===================================================================
@@ -4135,43 +4135,42 @@ ix86_option_override (void)
static void
ix86_conditional_register_usage (void)
{
- int i;
+ int i, c_mask;
unsigned int j;
- for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
- {
- if (fixed_regs[i] > 1)
- fixed_regs[i] = (fixed_regs[i] == (TARGET_64BIT ? 3 : 2));
- if (call_used_regs[i] > 1)
- call_used_regs[i] = (call_used_regs[i] == (TARGET_64BIT ? 3 : 2));
- }
-
/* The PIC register, if it exists, is fixed. */
j = PIC_OFFSET_TABLE_REGNUM;
if (j != INVALID_REGNUM)
fixed_regs[j] = call_used_regs[j] = 1;
- /* The 64-bit MS_ABI changes the set of call-used registers. */
- if (TARGET_64BIT_MS_ABI)
+ /* For 32-bit targets, squash the REX registers. */
+ if (! TARGET_64BIT)
{
- call_used_regs[SI_REG] = 0;
- call_used_regs[DI_REG] = 0;
- call_used_regs[XMM6_REG] = 0;
- call_used_regs[XMM7_REG] = 0;
+ for (i = FIRST_REX_INT_REG; i <= LAST_REX_INT_REG; i++)
+ fixed_regs[i] = call_used_regs[i] = 1, reg_names[i] = "";
for (i = FIRST_REX_SSE_REG; i <= LAST_REX_SSE_REG; i++)
- call_used_regs[i] = 0;
+ fixed_regs[i] = call_used_regs[i] = 1, reg_names[i] = "";
}
- /* The default setting of CLOBBERED_REGS is for 32-bit; add in the
- other call-clobbered regs for 64-bit. */
- if (TARGET_64BIT)
+ /* See the definition of CALL_USED_REGISTERS in i386.h. */
+ c_mask = (TARGET_64BIT_MS_ABI ? (1 << 3)
+ : TARGET_64BIT ? (1 << 2)
+ : (1 << 1));
+
+ CLEAR_HARD_REG_SET (reg_class_contents[(int)CLOBBERED_REGS]);
+
+ for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
{
- CLEAR_HARD_REG_SET (reg_class_contents[(int)CLOBBERED_REGS]);
+ /* Set/reset conditionally defined registers from
+ CALL_USED_REGISTERS initializer. */
+ if (call_used_regs[i] > 1)
+ call_used_regs[i] = !!(call_used_regs[i] & c_mask);
- for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
- if (TEST_HARD_REG_BIT (reg_class_contents[(int)GENERAL_REGS], i)
- && call_used_regs[i])
- SET_HARD_REG_BIT (reg_class_contents[(int)CLOBBERED_REGS], i);
+ /* Calculate registers of CLOBBERED_REGS register set
+ as call used registers from GENERAL_REGS register set. */
+ if (TEST_HARD_REG_BIT (reg_class_contents[(int)GENERAL_REGS], i)
+ && call_used_regs[i])
+ SET_HARD_REG_BIT (reg_class_contents[(int)CLOBBERED_REGS], i);
}
/* If MMX is disabled, squash the registers. */
@@ -4191,15 +4190,6 @@ ix86_conditional_register_usage (void)
for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
if (TEST_HARD_REG_BIT (reg_class_contents[(int)FLOAT_REGS], i))
fixed_regs[i] = call_used_regs[i] = 1, reg_names[i] = "";
-
- /* If 32-bit, squash the 64-bit registers. */
- if (! TARGET_64BIT)
- {
- for (i = FIRST_REX_INT_REG; i <= LAST_REX_INT_REG; i++)
- reg_names[i] = "";
- for (i = FIRST_REX_SSE_REG; i <= LAST_REX_SSE_REG; i++)
- reg_names[i] = "";
- }
}
===================================================================
@@ -921,12 +921,9 @@ enum target_cpu_default
and are not available for the register allocator.
On the 80386, the stack pointer is such, as is the arg pointer.
- The value is zero if the register is not fixed on either 32 or
- 64 bit targets, one if the register if fixed on both 32 and 64
- bit targets, two if it is only fixed on 32bit targets and three
- if its only fixed on 64bit targets.
- Proper values are computed in TARGET_CONDITIONAL_REGISTER_USAGE.
- */
+ REX registers are disabled for 32bit targets in
+ TARGET_CONDITIONAL_REGISTER_USAGE. */
+
#define FIXED_REGISTERS \
/*ax,dx,cx,bx,si,di,bp,sp,st,st1,st2,st3,st4,st5,st6,st7*/ \
{ 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 0, 0, 0, \
@@ -937,11 +934,10 @@ enum target_cpu_default
/* mm0, mm1, mm2, mm3, mm4, mm5, mm6, mm7*/ \
0, 0, 0, 0, 0, 0, 0, 0, \
/* r8, r9, r10, r11, r12, r13, r14, r15*/ \
- 2, 2, 2, 2, 2, 2, 2, 2, \
+ 0, 0, 0, 0, 0, 0, 0, 0, \
/*xmm8,xmm9,xmm10,xmm11,xmm12,xmm13,xmm14,xmm15*/ \
- 2, 2, 2, 2, 2, 2, 2, 2 }
+ 0, 0, 0, 0, 0, 0, 0, 0 }
-
/* 1 for registers not available across function calls.
These must include the FIXED_REGISTERS and also any
registers that can be used without being saved.
@@ -949,25 +945,26 @@ enum target_cpu_default
and the register where structure-value addresses are passed.
Aside from that, you can include as many other registers as you like.
- The value is zero if the register is not call used on either 32 or
- 64 bit targets, one if the register if call used on both 32 and 64
- bit targets, two if it is only call used on 32bit targets and three
- if its only call used on 64bit targets.
- Proper values are computed in TARGET_CONDITIONAL_REGISTER_USAGE.
-*/
+ Value is set to 1 if the register is call used unconditionally.
+ Bit one is set if the register is call used on TARGET_32BIT ABI.
+ Bit two is set if the register is call used on TARGET_64BIT ABI.
+ Bit three is set if the register is call used on TARGET_64BIT_MS_ABI.
+
+ Proper values are computed in TARGET_CONDITIONAL_REGISTER_USAGE. */
+
#define CALL_USED_REGISTERS \
/*ax,dx,cx,bx,si,di,bp,sp,st,st1,st2,st3,st4,st5,st6,st7*/ \
-{ 1, 1, 1, 0, 3, 3, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
+{ 1, 1, 1, 0, 4, 4, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, \
/*arg,flags,fpsr,fpcr,frame*/ \
1, 1, 1, 1, 1, \
/*xmm0,xmm1,xmm2,xmm3,xmm4,xmm5,xmm6,xmm7*/ \
- 1, 1, 1, 1, 1, 1, 1, 1, \
+ 1, 1, 1, 1, 1, 1, 6, 6, \
/* mm0, mm1, mm2, mm3, mm4, mm5, mm6, mm7*/ \
1, 1, 1, 1, 1, 1, 1, 1, \
/* r8, r9, r10, r11, r12, r13, r14, r15*/ \
1, 1, 1, 1, 2, 2, 2, 2, \
/*xmm8,xmm9,xmm10,xmm11,xmm12,xmm13,xmm14,xmm15*/ \
- 1, 1, 1, 1, 1, 1, 1, 1 }
+ 6, 6, 6, 6, 6, 6, 6, 6 }
/* Order in which to allocate registers. Each register must be
listed once, even those in FIXED_REGISTERS. List frame pointer
@@ -1203,11 +1200,11 @@ enum reg_class
NO_REGS,
AREG, DREG, CREG, BREG, SIREG, DIREG,
AD_REGS, /* %eax/%edx for DImode */
- CLOBBERED_REGS, /* call-clobbered integers */
Q_REGS, /* %eax %ebx %ecx %edx */
NON_Q_REGS, /* %esi %edi %ebp %esp */
INDEX_REGS, /* %eax %ebx %ecx %edx %esi %edi %ebp */
LEGACY_REGS, /* %eax %ebx %ecx %edx %esi %edi %ebp %esp */
+ CLOBBERED_REGS, /* call-clobbered integer registers */
GENERAL_REGS, /* %eax %ebx %ecx %edx %esi %edi %ebp %esp
%r8 %r9 %r10 %r11 %r12 %r13 %r14 %r15 */
FP_TOP_REG, FP_SECOND_REG, /* %st(0) %st(1) */
@@ -1253,10 +1250,10 @@ enum reg_class
"AREG", "DREG", "CREG", "BREG", \
"SIREG", "DIREG", \
"AD_REGS", \
- "CLOBBERED_REGS", \
"Q_REGS", "NON_Q_REGS", \
"INDEX_REGS", \
"LEGACY_REGS", \
+ "CLOBBERED_REGS", \
"GENERAL_REGS", \
"FP_TOP_REG", "FP_SECOND_REG", \
"FLOAT_REGS", \
@@ -1274,9 +1271,8 @@ enum reg_class
/* Define which registers fit in which classes. This is an initializer
for a vector of HARD_REG_SET of length N_REG_CLASSES.
- Note that the default setting of CLOBBERED_REGS is for 32-bit; this
- is adjusted by TARGET_CONDITIONAL_REGISTER_USAGE for the 64-bit ABI
- in effect. */
+ Note that CLOBBERED_REGS are calculated by
+ TARGET_CONDITIONAL_REGISTER_USAGE. */
#define REG_CLASS_CONTENTS \
{ { 0x00, 0x0 }, \
@@ -1284,11 +1280,11 @@ enum reg_class
{ 0x04, 0x0 }, { 0x08, 0x0 }, /* CREG, BREG */ \
{ 0x10, 0x0 }, { 0x20, 0x0 }, /* SIREG, DIREG */ \
{ 0x03, 0x0 }, /* AD_REGS */ \
- { 0x07, 0x0 }, /* CLOBBERED_REGS */ \
{ 0x0f, 0x0 }, /* Q_REGS */ \
{ 0x1100f0, 0x1fe0 }, /* NON_Q_REGS */ \
{ 0x7f, 0x1fe0 }, /* INDEX_REGS */ \
{ 0x1100ff, 0x0 }, /* LEGACY_REGS */ \
+ { 0x00, 0x0 }, /* CLOBBERED_REGS */ \
{ 0x1100ff, 0x1fe0 }, /* GENERAL_REGS */ \
{ 0x100, 0x0 }, { 0x0200, 0x0 },/* FP_TOP_REG, FP_SECOND_REG */\
{ 0xff00, 0x0 }, /* FLOAT_REGS */ \
Hello! This patch rewrites ix86_conditional_register_usage to improve following things: - Do not mark REX registers in FIXED_REGISTERS. We know that no 32bit target supports them, so we can disable REX registers at ix86_conditional_register_usage as well. - Use bitmaps in CALL_USED_REGISTERS to conditionally mark used registers for different ABIs, while still allowing -fcall-used-REG and -fcall-saved-REG options to be used. This brings TARGET_64BIT_MS_ABI to the same level as other ABIs and allows future ABIs to be handled. - Calculate CLOBBERED_REGS for 32bit targets in the same way as for 64bit targets, removing another 32bit/64bit difference. The regclass definition has to be moved just before GENERAL_REGS, since it is derived from this register class. We depend on fixed register definition to avoid allocation of ESP and REX registers for CLOBBERED_REGS class. This is the same approach as 64bit targets have to avoid ESP, and the same approach as 32bit targets have to avoid REX registers in GENERAL_REGS class. - Some trivial code reorderings, so we don't process non-existing registers. 2012-08-13 Uros Bizjak <ubizjak@gmail.com> * config/i386/i386.h (FIXED_REGISTERS): Do not mark REX registers here. (CALL_USED_REGISTERS): Use bitmaps to mark call-used registers for different ABIs. (enum reg_class): Move CLOBBERED_REGS just before GENERAL_REGS. (REG_CLASS_NAMES): Update. (REG_CLASS_CONTENTS): Update. Clear CLOBBERED_REGS members. * config/i386/i386.c (ix86_conditional_register_usage): Disable REX registers on 32bit targets. Handle bitmaps from CALL_USED_REGISTERS initializer. Calculate CLOBBERED_REGS register set from GENERAL_REGS also for 32bit targets. Do not change call used register set for TARGET_64BIT_MS_ABI separately. Patch was bootstrapped and regression tested on x86_64-pc-linux-gnu {,-m32} and i686-pc-linux-gnu. Patch was committed to mainline SVN. Uros.