> -	vmovdqa (%rdi), %ymm1
> -	vmovdqa	VEC_SIZE(%rdi), %ymm2
> -	vmovdqa	(VEC_SIZE * 2)(%rdi), %ymm3
> -	vmovdqa	(VEC_SIZE * 3)(%rdi), %ymm4
> -	VPMINU	%ymm1, %ymm2, %ymm5
> -	VPMINU	%ymm3, %ymm4, %ymm6
> -	VPMINU	%ymm5, %ymm6, %ymm5
> -
> -	VPCMPEQ	%ymm5, %ymm0, %ymm5
> -	vpmovmskb %ymm5, %eax
> -	testl	%eax, %eax
> -	jnz	L(4x_vec_end)
> -
> -	addq	$(VEC_SIZE * 4), %rdi
> -
> -# ifndef USE_AS_STRNLEN
> -	jmp	L(loop_4x_vec)
> -# else
> +# ifdef USE_AS_STRNLEN
> +	/* Break if at end of length.  */
>  	subq	$(VEC_SIZE * 4), %rsi
> -	ja	L(loop_4x_vec)
> -
> -L(last_4x_vec_or_less):
> -	/* Less than 4 * VEC and aligned to VEC_SIZE.  */
> -	addl	$(VEC_SIZE * 2), %esi
> -	jle	L(last_2x_vec)
> +	jb	L(last_4x_vec_or_less_cmpeq)
> +# endif
> +	/* Save some code size by microfusing VPMINU with the load. Since
> +	   the matches in ymm2/ymm4 can only be returned if there where no
> +	   matches in ymm1/ymm3 respectively there is no issue with overlap.
> +	 */
> +	vmovdqa	1(%rdi), %ymm1
> +	VPMINU	(VEC_SIZE + 1)(%rdi), %ymm1, %ymm2
> +	vmovdqa	(VEC_SIZE * 2 + 1)(%rdi), %ymm3
> +	VPMINU	(VEC_SIZE * 3 + 1)(%rdi), %ymm3, %ymm4
> +
> +	VPMINU	%ymm2, %ymm4, %ymm5
> +	VPCMPEQ	%ymm5, %ymm0, %ymm5
> +	vpmovmskb	%ymm5, %ecx
>  
> -	VPCMPEQ (%rdi), %ymm0, %ymm1
> -	vpmovmskb %ymm1, %eax
> -	testl	%eax, %eax
> -	jnz	L(first_vec_x0)
> +	subq	$-(VEC_SIZE * 4), %rdi
> +	testl	%ecx, %ecx
> +	jz	L(loop_4x_vec)
>  
> -	VPCMPEQ VEC_SIZE(%rdi), %ymm0, %ymm1
> -	vpmovmskb %ymm1, %eax
> -	testl	%eax, %eax
> -	jnz	L(first_vec_x1)
>  
> -	VPCMPEQ (VEC_SIZE * 2)(%rdi), %ymm0, %ymm1
> -	vpmovmskb %ymm1, %eax
> +	VPCMPEQ	%ymm1, %ymm0, %ymm1
> +	vpmovmskb	%ymm1, %eax
> +	subq	%rdx, %rdi
>  	testl	%eax, %eax
> +	jnz	L(last_vec_return_x0)
>  
> -	jnz	L(first_vec_x2_check)
> -	subl	$VEC_SIZE, %esi
> -	jle	L(max)
> -
> -	VPCMPEQ (VEC_SIZE * 3)(%rdi), %ymm0, %ymm1
> -	vpmovmskb %ymm1, %eax
> +	VPCMPEQ	%ymm2, %ymm0, %ymm2
> +	vpmovmskb	%ymm2, %eax
>  	testl	%eax, %eax
> -
> -	jnz	L(first_vec_x3_check)
> -	movq	%r8, %rax
> -#  ifdef USE_AS_WCSLEN
> +	jnz	L(last_vec_return_x1)
> +
> +	/* Combine last 2 VEC.  */
> +	VPCMPEQ	%ymm3, %ymm0, %ymm3
> +	vpmovmskb	%ymm3, %eax
> +	/* rcx has combined result from all 4 VEC. It will only be used if
> +	   the first 3 other VEC all did not contain a match.  */
> +	salq	$32, %rcx
> +	orq	%rcx, %rax
> +	tzcntq	%rax, %rax
> +	subq	$(VEC_SIZE * 2 - 1), %rdi
> +	addq	%rdi, %rax
> +# ifdef USE_AS_WCSLEN
>  	shrq	$2, %rax
> -#  endif
> +# endif
>  	VZEROUPPER_RETURN
>  
> +
> +# ifdef USE_AS_STRNLEN
>  	.p2align 4
> -L(last_2x_vec):
> -	addl	$(VEC_SIZE * 2), %esi
> -	VPCMPEQ (%rdi), %ymm0, %ymm1
> -	vpmovmskb %ymm1, %eax
> -	testl	%eax, %eax
> +L(last_4x_vec_or_less_load):
> +	/* Depending on entry adjust rdi / prepare first VEC in ymm1.  */
> +	subq	$-(VEC_SIZE * 4), %rdi
> +L(last_4x_vec_or_less_cmpeq):
> +	VPCMPEQ	1(%rdi), %ymm0, %ymm1
> +L(last_4x_vec_or_less):
>  
> -	jnz	L(first_vec_x0_check)
> -	subl	$VEC_SIZE, %esi
> -	jle	L(max)
> +	vpmovmskb	%ymm1, %eax
> +	/* If remaining length > VEC_SIZE * 2. This works if esi is off by
> +	   VEC_SIZE * 4.  */
> +	testl	$(VEC_SIZE * 2), %esi
> +	jnz	L(last_4x_vec)
>  
> -	VPCMPEQ VEC_SIZE(%rdi), %ymm0, %ymm1
> -	vpmovmskb %ymm1, %eax
> +	/* length may have been negative or positive by an offset of
> +	   VEC_SIZE * 4 depending on where this was called from. This fixes
> +	   that.  */
> +	andl	$(VEC_SIZE * 4 - 1), %esi
>  	testl	%eax, %eax
> -	jnz	L(first_vec_x1_check)
> -	movq	%r8, %rax
> -#  ifdef USE_AS_WCSLEN
> -	shrq	$2, %rax
> -#  endif
> -	VZEROUPPER_RETURN
> +	jnz	L(last_vec_x1_check)
>  
> -	.p2align 4
> -L(first_vec_x0_check):
> +	subl	$VEC_SIZE, %esi
> +	jb	L(max)
> +
> +	VPCMPEQ	(VEC_SIZE + 1)(%rdi), %ymm0, %ymm1
> +	vpmovmskb	%ymm1, %eax
>  	tzcntl	%eax, %eax
>  	/* Check the end of data.  */
> -	cmpq	%rax, %rsi
> -	jbe	L(max)
> +	cmpl	%eax, %esi
> +	jb	L(max)
> +	subq	%rdx, %rdi
> +	addl	$(VEC_SIZE + 1), %eax
>  	addq	%rdi, %rax
> -	subq	%rdx, %rax
>  #  ifdef USE_AS_WCSLEN
>  	shrq	$2, %rax
>  #  endif
>  	VZEROUPPER_RETURN
> +# endif
>  
>  	.p2align 4
> -L(first_vec_x1_check):
> +L(last_vec_return_x0):
>  	tzcntl	%eax, %eax
> -	/* Check the end of data.  */
> -	cmpq	%rax, %rsi
> -	jbe	L(max)
> -	addq	$VEC_SIZE, %rax
> +	subq	$(VEC_SIZE * 4 - 1), %rdi
>  	addq	%rdi, %rax
> -	subq	%rdx, %rax
> -#  ifdef USE_AS_WCSLEN
> +# ifdef USE_AS_WCSLEN
>  	shrq	$2, %rax
> -#  endif
> +# endif
>  	VZEROUPPER_RETURN
>  
>  	.p2align 4
> -L(first_vec_x2_check):
> +L(last_vec_return_x1):
>  	tzcntl	%eax, %eax
> -	/* Check the end of data.  */
> -	cmpq	%rax, %rsi
> -	jbe	L(max)
> -	addq	$(VEC_SIZE * 2), %rax
> +	subq	$(VEC_SIZE * 3 - 1), %rdi
>  	addq	%rdi, %rax
> -	subq	%rdx, %rax
> -#  ifdef USE_AS_WCSLEN
> +# ifdef USE_AS_WCSLEN
>  	shrq	$2, %rax
> -#  endif
> +# endif
>  	VZEROUPPER_RETURN
>  
> +# ifdef USE_AS_STRNLEN
>  	.p2align 4
> -L(first_vec_x3_check):
> +L(last_vec_x1_check):
> +
>  	tzcntl	%eax, %eax
>  	/* Check the end of data.  */
> -	cmpq	%rax, %rsi
> -	jbe	L(max)
> -	addq	$(VEC_SIZE * 3), %rax
> +	cmpl	%eax, %esi
> +	jb	L(max)
> +	subq	%rdx, %rdi
> +	incl	%eax
>  	addq	%rdi, %rax
> -	subq	%rdx, %rax
>  #  ifdef USE_AS_WCSLEN
>  	shrq	$2, %rax
>  #  endif
>  	VZEROUPPER_RETURN
>  
> -	.p2align 4
>  L(max):
>  	movq	%r8, %rax
> +	VZEROUPPER_RETURN
> +
> +	.p2align 4
> +L(last_4x_vec):
> +	/* Test first 2x VEC normally.  */
> +	testl	%eax, %eax
> +	jnz	L(last_vec_x1)
> +
> +	VPCMPEQ	(VEC_SIZE + 1)(%rdi), %ymm0, %ymm1
> +	vpmovmskb	%ymm1, %eax
> +	testl	%eax, %eax
> +	jnz	L(last_vec_x2)
> +
> +	/* Normalize length.  */
> +	andl	$(VEC_SIZE * 4 - 1), %esi
> +	VPCMPEQ	(VEC_SIZE * 2 + 1)(%rdi), %ymm0, %ymm1
> +	vpmovmskb	%ymm1, %eax
> +	testl	%eax, %eax
> +	jnz	L(last_vec_x3)
> +
> +	subl	$(VEC_SIZE * 3), %esi
> +	jb	L(max)
> +
> +	VPCMPEQ	(VEC_SIZE * 3 + 1)(%rdi), %ymm0, %ymm1
> +	vpmovmskb	%ymm1, %eax
> +	tzcntl	%eax, %eax
> +	/* Check the end of data.  */
> +	cmpl	%eax, %esi
> +	jb	L(max)
> +	subq	%rdx, %rdi
> +	addl	$(VEC_SIZE * 3 + 1), %eax
> +	addq	%rdi, %rax
>  #  ifdef USE_AS_WCSLEN
>  	shrq	$2, %rax
>  #  endif
>  	VZEROUPPER_RETURN
>  
> -	.p2align 4
> -L(zero):
> -	xorl	%eax, %eax
> -	ret
> -# endif
>  
>  	.p2align 4
> -L(first_vec_x0):
> +L(last_vec_x1):
> +	/* essentially duplicates of first_vec_x1 but use 64 bit
> +	   instructions.  */
>  	tzcntl	%eax, %eax
> +	subq	%rdx, %rdi
> +	incl	%eax
>  	addq	%rdi, %rax
> -	subq	%rdx, %rax
> -# ifdef USE_AS_WCSLEN
> +#  ifdef USE_AS_WCSLEN
>  	shrq	$2, %rax
> -# endif
> +#  endif
>  	VZEROUPPER_RETURN
>  
>  	.p2align 4
> -L(first_vec_x1):
> +L(last_vec_x2):
> +	/* essentially duplicates of first_vec_x1 but use 64 bit
> +	   instructions.  */
>  	tzcntl	%eax, %eax
> -	addq	$VEC_SIZE, %rax
> +	subq	%rdx, %rdi
> +	addl	$(VEC_SIZE + 1), %eax
>  	addq	%rdi, %rax
> -	subq	%rdx, %rax
> -# ifdef USE_AS_WCSLEN
> +#  ifdef USE_AS_WCSLEN
>  	shrq	$2, %rax
> -# endif
> +#  endif
>  	VZEROUPPER_RETURN
>  
>  	.p2align 4
> -L(first_vec_x2):
> +L(last_vec_x3):
>  	tzcntl	%eax, %eax
> -	addq	$(VEC_SIZE * 2), %rax
> +	subl	$(VEC_SIZE * 2), %esi
> +	/* Check the end of data.  */
> +	cmpl	%eax, %esi
> +	jb	L(max_end)
> +	subq	%rdx, %rdi
> +	addl	$(VEC_SIZE * 2 + 1), %eax
>  	addq	%rdi, %rax
> -	subq	%rdx, %rax
> -# ifdef USE_AS_WCSLEN
> +#  ifdef USE_AS_WCSLEN
>  	shrq	$2, %rax
> -# endif
> +#  endif
> +	VZEROUPPER_RETURN
> +L(max_end):
> +	movq	%r8, %rax
>  	VZEROUPPER_RETURN
> +# endif
>  
> +	/* Cold case for crossing page with first load.	 */
>  	.p2align 4
> -L(4x_vec_end):
> -	VPCMPEQ	%ymm1, %ymm0, %ymm1
> -	vpmovmskb %ymm1, %eax
> -	testl	%eax, %eax
> -	jnz	L(first_vec_x0)
> -	VPCMPEQ %ymm2, %ymm0, %ymm2
> -	vpmovmskb %ymm2, %eax
> +L(cross_page_boundary):
> +	/* Align data to VEC_SIZE - 1.  */
> +	orq	$(VEC_SIZE - 1), %rdi
> +	VPCMPEQ	-(VEC_SIZE - 1)(%rdi), %ymm0, %ymm1
> +	vpmovmskb	%ymm1, %eax
> +	/* Remove the leading bytes. sarxl only uses bits [5:0] of COUNT
> +	   so no need to manually mod rdx.  */
> +	sarxl	%edx, %eax, %eax
> +# ifdef USE_AS_STRNLEN
>  	testl	%eax, %eax
> -	jnz	L(first_vec_x1)
> -	VPCMPEQ %ymm3, %ymm0, %ymm3
> -	vpmovmskb %ymm3, %eax
> +	jnz	L(cross_page_less_vec)
> +	leaq	1(%rdi), %rcx
> +	subq	%rdx, %rcx
> +	/* Check length.  */
> +	cmpq	%rsi, %rcx
> +	jb	L(cross_page_continue)
> +	movq	%r8, %rax
> +# else
>  	testl	%eax, %eax
> -	jnz	L(first_vec_x2)
> -	VPCMPEQ %ymm4, %ymm0, %ymm4
> -	vpmovmskb %ymm4, %eax
> -L(first_vec_x3):
> +	jz	L(cross_page_continue)
>  	tzcntl	%eax, %eax
> -	addq	$(VEC_SIZE * 3), %rax
> -	addq	%rdi, %rax
> -	subq	%rdx, %rax
> -# ifdef USE_AS_WCSLEN
> -	shrq	$2, %rax
> +#  ifdef USE_AS_WCSLEN
> +	shrl	$2, %eax
> +#  endif
>  # endif
> +L(return_vzeroupper):
> +	ZERO_UPPER_VEC_REGISTERS_RETURN
> +
> +# ifdef USE_AS_STRNLEN
> +	.p2align 4
> +L(cross_page_less_vec):
> +	tzcntl	%eax, %eax
> +	cmpq	%rax, %rsi
> +	cmovb	%esi, %eax
> +#  ifdef USE_AS_WCSLEN
> +	shrl	$2, %eax
> +#  endif
>  	VZEROUPPER_RETURN
> +# endif
>  
>  END (STRLEN)
>  #endif
> -- 
> 2.29.2
>
Noah Goldstein April 19, 2021, 11:39 p.m. UTC | #2
On Mon, Apr 19, 2021 at 6:16 PM H.J. Lu <hjl.tools@gmail.com> wrote:
>
> On Mon, Apr 19, 2021 at 02:43:45PM -0400, Noah Goldstein wrote:
> > No bug. This commit optimizes strlen-avx2.S. The optimizations are
> > mostly small things but they add up to roughly 10-30% performance
> > improvement for strlen. The results for strnlen are bit more
> > ambiguous. test-strlen, test-strnlen, test-wcslen, and test-wcsnlen
> > are all passing.
> >
> > Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com>
> > ---
> >  sysdeps/x86_64/multiarch/ifunc-impl-list.c |  16 +-
> >  sysdeps/x86_64/multiarch/strlen-avx2.S     | 535 +++++++++++++--------
> >  2 files changed, 337 insertions(+), 214 deletions(-)
> >
> > diff --git a/sysdeps/x86_64/multiarch/ifunc-impl-list.c b/sysdeps/x86_64/multiarch/ifunc-impl-list.c
> > index 0b0927b124..4613bead7c 100644
> > --- a/sysdeps/x86_64/multiarch/ifunc-impl-list.c
> > +++ b/sysdeps/x86_64/multiarch/ifunc-impl-list.c
> > @@ -285,10 +285,12 @@ __libc_ifunc_impl_list (const char *name, struct libc_ifunc_impl *array,
> >    /* Support sysdeps/x86_64/multiarch/strlen.c.  */
> >    IFUNC_IMPL (i, name, strlen,
> >             IFUNC_IMPL_ADD (array, i, strlen,
> > -                           CPU_FEATURE_USABLE (AVX2),
> > +                           (CPU_FEATURE_USABLE (AVX2)
> > +                            && CPU_FEATURE_USABLE (BMI2)),
> >                             __strlen_avx2)
> >             IFUNC_IMPL_ADD (array, i, strlen,
> >                             (CPU_FEATURE_USABLE (AVX2)
> > +                            && CPU_FEATURE_USABLE (BMI2)
> >                              && CPU_FEATURE_USABLE (RTM)),
> >                             __strlen_avx2_rtm)
> >             IFUNC_IMPL_ADD (array, i, strlen,
> > @@ -301,10 +303,12 @@ __libc_ifunc_impl_list (const char *name, struct libc_ifunc_impl *array,
> >    /* Support sysdeps/x86_64/multiarch/strnlen.c.  */
> >    IFUNC_IMPL (i, name, strnlen,
> >             IFUNC_IMPL_ADD (array, i, strnlen,
> > -                           CPU_FEATURE_USABLE (AVX2),
> > +                           (CPU_FEATURE_USABLE (AVX2)
> > +                            && CPU_FEATURE_USABLE (BMI2)),
> >                             __strnlen_avx2)
> >             IFUNC_IMPL_ADD (array, i, strnlen,
> >                             (CPU_FEATURE_USABLE (AVX2)
> > +                            && CPU_FEATURE_USABLE (BMI2)
> >                              && CPU_FEATURE_USABLE (RTM)),
> >                             __strnlen_avx2_rtm)
> >             IFUNC_IMPL_ADD (array, i, strnlen,
> > @@ -646,10 +650,12 @@ __libc_ifunc_impl_list (const char *name, struct libc_ifunc_impl *array,
> >    /* Support sysdeps/x86_64/multiarch/wcslen.c.  */
> >    IFUNC_IMPL (i, name, wcslen,
> >             IFUNC_IMPL_ADD (array, i, wcslen,
> > -                           CPU_FEATURE_USABLE (AVX2),
> > +                           (CPU_FEATURE_USABLE (AVX2)
> > +                            && CPU_FEATURE_USABLE (BMI2)),
> >                             __wcslen_avx2)
> >             IFUNC_IMPL_ADD (array, i, wcslen,
> >                             (CPU_FEATURE_USABLE (AVX2)
> > +                            && CPU_FEATURE_USABLE (BMI2)
> >                              && CPU_FEATURE_USABLE (RTM)),
> >                             __wcslen_avx2_rtm)
> >             IFUNC_IMPL_ADD (array, i, wcslen,
> > @@ -662,10 +668,12 @@ __libc_ifunc_impl_list (const char *name, struct libc_ifunc_impl *array,
> >    /* Support sysdeps/x86_64/multiarch/wcsnlen.c.  */
> >    IFUNC_IMPL (i, name, wcsnlen,
> >             IFUNC_IMPL_ADD (array, i, wcsnlen,
> > -                           CPU_FEATURE_USABLE (AVX2),
> > +                           (CPU_FEATURE_USABLE (AVX2)
> > +                            && CPU_FEATURE_USABLE (BMI2)),
> >                             __wcsnlen_avx2)
> >             IFUNC_IMPL_ADD (array, i, wcsnlen,
> >                             (CPU_FEATURE_USABLE (AVX2)
> > +                            && CPU_FEATURE_USABLE (BMI2)
> >                              && CPU_FEATURE_USABLE (RTM)),
> >                             __wcsnlen_avx2_rtm)
> >             IFUNC_IMPL_ADD (array, i, wcsnlen,
> > diff --git a/sysdeps/x86_64/multiarch/strlen-avx2.S b/sysdeps/x86_64/multiarch/strlen-avx2.S
> > index 1caae9e6bc..eb92f587b4 100644
> > --- a/sysdeps/x86_64/multiarch/strlen-avx2.S
> > +++ b/sysdeps/x86_64/multiarch/strlen-avx2.S
> > @@ -27,9 +27,11 @@
> >  # ifdef USE_AS_WCSLEN
> >  #  define VPCMPEQ    vpcmpeqd
> >  #  define VPMINU     vpminud
> > +#  define CHAR_SIZE  4
> >  # else
> >  #  define VPCMPEQ    vpcmpeqb
> >  #  define VPMINU     vpminub
> > +#  define CHAR_SIZE  1
> >  # endif
> >
> >  # ifndef VZEROUPPER
> > @@ -41,349 +43,462 @@
> >  # endif
> >
> >  # define VEC_SIZE 32
> > +# define PAGE_SIZE 4096
> > +# define LOG_PAGE_SIZE 12
> >
> >       .section SECTION(.text),"ax",@progbits
> >  ENTRY (STRLEN)
> >  # ifdef USE_AS_STRNLEN
> > -     /* Check for zero length.  */
> > +     /* Check zero length.  */
> >       test    %RSI_LP, %RSI_LP
> >       jz      L(zero)
> > +     /* Store max len in R8_LP before adjusting if using WCSLEN.  */
> > +     mov     %RSI_LP, %R8_LP
> >  #  ifdef USE_AS_WCSLEN
> >       shl     $2, %RSI_LP
> >  #  elif defined __ILP32__
> >       /* Clear the upper 32 bits.  */
> >       movl    %esi, %esi
> >  #  endif
> > -     mov     %RSI_LP, %R8_LP
> >  # endif
> > -     movl    %edi, %ecx
> > +     movl    %edi, %eax
> >       movq    %rdi, %rdx
> >       vpxor   %xmm0, %xmm0, %xmm0
> > -
> > +     /* Shift left eax to clear all bits not relevant to page cross
> > +        check. This saves 2 bytes of code as opposed to using andl with
> > +        PAGE_SIZE - 1. Then compare with PAGE_SIZE - VEC_SIZE shifted
> > +        left by the same amount (an imm32 either way).  */
> > +     sall    $(32 - LOG_PAGE_SIZE), %eax
>
> I prefer AND over SAL for better throughput.

Done.

>
> H.J.
> >       /* Check if we may cross page boundary with one vector load.  */
> > -     andl    $(2 * VEC_SIZE - 1), %ecx
> > -     cmpl    $VEC_SIZE, %ecx
> > -     ja      L(cros_page_boundary)
> > +     cmpl    $((PAGE_SIZE - VEC_SIZE) << (32 - LOG_PAGE_SIZE)), %eax
> > +     ja      L(cross_page_boundary)
> >
> >       /* Check the first VEC_SIZE bytes.  */
> > -     VPCMPEQ (%rdi), %ymm0, %ymm1
> > -     vpmovmskb %ymm1, %eax
> > -     testl   %eax, %eax
> > -
> > +     VPCMPEQ (%rdi), %ymm0, %ymm1
> > +     vpmovmskb       %ymm1, %eax
> >  # ifdef USE_AS_STRNLEN
> > -     jnz     L(first_vec_x0_check)
> > -     /* Adjust length and check the end of data.  */
> > -     subq    $VEC_SIZE, %rsi
> > -     jbe     L(max)
> > -# else
> > -     jnz     L(first_vec_x0)
> > +     /* If length < VEC_SIZE handle special.  */
> > +     cmpq    $VEC_SIZE, %rsi
> > +     jbe     L(first_vec_x0)
> >  # endif
> > -
> > -     /* Align data for aligned loads in the loop.  */
> > -     addq    $VEC_SIZE, %rdi
> > -     andl    $(VEC_SIZE - 1), %ecx
> > -     andq    $-VEC_SIZE, %rdi
> > +     /* If empty continue to aligned_more. Otherwise return bit
> > +        position of first match.  */
> > +     testl   %eax, %eax
> > +     jz      L(aligned_more)
> > +     tzcntl  %eax, %eax
> > +# ifdef USE_AS_WCSLEN
> > +     shrl    $2, %eax
> > +# endif
> > +     VZEROUPPER_RETURN
> >
> >  # ifdef USE_AS_STRNLEN
> > -     /* Adjust length.  */
> > -     addq    %rcx, %rsi
> > +L(zero):
> > +     xorl    %eax, %eax
> > +     ret
> >
> > -     subq    $(VEC_SIZE * 4), %rsi
> > -     jbe     L(last_4x_vec_or_less)
> > +     .p2align 4
> > +L(first_vec_x0):
> > +     /* Set bit for max len so that tzcnt will return min of max len
> > +        and position of first match.  */
> > +     btsq    %rsi, %rax
> > +     tzcntl  %eax, %eax
> > +#  ifdef USE_AS_WCSLEN
> > +     shrl    $2, %eax
> > +#  endif
> > +     VZEROUPPER_RETURN
> >  # endif
> > -     jmp     L(more_4x_vec)
> >
> >       .p2align 4
> > -L(cros_page_boundary):
> > -     andl    $(VEC_SIZE - 1), %ecx
> > -     andq    $-VEC_SIZE, %rdi
> > -     VPCMPEQ (%rdi), %ymm0, %ymm1
> > -     vpmovmskb %ymm1, %eax
> > -     /* Remove the leading bytes.  */
> > -     sarl    %cl, %eax
> > -     testl   %eax, %eax
> > -     jz      L(aligned_more)
> > +L(first_vec_x1):
> >       tzcntl  %eax, %eax
> > +     /* Safe to use 32 bit instructions as these are only called for
> > +        size = [1, 159].  */
> >  # ifdef USE_AS_STRNLEN
> > -     /* Check the end of data.  */
> > -     cmpq    %rax, %rsi
> > -     jbe     L(max)
> > +     /* Use ecx which was computed earlier to compute correct value.
> > +      */
> > +     subl    $(VEC_SIZE * 4 + 1), %ecx
> > +     addl    %ecx, %eax
> > +# else
> > +     subl    %edx, %edi
> > +     incl    %edi
> > +     addl    %edi, %eax
> >  # endif
> > -     addq    %rdi, %rax
> > -     addq    %rcx, %rax
> > -     subq    %rdx, %rax
> >  # ifdef USE_AS_WCSLEN
> > -     shrq    $2, %rax
> > +     shrl    $2, %eax
> >  # endif
> > -L(return_vzeroupper):
> > -     ZERO_UPPER_VEC_REGISTERS_RETURN
> > +     VZEROUPPER_RETURN
> >
> >       .p2align 4
> > -L(aligned_more):
> > +L(first_vec_x2):
> > +     tzcntl  %eax, %eax
> > +     /* Safe to use 32 bit instructions as these are only called for
> > +        size = [1, 159].  */
> >  # ifdef USE_AS_STRNLEN
> > -        /* "rcx" is less than VEC_SIZE.  Calculate "rdx + rcx - VEC_SIZE"
> > -         with "rdx - (VEC_SIZE - rcx)" instead of "(rdx + rcx) - VEC_SIZE"
> > -         to void possible addition overflow.  */
> > -     negq    %rcx
> > -     addq    $VEC_SIZE, %rcx
> > -
> > -     /* Check the end of data.  */
> > -     subq    %rcx, %rsi
> > -     jbe     L(max)
> > +     /* Use ecx which was computed earlier to compute correct value.
> > +      */
> > +     subl    $(VEC_SIZE * 3 + 1), %ecx
> > +     addl    %ecx, %eax
> > +# else
> > +     subl    %edx, %edi
> > +     addl    $(VEC_SIZE + 1), %edi
> > +     addl    %edi, %eax
> >  # endif
> > +# ifdef USE_AS_WCSLEN
> > +     shrl    $2, %eax
> > +# endif
> > +     VZEROUPPER_RETURN
> >
> > -     addq    $VEC_SIZE, %rdi
> > +     .p2align 4
> > +L(first_vec_x3):
> > +     tzcntl  %eax, %eax
> > +     /* Safe to use 32 bit instructions as these are only called for
> > +        size = [1, 159].  */
> > +# ifdef USE_AS_STRNLEN
> > +     /* Use ecx which was computed earlier to compute correct value.
> > +      */
> > +     subl    $(VEC_SIZE * 2 + 1), %ecx
> > +     addl    %ecx, %eax
> > +# else
> > +     subl    %edx, %edi
> > +     addl    $(VEC_SIZE * 2 + 1), %edi
> > +     addl    %edi, %eax
> > +# endif
> > +# ifdef USE_AS_WCSLEN
> > +     shrl    $2, %eax
> > +# endif
> > +     VZEROUPPER_RETURN
> >
> > +     .p2align 4
> > +L(first_vec_x4):
> > +     tzcntl  %eax, %eax
> > +     /* Safe to use 32 bit instructions as these are only called for
> > +        size = [1, 159].  */
> >  # ifdef USE_AS_STRNLEN
> > -     subq    $(VEC_SIZE * 4), %rsi
> > -     jbe     L(last_4x_vec_or_less)
> > +     /* Use ecx which was computed earlier to compute correct value.
> > +      */
> > +     subl    $(VEC_SIZE + 1), %ecx
> > +     addl    %ecx, %eax
> > +# else
> > +     subl    %edx, %edi
> > +     addl    $(VEC_SIZE * 3 + 1), %edi
> > +     addl    %edi, %eax
> >  # endif
> > +# ifdef USE_AS_WCSLEN
> > +     shrl    $2, %eax
> > +# endif
> > +     VZEROUPPER_RETURN
> >
> > -L(more_4x_vec):
> > +     .p2align 5
> > +L(aligned_more):
> > +     /* Align data to VEC_SIZE - 1. This is the same number of
> > +        instructions as using andq with -VEC_SIZE but saves 4 bytes of
> > +        code on the x4 check.  */
> > +     orq     $(VEC_SIZE - 1), %rdi
> > +L(cross_page_continue):
> >       /* Check the first 4 * VEC_SIZE.  Only one VEC_SIZE at a time
> >          since data is only aligned to VEC_SIZE.  */
> > -     VPCMPEQ (%rdi), %ymm0, %ymm1
> > -     vpmovmskb %ymm1, %eax
> > -     testl   %eax, %eax
> > -     jnz     L(first_vec_x0)
> > -
> > -     VPCMPEQ VEC_SIZE(%rdi), %ymm0, %ymm1
> > -     vpmovmskb %ymm1, %eax
> > +# ifdef USE_AS_STRNLEN
> > +     /* + 1 because rdi is aligned to VEC_SIZE - 1. + CHAR_SIZE because
> > +        it simplies the logic in last_4x_vec_or_less.  */
> > +     leaq    (VEC_SIZE * 4 + CHAR_SIZE + 1)(%rdi), %rcx
> > +     subq    %rdx, %rcx
> > +# endif
> > +     /* Load first VEC regardless.  */
> > +     VPCMPEQ 1(%rdi), %ymm0, %ymm1
> > +# ifdef USE_AS_STRNLEN
> > +     /* Adjust length. If near end handle specially.  */
> > +     subq    %rcx, %rsi
> > +     jb      L(last_4x_vec_or_less)
> > +# endif
> > +     vpmovmskb       %ymm1, %eax
> >       testl   %eax, %eax
> >       jnz     L(first_vec_x1)
> >
> > -     VPCMPEQ (VEC_SIZE * 2)(%rdi), %ymm0, %ymm1
> > -     vpmovmskb %ymm1, %eax
> > +     VPCMPEQ (VEC_SIZE + 1)(%rdi), %ymm0, %ymm1
> > +     vpmovmskb       %ymm1, %eax
> >       testl   %eax, %eax
> >       jnz     L(first_vec_x2)
> >
> > -     VPCMPEQ (VEC_SIZE * 3)(%rdi), %ymm0, %ymm1
> > -     vpmovmskb %ymm1, %eax
> > +     VPCMPEQ (VEC_SIZE * 2 + 1)(%rdi), %ymm0, %ymm1
> > +     vpmovmskb       %ymm1, %eax
> >       testl   %eax, %eax
> >       jnz     L(first_vec_x3)
> >
> > -     addq    $(VEC_SIZE * 4), %rdi
> > -
> > -# ifdef USE_AS_STRNLEN
> > -     subq    $(VEC_SIZE * 4), %rsi
> > -     jbe     L(last_4x_vec_or_less)
> > -# endif
> > -
> > -     /* Align data to 4 * VEC_SIZE.  */
> > -     movq    %rdi, %rcx
> > -     andl    $(4 * VEC_SIZE - 1), %ecx
> > -     andq    $-(4 * VEC_SIZE), %rdi
> > +     VPCMPEQ (VEC_SIZE * 3 + 1)(%rdi), %ymm0, %ymm1
> > +     vpmovmskb       %ymm1, %eax
> > +     testl   %eax, %eax
> > +     jnz     L(first_vec_x4)
> >
> > +     /* Align data to VEC_SIZE * 4 - 1.  */
> >  # ifdef USE_AS_STRNLEN
> > -     /* Adjust length.  */
> > +     /* Before adjusting length check if at last VEC_SIZE * 4.  */
> > +     cmpq    $(VEC_SIZE * 4 - 1), %rsi
> > +     jbe     L(last_4x_vec_or_less_load)
> > +     incq    %rdi
> > +     movl    %edi, %ecx
> > +     orq     $(VEC_SIZE * 4 - 1), %rdi
> > +     andl    $(VEC_SIZE * 4 - 1), %ecx
> > +     /* Readjust length.  */
> >       addq    %rcx, %rsi
> > +# else
> > +     incq    %rdi
> > +     orq     $(VEC_SIZE * 4 - 1), %rdi
> >  # endif
> > -
> > +     /* Compare 4 * VEC at a time forward.  */
> >       .p2align 4
> >  L(loop_4x_vec):
> > -     /* Compare 4 * VEC at a time forward.  */
> > -     vmovdqa (%rdi), %ymm1
> > -     vmovdqa VEC_SIZE(%rdi), %ymm2
> > -     vmovdqa (VEC_SIZE * 2)(%rdi), %ymm3
> > -     vmovdqa (VEC_SIZE * 3)(%rdi), %ymm4
> > -     VPMINU  %ymm1, %ymm2, %ymm5
> > -     VPMINU  %ymm3, %ymm4, %ymm6
> > -     VPMINU  %ymm5, %ymm6, %ymm5
> > -
> > -     VPCMPEQ %ymm5, %ymm0, %ymm5
> > -     vpmovmskb %ymm5, %eax
> > -     testl   %eax, %eax
> > -     jnz     L(4x_vec_end)
> > -
> > -     addq    $(VEC_SIZE * 4), %rdi
> > -
> > -# ifndef USE_AS_STRNLEN
> > -     jmp     L(loop_4x_vec)
> > -# else
> > +# ifdef USE_AS_STRNLEN
> > +     /* Break if at end of length.  */
> >       subq    $(VEC_SIZE * 4), %rsi
> > -     ja      L(loop_4x_vec)
> > -
> > -L(last_4x_vec_or_less):
> > -     /* Less than 4 * VEC and aligned to VEC_SIZE.  */
> > -     addl    $(VEC_SIZE * 2), %esi
> > -     jle     L(last_2x_vec)
> > +     jb      L(last_4x_vec_or_less_cmpeq)
> > +# endif
> > +     /* Save some code size by microfusing VPMINU with the load. Since
> > +        the matches in ymm2/ymm4 can only be returned if there where no
> > +        matches in ymm1/ymm3 respectively there is no issue with overlap.
> > +      */
> > +     vmovdqa 1(%rdi), %ymm1
> > +     VPMINU  (VEC_SIZE + 1)(%rdi), %ymm1, %ymm2
> > +     vmovdqa (VEC_SIZE * 2 + 1)(%rdi), %ymm3
> > +     VPMINU  (VEC_SIZE * 3 + 1)(%rdi), %ymm3, %ymm4
> > +
> > +     VPMINU  %ymm2, %ymm4, %ymm5
> > +     VPCMPEQ %ymm5, %ymm0, %ymm5
> > +     vpmovmskb       %ymm5, %ecx
> >
> > -     VPCMPEQ (%rdi), %ymm0, %ymm1
> > -     vpmovmskb %ymm1, %eax
> > -     testl   %eax, %eax
> > -     jnz     L(first_vec_x0)
> > +     subq    $-(VEC_SIZE * 4), %rdi
> > +     testl   %ecx, %ecx
> > +     jz      L(loop_4x_vec)
> >
> > -     VPCMPEQ VEC_SIZE(%rdi), %ymm0, %ymm1
> > -     vpmovmskb %ymm1, %eax
> > -     testl   %eax, %eax
> > -     jnz     L(first_vec_x1)
> >
> > -     VPCMPEQ (VEC_SIZE * 2)(%rdi), %ymm0, %ymm1
> > -     vpmovmskb %ymm1, %eax
> > +     VPCMPEQ %ymm1, %ymm0, %ymm1
> > +     vpmovmskb       %ymm1, %eax
> > +     subq    %rdx, %rdi
> >       testl   %eax, %eax
> > +     jnz     L(last_vec_return_x0)
> >
> > -     jnz     L(first_vec_x2_check)
> > -     subl    $VEC_SIZE, %esi
> > -     jle     L(max)
> > -
> > -     VPCMPEQ (VEC_SIZE * 3)(%rdi), %ymm0, %ymm1
> > -     vpmovmskb %ymm1, %eax
> > +     VPCMPEQ %ymm2, %ymm0, %ymm2
> > +     vpmovmskb       %ymm2, %eax
> >       testl   %eax, %eax
> > -
> > -     jnz     L(first_vec_x3_check)
> > -     movq    %r8, %rax
> > -#  ifdef USE_AS_WCSLEN
> > +     jnz     L(last_vec_return_x1)
> > +
> > +     /* Combine last 2 VEC.  */
> > +     VPCMPEQ %ymm3, %ymm0, %ymm3
> > +     vpmovmskb       %ymm3, %eax
> > +     /* rcx has combined result from all 4 VEC. It will only be used if
> > +        the first 3 other VEC all did not contain a match.  */
> > +     salq    $32, %rcx
> > +     orq     %rcx, %rax
> > +     tzcntq  %rax, %rax
> > +     subq    $(VEC_SIZE * 2 - 1), %rdi
> > +     addq    %rdi, %rax
> > +# ifdef USE_AS_WCSLEN
> >       shrq    $2, %rax
> > -#  endif
> > +# endif
> >       VZEROUPPER_RETURN
> >
> > +
> > +# ifdef USE_AS_STRNLEN
> >       .p2align 4
> > -L(last_2x_vec):
> > -     addl    $(VEC_SIZE * 2), %esi
> > -     VPCMPEQ (%rdi), %ymm0, %ymm1
> > -     vpmovmskb %ymm1, %eax
> > -     testl   %eax, %eax
> > +L(last_4x_vec_or_less_load):
> > +     /* Depending on entry adjust rdi / prepare first VEC in ymm1.  */
> > +     subq    $-(VEC_SIZE * 4), %rdi
> > +L(last_4x_vec_or_less_cmpeq):
> > +     VPCMPEQ 1(%rdi), %ymm0, %ymm1
> > +L(last_4x_vec_or_less):
> >
> > -     jnz     L(first_vec_x0_check)
> > -     subl    $VEC_SIZE, %esi
> > -     jle     L(max)
> > +     vpmovmskb       %ymm1, %eax
> > +     /* If remaining length > VEC_SIZE * 2. This works if esi is off by
> > +        VEC_SIZE * 4.  */
> > +     testl   $(VEC_SIZE * 2), %esi
> > +     jnz     L(last_4x_vec)
> >
> > -     VPCMPEQ VEC_SIZE(%rdi), %ymm0, %ymm1
> > -     vpmovmskb %ymm1, %eax
> > +     /* length may have been negative or positive by an offset of
> > +        VEC_SIZE * 4 depending on where this was called from. This fixes
> > +        that.  */
> > +     andl    $(VEC_SIZE * 4 - 1), %esi
> >       testl   %eax, %eax
> > -     jnz     L(first_vec_x1_check)
> > -     movq    %r8, %rax
> > -#  ifdef USE_AS_WCSLEN
> > -     shrq    $2, %rax
> > -#  endif
> > -     VZEROUPPER_RETURN
> > +     jnz     L(last_vec_x1_check)
> >
> > -     .p2align 4
> > -L(first_vec_x0_check):
> > +     subl    $VEC_SIZE, %esi
> > +     jb      L(max)
> > +
> > +     VPCMPEQ (VEC_SIZE + 1)(%rdi), %ymm0, %ymm1
> > +     vpmovmskb       %ymm1, %eax
> >       tzcntl  %eax, %eax
> >       /* Check the end of data.  */
> > -     cmpq    %rax, %rsi
> > -     jbe     L(max)
> > +     cmpl    %eax, %esi
> > +     jb      L(max)
> > +     subq    %rdx, %rdi
> > +     addl    $(VEC_SIZE + 1), %eax
> >       addq    %rdi, %rax
> > -     subq    %rdx, %rax
> >  #  ifdef USE_AS_WCSLEN
> >       shrq    $2, %rax
> >  #  endif
> >       VZEROUPPER_RETURN
> > +# endif
> >
> >       .p2align 4
> > -L(first_vec_x1_check):
> > +L(last_vec_return_x0):
> >       tzcntl  %eax, %eax
> > -     /* Check the end of data.  */
> > -     cmpq    %rax, %rsi
> > -     jbe     L(max)
> > -     addq    $VEC_SIZE, %rax
> > +     subq    $(VEC_SIZE * 4 - 1), %rdi
> >       addq    %rdi, %rax
> > -     subq    %rdx, %rax
> > -#  ifdef USE_AS_WCSLEN
> > +# ifdef USE_AS_WCSLEN
> >       shrq    $2, %rax
> > -#  endif
> > +# endif
> >       VZEROUPPER_RETURN
> >
> >       .p2align 4
> > -L(first_vec_x2_check):
> > +L(last_vec_return_x1):
> >       tzcntl  %eax, %eax
> > -     /* Check the end of data.  */
> > -     cmpq    %rax, %rsi
> > -     jbe     L(max)
> > -     addq    $(VEC_SIZE * 2), %rax
> > +     subq    $(VEC_SIZE * 3 - 1), %rdi
> >       addq    %rdi, %rax
> > -     subq    %rdx, %rax
> > -#  ifdef USE_AS_WCSLEN
> > +# ifdef USE_AS_WCSLEN
> >       shrq    $2, %rax
> > -#  endif
> > +# endif
> >       VZEROUPPER_RETURN
> >
> > +# ifdef USE_AS_STRNLEN
> >       .p2align 4
> > -L(first_vec_x3_check):
> > +L(last_vec_x1_check):
> > +
> >       tzcntl  %eax, %eax
> >       /* Check the end of data.  */
> > -     cmpq    %rax, %rsi
> > -     jbe     L(max)
> > -     addq    $(VEC_SIZE * 3), %rax
> > +     cmpl    %eax, %esi
> > +     jb      L(max)
> > +     subq    %rdx, %rdi
> > +     incl    %eax
> >       addq    %rdi, %rax
> > -     subq    %rdx, %rax
> >  #  ifdef USE_AS_WCSLEN
> >       shrq    $2, %rax
> >  #  endif
> >       VZEROUPPER_RETURN
> >
> > -     .p2align 4
> >  L(max):
> >       movq    %r8, %rax
> > +     VZEROUPPER_RETURN
> > +
> > +     .p2align 4
> > +L(last_4x_vec):
> > +     /* Test first 2x VEC normally.  */
> > +     testl   %eax, %eax
> > +     jnz     L(last_vec_x1)
> > +
> > +     VPCMPEQ (VEC_SIZE + 1)(%rdi), %ymm0, %ymm1
> > +     vpmovmskb       %ymm1, %eax
> > +     testl   %eax, %eax
> > +     jnz     L(last_vec_x2)
> > +
> > +     /* Normalize length.  */
> > +     andl    $(VEC_SIZE * 4 - 1), %esi
> > +     VPCMPEQ (VEC_SIZE * 2 + 1)(%rdi), %ymm0, %ymm1
> > +     vpmovmskb       %ymm1, %eax
> > +     testl   %eax, %eax
> > +     jnz     L(last_vec_x3)
> > +
> > +     subl    $(VEC_SIZE * 3), %esi
> > +     jb      L(max)
> > +
> > +     VPCMPEQ (VEC_SIZE * 3 + 1)(%rdi), %ymm0, %ymm1
> > +     vpmovmskb       %ymm1, %eax
> > +     tzcntl  %eax, %eax
> > +     /* Check the end of data.  */
> > +     cmpl    %eax, %esi
> > +     jb      L(max)
> > +     subq    %rdx, %rdi
> > +     addl    $(VEC_SIZE * 3 + 1), %eax
> > +     addq    %rdi, %rax
> >  #  ifdef USE_AS_WCSLEN
> >       shrq    $2, %rax
> >  #  endif
> >       VZEROUPPER_RETURN
> >
> > -     .p2align 4
> > -L(zero):
> > -     xorl    %eax, %eax
> > -     ret
> > -# endif
> >
> >       .p2align 4
> > -L(first_vec_x0):
> > +L(last_vec_x1):
> > +     /* essentially duplicates of first_vec_x1 but use 64 bit
> > +        instructions.  */
> >       tzcntl  %eax, %eax
> > +     subq    %rdx, %rdi
> > +     incl    %eax
> >       addq    %rdi, %rax
> > -     subq    %rdx, %rax
> > -# ifdef USE_AS_WCSLEN
> > +#  ifdef USE_AS_WCSLEN
> >       shrq    $2, %rax
> > -# endif
> > +#  endif
> >       VZEROUPPER_RETURN
> >
> >       .p2align 4
> > -L(first_vec_x1):
> > +L(last_vec_x2):
> > +     /* essentially duplicates of first_vec_x1 but use 64 bit
> > +        instructions.  */
> >       tzcntl  %eax, %eax
> > -     addq    $VEC_SIZE, %rax
> > +     subq    %rdx, %rdi
> > +     addl    $(VEC_SIZE + 1), %eax
> >       addq    %rdi, %rax
> > -     subq    %rdx, %rax
> > -# ifdef USE_AS_WCSLEN
> > +#  ifdef USE_AS_WCSLEN
> >       shrq    $2, %rax
> > -# endif
> > +#  endif
> >       VZEROUPPER_RETURN
> >
> >       .p2align 4
> > -L(first_vec_x2):
> > +L(last_vec_x3):
> >       tzcntl  %eax, %eax
> > -     addq    $(VEC_SIZE * 2), %rax
> > +     subl    $(VEC_SIZE * 2), %esi
> > +     /* Check the end of data.  */
> > +     cmpl    %eax, %esi
> > +     jb      L(max_end)
> > +     subq    %rdx, %rdi
> > +     addl    $(VEC_SIZE * 2 + 1), %eax
> >       addq    %rdi, %rax
> > -     subq    %rdx, %rax
> > -# ifdef USE_AS_WCSLEN
> > +#  ifdef USE_AS_WCSLEN
> >       shrq    $2, %rax
> > -# endif
> > +#  endif
> > +     VZEROUPPER_RETURN
> > +L(max_end):
> > +     movq    %r8, %rax
> >       VZEROUPPER_RETURN
> > +# endif
> >
> > +     /* Cold case for crossing page with first load.  */
> >       .p2align 4
> > -L(4x_vec_end):
> > -     VPCMPEQ %ymm1, %ymm0, %ymm1
> > -     vpmovmskb %ymm1, %eax
> > -     testl   %eax, %eax
> > -     jnz     L(first_vec_x0)
> > -     VPCMPEQ %ymm2, %ymm0, %ymm2
> > -     vpmovmskb %ymm2, %eax
> > +L(cross_page_boundary):
> > +     /* Align data to VEC_SIZE - 1.  */
> > +     orq     $(VEC_SIZE - 1), %rdi
> > +     VPCMPEQ -(VEC_SIZE - 1)(%rdi), %ymm0, %ymm1
> > +     vpmovmskb       %ymm1, %eax
> > +     /* Remove the leading bytes. sarxl only uses bits [5:0] of COUNT
> > +        so no need to manually mod rdx.  */
> > +     sarxl   %edx, %eax, %eax
> > +# ifdef USE_AS_STRNLEN
> >       testl   %eax, %eax
> > -     jnz     L(first_vec_x1)
> > -     VPCMPEQ %ymm3, %ymm0, %ymm3
> > -     vpmovmskb %ymm3, %eax
> > +     jnz     L(cross_page_less_vec)
> > +     leaq    1(%rdi), %rcx
> > +     subq    %rdx, %rcx
> > +     /* Check length.  */
> > +     cmpq    %rsi, %rcx
> > +     jb      L(cross_page_continue)
> > +     movq    %r8, %rax
> > +# else
> >       testl   %eax, %eax
> > -     jnz     L(first_vec_x2)
> > -     VPCMPEQ %ymm4, %ymm0, %ymm4
> > -     vpmovmskb %ymm4, %eax
> > -L(first_vec_x3):
> > +     jz      L(cross_page_continue)
> >       tzcntl  %eax, %eax
> > -     addq    $(VEC_SIZE * 3), %rax
> > -     addq    %rdi, %rax
> > -     subq    %rdx, %rax
> > -# ifdef USE_AS_WCSLEN
> > -     shrq    $2, %rax
> > +#  ifdef USE_AS_WCSLEN
> > +     shrl    $2, %eax
> > +#  endif
> >  # endif
> > +L(return_vzeroupper):
> > +     ZERO_UPPER_VEC_REGISTERS_RETURN
> > +
> > +# ifdef USE_AS_STRNLEN
> > +     .p2align 4
> > +L(cross_page_less_vec):
> > +     tzcntl  %eax, %eax
> > +     cmpq    %rax, %rsi
> > +     cmovb   %esi, %eax
> > +#  ifdef USE_AS_WCSLEN
> > +     shrl    $2, %eax
> > +#  endif
> >       VZEROUPPER_RETURN
> > +# endif
> >
> >  END (STRLEN)
> >  #endif
> > --
> > 2.29.2
> >
diff mbox series

Patch

diff --git a/sysdeps/x86_64/multiarch/ifunc-impl-list.c b/sysdeps/x86_64/multiarch/ifunc-impl-list.c
index 0b0927b124..4613bead7c 100644
--- a/sysdeps/x86_64/multiarch/ifunc-impl-list.c
+++ b/sysdeps/x86_64/multiarch/ifunc-impl-list.c
@@ -285,10 +285,12 @@  __libc_ifunc_impl_list (const char *name, struct libc_ifunc_impl *array,
   /* Support sysdeps/x86_64/multiarch/strlen.c.  */
   IFUNC_IMPL (i, name, strlen,
 	      IFUNC_IMPL_ADD (array, i, strlen,
-			      CPU_FEATURE_USABLE (AVX2),
+			      (CPU_FEATURE_USABLE (AVX2)
+			       && CPU_FEATURE_USABLE (BMI2)),
 			      __strlen_avx2)
 	      IFUNC_IMPL_ADD (array, i, strlen,
 			      (CPU_FEATURE_USABLE (AVX2)
+			       && CPU_FEATURE_USABLE (BMI2)
 			       && CPU_FEATURE_USABLE (RTM)),
 			      __strlen_avx2_rtm)
 	      IFUNC_IMPL_ADD (array, i, strlen,
@@ -301,10 +303,12 @@  __libc_ifunc_impl_list (const char *name, struct libc_ifunc_impl *array,
   /* Support sysdeps/x86_64/multiarch/strnlen.c.  */
   IFUNC_IMPL (i, name, strnlen,
 	      IFUNC_IMPL_ADD (array, i, strnlen,
-			      CPU_FEATURE_USABLE (AVX2),
+			      (CPU_FEATURE_USABLE (AVX2)
+			       && CPU_FEATURE_USABLE (BMI2)),
 			      __strnlen_avx2)
 	      IFUNC_IMPL_ADD (array, i, strnlen,
 			      (CPU_FEATURE_USABLE (AVX2)
+			       && CPU_FEATURE_USABLE (BMI2)
 			       && CPU_FEATURE_USABLE (RTM)),
 			      __strnlen_avx2_rtm)
 	      IFUNC_IMPL_ADD (array, i, strnlen,
@@ -646,10 +650,12 @@  __libc_ifunc_impl_list (const char *name, struct libc_ifunc_impl *array,
   /* Support sysdeps/x86_64/multiarch/wcslen.c.  */
   IFUNC_IMPL (i, name, wcslen,
 	      IFUNC_IMPL_ADD (array, i, wcslen,
-			      CPU_FEATURE_USABLE (AVX2),
+			      (CPU_FEATURE_USABLE (AVX2)
+			       && CPU_FEATURE_USABLE (BMI2)),
 			      __wcslen_avx2)
 	      IFUNC_IMPL_ADD (array, i, wcslen,
 			      (CPU_FEATURE_USABLE (AVX2)
+			       && CPU_FEATURE_USABLE (BMI2)
 			       && CPU_FEATURE_USABLE (RTM)),
 			      __wcslen_avx2_rtm)
 	      IFUNC_IMPL_ADD (array, i, wcslen,
@@ -662,10 +668,12 @@  __libc_ifunc_impl_list (const char *name, struct libc_ifunc_impl *array,
   /* Support sysdeps/x86_64/multiarch/wcsnlen.c.  */
   IFUNC_IMPL (i, name, wcsnlen,
 	      IFUNC_IMPL_ADD (array, i, wcsnlen,
-			      CPU_FEATURE_USABLE (AVX2),
+			      (CPU_FEATURE_USABLE (AVX2)
+			       && CPU_FEATURE_USABLE (BMI2)),
 			      __wcsnlen_avx2)
 	      IFUNC_IMPL_ADD (array, i, wcsnlen,
 			      (CPU_FEATURE_USABLE (AVX2)
+			       && CPU_FEATURE_USABLE (BMI2)
 			       && CPU_FEATURE_USABLE (RTM)),
 			      __wcsnlen_avx2_rtm)
 	      IFUNC_IMPL_ADD (array, i, wcsnlen,
diff --git a/sysdeps/x86_64/multiarch/strlen-avx2.S b/sysdeps/x86_64/multiarch/strlen-avx2.S
index 1caae9e6bc..eb92f587b4 100644
--- a/sysdeps/x86_64/multiarch/strlen-avx2.S
+++ b/sysdeps/x86_64/multiarch/strlen-avx2.S
@@ -27,9 +27,11 @@ 
 # ifdef USE_AS_WCSLEN
 #  define VPCMPEQ	vpcmpeqd
 #  define VPMINU	vpminud
+#  define CHAR_SIZE	4
 # else
 #  define VPCMPEQ	vpcmpeqb
 #  define VPMINU	vpminub
+#  define CHAR_SIZE	1
 # endif
 
 # ifndef VZEROUPPER
@@ -41,349 +43,462 @@ 
 # endif
 
 # define VEC_SIZE 32
+# define PAGE_SIZE 4096
+# define LOG_PAGE_SIZE 12
 
 	.section SECTION(.text),"ax",@progbits
 ENTRY (STRLEN)
 # ifdef USE_AS_STRNLEN
-	/* Check for zero length.  */
+	/* Check zero length.  */
 	test	%RSI_LP, %RSI_LP
 	jz	L(zero)
+	/* Store max len in R8_LP before adjusting if using WCSLEN.  */
+	mov	%RSI_LP, %R8_LP
 #  ifdef USE_AS_WCSLEN
 	shl	$2, %RSI_LP
 #  elif defined __ILP32__
 	/* Clear the upper 32 bits.  */
 	movl	%esi, %esi
 #  endif
-	mov	%RSI_LP, %R8_LP
 # endif
-	movl	%edi, %ecx
+	movl	%edi, %eax
 	movq	%rdi, %rdx
 	vpxor	%xmm0, %xmm0, %xmm0
-
+	/* Shift left eax to clear all bits not relevant to page cross
+	   check. This saves 2 bytes of code as opposed to using andl with
+	   PAGE_SIZE - 1. Then compare with PAGE_SIZE - VEC_SIZE shifted
+	   left by the same amount (an imm32 either way).  */
+	sall	$(32 - LOG_PAGE_SIZE), %eax
 	/* Check if we may cross page boundary with one vector load.  */
-	andl	$(2 * VEC_SIZE - 1), %ecx
-	cmpl	$VEC_SIZE, %ecx
-	ja	L(cros_page_boundary)
+	cmpl	$((PAGE_SIZE - VEC_SIZE) << (32 - LOG_PAGE_SIZE)), %eax
+	ja	L(cross_page_boundary)
 
 	/* Check the first VEC_SIZE bytes.  */
-	VPCMPEQ (%rdi), %ymm0, %ymm1
-	vpmovmskb %ymm1, %eax
-	testl	%eax, %eax
-
+	VPCMPEQ	(%rdi), %ymm0, %ymm1
+	vpmovmskb	%ymm1, %eax
 # ifdef USE_AS_STRNLEN
-	jnz	L(first_vec_x0_check)
-	/* Adjust length and check the end of data.  */
-	subq	$VEC_SIZE, %rsi
-	jbe	L(max)
-# else
-	jnz	L(first_vec_x0)
+	/* If length < VEC_SIZE handle special.  */
+	cmpq	$VEC_SIZE, %rsi
+	jbe	L(first_vec_x0)
 # endif
-
-	/* Align data for aligned loads in the loop.  */
-	addq	$VEC_SIZE, %rdi
-	andl	$(VEC_SIZE - 1), %ecx
-	andq	$-VEC_SIZE, %rdi
+	/* If empty continue to aligned_more. Otherwise return bit
+	   position of first match.  */
+	testl	%eax, %eax
+	jz	L(aligned_more)
+	tzcntl	%eax, %eax
+# ifdef USE_AS_WCSLEN
+	shrl	$2, %eax
+# endif
+	VZEROUPPER_RETURN
 
 # ifdef USE_AS_STRNLEN
-	/* Adjust length.  */
-	addq	%rcx, %rsi
+L(zero):
+	xorl	%eax, %eax
+	ret
 
-	subq	$(VEC_SIZE * 4), %rsi
-	jbe	L(last_4x_vec_or_less)
+	.p2align 4
+L(first_vec_x0):
+	/* Set bit for max len so that tzcnt will return min of max len
+	   and position of first match.  */
+	btsq	%rsi, %rax
+	tzcntl	%eax, %eax
+#  ifdef USE_AS_WCSLEN
+	shrl	$2, %eax
+#  endif
+	VZEROUPPER_RETURN
 # endif
-	jmp	L(more_4x_vec)
 
 	.p2align 4
-L(cros_page_boundary):
-	andl	$(VEC_SIZE - 1), %ecx
-	andq	$-VEC_SIZE, %rdi
-	VPCMPEQ (%rdi), %ymm0, %ymm1
-	vpmovmskb %ymm1, %eax
-	/* Remove the leading bytes.  */
-	sarl	%cl, %eax
-	testl	%eax, %eax
-	jz	L(aligned_more)
+L(first_vec_x1):
 	tzcntl	%eax, %eax
+	/* Safe to use 32 bit instructions as these are only called for
+	   size = [1, 159].  */
 # ifdef USE_AS_STRNLEN
-	/* Check the end of data.  */
-	cmpq	%rax, %rsi
-	jbe	L(max)
+	/* Use ecx which was computed earlier to compute correct value.
+	 */
+	subl	$(VEC_SIZE * 4 + 1), %ecx
+	addl	%ecx, %eax
+# else
+	subl	%edx, %edi
+	incl	%edi
+	addl	%edi, %eax
 # endif
-	addq	%rdi, %rax
-	addq	%rcx, %rax
-	subq	%rdx, %rax
 # ifdef USE_AS_WCSLEN
-	shrq	$2, %rax
+	shrl	$2, %eax
 # endif
-L(return_vzeroupper):
-	ZERO_UPPER_VEC_REGISTERS_RETURN
+	VZEROUPPER_RETURN
 
 	.p2align 4
-L(aligned_more):
+L(first_vec_x2):
+	tzcntl	%eax, %eax
+	/* Safe to use 32 bit instructions as these are only called for
+	   size = [1, 159].  */
 # ifdef USE_AS_STRNLEN
-        /* "rcx" is less than VEC_SIZE.  Calculate "rdx + rcx - VEC_SIZE"
-	    with "rdx - (VEC_SIZE - rcx)" instead of "(rdx + rcx) - VEC_SIZE"
-	    to void possible addition overflow.  */
-	negq	%rcx
-	addq	$VEC_SIZE, %rcx
-
-	/* Check the end of data.  */
-	subq	%rcx, %rsi
-	jbe	L(max)
+	/* Use ecx which was computed earlier to compute correct value.
+	 */
+	subl	$(VEC_SIZE * 3 + 1), %ecx
+	addl	%ecx, %eax
+# else
+	subl	%edx, %edi
+	addl	$(VEC_SIZE + 1), %edi
+	addl	%edi, %eax
 # endif
+# ifdef USE_AS_WCSLEN
+	shrl	$2, %eax
+# endif
+	VZEROUPPER_RETURN
 
-	addq	$VEC_SIZE, %rdi
+	.p2align 4
+L(first_vec_x3):
+	tzcntl	%eax, %eax
+	/* Safe to use 32 bit instructions as these are only called for
+	   size = [1, 159].  */
+# ifdef USE_AS_STRNLEN
+	/* Use ecx which was computed earlier to compute correct value.
+	 */
+	subl	$(VEC_SIZE * 2 + 1), %ecx
+	addl	%ecx, %eax
+# else
+	subl	%edx, %edi
+	addl	$(VEC_SIZE * 2 + 1), %edi
+	addl	%edi, %eax
+# endif
+# ifdef USE_AS_WCSLEN
+	shrl	$2, %eax
+# endif
+	VZEROUPPER_RETURN
 
+	.p2align 4
+L(first_vec_x4):
+	tzcntl	%eax, %eax
+	/* Safe to use 32 bit instructions as these are only called for
+	   size = [1, 159].  */
 # ifdef USE_AS_STRNLEN
-	subq	$(VEC_SIZE * 4), %rsi
-	jbe	L(last_4x_vec_or_less)
+	/* Use ecx which was computed earlier to compute correct value.
+	 */
+	subl	$(VEC_SIZE + 1), %ecx
+	addl	%ecx, %eax
+# else
+	subl	%edx, %edi
+	addl	$(VEC_SIZE * 3 + 1), %edi
+	addl	%edi, %eax
 # endif
+# ifdef USE_AS_WCSLEN
+	shrl	$2, %eax
+# endif
+	VZEROUPPER_RETURN
 
-L(more_4x_vec):
+	.p2align 5
+L(aligned_more):
+	/* Align data to VEC_SIZE - 1. This is the same number of
+	   instructions as using andq with -VEC_SIZE but saves 4 bytes of
+	   code on the x4 check.  */
+	orq	$(VEC_SIZE - 1), %rdi
+L(cross_page_continue):
 	/* Check the first 4 * VEC_SIZE.  Only one VEC_SIZE at a time
 	   since data is only aligned to VEC_SIZE.  */
-	VPCMPEQ (%rdi), %ymm0, %ymm1
-	vpmovmskb %ymm1, %eax
-	testl	%eax, %eax
-	jnz	L(first_vec_x0)
-
-	VPCMPEQ VEC_SIZE(%rdi), %ymm0, %ymm1
-	vpmovmskb %ymm1, %eax
+# ifdef USE_AS_STRNLEN
+	/* + 1 because rdi is aligned to VEC_SIZE - 1. + CHAR_SIZE because
+	   it simplies the logic in last_4x_vec_or_less.  */
+	leaq	(VEC_SIZE * 4 + CHAR_SIZE + 1)(%rdi), %rcx
+	subq	%rdx, %rcx
+# endif
+	/* Load first VEC regardless.  */
+	VPCMPEQ	1(%rdi), %ymm0, %ymm1
+# ifdef USE_AS_STRNLEN
+	/* Adjust length. If near end handle specially.  */
+	subq	%rcx, %rsi
+	jb	L(last_4x_vec_or_less)
+# endif
+	vpmovmskb	%ymm1, %eax
 	testl	%eax, %eax
 	jnz	L(first_vec_x1)
 
-	VPCMPEQ (VEC_SIZE * 2)(%rdi), %ymm0, %ymm1
-	vpmovmskb %ymm1, %eax
+	VPCMPEQ	(VEC_SIZE + 1)(%rdi), %ymm0, %ymm1
+	vpmovmskb	%ymm1, %eax
 	testl	%eax, %eax
 	jnz	L(first_vec_x2)
 
-	VPCMPEQ (VEC_SIZE * 3)(%rdi), %ymm0, %ymm1
-	vpmovmskb %ymm1, %eax
+	VPCMPEQ	(VEC_SIZE * 2 + 1)(%rdi), %ymm0, %ymm1
+	vpmovmskb	%ymm1, %eax
 	testl	%eax, %eax
 	jnz	L(first_vec_x3)
 
-	addq	$(VEC_SIZE * 4), %rdi
-
-# ifdef USE_AS_STRNLEN
-	subq	$(VEC_SIZE * 4), %rsi
-	jbe	L(last_4x_vec_or_less)
-# endif
-
-	/* Align data to 4 * VEC_SIZE.  */
-	movq	%rdi, %rcx
-	andl	$(4 * VEC_SIZE - 1), %ecx
-	andq	$-(4 * VEC_SIZE), %rdi
+	VPCMPEQ	(VEC_SIZE * 3 + 1)(%rdi), %ymm0, %ymm1
+	vpmovmskb	%ymm1, %eax
+	testl	%eax, %eax
+	jnz	L(first_vec_x4)
 
+	/* Align data to VEC_SIZE * 4 - 1.  */
 # ifdef USE_AS_STRNLEN
-	/* Adjust length.  */
+	/* Before adjusting length check if at last VEC_SIZE * 4.  */
+	cmpq	$(VEC_SIZE * 4 - 1), %rsi
+	jbe	L(last_4x_vec_or_less_load)
+	incq	%rdi
+	movl	%edi, %ecx
+	orq	$(VEC_SIZE * 4 - 1), %rdi
+	andl	$(VEC_SIZE * 4 - 1), %ecx
+	/* Readjust length.  */
 	addq	%rcx, %rsi
+# else
+	incq	%rdi
+	orq	$(VEC_SIZE * 4 - 1), %rdi
 # endif
-
+	/* Compare 4 * VEC at a time forward.  */
 	.p2align 4
 L(loop_4x_vec):
-	/* Compare 4 * VEC at a time forward.  */
-	vmovdqa (%rdi), %ymm1
-	vmovdqa	VEC_SIZE(%rdi), %ymm2
-	vmovdqa	(VEC_SIZE * 2)(%rdi), %ymm3
-	vmovdqa	(VEC_SIZE * 3)(%rdi), %ymm4
-	VPMINU	%ymm1, %ymm2, %ymm5
-	VPMINU	%ymm3, %ymm4, %ymm6
-	VPMINU	%ymm5, %ymm6, %ymm5
-
-	VPCMPEQ	%ymm5, %ymm0, %ymm5
-	vpmovmskb %ymm5, %eax
-	testl	%eax, %eax
-	jnz	L(4x_vec_end)
-
-	addq	$(VEC_SIZE * 4), %rdi
-
-# ifndef USE_AS_STRNLEN
-	jmp	L(loop_4x_vec)
-# else
+# ifdef USE_AS_STRNLEN
+	/* Break if at end of length.  */
 	subq	$(VEC_SIZE * 4), %rsi
-	ja	L(loop_4x_vec)
-
-L(last_4x_vec_or_less):
-	/* Less than 4 * VEC and aligned to VEC_SIZE.  */
-	addl	$(VEC_SIZE * 2), %esi
-	jle	L(last_2x_vec)
+	jb	L(last_4x_vec_or_less_cmpeq)
+# endif
+	/* Save some code size by microfusing VPMINU with the load. Since
+	   the matches in ymm2/ymm4 can only be returned if there where no
+	   matches in ymm1/ymm3 respectively there is no issue with overlap.
+	 */
+	vmovdqa	1(%rdi), %ymm1
+	VPMINU	(VEC_SIZE + 1)(%rdi), %ymm1, %ymm2
+	vmovdqa	(VEC_SIZE * 2 + 1)(%rdi), %ymm3
+	VPMINU	(VEC_SIZE * 3 + 1)(%rdi), %ymm3, %ymm4
+
+	VPMINU	%ymm2, %ymm4, %ymm5
+	VPCMPEQ	%ymm5, %ymm0, %ymm5
+	vpmovmskb	%ymm5, %ecx
 
-	VPCMPEQ (%rdi), %ymm0, %ymm1
-	vpmovmskb %ymm1, %eax
-	testl	%eax, %eax
-	jnz	L(first_vec_x0)
+	subq	$-(VEC_SIZE * 4), %rdi
+	testl	%ecx, %ecx
+	jz	L(loop_4x_vec)
 
-	VPCMPEQ VEC_SIZE(%rdi), %ymm0, %ymm1
-	vpmovmskb %ymm1, %eax
-	testl	%eax, %eax
-	jnz	L(first_vec_x1)
 
-	VPCMPEQ (VEC_SIZE * 2)(%rdi), %ymm0, %ymm1
-	vpmovmskb %ymm1, %eax
+	VPCMPEQ	%ymm1, %ymm0, %ymm1
+	vpmovmskb	%ymm1, %eax
+	subq	%rdx, %rdi
 	testl	%eax, %eax
+	jnz	L(last_vec_return_x0)
 
-	jnz	L(first_vec_x2_check)
-	subl	$VEC_SIZE, %esi
-	jle	L(max)
-
-	VPCMPEQ (VEC_SIZE * 3)(%rdi), %ymm0, %ymm1
-	vpmovmskb %ymm1, %eax
+	VPCMPEQ	%ymm2, %ymm0, %ymm2
+	vpmovmskb	%ymm2, %eax
 	testl	%eax, %eax
-
-	jnz	L(first_vec_x3_check)
-	movq	%r8, %rax
-#  ifdef USE_AS_WCSLEN
+	jnz	L(last_vec_return_x1)
+
+	/* Combine last 2 VEC.  */
+	VPCMPEQ	%ymm3, %ymm0, %ymm3
+	vpmovmskb	%ymm3, %eax
+	/* rcx has combined result from all 4 VEC. It will only be used if
+	   the first 3 other VEC all did not contain a match.  */
+	salq	$32, %rcx
+	orq	%rcx, %rax
+	tzcntq	%rax, %rax
+	subq	$(VEC_SIZE * 2 - 1), %rdi
+	addq	%rdi, %rax
+# ifdef USE_AS_WCSLEN
 	shrq	$2, %rax
-#  endif
+# endif
 	VZEROUPPER_RETURN
 
+
+# ifdef USE_AS_STRNLEN
 	.p2align 4
-L(last_2x_vec):
-	addl	$(VEC_SIZE * 2), %esi
-	VPCMPEQ (%rdi), %ymm0, %ymm1
-	vpmovmskb %ymm1, %eax
-	testl	%eax, %eax
+L(last_4x_vec_or_less_load):
+	/* Depending on entry adjust rdi / prepare first VEC in ymm1.  */
+	subq	$-(VEC_SIZE * 4), %rdi
+L(last_4x_vec_or_less_cmpeq):
+	VPCMPEQ	1(%rdi), %ymm0, %ymm1
+L(last_4x_vec_or_less):
 
-	jnz	L(first_vec_x0_check)
-	subl	$VEC_SIZE, %esi
-	jle	L(max)
+	vpmovmskb	%ymm1, %eax
+	/* If remaining length > VEC_SIZE * 2. This works if esi is off by
+	   VEC_SIZE * 4.  */
+	testl	$(VEC_SIZE * 2), %esi
+	jnz	L(last_4x_vec)
 
-	VPCMPEQ VEC_SIZE(%rdi), %ymm0, %ymm1
-	vpmovmskb %ymm1, %eax
+	/* length may have been negative or positive by an offset of
+	   VEC_SIZE * 4 depending on where this was called from. This fixes
+	   that.  */
+	andl	$(VEC_SIZE * 4 - 1), %esi
 	testl	%eax, %eax
-	jnz	L(first_vec_x1_check)
-	movq	%r8, %rax
-#  ifdef USE_AS_WCSLEN
-	shrq	$2, %rax
-#  endif
-	VZEROUPPER_RETURN
+	jnz	L(last_vec_x1_check)
 
-	.p2align 4
-L(first_vec_x0_check):
+	subl	$VEC_SIZE, %esi
+	jb	L(max)
+
+	VPCMPEQ	(VEC_SIZE + 1)(%rdi), %ymm0, %ymm1
+	vpmovmskb	%ymm1, %eax
 	tzcntl	%eax, %eax
 	/* Check the end of data.  */
-	cmpq	%rax, %rsi
-	jbe	L(max)
+	cmpl	%eax, %esi
+	jb	L(max)
+	subq	%rdx, %rdi
+	addl	$(VEC_SIZE + 1), %eax
 	addq	%rdi, %rax
-	subq	%rdx, %rax
 #  ifdef USE_AS_WCSLEN
 	shrq	$2, %rax
 #  endif
 	VZEROUPPER_RETURN
+# endif
 
 	.p2align 4
-L(first_vec_x1_check):
+L(last_vec_return_x0):
 	tzcntl	%eax, %eax
-	/* Check the end of data.  */
-	cmpq	%rax, %rsi
-	jbe	L(max)
-	addq	$VEC_SIZE, %rax
+	subq	$(VEC_SIZE * 4 - 1), %rdi
 	addq	%rdi, %rax
-	subq	%rdx, %rax
-#  ifdef USE_AS_WCSLEN
+# ifdef USE_AS_WCSLEN
 	shrq	$2, %rax
-#  endif
+# endif
 	VZEROUPPER_RETURN
 
 	.p2align 4
-L(first_vec_x2_check):
+L(last_vec_return_x1):
 	tzcntl	%eax, %eax
-	/* Check the end of data.  */
-	cmpq	%rax, %rsi
-	jbe	L(max)
-	addq	$(VEC_SIZE * 2), %rax
+	subq	$(VEC_SIZE * 3 - 1), %rdi
 	addq	%rdi, %rax
-	subq	%rdx, %rax
-#  ifdef USE_AS_WCSLEN
+# ifdef USE_AS_WCSLEN
 	shrq	$2, %rax
-#  endif
+# endif
 	VZEROUPPER_RETURN
 
+# ifdef USE_AS_STRNLEN
 	.p2align 4
-L(first_vec_x3_check):
+L(last_vec_x1_check):
+
 	tzcntl	%eax, %eax
 	/* Check the end of data.  */
-	cmpq	%rax, %rsi
-	jbe	L(max)
-	addq	$(VEC_SIZE * 3), %rax
+	cmpl	%eax, %esi
+	jb	L(max)
+	subq	%rdx, %rdi
+	incl	%eax
 	addq	%rdi, %rax
-	subq	%rdx, %rax
 #  ifdef USE_AS_WCSLEN
 	shrq	$2, %rax
 #  endif
 	VZEROUPPER_RETURN
 
-	.p2align 4
 L(max):
 	movq	%r8, %rax
+	VZEROUPPER_RETURN
+
+	.p2align 4
+L(last_4x_vec):
+	/* Test first 2x VEC normally.  */
+	testl	%eax, %eax
+	jnz	L(last_vec_x1)
+
+	VPCMPEQ	(VEC_SIZE + 1)(%rdi), %ymm0, %ymm1
+	vpmovmskb	%ymm1, %eax
+	testl	%eax, %eax
+	jnz	L(last_vec_x2)
+
+	/* Normalize length.  */
+	andl	$(VEC_SIZE * 4 - 1), %esi
+	VPCMPEQ	(VEC_SIZE * 2 + 1)(%rdi), %ymm0, %ymm1
+	vpmovmskb	%ymm1, %eax
+	testl	%eax, %eax
+	jnz	L(last_vec_x3)
+
+	subl	$(VEC_SIZE * 3), %esi
+	jb	L(max)
+
+	VPCMPEQ	(VEC_SIZE * 3 + 1)(%rdi), %ymm0, %ymm1
+	vpmovmskb	%ymm1, %eax
+	tzcntl	%eax, %eax
+	/* Check the end of data.  */
+	cmpl	%eax, %esi
+	jb	L(max)
+	subq	%rdx, %rdi
+	addl	$(VEC_SIZE * 3 + 1), %eax
+	addq	%rdi, %rax
 #  ifdef USE_AS_WCSLEN
 	shrq	$2, %rax
 #  endif
 	VZEROUPPER_RETURN
 
-	.p2align 4
-L(zero):
-	xorl	%eax, %eax
-	ret
-# endif
 
 	.p2align 4
-L(first_vec_x0):
+L(last_vec_x1):
+	/* essentially duplicates of first_vec_x1 but use 64 bit
+	   instructions.  */
 	tzcntl	%eax, %eax
+	subq	%rdx, %rdi
+	incl	%eax
 	addq	%rdi, %rax
-	subq	%rdx, %rax
-# ifdef USE_AS_WCSLEN
+#  ifdef USE_AS_WCSLEN
 	shrq	$2, %rax
-# endif
+#  endif
 	VZEROUPPER_RETURN
 
 	.p2align 4
-L(first_vec_x1):
+L(last_vec_x2):
+	/* essentially duplicates of first_vec_x1 but use 64 bit
+	   instructions.  */
 	tzcntl	%eax, %eax
-	addq	$VEC_SIZE, %rax
+	subq	%rdx, %rdi
+	addl	$(VEC_SIZE + 1), %eax
 	addq	%rdi, %rax
-	subq	%rdx, %rax
-# ifdef USE_AS_WCSLEN
+#  ifdef USE_AS_WCSLEN
 	shrq	$2, %rax
-# endif
+#  endif
 	VZEROUPPER_RETURN
 
 	.p2align 4
-L(first_vec_x2):
+L(last_vec_x3):
 	tzcntl	%eax, %eax
-	addq	$(VEC_SIZE * 2), %rax
+	subl	$(VEC_SIZE * 2), %esi
+	/* Check the end of data.  */
+	cmpl	%eax, %esi
+	jb	L(max_end)
+	subq	%rdx, %rdi
+	addl	$(VEC_SIZE * 2 + 1), %eax
 	addq	%rdi, %rax
-	subq	%rdx, %rax
-# ifdef USE_AS_WCSLEN
+#  ifdef USE_AS_WCSLEN
 	shrq	$2, %rax
-# endif
+#  endif
+	VZEROUPPER_RETURN
+L(max_end):
+	movq	%r8, %rax
 	VZEROUPPER_RETURN
+# endif
 
+	/* Cold case for crossing page with first load.	 */
 	.p2align 4
-L(4x_vec_end):
-	VPCMPEQ	%ymm1, %ymm0, %ymm1
-	vpmovmskb %ymm1, %eax
-	testl	%eax, %eax
-	jnz	L(first_vec_x0)
-	VPCMPEQ %ymm2, %ymm0, %ymm2
-	vpmovmskb %ymm2, %eax
+L(cross_page_boundary):
+	/* Align data to VEC_SIZE - 1.  */
+	orq	$(VEC_SIZE - 1), %rdi
+	VPCMPEQ	-(VEC_SIZE - 1)(%rdi), %ymm0, %ymm1
+	vpmovmskb	%ymm1, %eax
+	/* Remove the leading bytes. sarxl only uses bits [5:0] of COUNT
+	   so no need to manually mod rdx.  */
+	sarxl	%edx, %eax, %eax
+# ifdef USE_AS_STRNLEN
 	testl	%eax, %eax
-	jnz	L(first_vec_x1)
-	VPCMPEQ %ymm3, %ymm0, %ymm3
-	vpmovmskb %ymm3, %eax
+	jnz	L(cross_page_less_vec)
+	leaq	1(%rdi), %rcx
+	subq	%rdx, %rcx
+	/* Check length.  */
+	cmpq	%rsi, %rcx
+	jb	L(cross_page_continue)
+	movq	%r8, %rax
+# else
 	testl	%eax, %eax
-	jnz	L(first_vec_x2)
-	VPCMPEQ %ymm4, %ymm0, %ymm4
-	vpmovmskb %ymm4, %eax
-L(first_vec_x3):
+	jz	L(cross_page_continue)
 	tzcntl	%eax, %eax
-	addq	$(VEC_SIZE * 3), %rax
-	addq	%rdi, %rax
-	subq	%rdx, %rax
-# ifdef USE_AS_WCSLEN
-	shrq	$2, %rax
+#  ifdef USE_AS_WCSLEN
+	shrl	$2, %eax
+#  endif
 # endif
+L(return_vzeroupper):
+	ZERO_UPPER_VEC_REGISTERS_RETURN
+
+# ifdef USE_AS_STRNLEN
+	.p2align 4
+L(cross_page_less_vec):
+	tzcntl	%eax, %eax
+	cmpq	%rax, %rsi
+	cmovb	%esi, %eax
+#  ifdef USE_AS_WCSLEN
+	shrl	$2, %eax
+#  endif
 	VZEROUPPER_RETURN
+# endif
 
 END (STRLEN)
 #endif