[v2,ARM,2/x] : MVE ACLE intrinsics framework patch.

Hello Kyrill,

In this patch (v2) all the review comments mentioned in previous patch (v1) are
addressed.

(v1) https://gcc.gnu.org/ml/gcc-patches/2019-12/msg01395.html

#####################

Hello,

This patch is part of MVE ACLE intrinsics framework.
This patches add support to update (read/write) the APSR (Application Program Status Register)
register and FPSCR (Floating-point Status and Control Register) register for MVE.
This patch also enables thumb2 mov RTL patterns for MVE.

A new feature bit vfp_base is added. This bit is enabled for all VFP, MVE and MVE with floating point
extensions. This bit is used to enable the macro TARGET_VFP_BASE. For all the VFP instructions, RTL patterns,
status and control registers are guarded by TARGET_HAVE_FLOAT. But this patch modifies that and the
common instructions, RTL patterns, status and control registers bewteen MVE and VFP are guarded by
TARGET_VFP_BASE macro.

The RTL pattern set_fpscr and get_fpscr are updated to use VFPCC_REGNUM because few MVE intrinsics
set/get carry bit of FPSCR register.

Please refer to Arm reference manual [1] for more details.
[1] https://developer.arm.com/docs/ddi0553/latest

Regression tested on arm-none-eabi and found no regressions.

Ok for trunk?

Thanks,
Srinath
gcc/ChangeLog:

2020-20-11  Andre Vieira  <andre.simoesdiasvieira@arm.com>
	    Mihail Ionescu  <mihail.ionescu@arm.com>
	    Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* common/config/arm/arm-common.c (arm_asm_auto_mfpu): When vfp_base
	feature bit is on and -mfpu=auto is passed as compiler option, do not
	generate error on not finding any match fpu. Because in this case fpu
	is not required.
	* config/arm/arm-cpus.in (vfp_base): Define feature bit, this bit is
	enabled for MVE and also for all VFP extensions.
	(VFPv2): Modify fgroup to enable vfp_base feature bit when ever VFPv2
	is enabled.
	(MVE): Define fgroup to enable feature bits mve, vfp_base and armv7em.
	(MVE_FP): Define fgroup to enable feature bits is fgroup MVE and FPv5
	along with feature bits mve_float.
	(mve): Modify add options in armv8.1-m.main arch for MVE.
	(mve.fp): Modify add options in armv8.1-m.main arch for MVE with
	floating point.
	* config/arm/arm.c (use_return_insn): Replace the
	check with TARGET_VFP_BASE.
	(thumb2_legitimate_index_p): Replace TARGET_HARD_FLOAT with
	TARGET_VFP_BASE.
	(arm_rtx_costs_internal): Replace "TARGET_HARD_FLOAT || TARGET_HAVE_MVE"
	with TARGET_VFP_BASE, to allow cost calculations for copies in MVE as
	well.
	(arm_get_vfp_saved_size): Replace TARGET_HARD_FLOAT with
	TARGET_VFP_BASE, to allow space calculation for VFP registers in MVE
	as well.
	(arm_compute_frame_layout): Likewise.
	(arm_save_coproc_regs): Likewise.
	(arm_fixed_condition_code_regs): Modify to enable using VFPCC_REGNUM
	in MVE as well.
	(arm_hard_regno_mode_ok): Replace "TARGET_HARD_FLOAT || TARGET_HAVE_MVE"
	with equivalent macro TARGET_VFP_BASE.
	(arm_expand_epilogue_apcs_frame): Likewise.
	(arm_expand_epilogue): Likewise.
	(arm_conditional_register_usage): Likewise.
	(arm_declare_function_name): Add check to skip printing .fpu directive
	in assembly file when TARGET_VFP_BASE is enabled and fpu_to_print is
	"softvfp".
	* config/arm/arm.h (TARGET_VFP_BASE): Define.
	* config/arm/arm.md (arch): Add "mve" to arch.
	(eq_attr "arch" "mve"): Enable on TARGET_HAVE_MVE is true.
	(vfp_pop_multiple_with_writeback): Replace "TARGET_HARD_FLOAT
	|| TARGET_HAVE_MVE" with equivalent macro TARGET_VFP_BASE.
	* config/arm/constraints.md (Uf): Define for MVE.
	* config/arm/thumb2.md (thumb2_movsfcc_soft_insn): Modify target guard
	to not allow for MVE.
	* config/arm/unspecs.md (UNSPEC_GET_FPSCR): Move to volatile unspecs
	enum.
	(VUNSPEC_GET_FPSCR): Define.
	* config/arm/vfp.md (thumb2_movhi_vfp): Add support for VMSR and VMRS
	instructions which move to general-purpose Register from Floating-point
	Special register and vice-versa.
	(thumb2_movhi_fp16): Likewise.
	(thumb2_movsi_vfp): Add support for VMSR and VMRS instructions along
	with MCR and MRC instructions which set and get Floating-point Status
	and Control Register (FPSCR).
	(movdi_vfp): Modify pattern to enable Single-precision scalar float move
	in MVE.
	(thumb2_movdf_vfp): Modify pattern to enable Double-precision scalar
	float move patterns in MVE.
	(thumb2_movsfcc_vfp): Modify pattern to enable single float conditional
	code move patterns of VFP also in MVE by adding TARGET_VFP_BASE check.
	(thumb2_movdfcc_vfp): Modify pattern to enable double float conditional
	code move patterns of VFP also in MVE by adding TARGET_VFP_BASE check.
	(push_multi_vfp): Add support to use VFP VPUSH pattern for MVE by adding
	TARGET_VFP_BASE check.
	(set_fpscr): Add support to set FPSCR register for MVE. Modify pattern
	using VFPCC_REGNUM as few MVE intrinsics use carry bit of FPSCR
	register.
	(get_fpscr): Add support to get FPSCR register for MVE. Modify pattern
        using VFPCC_REGNUM as few MVE intrinsics use carry bit of FPSCR
	register.

gcc/testsuite/ChangeLog:

2020-02-11  Srinath Parvathaneni  <srinath.parvathaneni@arm.com>

	* gcc.target/arm/mve/intrinsics/mve_fp_fpu1.c: New test.
	* gcc.target/arm/mve/intrinsics/mve_fp_fpu2.c: Likewise.
	* gcc.target/arm/mve/intrinsics/mve_fpu1.c: Likewise.
	* gcc.target/arm/mve/intrinsics/mve_fpu2.c: Likewise.
	* gcc.target/arm/mve/intrinsics/mve_fpu3.c: Likewise.


###############     Attachment also inlined for ease of reply    ###############


>From 997855cd3551822ba74c7b3c5edb52d97dd0b1d3 Mon Sep 17 00:00:00 2001
From: Srinath Parvathaneni <srinath.parvathaneni@arm.com>
Date: Tue, 11 Feb 2020 17:29:32 +0000
Subject: [PATCH] [PATCH][ARM][GCC][2/x]: MVE ACLE intrinsics framework patch.

---
 gcc/common/config/arm/arm-common.c                 |   2 +-
 gcc/config/arm/arm-cpus.in                         |  14 ++-
 gcc/config/arm/arm.c                               |  29 ++---
 gcc/config/arm/arm.h                               |  13 +++
 gcc/config/arm/arm.md                              |   8 +-
 gcc/config/arm/constraints.md                      |   5 +-
 gcc/config/arm/thumb2.md                           |   2 +-
 gcc/config/arm/unspecs.md                          |   2 +-
 gcc/config/arm/vfp.md                              | 129 +++++++++++++--------
 .../gcc.target/arm/mve/intrinsics/mve_fp_fpu1.c    |  14 +++
 .../gcc.target/arm/mve/intrinsics/mve_fp_fpu2.c    |  14 +++
 .../gcc.target/arm/mve/intrinsics/mve_fpu1.c       |  14 +++
 .../gcc.target/arm/mve/intrinsics/mve_fpu2.c       |  14 +++
 .../gcc.target/arm/mve/intrinsics/mve_fpu3.c       |  12 ++
 14 files changed, 200 insertions(+), 72 deletions(-)
 create mode 100644 gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fp_fpu1.c
 create mode 100644 gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fp_fpu2.c
 create mode 100644 gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fpu1.c
 create mode 100644 gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fpu2.c
 create mode 100644 gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fpu3.c

Hi Srinath,

On 2/14/20 4:34 PM, Srinath Parvathaneni wrote:
> Hello Kyrill,
>
> In this patch (v2) all the review comments mentioned in previous patch 
> (v1) are
> addressed.
>
> (v1) https://gcc.gnu.org/ml/gcc-patches/2019-12/msg01395.html
>
> #####################
>
> Hello,
>
> This patch is part of MVE ACLE intrinsics framework.
> This patches add support to update (read/write) the APSR (Application 
> Program Status Register)
> register and FPSCR (Floating-point Status and Control Register) 
> register for MVE.
> This patch also enables thumb2 mov RTL patterns for MVE.
>
> A new feature bit vfp_base is added. This bit is enabled for all VFP, 
> MVE and MVE with floating point
> extensions. This bit is used to enable the macro TARGET_VFP_BASE. For 
> all the VFP instructions, RTL patterns,
> status and control registers are guarded by TARGET_HAVE_FLOAT. But 
> this patch modifies that and the
> common instructions, RTL patterns, status and control registers 
> bewteen MVE and VFP are guarded by
> TARGET_VFP_BASE macro.
>
> The RTL pattern set_fpscr and get_fpscr are updated to use 
> VFPCC_REGNUM because few MVE intrinsics
> set/get carry bit of FPSCR register.
>
> Please refer to Arm reference manual [1] for more details.
> [1] https://developer.arm.com/docs/ddi0553/latest
>
> Regression tested on arm-none-eabi and found no regressions.
>
> Ok for trunk?

Ok (please test a big-endian target as well, as per the 1st framework 
patch).

Thanks,

Kyrill


>
> Thanks,
> Srinath
> gcc/ChangeLog:
>
> 2020-20-11  Andre Vieira <andre.simoesdiasvieira@arm.com>
>             Mihail Ionescu  <mihail.ionescu@arm.com>
>             Srinath Parvathaneni <srinath.parvathaneni@arm.com>
>
>         * common/config/arm/arm-common.c (arm_asm_auto_mfpu): When 
> vfp_base
>         feature bit is on and -mfpu=auto is passed as compiler option, 
> do not
>         generate error on not finding any match fpu. Because in this 
> case fpu
>         is not required.
>         * config/arm/arm-cpus.in (vfp_base): Define feature bit, this 
> bit is
>         enabled for MVE and also for all VFP extensions.
>         (VFPv2): Modify fgroup to enable vfp_base feature bit when 
> ever VFPv2
>         is enabled.
>         (MVE): Define fgroup to enable feature bits mve, vfp_base and 
> armv7em.
>         (MVE_FP): Define fgroup to enable feature bits is fgroup MVE 
> and FPv5
>         along with feature bits mve_float.
>         (mve): Modify add options in armv8.1-m.main arch for MVE.
>         (mve.fp): Modify add options in armv8.1-m.main arch for MVE with
>         floating point.
>         * config/arm/arm.c (use_return_insn): Replace the
>         check with TARGET_VFP_BASE.
>         (thumb2_legitimate_index_p): Replace TARGET_HARD_FLOAT with
>         TARGET_VFP_BASE.
>         (arm_rtx_costs_internal): Replace "TARGET_HARD_FLOAT || 
> TARGET_HAVE_MVE"
>         with TARGET_VFP_BASE, to allow cost calculations for copies in 
> MVE as
>         well.
>         (arm_get_vfp_saved_size): Replace TARGET_HARD_FLOAT with
>         TARGET_VFP_BASE, to allow space calculation for VFP registers 
> in MVE
>         as well.
>         (arm_compute_frame_layout): Likewise.
>         (arm_save_coproc_regs): Likewise.
>         (arm_fixed_condition_code_regs): Modify to enable using 
> VFPCC_REGNUM
>         in MVE as well.
>         (arm_hard_regno_mode_ok): Replace "TARGET_HARD_FLOAT || 
> TARGET_HAVE_MVE"
>         with equivalent macro TARGET_VFP_BASE.
>         (arm_expand_epilogue_apcs_frame): Likewise.
>         (arm_expand_epilogue): Likewise.
>         (arm_conditional_register_usage): Likewise.
>         (arm_declare_function_name): Add check to skip printing .fpu 
> directive
>         in assembly file when TARGET_VFP_BASE is enabled and 
> fpu_to_print is
>         "softvfp".
>         * config/arm/arm.h (TARGET_VFP_BASE): Define.
>         * config/arm/arm.md (arch): Add "mve" to arch.
>         (eq_attr "arch" "mve"): Enable on TARGET_HAVE_MVE is true.
>         (vfp_pop_multiple_with_writeback): Replace "TARGET_HARD_FLOAT
>         || TARGET_HAVE_MVE" with equivalent macro TARGET_VFP_BASE.
>         * config/arm/constraints.md (Uf): Define for MVE.
>         * config/arm/thumb2.md (thumb2_movsfcc_soft_insn): Modify 
> target guard
>         to not allow for MVE.
>         * config/arm/unspecs.md (UNSPEC_GET_FPSCR): Move to volatile 
> unspecs
>         enum.
>         (VUNSPEC_GET_FPSCR): Define.
>         * config/arm/vfp.md (thumb2_movhi_vfp): Add support for VMSR 
> and VMRS
>         instructions which move to general-purpose Register from 
> Floating-point
>         Special register and vice-versa.
>         (thumb2_movhi_fp16): Likewise.
>         (thumb2_movsi_vfp): Add support for VMSR and VMRS instructions 
> along
>         with MCR and MRC instructions which set and get Floating-point 
> Status
>         and Control Register (FPSCR).
>         (movdi_vfp): Modify pattern to enable Single-precision scalar 
> float move
>         in MVE.
>         (thumb2_movdf_vfp): Modify pattern to enable Double-precision 
> scalar
>         float move patterns in MVE.
>         (thumb2_movsfcc_vfp): Modify pattern to enable single float 
> conditional
>         code move patterns of VFP also in MVE by adding 
> TARGET_VFP_BASE check.
>         (thumb2_movdfcc_vfp): Modify pattern to enable double float 
> conditional
>         code move patterns of VFP also in MVE by adding 
> TARGET_VFP_BASE check.
>         (push_multi_vfp): Add support to use VFP VPUSH pattern for MVE 
> by adding
>         TARGET_VFP_BASE check.
>         (set_fpscr): Add support to set FPSCR register for MVE. Modify 
> pattern
>         using VFPCC_REGNUM as few MVE intrinsics use carry bit of FPSCR
>         register.
>         (get_fpscr): Add support to get FPSCR register for MVE. Modify 
> pattern
>         using VFPCC_REGNUM as few MVE intrinsics use carry bit of FPSCR
>         register.
>
> gcc/testsuite/ChangeLog:
>
> 2020-02-11  Srinath Parvathaneni <srinath.parvathaneni@arm.com>
>
>         * gcc.target/arm/mve/intrinsics/mve_fp_fpu1.c: New test.
>         * gcc.target/arm/mve/intrinsics/mve_fp_fpu2.c: Likewise.
>         * gcc.target/arm/mve/intrinsics/mve_fpu1.c: Likewise.
>         * gcc.target/arm/mve/intrinsics/mve_fpu2.c: Likewise.
>         * gcc.target/arm/mve/intrinsics/mve_fpu3.c: Likewise.
>
>
> ###############     Attachment also inlined for ease of reply    
> ###############
>
>
> >From 997855cd3551822ba74c7b3c5edb52d97dd0b1d3 Mon Sep 17 00:00:00 2001
> From: Srinath Parvathaneni <srinath.parvathaneni@arm.com>
> Date: Tue, 11 Feb 2020 17:29:32 +0000
> Subject: [PATCH] [PATCH][ARM][GCC][2/x]: MVE ACLE intrinsics framework 
> patch.
>
> ---
>  gcc/common/config/arm/arm-common.c                 |   2 +-
>  gcc/config/arm/arm-cpus.in                         |  14 ++-
>  gcc/config/arm/arm.c                               |  29 ++---
>  gcc/config/arm/arm.h                               |  13 +++
>  gcc/config/arm/arm.md                              |   8 +-
>  gcc/config/arm/constraints.md                      |   5 +-
>  gcc/config/arm/thumb2.md                           |   2 +-
>  gcc/config/arm/unspecs.md                          |   2 +-
>  gcc/config/arm/vfp.md                              | 129 
> +++++++++++++--------
>  .../gcc.target/arm/mve/intrinsics/mve_fp_fpu1.c    |  14 +++
>  .../gcc.target/arm/mve/intrinsics/mve_fp_fpu2.c    |  14 +++
>  .../gcc.target/arm/mve/intrinsics/mve_fpu1.c       |  14 +++
>  .../gcc.target/arm/mve/intrinsics/mve_fpu2.c       |  14 +++
>  .../gcc.target/arm/mve/intrinsics/mve_fpu3.c       |  12 ++
>  14 files changed, 200 insertions(+), 72 deletions(-)
>  create mode 100644 
> gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fp_fpu1.c
>  create mode 100644 
> gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fp_fpu2.c
>  create mode 100644 gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fpu1.c
>  create mode 100644 gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fpu2.c
>  create mode 100644 gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fpu3.c
>
> diff --git a/gcc/common/config/arm/arm-common.c 
> b/gcc/common/config/arm/arm-common.c
> index 30a2a1d..a465966 100644
> --- a/gcc/common/config/arm/arm-common.c
> +++ b/gcc/common/config/arm/arm-common.c
> @@ -1009,7 +1009,7 @@ arm_asm_auto_mfpu (int argc, const char **argv)
>              }
>          }
>
> -      gcc_assert (i != TARGET_FPU_auto);
> +      gcc_assert (i != TARGET_FPU_auto || isa_bit_vfp_base);
>      }
>
>    auto_fpu = (char *) xmalloc (strlen (fpuname) + sizeof ("-mfpu="));
> diff --git a/gcc/config/arm/arm-cpus.in b/gcc/config/arm/arm-cpus.in
> index 96f584d..77b4309 100644
> --- a/gcc/config/arm/arm-cpus.in
> +++ b/gcc/config/arm/arm-cpus.in
> @@ -135,6 +135,10 @@ define feature armv8_1m_main
>  # Floating point and Neon extensions.
>  # VFPv1 is not supported in GCC.
>
> +# This feature bit is enabled for all VFP, MVE and
> +# MVE with floating point extensions.
> +define feature vfp_base
> +
>  # Vector floating point v2.
>  define feature vfpv2
>
> @@ -234,7 +238,7 @@ define fgroup ALL_SIMD ALL_SIMD_INTERNAL 
> ALL_SIMD_EXTERNAL
>
>  # List of all FPU bits to strip out if -mfpu is used to override the
>  # default.  fp16 is deliberately missing from this list.
> -define fgroup ALL_FPU_INTERNAL vfpv2 vfpv3 vfpv4 fpv5 fp16conv fp_dbl 
> ALL_SIMD_INTERNAL
> +define fgroup ALL_FPU_INTERNAL vfp_base vfpv2 vfpv3 vfpv4 fpv5 
> fp16conv fp_dbl ALL_SIMD_INTERNAL
>  # Similarly, but including fp16 and other extensions that aren't part of
>  # -mfpu support.
>  define fgroup ALL_FPU_EXTERNAL fp16 bf16
> @@ -279,10 +283,12 @@ define fgroup ARMv8r      ARMv8a
>  define fgroup ARMv8_1m_main ARMv8m_main armv8_1m_main
>
>  # Useful combinations.
> -define fgroup VFPv2    vfpv2
> +define fgroup VFPv2    vfp_base vfpv2
>  define fgroup VFPv3     VFPv2 vfpv3
>  define fgroup VFPv4     VFPv3 vfpv4 fp16conv
>  define fgroup FPv5      VFPv4 fpv5
> +define fgroup MVE      mve vfp_base armv7em
> +define fgroup MVE_FP   MVE FPv5 fp16 mve_float
>
>  define fgroup FP_DBL    fp_dbl
>  define fgroup FP_D32    FP_DBL fp_d32
> @@ -699,8 +705,8 @@ begin arch armv8.1-m.main
>   option fp add FPv5 fp16
>   option fp.dp add FPv5 FP_DBL fp16
>   option nofp remove ALL_FP
> - option mve add mve armv7em
> - option mve.fp add mve FPv5 fp16 mve_float armv7em
> + option mve add MVE
> + option mve.fp add MVE_FP
>  end arch armv8.1-m.main
>
>  begin arch iwmmxt
> diff --git a/gcc/config/arm/arm.h b/gcc/config/arm/arm.h
> index 10cf0e6..7e993b9 100644
> --- a/gcc/config/arm/arm.h
> +++ b/gcc/config/arm/arm.h
> @@ -334,6 +334,19 @@ emission of floating point pcs attributes.  */
> isa_bit_mve_float) \
>                                 && !TARGET_GENERAL_REGS_ONLY)
>
> +/* MVE have few common instructions as VFP, like VLDM alias VPOP, 
> VLDR, VSTM
> +   alia VPUSH, VSTR and VMOV, VMSR and VMRS.  In the same manner it 
> updates few
> +   registers such as FPCAR, FPCCR, FPDSCR, FPSCR, MVFR0, MVFR1 and 
> MVFR2.  All
> +   the VFP instructions, RTL patterns and register are guarded by
> +   TARGET_HARD_FLOAT.  But the common instructions, RTL pattern and 
> registers
> +   between MVE and VFP will be guarded by the following macro 
> TARGET_VFP_BASE
> +   hereafter.  */
> +
> +#define TARGET_VFP_BASE (arm_float_abi != ARM_FLOAT_ABI_SOFT \
> +                        && bitmap_bit_p (arm_active_target.isa, \
> +                                         isa_bit_vfp_base) \
> +                        && !TARGET_GENERAL_REGS_ONLY)
> +
>  /* Nonzero if integer division instructions supported.  */
>  #define TARGET_IDIV     ((TARGET_ARM && arm_arch_arm_hwdiv)     \
>                           || (TARGET_THUMB && arm_arch_thumb_hwdiv))
> diff --git a/gcc/config/arm/arm.c b/gcc/config/arm/arm.c
> index 3a95ea3..c28a475 100644
> --- a/gcc/config/arm/arm.c
> +++ b/gcc/config/arm/arm.c
> @@ -4295,7 +4295,7 @@ use_return_insn (int iscond, rtx sibling)
>
>    /* Can't be done if any of the VFP regs are pushed,
>       since this also requires an insn.  */
> -  if (TARGET_HARD_FLOAT || TARGET_HAVE_MVE)
> +  if (TARGET_VFP_BASE)
>      for (regno = FIRST_VFP_REGNUM; regno <= LAST_VFP_REGNUM; regno++)
>        if (df_regs_ever_live_p (regno) && !call_used_or_fixed_reg_p 
> (regno))
>          return 0;
> @@ -6289,7 +6289,7 @@ use_vfp_abi (enum arm_pcs pcs_variant, bool 
> is_double)
>      return false;
>
>    return (TARGET_32BIT && TARGET_HARD_FLOAT &&
> -         (TARGET_VFP_DOUBLE || !is_double));
> +        (TARGET_VFP_DOUBLE || !is_double));
>  }
>
>  /* Return true if an argument whose type is TYPE, or mode is MODE, is
> @@ -8512,7 +8512,7 @@ thumb2_legitimate_index_p (machine_mode mode, 
> rtx index, int strict_p)
>
>    /* ??? Combine arm and thumb2 coprocessor addressing modes.  */
>    /* Standard coprocessor addressing modes.  */
> -  if (TARGET_HARD_FLOAT
> +  if (TARGET_VFP_BASE
>        && (mode == SFmode || mode == DFmode))
>      return (code == CONST_INT && INTVAL (index) < 1024
>              /* Thumb-2 allows only > -256 index range for it's core 
> register
> @@ -9905,7 +9905,7 @@ arm_rtx_costs_internal (rtx x, enum rtx_code 
> code, enum rtx_code outer_code,
>            /* Assume that most copies can be done with a single insn,
>               unless we don't have HW FP, in which case everything
>               larger than word mode will require two insns. */
> -         *cost = COSTS_N_INSNS (((!(TARGET_HARD_FLOAT || TARGET_HAVE_MVE)
> +         *cost = COSTS_N_INSNS (((!TARGET_VFP_BASE
>                                     && GET_MODE_SIZE (mode) > 4)
>                                    || mode == DImode)
>                                   ? 2 : 1);
> @@ -20821,7 +20821,7 @@ arm_get_vfp_saved_size (void)
>
>    saved = 0;
>    /* Space for saved VFP registers.  */
> -  if (TARGET_HARD_FLOAT)
> +  if (TARGET_VFP_BASE)
>      {
>        count = 0;
>        for (regno = FIRST_VFP_REGNUM;
> @@ -22364,7 +22364,7 @@ arm_compute_frame_layout (void)
>        func_type = arm_current_func_type ();
>        /* Space for saved VFP registers.  */
>        if (! IS_VOLATILE (func_type)
> -         && (TARGET_HARD_FLOAT || TARGET_HAVE_MVE))
> +         && TARGET_VFP_BASE)
>          saved += arm_get_vfp_saved_size ();
>
>        /* Allocate space for saving/restoring FPCXTNS in Armv8.1-M 
> Mainline
> @@ -22588,7 +22588,7 @@ arm_save_coproc_regs(void)
>          saved_size += 8;
>        }
>
> -  if (TARGET_HARD_FLOAT || TARGET_HAVE_MVE)
> +  if (TARGET_VFP_BASE)
>      {
>        start_reg = FIRST_VFP_REGNUM;
>
> @@ -24546,7 +24546,7 @@ arm_fixed_condition_code_regs (unsigned int 
> *p1, unsigned int *p2)
>      return false;
>
>    *p1 = CC_REGNUM;
> -  *p2 = TARGET_HARD_FLOAT ? VFPCC_REGNUM : INVALID_REGNUM;
> +  *p2 = TARGET_VFP_BASE ? VFPCC_REGNUM : INVALID_REGNUM;
>    return true;
>  }
>
> @@ -24965,7 +24965,7 @@ arm_hard_regno_mode_ok (unsigned int regno, 
> machine_mode mode)
>  {
>    if (GET_MODE_CLASS (mode) == MODE_CC)
>      return (regno == CC_REGNUM
> -           || ((TARGET_HARD_FLOAT || TARGET_HAVE_MVE)
> +           || (TARGET_VFP_BASE
>                  && regno == VFPCC_REGNUM));
>
>    if (regno == CC_REGNUM && GET_MODE_CLASS (mode) != MODE_CC)
> @@ -24982,7 +24982,7 @@ arm_hard_regno_mode_ok (unsigned int regno, 
> machine_mode mode)
>         start of an even numbered register pair.  */
>      return (ARM_NUM_REGS (mode) < 2) || (regno < LAST_LO_REGNUM);
>
> -  if ((TARGET_HARD_FLOAT || TARGET_HAVE_MVE) && IS_VFP_REGNUM (regno))
> +  if (TARGET_VFP_BASE && IS_VFP_REGNUM (regno))
>      {
>        if (mode == DFmode)
>          return VFP_REGNO_OK_FOR_DOUBLE (regno);
> @@ -26933,7 +26933,7 @@ arm_expand_epilogue_apcs_frame (bool 
> really_return)
>          floats_from_frame += 4;
>        }
>
> -  if (TARGET_HARD_FLOAT || TARGET_HAVE_MVE)
> +  if (TARGET_VFP_BASE)
>      {
>        int start_reg;
>        rtx ip_rtx = gen_rtx_REG (SImode, IP_REGNUM);
> @@ -27179,7 +27179,7 @@ arm_expand_epilogue (bool really_return)
>          }
>      }
>
> -  if (TARGET_HARD_FLOAT || TARGET_HAVE_MVE)
> +  if (TARGET_VFP_BASE)
>      {
>        /* Generate VFP register multi-pop.  */
>        int end_reg = LAST_VFP_REGNUM + 1;
> @@ -29695,7 +29695,7 @@ arm_conditional_register_usage (void)
>    if (TARGET_THUMB1)
>      fixed_regs[LR_REGNUM] = call_used_regs[LR_REGNUM] = 1;
>
> -  if (TARGET_32BIT && (TARGET_HARD_FLOAT || TARGET_HAVE_MVE))
> +  if (TARGET_32BIT && TARGET_VFP_BASE)
>      {
>        /* VFPv3 registers are disabled when earlier VFP
>           versions are selected due to the definition of
> @@ -32470,7 +32470,8 @@ arm_declare_function_name (FILE *stream, const 
> char *name, tree decl)
>      = TARGET_SOFT_FLOAT
>          ? "softvfp" : arm_identify_fpu_from_isa (arm_active_target.isa);
>
> -  if (fpu_to_print != arm_last_printed_arch_string)
> +  if (!(!strcmp (fpu_to_print.c_str (), "softvfp") && TARGET_VFP_BASE)
> +      && (fpu_to_print != arm_last_printed_arch_string))
>      {
>        asm_fprintf (asm_out_file, "\t.fpu %s\n", fpu_to_print.c_str ());
>        arm_last_printed_fpu_string = fpu_to_print;
> diff --git a/gcc/config/arm/arm.md b/gcc/config/arm/arm.md
> index 3a12f18..dcafb71 100644
> --- a/gcc/config/arm/arm.md
> +++ b/gcc/config/arm/arm.md
> @@ -129,7 +129,7 @@
>  ; arm_arch6.  "v6t2" for Thumb-2 with arm_arch6 and "v8mb" for ARMv8-M
>  ; Baseline.  This attribute is used to compute attribute "enabled",
>  ; use type "any" to enable an alternative in all cases.
> -(define_attr "arch" 
> "any,a,t,32,t1,t2,v6,nov6,v6t2,v8mb,iwmmxt,iwmmxt2,armv6_or_vfpv3,neon"
> +(define_attr "arch" 
> "any,a,t,32,t1,t2,v6,nov6,v6t2,v8mb,iwmmxt,iwmmxt2,armv6_or_vfpv3,neon,mve"
>    (const_string "any"))
>
>  (define_attr "arch_enabled" "no,yes"
> @@ -183,6 +183,10 @@
>           (and (eq_attr "arch" "neon")
>                (match_test "TARGET_NEON"))
>           (const_string "yes")
> +
> +        (and (eq_attr "arch" "mve")
> +             (match_test "TARGET_HAVE_MVE"))
> +        (const_string "yes")
>          ]
>
>          (const_string "no")))
> @@ -11744,7 +11748,7 @@
>                     (match_operand:SI 2 "const_int_I_operand" "I")))
>       (set (match_operand:DF 3 "vfp_hard_register_operand" "")
>            (mem:DF (match_dup 1)))])]
> -  "TARGET_32BIT && (TARGET_HARD_FLOAT || TARGET_HAVE_MVE)"
> +  "TARGET_32BIT && TARGET_VFP_BASE"
>    "*
>    {
>      int num_regs = XVECLEN (operands[0], 0);
> diff --git a/gcc/config/arm/constraints.md b/gcc/config/arm/constraints.md
> index 3577fb9..0908c79 100644
> --- a/gcc/config/arm/constraints.md
> +++ b/gcc/config/arm/constraints.md
> @@ -38,7 +38,7 @@
>  ;; in all states: Pf, Pg
>
>  ;; The following memory constraints have been used:
> -;; in ARM/Thumb-2 state: Uh, Ut, Uv, Uy, Un, Um, Us
> +;; in ARM/Thumb-2 state: Uh, Ut, Uv, Uy, Un, Um, Us, Uf
>  ;; in ARM state: Uq
>  ;; in Thumb state: Uu, Uw
>  ;; in all states: Q
> @@ -46,6 +46,9 @@
>  (define_register_constraint "Up" "TARGET_HAVE_MVE ? VPR_REG : NO_REGS"
>    "MVE VPR register")
>
> +(define_register_constraint "Uf" "TARGET_HAVE_MVE ? VFPCC_REG : NO_REGS"
> +  "MVE FPCCR register")
> +
>  (define_register_constraint "t" "TARGET_32BIT ? VFP_LO_REGS : NO_REGS"
>   "The VFP registers @code{s0}-@code{s31}.")
>
> diff --git a/gcc/config/arm/thumb2.md b/gcc/config/arm/thumb2.md
> index b0d3bd1..793f670 100644
> --- a/gcc/config/arm/thumb2.md
> +++ b/gcc/config/arm/thumb2.md
> @@ -517,7 +517,7 @@
>                            [(match_operand 4 "cc_register" "") 
> (const_int 0)])
>                           (match_operand:SF 1 "s_register_operand" "0,r")
>                           (match_operand:SF 2 "s_register_operand" 
> "r,0")))]
> -  "TARGET_THUMB2 && TARGET_SOFT_FLOAT"
> +  "TARGET_THUMB2 && TARGET_SOFT_FLOAT && !TARGET_HAVE_MVE"
>    "@
>     it\\t%D3\;mov%D3\\t%0, %2
>     it\\t%d3\;mov%d3\\t%0, %1"
> diff --git a/gcc/config/arm/unspecs.md b/gcc/config/arm/unspecs.md
> index 8f4a705..73588fc 100644
> --- a/gcc/config/arm/unspecs.md
> +++ b/gcc/config/arm/unspecs.md
> @@ -170,6 +170,7 @@
>    UNSPEC_TORC          ; Used by the intrinsic form of the iWMMXt 
> TORC instruction.
>    UNSPEC_TORVSC                ; Used by the intrinsic form of the 
> iWMMXt TORVSC instruction.
>    UNSPEC_TEXTRC                ; Used by the intrinsic form of the 
> iWMMXt TEXTRC instruction.
> +  UNSPEC_GET_FPSCR     ; Represent fetch of FPSCR content.
>  ])
>
>
> @@ -216,7 +217,6 @@
>    VUNSPEC_SLX          ; Represent a store-register-release-exclusive.
>    VUNSPEC_LDA          ; Represent a store-register-acquire.
>    VUNSPEC_STL          ; Represent a store-register-release.
> -  VUNSPEC_GET_FPSCR    ; Represent fetch of FPSCR content.
>    VUNSPEC_SET_FPSCR    ; Represent assign of FPSCR content.
>    VUNSPEC_PROBE_STACK_RANGE ; Represent stack range probing.
>    VUNSPEC_CDP          ; Represent the coprocessor cdp instruction.
> diff --git a/gcc/config/arm/vfp.md b/gcc/config/arm/vfp.md
> index ab16a6b..eb6ae7b 100644
> --- a/gcc/config/arm/vfp.md
> +++ b/gcc/config/arm/vfp.md
> @@ -74,10 +74,10 @@
>  (define_insn "*thumb2_movhi_vfp"
>   [(set
>     (match_operand:HI 0 "nonimmediate_operand"
> -    "=rk, r, l, r, m, r, *t, r, *t")
> +    "=rk, r, l, r, m, r, *t, r, *t, Up, r")
>     (match_operand:HI 1 "general_operand"
> -    "rk, I, Py, n, r, m, r, *t, *t"))]
> - "TARGET_THUMB2 && TARGET_HARD_FLOAT
> +    "rk, I, Py, n, r, m, r, *t, *t, r, Up"))]
> + "TARGET_THUMB2 && TARGET_VFP_BASE
>    && !TARGET_VFP_FP16INST
>    && (register_operand (operands[0], HImode)
>         || register_operand (operands[1], HImode))"
> @@ -99,20 +99,24 @@
>        return "vmov%?\t%0, %1\t%@ int";
>      case 8:
>        return "vmov%?.f32\t%0, %1\t%@ int";
> +    case 9:
> +      return "vmsr%?\t P0, %1\t@ movhi";
> +    case 10:
> +      return "vmrs%?\t %0, P0\t@ movhi";
>      default:
>        gcc_unreachable ();
>      }
>  }
>   [(set_attr "predicable" "yes")
>    (set_attr "predicable_short_it"
> -   "yes, no, yes, no, no, no, no, no, no")
> +   "yes, no, yes, no, no, no, no, no, no, no, no")
>    (set_attr "type"
>     "mov_reg, mov_imm, mov_imm, mov_imm, store_4, load_4,\
> -    f_mcr, f_mrc, fmov")
> -  (set_attr "arch" "*, *, *, v6t2, *, *, *, *, *")
> -  (set_attr "pool_range" "*, *, *, *, *, 4094, *, *, *")
> -  (set_attr "neg_pool_range" "*, *, *, *, *, 250, *, *, *")
> -  (set_attr "length" "2, 4, 2, 4, 4, 4, 4, 4, 4")]
> +    f_mcr, f_mrc, fmov, mve_move, mve_move")
> +  (set_attr "arch" "*, *, *, v6t2, *, *, *, *, *, mve, mve")
> +  (set_attr "pool_range" "*, *, *, *, *, 4094, *, *, *, *, *")
> +  (set_attr "neg_pool_range" "*, *, *, *, *, 250, *, *, *, *, *")
> +  (set_attr "length" "2, 4, 2, 4, 4, 4, 4, 4, 4, 4, 4")]
>  )
>
>  ;; Patterns for HI moves which provide more data transfer 
> instructions when FP16
> @@ -170,10 +174,10 @@
>  (define_insn "*thumb2_movhi_fp16"
>   [(set
>     (match_operand:HI 0 "nonimmediate_operand"
> -    "=rk, r, l, r, m, r, *t, r, *t")
> +    "=rk, r, l, r, m, r, *t, r, *t, Up, r")
>     (match_operand:HI 1 "general_operand"
> -    "rk, I, Py, n, r, m, r, *t, *t"))]
> - "TARGET_THUMB2 && TARGET_VFP_FP16INST
> +    "rk, I, Py, n, r, m, r, *t, *t, r, Up"))]
> + "TARGET_THUMB2 && (TARGET_VFP_FP16INST || TARGET_HAVE_MVE)
>    && (register_operand (operands[0], HImode)
>         || register_operand (operands[1], HImode))"
>  {
> @@ -194,21 +198,25 @@
>        return "vmov.f16\t%0, %1\t%@ int";
>      case 8:
>        return "vmov%?.f32\t%0, %1\t%@ int";
> +    case 9:
> +      return "vmsr%?\tP0, %1\t%@ movhi";
> +    case 10:
> +      return "vmrs%?\t%0, P0\t%@ movhi";
>      default:
>        gcc_unreachable ();
>      }
>  }
>   [(set_attr "predicable"
> -   "yes, yes, yes, yes, yes, yes, no, no, yes")
> +   "yes, yes, yes, yes, yes, yes, no, no, yes, yes, yes")
>    (set_attr "predicable_short_it"
> -   "yes, no, yes, no, no, no, no, no, no")
> +   "yes, no, yes, no, no, no, no, no, no, no, no")
>    (set_attr "type"
>     "mov_reg, mov_imm, mov_imm, mov_imm, store_4, load_4,\
> -    f_mcr, f_mrc, fmov")
> -  (set_attr "arch" "*, *, *, v6t2, *, *, *, *, *")
> -  (set_attr "pool_range" "*, *, *, *, *, 4094, *, *, *")
> -  (set_attr "neg_pool_range" "*, *, *, *, *, 250, *, *, *")
> -  (set_attr "length" "2, 4, 2, 4, 4, 4, 4, 4, 4")]
> +    f_mcr, f_mrc, fmov, mve_move, mve_move")
> +  (set_attr "arch" "*, *, *, v6t2, *, *, *, *, *, mve, mve")
> +  (set_attr "pool_range" "*, *, *, *, *, 4094, *, *, *, *, *")
> +  (set_attr "neg_pool_range" "*, *, *, *, *, 250, *, *, *, *, *")
> +  (set_attr "length" "2, 4, 2, 4, 4, 4, 4, 4, 4, 4, 4")]
>  )
>
>  ;; SImode moves
> @@ -258,9 +266,11 @@
>  ;; is chosen with length 2 when the instruction is predicated for
>  ;; arm_restrict_it.
>  (define_insn "*thumb2_movsi_vfp"
> -  [(set (match_operand:SI 0 "nonimmediate_operand" 
> "=rk,r,l,r,r,lk*r,m,*t, r,*t,*t,  *Uv")
> -       (match_operand:SI 1 "general_operand" "rk,I,Py,K,j,mi,lk*r, 
> r,*t,*t,*UvTu,*t"))]
> -  "TARGET_THUMB2 && TARGET_HARD_FLOAT
> +  [(set (match_operand:SI 0 "nonimmediate_operand" 
> "=rk,r,l,r,r,l,*hk,m,*m,*t,\
> + r,*t,*t,*Uv, Up, r,Uf,r")
> +       (match_operand:SI 1 "general_operand" 
> "rk,I,Py,K,j,mi,*mi,l,*hk,r,*t,\
> +                                              *t,*UvTu,*t, r, Up,r,Uf"))]
> +  "TARGET_THUMB2 && TARGET_VFP_BASE
>     && (   s_register_operand (operands[0], SImode)
>         || s_register_operand (operands[1], SImode))"
>    "*
> @@ -275,30 +285,44 @@
>      case 4:
>        return \"movw%?\\t%0, %1\";
>      case 5:
> +    case 6:
>        /* Cannot load it directly, split to load it via MOV / MOVT.  */
>        if (!MEM_P (operands[1]) && arm_disable_literal_pool)
>          return \"#\";
>        return \"ldr%?\\t%0, %1\";
> -    case 6:
> -      return \"str%?\\t%1, %0\";
>      case 7:
> -      return \"vmov%?\\t%0, %1\\t%@ int\";
>      case 8:
> -      return \"vmov%?\\t%0, %1\\t%@ int\";
> +      return \"str%?\\t%1, %0\";
>      case 9:
> +      return \"vmov%?\\t%0, %1\\t%@ int\";
> +    case 10:
> +      return \"vmov%?\\t%0, %1\\t%@ int\";
> +    case 11:
>        return \"vmov%?.f32\\t%0, %1\\t%@ int\";
> -    case 10: case 11:
> +    case 12: case 13:
>        return output_move_vfp (operands);
> +    case 14:
> +      return \"vmsr\\t P0, %1\";
> +    case 15:
> +      return \"vmrs\\t %0, P0\";
> +    case 16:
> +      return \"mcr\\tp10, 7, %1, cr1, cr0, 0\\t @SET_FPSCR\";
> +    case 17:
> +      return \"mrc\\tp10, 7, %0, cr1, cr0, 0\\t @GET_FPSCR\";
>      default:
>        gcc_unreachable ();
>      }
>    "
>    [(set_attr "predicable" "yes")
> -   (set_attr "predicable_short_it" 
> "yes,no,yes,no,no,no,no,no,no,no,no,no")
> -   (set_attr "type" 
> "mov_reg,mov_reg,mov_reg,mvn_reg,mov_imm,load_4,store_4,f_mcr,f_mrc,fmov,f_loads,f_stores")
> -   (set_attr "length" "2,4,2,4,4,4,4,4,4,4,4,4")
> -   (set_attr "pool_range" "*,*,*,*,*,1018,*,*,*,*,1018,*")
> -   (set_attr "neg_pool_range" "*,*,*,*,*, 0,*,*,*,*,1008,*")]
> +   (set_attr "predicable_short_it" 
> "yes,no,yes,no,no,no,no,no,no,no,no,no,no,\
> +             no,no,no,no,no")
> +   (set_attr "type" 
> "mov_reg,mov_reg,mov_reg,mvn_reg,mov_imm,load_4,load_4,\
> + store_4,store_4,f_mcr,f_mrc,fmov,f_loads,f_stores,mve_move,\
> +            mve_move,mrs,mrs")
> +   (set_attr "length" "2,4,2,4,4,4,4,4,4,4,4,4,4,4,4,4,4,4")
> +   (set_attr "pool_range" "*,*,*,*,*,1018,4094,*,*,*,*,*,1018,*,*,*,*,*")
> +   (set_attr "arch" "*,*,*,*,*,*,*,*,*,*,*,*,*,*,mve,mve,mve,mve")
> +   (set_attr "neg_pool_range" "*,*,*,*,*,   0, 
> 0,*,*,*,*,*,1008,*,*,*,*,*")]
>  )
>
>
> @@ -306,12 +330,12 @@
>
>  (define_insn "*movdi_vfp"
>    [(set (match_operand:DI 0 "nonimmediate_di_operand" 
> "=r,r,r,r,r,r,m,w,!r,w,w, Uv")
> -       (match_operand:DI 1 "di_operand" 
> "r,rDa,Db,Dc,mi,mi,r,r,w,w,UvTu,w"))]
> -  "TARGET_32BIT && TARGET_HARD_FLOAT
> +       (match_operand:DI 1 "di_operand" 
> "r,rDa,Db,Dc,mi,mi,r,r,w,w,UvTu,w"))]
> +  "TARGET_32BIT && TARGET_VFP_BASE
>     && (   register_operand (operands[0], DImode)
>         || register_operand (operands[1], DImode))
> -   && !(TARGET_NEON && CONST_INT_P (operands[1])
> -       && simd_immediate_valid_for_move (operands[1], DImode, NULL, 
> NULL))"
> +   && !((TARGET_NEON || TARGET_HAVE_MVE) && CONST_INT_P (operands[1])
> +       && simd_immediate_valid_for_move (operands[1], DImode, NULL, 
> NULL))"
>    "*
>    switch (which_alternative)
>      {
> @@ -333,7 +357,7 @@
>      case 8:
>        return \"vmov%?\\t%Q0, %R0, %P1\\t%@ int\";
>      case 9:
> -      if (TARGET_VFP_SINGLE)
> +      if (TARGET_VFP_SINGLE || TARGET_HAVE_MVE)
>          return \"vmov%?.f32\\t%0, %1\\t%@ int\;vmov%?.f32\\t%p0, 
> %p1\\t%@ int\";
>        else
>          return \"vmov%?.f64\\t%P0, %P1\\t%@ int\";
> @@ -390,9 +414,15 @@
>      case 6: /* S register from immediate.  */
>        return \"vmov.f16\\t%0, %1\t%@ __<fporbf>\";
>      case 7: /* S register from memory.  */
> -      return \"vld1.16\\t{%z0}, %A1\";
> +      if (TARGET_HAVE_MVE)
> +       return \"vldr.16\\t%0, %A1\";
> +      else
> +       return \"vld1.16\\t{%z0}, %A1\";
>      case 8: /* Memory from S register.  */
> -      return \"vst1.16\\t{%z1}, %A0\";
> +      if (TARGET_HAVE_MVE)
> +       return \"vstr.16\\t%1, %A0\";
> +      else
> +       return \"vst1.16\\t{%z1}, %A0\";
>      case 9: /* ARM register from constant.  */
>        {
>          long bits;
> @@ -593,7 +623,7 @@
>  (define_insn "*thumb2_movsf_vfp"
>    [(set (match_operand:SF 0 "nonimmediate_operand" "=t,?r,t, t  ,Uv,r 
> ,m,t,r")
>          (match_operand:SF 1 "hard_sf_operand"      " ?r,t,Dv,UvHa,t, 
> mHa,r,t,r"))]
> -  "TARGET_THUMB2 && TARGET_HARD_FLOAT
> +  "TARGET_THUMB2 && TARGET_VFP_BASE
>     && (   s_register_operand (operands[0], SFmode)
>         || s_register_operand (operands[1], SFmode))"
>    "*
> @@ -682,7 +712,7 @@
>  (define_insn "*thumb2_movdf_vfp"
>    [(set (match_operand:DF 0 "nonimmediate_soft_df_operand" "=w,?r,w 
> ,w,w  ,Uv,r ,m,w,r")
>          (match_operand:DF 1 "hard_df_operand" " ?r,w,Dy,G,UvHa,w, 
> mHa,r, w,r"))]
> -  "TARGET_THUMB2 && TARGET_HARD_FLOAT
> +  "TARGET_THUMB2 && TARGET_VFP_BASE
>     && (   register_operand (operands[0], DFmode)
>         || register_operand (operands[1], DFmode))"
>    "*
> @@ -760,7 +790,7 @@
>              [(match_operand 4 "cc_register" "") (const_int 0)])
>            (match_operand:SF 1 "s_register_operand" "0,t,t,0,?r,?r,0,t,t")
>            (match_operand:SF 2 "s_register_operand" 
> "t,0,t,?r,0,?r,t,0,t")))]
> -  "TARGET_THUMB2 && TARGET_HARD_FLOAT && !arm_restrict_it"
> +  "TARGET_THUMB2 && TARGET_VFP_BASE && !arm_restrict_it"
>    "@
>     it\\t%D3\;vmov%D3.f32\\t%0, %2
>     it\\t%d3\;vmov%d3.f32\\t%0, %1
> @@ -806,7 +836,8 @@
>              [(match_operand 4 "cc_register" "") (const_int 0)])
>            (match_operand:DF 1 "s_register_operand" "0,w,w,0,?r,?r,0,w,w")
>            (match_operand:DF 2 "s_register_operand" 
> "w,0,w,?r,0,?r,w,0,w")))]
> -  "TARGET_THUMB2 && TARGET_HARD_FLOAT && TARGET_VFP_DOUBLE && 
> !arm_restrict_it"
> +  "TARGET_THUMB2 && TARGET_VFP_BASE && TARGET_VFP_DOUBLE
> +   && !arm_restrict_it"
>    "@
>     it\\t%D3\;vmov%D3.f64\\t%P0, %P2
>     it\\t%d3\;vmov%d3.f64\\t%P0, %P1
> @@ -1977,7 +2008,7 @@
>      [(set (match_operand:BLK 0 "memory_operand" "=m")
>            (unspec:BLK [(match_operand:DF 1 "vfp_register_operand" "")]
>                        UNSPEC_PUSH_MULT))])]
> -  "TARGET_32BIT && TARGET_HARD_FLOAT"
> +  "TARGET_32BIT && TARGET_VFP_BASE"
>    "* return vfp_output_vstmd (operands);"
>    [(set_attr "type" "f_stored")]
>  )
> @@ -2065,16 +2096,18 @@
>
>  ;; Write Floating-point Status and Control Register.
>  (define_insn "set_fpscr"
> -  [(unspec_volatile [(match_operand:SI 0 "register_operand" "r")] 
> VUNSPEC_SET_FPSCR)]
> -  "TARGET_HARD_FLOAT"
> +  [(set (reg:SI VFPCC_REGNUM)
> +       (unspec_volatile:SI
> +        [(match_operand:SI 0 "register_operand" "r")] 
> VUNSPEC_SET_FPSCR))]
> +  "TARGET_VFP_BASE"
>    "mcr\\tp10, 7, %0, cr1, cr0, 0\\t @SET_FPSCR"
>    [(set_attr "type" "mrs")])
>
>  ;; Read Floating-point Status and Control Register.
>  (define_insn "get_fpscr"
>    [(set (match_operand:SI 0 "register_operand" "=r")
> -        (unspec_volatile:SI [(const_int 0)] VUNSPEC_GET_FPSCR))]
> -  "TARGET_HARD_FLOAT"
> +       (unspec:SI [(reg:SI VFPCC_REGNUM)] UNSPEC_GET_FPSCR))]
> +  "TARGET_VFP_BASE"
>    "mrc\\tp10, 7, %0, cr1, cr0, 0\\t @GET_FPSCR"
>    [(set_attr "type" "mrs")])
>
> diff --git a/gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fp_fpu1.c 
> b/gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fp_fpu1.c
> new file mode 100644
> index 0000000..17ba616
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fp_fpu1.c
> @@ -0,0 +1,14 @@
> +/* { dg-do compile  } */
> +/* { dg-require-effective-target arm_v8_1m_mve_fp_ok } */
> +/* { dg-additional-options "-march=armv8.1-m.main+mve.fp 
> -mfloat-abi=hard -mthumb" } */
> +
> +#include "arm_mve.h"
> +
> +int8x16_t
> +foo1 (int8x16_t value)
> +{
> +  int8x16_t b = value;
> +  return b;
> +}
> +
> +/* { dg-final { scan-assembler "\.fpu fpv5-sp-d16" }  } */
> diff --git a/gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fp_fpu2.c 
> b/gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fp_fpu2.c
> new file mode 100644
> index 0000000..7b877c4
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fp_fpu2.c
> @@ -0,0 +1,14 @@
> +/* { dg-do compile  } */
> +/* { dg-require-effective-target arm_v8_1m_mve_fp_ok } */
> +/* { dg-additional-options "-march=armv8.1-m.main+mve.fp 
> -mfloat-abi=softfp -mthumb" } */
> +
> +#include "arm_mve.h"
> +
> +int8x16_t
> +foo1 (int8x16_t value)
> +{
> +  int8x16_t b = value;
> +  return b;
> +}
> +
> +/* { dg-final { scan-assembler "\.fpu fpv5-sp-d16" }  } */
> diff --git a/gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fpu1.c 
> b/gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fpu1.c
> new file mode 100644
> index 0000000..85fbb57
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fpu1.c
> @@ -0,0 +1,14 @@
> +/* { dg-do compile  } */
> +/* { dg-require-effective-target arm_v8_1m_mve_ok } */
> +/* { dg-additional-options "-march=armv8.1-m.main+mve 
> -mfloat-abi=hard -mthumb" } */
> +
> +#include "arm_mve.h"
> +
> +int8x16_t
> +foo1 (int8x16_t value)
> +{
> +  int8x16_t b = value;
> +  return b;
> +}
> +
> +/* { dg-final { scan-assembler-not "\.fpu softvfp" }  } */
> diff --git a/gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fpu2.c 
> b/gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fpu2.c
> new file mode 100644
> index 0000000..23b3683
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fpu2.c
> @@ -0,0 +1,14 @@
> +/* { dg-do compile  } */
> +/* { dg-require-effective-target arm_v8_1m_mve_ok } */
> +/* { dg-additional-options "-march=armv8.1-m.main+mve 
> -mfloat-abi=softfp -mthumb" } */
> +
> +#include "arm_mve.h"
> +
> +int8x16_t
> +foo1 (int8x16_t value)
> +{
> +  int8x16_t b = value;
> +  return b;
> +}
> +
> +/* { dg-final { scan-assembler-not "\.fpu softvfp" }  } */
> diff --git a/gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fpu3.c 
> b/gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fpu3.c
> new file mode 100644
> index 0000000..8f7fa34
> --- /dev/null
> +++ b/gcc/testsuite/gcc.target/arm/mve/intrinsics/mve_fpu3.c
> @@ -0,0 +1,12 @@
> +/* { dg-do compile  } */
> +/* { dg-require-effective-target arm_v8_1m_mve_ok } */
> +/* { dg-additional-options "-march=armv8.1-m.main+mve 
> -mfloat-abi=soft -mthumb" } */
> +
> +int
> +foo1 (int value)
> +{
> +  int b = value;
> +  return b;
> +}
> +
> +/* { dg-final { scan-assembler "\.fpu softvfp" }  } */
> -- 
> 2.7.4
>
>