diff mbox

[i386] : Split movdi_via_fpu

Message ID CAFULd4aPsYXFzXGrBERM-JSZjFET4wF=SLf39SK_kXEj3OMyOw@mail.gmail.com
State New
Headers show

Commit Message

Uros Bizjak Nov. 29, 2011, 6:13 p.m. UTC 
Hello!

Attached patch splits movdi_via_fpu to loaddi_via_fpu and
storedi_via_fpu. As a consequence, independent insns can be scheduled
between load and store, and insn length is now calculated correctly.

2011-11-29  Uros Bizjak  <ubizjak@gmail.com>

	* config/i386/sync.md (UNSPEC_LDA, UNSPEC_STA): New unspecs.
	(movdi_via_fpu): Remove.
	(loaddi_via_fpu): New insn pattern.
	(storedi_via_fpu): Ditto.
	(atomic_loaddi_fpu): Use loaddi_via_fpu and storedi_via_fpu.
	(atomic_storedi_fpu): Ditto.
	* reg-stack.c (get_true_reg): Handle UNSPEC_LDA.
	(subst_stack_regs_pat): Handle UNSPEC_STA.

Tested on x86_64-pc-linux-gnu {,-m32}. Patch will be committed soon to
SVN mainline.

Uros.
diff mbox

Patch

Index: config/i386/sync.md
===================================================================
--- config/i386/sync.md	(revision 181804)
+++ config/i386/sync.md	(working copy)
@@ -23,6 +23,8 @@ 
   UNSPEC_SFENCE
   UNSPEC_MFENCE
   UNSPEC_MOVA	; For __atomic support
+  UNSPEC_LDA
+  UNSPEC_STA
 ])
 
 (define_c_enum "unspecv" [
@@ -180,7 +182,10 @@ 
 	mem = dst;
 
       if (FP_REG_P (tmp))
-	emit_insn (gen_movdi_via_fpu (mem, src, tmp));
+        {
+	  emit_insn (gen_loaddi_via_fpu (tmp, src));
+	  emit_insn (gen_storedi_via_fpu (mem, tmp));
+	}
       else
 	{
 	  adjust_reg_mode (tmp, DImode);
@@ -258,7 +263,8 @@ 
 
       if (FP_REG_P (tmp))
 	{
-	  emit_insn (gen_movdi_via_fpu (dst, src, tmp));
+	  emit_insn (gen_loaddi_via_fpu (tmp, src));
+	  emit_insn (gen_storedi_via_fpu (dst, tmp));
 	  DONE;
 	}
       else
@@ -276,16 +282,28 @@ 
 ;; operations.  But the fix_trunc patterns want way more setup than we want
 ;; to provide.  Note that the scratch is DFmode instead of XFmode in order
 ;; to make it easy to allocate a scratch in either SSE or FP_REGs above.
-(define_insn "movdi_via_fpu"
+
+(define_insn "loaddi_via_fpu"
+  [(set (match_operand:DF 0 "register_operand" "=f")
+	(unspec:DF [(match_operand:DI 1 "memory_operand" "m")] UNSPEC_LDA))]
+  "TARGET_80387"
+  "fild%Z1\t%1"
+  [(set_attr "type" "fmov")
+   (set_attr "mode" "DF")
+   (set_attr "fp_int_src" "true")])
+
+(define_insn "storedi_via_fpu"
   [(set (match_operand:DI 0 "memory_operand" "=m")
-	(unspec:DI [(match_operand:DI 1 "memory_operand" "m")] UNSPEC_MOVA))
-   (clobber (match_operand:DF 2 "register_operand" "=f"))]
+	(unspec:DI [(match_operand:DF 1 "register_operand" "f")] UNSPEC_STA))]
   "TARGET_80387"
-  "fild%Z1\t%1\;fistp%Z0\t%0"
-  [(set_attr "type" "multi")
-   ;; Worst case based on full sib+offset32 addressing modes
-   (set_attr "length" "14")])
+{
+  gcc_assert (find_regno_note (insn, REG_DEAD, FIRST_STACK_REG) != NULL_RTX);
 
+  return "fistp%Z0\t%0";
+}
+  [(set_attr "type" "fmov")
+   (set_attr "mode" "DI")])
+
 (define_expand "atomic_compare_and_swap<mode>"
   [(match_operand:QI 0 "register_operand" "")		;; bool success output
    (match_operand:SWI124 1 "register_operand" "")	;; oldval output
Index: reg-stack.c
===================================================================
--- reg-stack.c	(revision 181804)
+++ reg-stack.c	(working copy)
@@ -434,7 +434,8 @@  get_true_reg (rtx *pat)
 	break;
 
       case UNSPEC:
-	if (XINT (*pat, 1) == UNSPEC_TRUNC_NOOP)
+	if (XINT (*pat, 1) == UNSPEC_TRUNC_NOOP
+	    || XINT (*pat, 1) == UNSPEC_LDA)
 	  pat = & XVECEXP (*pat, 0, 0);
 	return pat;
 
@@ -1677,6 +1678,7 @@  subst_stack_regs_pat (rtx insn, stack regstack, rt
 	  case UNSPEC:
 	    switch (XINT (pat_src, 1))
 	      {
+	      case UNSPEC_STA:
 	      case UNSPEC_FIST:
 
 	      case UNSPEC_FIST_FLOOR: