diff mbox

Scalar vector binary operation

Message ID AANLkTim1vizSgSsO9C37=8fvkTOL-wufGaRKwcF0ctGj@mail.gmail.com
State New
Headers show

Commit Message

Artem Shinkarov Nov. 18, 2010, 12:26 p.m. UTC
Fixed. New function description is written, test is covering the case
with integer to float conversion.

2010-11-18  Artjoms Sinkarovs <artyom.shinakroff@gmail.com>

   /gcc
   * c-typeck.c (scalar_to_vector): New function. Try scalar to
vector conversion.
   (stv_conv): New enum for scalar_to_vector return type.
   (build_binary_op): Adjust.
   * doc/extend.texi: Description of scalar to vector expansion.

   /gcc/c-family
   * c-common.c (unsafe_conversion_p): New function. Check if it is unsafe to
   convert an expression to the type.
   (conversion_warning): Adjust, use unsafe_conversion_p.
   * c-common.h (unsafe_conversion_p): New function declaration.

   /gcc/testsuite
   * gcc.c-torture/execute/scal-to-vec1.c: New test.
   * gcc.c-torture/execute/scal-to-vec2.c: New test.
   * gcc.c-torture/execute/scal-to-vec3.c: New test.
   * gcc.dg/scal-to-vec1.c: New test.

bootstrapped and tested on x86_64_unknown-linux



On Tue, Nov 16, 2010 at 4:39 PM, Joseph S. Myers
<joseph@codesourcery.com> wrote:
> On Mon, 15 Nov 2010, Artem Shinkarov wrote:
>
>> -/* Warns if the conversion of EXPR to TYPE may alter a value.
>> -   This is a helper function for warnings_for_convert_and_check.  */
>> -
>> -static void
>> -conversion_warning (tree type, tree expr)
>> +/* Return true if expression EXPR cannot be converted to the type TYPE
>> +   preserving its value. Funtion will produce warnings if PRODUCE_WARNS
>
> "Function"
>
>> +   is true.  */
>> +bool
>> +unsafe_conversion_p (tree type, tree expr, bool produce_warns)
>
> Are you sure the comment accurately describes the semantics?  The
> impression I get is that the new function is deliberately more restricted
> in the expressions it takes and the intelligence it applies to them than
> the old one - so the comment should say so (the point of the function
> being to give warnings according to some well-defined semantics and *not*
> to be smart in ways that may change unpredictably; the comment should make
> the semantics clear) - and that some cases may not return true even when
> you give a warning if produce_warns.
>
>> @@ -1917,11 +1879,17 @@ conversion_warning (tree type, tree expr
>>          {
>>            if (TYPE_UNSIGNED (type) && !TYPE_UNSIGNED (expr_type)
>>             && tree_int_cst_sgn (expr) < 0)
>> -         warning_at (loc, OPT_Wsign_conversion, "negative integer"
>> -                     " implicitly converted to unsigned type");
>> +            {
>> +              if (produce_warns)
>> +             warning_at (loc, OPT_Wsign_conversion, "negative integer"
>> +                         " implicitly converted to unsigned type");
>
> Here for example.  If this returns true, what logic causes it to do so?
> If not, why not?  (This sort of thing should best be made clear by
> comments in the code.)
>
>> +        else if (!integer_only_op
>> +                    /* Allow integer --> real conversion if safe.  */
>> +                 && (TREE_CODE (type0) == REAL_TYPE
>> +                     || TREE_CODE (type0) == INTEGER_TYPE)
>> +                 && SCALAR_FLOAT_TYPE_P (TREE_TYPE (type1)))
>> +          {
>> +            if (unsafe_conversion_p (TREE_TYPE (type1), op0, false))
>> +              {
>> +                error_at (loc, "truncating floating point constant to "
>> +                               "vector precision does not preserve value");
>
> "floating-point" when used as an adjective.
>
> If you have an int constant that cannot be exactly converted to float,
> what error do you get for converting it to a float vector?  This one
> (which would be inappropriate since it's not a floating-point constant),
> or another one?  And is there a testcase for this?
>
> --
> Joseph S. Myers
> joseph@codesourcery.com
>

Comments

Joseph Myers Nov. 19, 2010, 9:59 p.m. UTC | #1
On Thu, 18 Nov 2010, Artem Shinkarov wrote:

> Fixed. New function description is written, test is covering the case
> with integer to float conversion.

I do not see a testcase here that covers the case of converting an integer 
constant, not exactly representable in float, to a float vector.
diff mbox

Patch

Index: gcc/doc/extend.texi
===================================================================
--- gcc/doc/extend.texi	(revision 166433)
+++ gcc/doc/extend.texi	(working copy)
@@ -6333,18 +6333,25 @@  In C it is possible to use shifting oper
 integer-type vectors. The operation is defined as following: @code{@{a0,
 a1, @dots{}, an@} >> @{b0, b1, @dots{}, bn@} == @{a0 >> b0, a1 >> b1,
 @dots{}, an >> bn@}}@. Vector operands must have the same number of
-elements.  Additionally second operands can be a scalar integer in which
-case the scalar is converted to the type used by the vector operand (with
-possible truncation) and each element of this new vector is the scalar's
-value.
+elements. 
+
+For the convenience in C it is allowed to use a binary vector operation
+where one operand is a scalar. In that case the compiler will transform
+the scalar operand into a vector where each element is the scalar from
+the operation. The transformation will happen only if the scalar could be
+safely converted to the vector-element type.
 Consider the following code.
 
 @smallexample
 typedef int v4si __attribute__ ((vector_size (16)));
 
-v4si a, b;
+v4si a, b, c;
+long l;
+
+a = b + 1;    /* a = b + @{1,1,1,1@}; */
+a = 2 * b;    /* a = @{2,2,2,2@} * b; */
 
-b = a >> 1;     /* b = a >> @{1,1,1,1@}; */
+a = l + a;    /* Error, cannot convert long to int. */
 @end smallexample
 
 In C vectors can be subscripted as if the vector were an array with
Index: gcc/c-family/c-common.c
===================================================================
--- gcc/c-family/c-common.c	(revision 166433)
+++ gcc/c-family/c-common.c	(working copy)
@@ -1852,56 +1852,26 @@  tree shorten_binary_op (tree result_type
   return result_type;
 }
 
-/* Warns if the conversion of EXPR to TYPE may alter a value.
-   This is a helper function for warnings_for_convert_and_check.  */
-
-static void
-conversion_warning (tree type, tree expr)
+/* Checks if expression EXPR of real/integer type cannot be converted 
+   to the real/integer type TYPE. Function returns true when:
+        * EXPR is a constant which cannot be exactly converted to TYPE EXPR
+        * is not a constant and size of EXPR's type > than size of TYPE, 
+          for EXPR type and TYPE being both integers or both real.
+        * EXPR is not a constant of real type and TYPE is an integer.  EXPR
+        * is not a constant of integer type which cannot be 
+          exactly converted to real type.  
+   Function allows conversions between types of different signedness and
+   does not return true in that case.  Function can produce signedness
+   warnings if PRODUCE_WARNS is true.  */
+bool
+unsafe_conversion_p (tree type, tree expr, bool produce_warns)
 {
   bool give_warning = false;
-
-  int i;
-  const int expr_num_operands = TREE_OPERAND_LENGTH (expr);
   tree expr_type = TREE_TYPE (expr);
   location_t loc = EXPR_LOC_OR_HERE (expr);
 
-  if (!warn_conversion && !warn_sign_conversion)
-    return;
-
-  /* If any operand is artificial, then this expression was generated
-     by the compiler and we do not warn.  */
-  for (i = 0; i < expr_num_operands; i++)
+  if (TREE_CODE (expr) == REAL_CST || TREE_CODE (expr) == INTEGER_CST)
     {
-      tree op = TREE_OPERAND (expr, i);
-      if (op && DECL_P (op) && DECL_ARTIFICIAL (op))
-	return;
-    }
-
-  switch (TREE_CODE (expr))
-    {
-    case EQ_EXPR:
-    case NE_EXPR:
-    case LE_EXPR:
-    case GE_EXPR:
-    case LT_EXPR:
-    case GT_EXPR:
-    case TRUTH_ANDIF_EXPR:
-    case TRUTH_ORIF_EXPR:
-    case TRUTH_AND_EXPR:
-    case TRUTH_OR_EXPR:
-    case TRUTH_XOR_EXPR:
-    case TRUTH_NOT_EXPR:
-      /* Conversion from boolean to a signed:1 bit-field (which only
-	 can hold the values 0 and -1) doesn't lose information - but
-	 it does change the value.  */
-      if (TYPE_PRECISION (type) == 1 && !TYPE_UNSIGNED (type))
-	warning_at (loc, OPT_Wconversion,
-		    "conversion to %qT from boolean expression", type);
-      return;
-
-    case REAL_CST:
-    case INTEGER_CST:
-
       /* Warn for real constant that is not an exact integer converted
          to integer type.  */
       if (TREE_CODE (expr_type) == REAL_TYPE
@@ -1917,11 +1887,17 @@  conversion_warning (tree type, tree expr
         {
           if (TYPE_UNSIGNED (type) && !TYPE_UNSIGNED (expr_type)
 	      && tree_int_cst_sgn (expr) < 0)
-	    warning_at (loc, OPT_Wsign_conversion, "negative integer"
-			" implicitly converted to unsigned type");
+            {
+              if (produce_warns)
+	        warning_at (loc, OPT_Wsign_conversion, "negative integer"
+		            " implicitly converted to unsigned type");
+            }
           else if (!TYPE_UNSIGNED (type) && TYPE_UNSIGNED (expr_type))
-	    warning_at (loc, OPT_Wsign_conversion, "conversion of unsigned"
-			" constant value to negative integer");
+            {
+              if (produce_warns)
+	        warning_at (loc, OPT_Wsign_conversion, "conversion of unsigned"
+			    " constant value to negative integer");
+            }
 	  else
 	    give_warning = true;
         }
@@ -1944,36 +1920,9 @@  conversion_warning (tree type, tree expr
                 give_warning = true;
             }
         }
-
-      if (give_warning)
-        warning_at (loc, OPT_Wconversion,
-		    "conversion to %qT alters %qT constant value",
-		    type, expr_type);
-
-      return;
-
-    case COND_EXPR:
-      {
-	/* In case of COND_EXPR, if both operands are constants or
-	   COND_EXPR, then we do not care about the type of COND_EXPR,
-	   only about the conversion of each operand.  */
-	tree op1 = TREE_OPERAND (expr, 1);
-	tree op2 = TREE_OPERAND (expr, 2);
-
-	if ((TREE_CODE (op1) == REAL_CST || TREE_CODE (op1) == INTEGER_CST
-	     || TREE_CODE (op1) == COND_EXPR)
-	    && (TREE_CODE (op2) == REAL_CST || TREE_CODE (op2) == INTEGER_CST
-		|| TREE_CODE (op2) == COND_EXPR))
-	  {
-	    conversion_warning (type, op1);
-	    conversion_warning (type, op2);
-	    return;
-	  }
-	/* Fall through.  */
-      }
-
-    default: /* 'expr' is not a constant.  */
-
+    }
+  else
+    {
       /* Warn for real types converted to integer types.  */
       if (TREE_CODE (expr_type) == REAL_TYPE
           && TREE_CODE (type) == INTEGER_TYPE)
@@ -1988,7 +1937,7 @@  conversion_warning (tree type, tree expr
 
 	  /* Don't warn for short y; short x = ((int)y & 0xff);  */
 	  if (TREE_CODE (expr) == BIT_AND_EXPR
-		|| TREE_CODE (expr) == BIT_IOR_EXPR
+	      || TREE_CODE (expr) == BIT_IOR_EXPR
 	      || TREE_CODE (expr) == BIT_XOR_EXPR)
 	    {
 	      /* If both args were extended from a shortest type,
@@ -2015,7 +1964,7 @@  conversion_warning (tree type, tree expr
 			  && int_fits_type_p (op1, c_common_signed_type (type))
 			  && int_fits_type_p (op1,
 					      c_common_unsigned_type (type))))
-		    return;
+		    return false;
 		  /* If constant is unsigned and fits in the target
 		     type, then the result will also fit.  */
 		  else if ((TREE_CODE (op0) == INTEGER_CST
@@ -2024,7 +1973,7 @@  conversion_warning (tree type, tree expr
 			   || (TREE_CODE (op1) == INTEGER_CST
 			       && unsigned1
 			       && int_fits_type_p (op1, type)))
-		    return;
+		    return false;
 		}
 	    }
           /* Warn for integer types converted to smaller integer types.  */
@@ -2033,12 +1982,13 @@  conversion_warning (tree type, tree expr
 
 	  /* When they are the same width but different signedness,
 	     then the value may change.  */
-	  else if ((TYPE_PRECISION (type) == TYPE_PRECISION (expr_type)
+	  else if (((TYPE_PRECISION (type) == TYPE_PRECISION (expr_type)
 		    && TYPE_UNSIGNED (expr_type) != TYPE_UNSIGNED (type))
 		   /* Even when converted to a bigger type, if the type is
 		      unsigned but expr is signed, then negative values
 		      will be changed.  */
-		   || (TYPE_UNSIGNED (type) && !TYPE_UNSIGNED (expr_type)))
+		    || (TYPE_UNSIGNED (type) && !TYPE_UNSIGNED (expr_type)))
+                   && produce_warns)
 	    warning_at (loc, OPT_Wsign_conversion, "conversion to %qT from %qT "
 			"may change the sign of the result",
 			type, expr_type);
@@ -2072,9 +2022,86 @@  conversion_warning (tree type, tree expr
                && TREE_CODE (type) == REAL_TYPE
                && TYPE_PRECISION (type) < TYPE_PRECISION (expr_type))
         give_warning = true;
+    }
+
+  return give_warning;
+}
+
+/* Warns if the conversion of EXPR to TYPE may alter a value.
+   This is a helper function for warnings_for_convert_and_check.  */
+
+static void
+conversion_warning (tree type, tree expr)
+{
+  int i;
+  const int expr_num_operands = TREE_OPERAND_LENGTH (expr);
+  tree expr_type = TREE_TYPE (expr);
+  location_t loc = EXPR_LOC_OR_HERE (expr);
+
+  if (!warn_conversion && !warn_sign_conversion)
+    return;
+
+  /* If any operand is artificial, then this expression was generated
+     by the compiler and we do not warn.  */
+  for (i = 0; i < expr_num_operands; i++)
+    {
+      tree op = TREE_OPERAND (expr, i);
+      if (op && DECL_P (op) && DECL_ARTIFICIAL (op))
+	return;
+    }
+
+  switch (TREE_CODE (expr))
+    {
+    case EQ_EXPR:
+    case NE_EXPR:
+    case LE_EXPR:
+    case GE_EXPR:
+    case LT_EXPR:
+    case GT_EXPR:
+    case TRUTH_ANDIF_EXPR:
+    case TRUTH_ORIF_EXPR:
+    case TRUTH_AND_EXPR:
+    case TRUTH_OR_EXPR:
+    case TRUTH_XOR_EXPR:
+    case TRUTH_NOT_EXPR:
+      /* Conversion from boolean to a signed:1 bit-field (which only
+	 can hold the values 0 and -1) doesn't lose information - but
+	 it does change the value.  */
+      if (TYPE_PRECISION (type) == 1 && !TYPE_UNSIGNED (type))
+	warning_at (loc, OPT_Wconversion,
+		    "conversion to %qT from boolean expression", type);
+      return;
 
+    case REAL_CST:
+    case INTEGER_CST:
+      if (unsafe_conversion_p (type, expr, true))
+        warning_at (loc, OPT_Wconversion,
+		    "conversion to %qT alters %qT constant value",
+		    type, expr_type);
+      return;
 
-      if (give_warning)
+    case COND_EXPR:
+      {
+	/* In case of COND_EXPR, if both operands are constants or
+	   COND_EXPR, then we do not care about the type of COND_EXPR,
+	   only about the conversion of each operand.  */
+	tree op1 = TREE_OPERAND (expr, 1);
+	tree op2 = TREE_OPERAND (expr, 2);
+
+	if ((TREE_CODE (op1) == REAL_CST || TREE_CODE (op1) == INTEGER_CST
+	     || TREE_CODE (op1) == COND_EXPR)
+	    && (TREE_CODE (op2) == REAL_CST || TREE_CODE (op2) == INTEGER_CST
+		|| TREE_CODE (op2) == COND_EXPR))
+	  {
+	    conversion_warning (type, op1);
+	    conversion_warning (type, op2);
+	    return;
+	  }
+	/* Fall through.  */
+      }
+
+    default: /* 'expr' is not a constant.  */
+      if (unsafe_conversion_p (type, expr, true))
         warning_at (loc, OPT_Wconversion,
 		    "conversion to %qT from %qT may alter its value",
 		    type, expr_type);
Index: gcc/c-family/c-common.h
===================================================================
--- gcc/c-family/c-common.h	(revision 166433)
+++ gcc/c-family/c-common.h	(working copy)
@@ -706,6 +706,7 @@  extern tree c_common_unsigned_type (tree
 extern tree c_common_signed_type (tree);
 extern tree c_common_signed_or_unsigned_type (int, tree);
 extern tree c_build_bitfield_integer_type (unsigned HOST_WIDE_INT, int);
+extern bool unsafe_conversion_p (tree, tree, bool);
 extern bool decl_with_nonnull_addr_p (const_tree);
 extern tree c_fully_fold (tree, bool, bool *);
 extern tree decl_constant_value_for_optimization (tree);
Index: gcc/testsuite/gcc.c-torture/execute/scal-to-vec1.c
===================================================================
--- gcc/testsuite/gcc.c-torture/execute/scal-to-vec1.c	(revision 0)
+++ gcc/testsuite/gcc.c-torture/execute/scal-to-vec1.c	(revision 0)
@@ -0,0 +1,85 @@ 
+#define vector(elcount, type)  \
+__attribute__((vector_size((elcount)*sizeof(type)))) type
+
+#define vidx(type, vec, idx) (*((type *) &(vec) + idx))
+
+#define operl(a, b, op) (a op b)
+#define operr(a, b, op) (b op a)
+
+#define check(type, count, vec0, vec1, num, op, lr) \
+do {\
+    int __i; \
+    for (__i = 0; __i < count; __i++) {\
+        if (vidx (type, vec1, __i) != oper##lr (num, vidx (type, vec0, __i), op)) \
+            __builtin_abort (); \
+    }\
+} while (0)
+
+#define veccompare(type, count, v0, v1) \
+do {\
+    int __i; \
+    for (__i = 0; __i < count; __i++) { \
+        if (vidx (type, v0, __i) != vidx (type, v1, __i)) \
+            __builtin_abort (); \
+    } \
+} while (0)
+
+
+int main (int argc, char *argv[]) {
+#define fvec_2 (vector(4, float)){2., 2., 2., 2.}
+#define dvec_2 (vector(2, double)){2., 2.}
+
+
+    vector(8, short) v0 = {argc, 1,2,3,4,5,6,7};
+    vector(8, short) v1;
+
+    vector(4, float) f0 = {1., 2., 3., 4.};
+    vector(4, float) f1, f2;
+
+    vector(2, double) d0 = {1., 2.};
+    vector(2, double) d1, d2;
+
+
+
+    v1 = 2 + v0;   check (short, 8, v0, v1, 2, +, l);
+    v1 = 2 - v0;   check (short, 8, v0, v1, 2, -, l);
+    v1 = 2 * v0;   check (short, 8, v0, v1, 2, *, l);
+    v1 = 2 / v0;   check (short, 8, v0, v1, 2, /, l);
+    v1 = 2 % v0;   check (short, 8, v0, v1, 2, %, l);
+    v1 = 2 ^ v0;   check (short, 8, v0, v1, 2, ^, l);
+    v1 = 2 & v0;   check (short, 8, v0, v1, 2, &, l);
+    v1 = 2 | v0;   check (short, 8, v0, v1, 2, |, l);
+    v1 = 2 << v0;   check (short, 8, v0, v1, 2, <<, l);
+    v1 = 2 >> v0;   check (short, 8, v0, v1, 2, >>, l);
+
+    v1 = v0 + 2;   check (short, 8, v0, v1, 2, +, r);
+    v1 = v0 - 2;   check (short, 8, v0, v1, 2, -, r);
+    v1 = v0 * 2;   check (short, 8, v0, v1, 2, *, r);
+    v1 = v0 / 2;   check (short, 8, v0, v1, 2, /, r);
+    v1 = v0 % 2;   check (short, 8, v0, v1, 2, %, r);
+    v1 = v0 ^ 2;   check (short, 8, v0, v1, 2, ^, r);
+    v1 = v0 & 2;   check (short, 8, v0, v1, 2, &, r);
+    v1 = v0 | 2;   check (short, 8, v0, v1, 2, |, r);
+
+    f1 = 2. + f0;  f2 = fvec_2 + f0; veccompare (float, 4, f1, f2);
+    f1 = 2. - f0;  f2 = fvec_2 - f0; veccompare (float, 4, f1, f2);
+    f1 = 2. * f0;  f2 = fvec_2 * f0; veccompare (float, 4, f1, f2);
+    f1 = 2. / f0;  f2 = fvec_2 / f0; veccompare (float, 4, f1, f2);
+
+    f1 = f0 + 2.;  f2 = f0 + fvec_2; veccompare (float, 4, f1, f2);
+    f1 = f0 - 2.;  f2 = f0 - fvec_2; veccompare (float, 4, f1, f2);
+    f1 = f0 * 2.;  f2 = f0 * fvec_2; veccompare (float, 4, f1, f2);
+    f1 = f0 / 2.;  f2 = f0 / fvec_2; veccompare (float, 4, f1, f2);
+
+    d1 = 2. + d0;  d2 = dvec_2 + d0; veccompare (double, 2, d1, d2);
+    d1 = 2. - d0;  d2 = dvec_2 - d0; veccompare (double, 2, d1, d2);
+    d1 = 2. * d0;  d2 = dvec_2 * d0; veccompare (double, 2, d1, d2);
+    d1 = 2. / d0;  d2 = dvec_2 / d0; veccompare (double, 2, d1, d2);
+
+    d1 = d0 + 2.;  d2 = d0 + dvec_2; veccompare (double, 2, d1, d2);
+    d1 = d0 - 2.;  d2 = d0 - dvec_2; veccompare (double, 2, d1, d2);
+    d1 = d0 * 2.;  d2 = d0 * dvec_2; veccompare (double, 2, d1, d2);
+    d1 = d0 / 2.;  d2 = d0 / dvec_2; veccompare (double, 2, d1, d2);
+
+    return 0;
+}
Index: gcc/testsuite/gcc.c-torture/execute/scal-to-vec3.c
===================================================================
--- gcc/testsuite/gcc.c-torture/execute/scal-to-vec3.c	(revision 0)
+++ gcc/testsuite/gcc.c-torture/execute/scal-to-vec3.c	(revision 0)
@@ -0,0 +1,48 @@ 
+#define vector(elcount, type)  \
+__attribute__((vector_size((elcount)*sizeof(type)))) type
+
+#define vidx(type, vec, idx) (*((type *) &(vec) + idx))
+
+#define veccompare(type, count, v0, v1) \
+do {\
+    int __i; \
+    for (__i = 0; __i < count; __i++) { \
+        if (vidx (type, v0, __i) != vidx (type, v1, __i)) \
+            __builtin_abort (); \
+    } \
+} while (0)
+
+
+int main (int argc, char *argv[]) {
+#define fvec_2 (vector(4, float)){2., 2., 2., 2.}
+#define dvec_2 (vector(2, double)){2., 2.}
+
+    vector(4, float) f0 = {1., 2., 3., 4.};
+    vector(4, float) f1, f2;
+
+    vector(2, double) d0 = {1., 2.};
+    vector(2, double) d1, d2;
+
+
+    f1 = 2 + f0;  f2 = fvec_2 + f0; veccompare (float, 4, f1, f2);
+    f1 = 2 - f0;  f2 = fvec_2 - f0; veccompare (float, 4, f1, f2);
+    f1 = 2 * f0;  f2 = fvec_2 * f0; veccompare (float, 4, f1, f2);
+    f1 = 2 / f0;  f2 = fvec_2 / f0; veccompare (float, 4, f1, f2);
+
+    f1 = f0 + 2;  f2 = f0 + fvec_2; veccompare (float, 4, f1, f2);
+    f1 = f0 - 2;  f2 = f0 - fvec_2; veccompare (float, 4, f1, f2);
+    f1 = f0 * 2;  f2 = f0 * fvec_2; veccompare (float, 4, f1, f2);
+    f1 = f0 / 2;  f2 = f0 / fvec_2; veccompare (float, 4, f1, f2);
+
+    d1 = 2 + d0;  d2 = dvec_2 + d0; veccompare (double, 2, d1, d2);
+    d1 = 2 - d0;  d2 = dvec_2 - d0; veccompare (double, 2, d1, d2);
+    d1 = 2 * d0;  d2 = dvec_2 * d0; veccompare (double, 2, d1, d2);
+    d1 = 2 / d0;  d2 = dvec_2 / d0; veccompare (double, 2, d1, d2);
+
+    d1 = d0 + 2;  d2 = d0 + dvec_2; veccompare (double, 2, d1, d2);
+    d1 = d0 - 2;  d2 = d0 - dvec_2; veccompare (double, 2, d1, d2);
+    d1 = d0 * 2;  d2 = d0 * dvec_2; veccompare (double, 2, d1, d2);
+    d1 = d0 / 2;  d2 = d0 / dvec_2; veccompare (double, 2, d1, d2);
+
+    return 0;
+}
Index: gcc/testsuite/gcc.c-torture/execute/scal-to-vec2.c
===================================================================
--- gcc/testsuite/gcc.c-torture/execute/scal-to-vec2.c	(revision 0)
+++ gcc/testsuite/gcc.c-torture/execute/scal-to-vec2.c	(revision 0)
@@ -0,0 +1,62 @@ 
+#define vector(elcount, type)  \
+__attribute__((vector_size((elcount)*sizeof(type)))) type
+
+#define vidx(type, vec, idx) (*((type *) &(vec) + idx))
+
+#define operl(a, b, op) (a op b)
+#define operr(a, b, op) (b op a)
+
+#define check(type, count, vec0, vec1, num, op, lr) \
+do {\
+    int __i; \
+    for (__i = 0; __i < count; __i++) {\
+        if (vidx (type, vec1, __i) != oper##lr (num, vidx (type, vec0, __i), op)) \
+            __builtin_abort (); \
+    }\
+} while (0)
+
+#define veccompare(type, count, v0, v1) \
+do {\
+    int __i; \
+    for (__i = 0; __i < count; __i++) { \
+        if (vidx (type, v0, __i) != vidx (type, v1, __i)) \
+            __builtin_abort (); \
+    } \
+} while (0)
+
+
+long __attribute__ ((noinline)) vlng () {   return (long)42; }
+int  __attribute__ ((noinline)) vint () {   return (int) 43; }
+short __attribute__ ((noinline)) vsrt () {   return (short)42; }
+char __attribute__ ((noinline)) vchr () {    return (char)42; }
+
+
+int main (int argc, char *argv[]) {
+    vector(16, char) c0 = {argc, 1,2,3,4,5,6,7, argc, 1,2,3,4,5,6,7};
+    vector(16, char) c1;
+    
+    vector(8, short) s0 = {argc, 1,2,3,4,5,6,7};
+    vector(8, short) s1;
+
+    vector(4, int) i0 = {argc, 1, 2, 3};
+    vector(4, int) i1;
+
+    vector(2, long) l0 = {argc, 1};
+    vector(2, long) l1;
+
+    c1 = vchr() + c0; check (char, 16, c0, c1, vchr(), +, l);
+    
+    s1 = vsrt() + s0; check (short, 8, s0, s1, vsrt(), +, l);
+    s1 = vchr() + s0; check (short, 8, s0, s1, vchr(), +, l);
+
+    i1 = vint() * i0; check (int, 4, i0, i1, vint(), *, l);
+    i1 = vsrt() * i0; check (int, 4, i0, i1, vsrt(), *, l);
+    i1 = vchr() * i0; check (int, 4, i0, i1, vchr(), *, l);
+
+    l1 = vlng() * l0; check (long, 2, l0, l1, vlng(), *, l);
+    l1 = vint() * l0; check (long, 2, l0, l1, vint(), *, l);
+    l1 = vsrt() * l0; check (long, 2, l0, l1, vsrt(), *, l);
+    l1 = vchr() * l0; check (long, 2, l0, l1, vchr(), *, l);
+
+    return 0;
+}
Index: gcc/testsuite/gcc.dg/scal-to-vec1.c
===================================================================
--- gcc/testsuite/gcc.dg/scal-to-vec1.c	(revision 0)
+++ gcc/testsuite/gcc.dg/scal-to-vec1.c	(revision 0)
@@ -0,0 +1,41 @@ 
+/* { dg-do compile } */
+/* { dg-options "-Wno-long-long" } */
+#define vector(elcount, type)  \
+__attribute__((vector_size((elcount)*sizeof(type)))) type
+
+#define vidx(type, vec, idx) (*((type *) &(vec) + idx))
+
+
+extern float sfl;
+extern int   sint;
+extern long long sll;
+
+int main (int argc, char *argv[]) {
+    vector(8, short) v0 = {argc, 1,2,3,4,5,6,7};
+    vector(8, short) v1;
+
+    vector(4, float) f0 = {1., 2., 3., 4.};
+    vector(4, float) f1, f2;
+
+    vector(4, int) i0 = {1,2,3,4};
+    vector(4, int) i1, i2;
+
+    
+    int     i = 12;
+    double  d = 3.;
+
+    v1 = i + v0;        /* { dg-error "conversion of scalar to vector" } */
+    v1 = 99999 + v0;    /* { dg-error "conversion of scalar to vector" } */
+
+    f1 = d + f0;        /* { dg-error "conversion of scalar to vector" } */
+    f1 = 1.3 + f0;      /* { dg-error "conversion of scalar to vector" } */
+    f1 = sll + f0;      /* { dg-error "conversion of scalar to vector" } */
+
+    /* convert.c should take care of this.  */
+    i1 = sfl + i0;      /* { dg-error "can't convert value to a vector" } */
+    i1 = 1.5 + i0;      /* { dg-error "can't convert value to a vector" } */
+    v1 = d + v0;        /* { dg-error "can't convert value to a vector" } */
+
+
+    return 0;
+}
Index: gcc/c-typeck.c
===================================================================
--- gcc/c-typeck.c	(revision 166433)
+++ gcc/c-typeck.c	(working copy)
@@ -51,6 +51,14 @@  enum impl_conv {
   ic_return
 };
 
+/* Possibe cases of scalar_to_vector conversion.  */
+enum stv_conv {
+  stv_error,        /* Error occured.  */
+  stv_nothing,      /* Nothing happened.  */
+  stv_firstarg,     /* First argument must be expanded.  */
+  stv_secondarg     /* Second argument must be expanded.  */
+};
+
 /* Whether we are building a boolean conversion inside
    convert_for_assignment, or some other late binary operation.  If
    build_binary_op is called (from code shared with C++) in this case,
@@ -9387,6 +9395,88 @@  push_cleanup (tree decl, tree cleanup, b
   TREE_OPERAND (stmt, 0) = list;
   STATEMENT_LIST_STMT_EXPR (list) = stmt_expr;
 }
+
+/* Convert scalar to vector for the range of operations.  */
+static enum stv_conv
+scalar_to_vector (location_t loc, enum tree_code code, tree op0, tree op1)
+{
+  tree type0 = TREE_TYPE (op0);
+  tree type1 = TREE_TYPE (op1);
+  bool integer_only_op = false;
+  enum stv_conv ret = stv_firstarg;
+  
+  gcc_assert (TREE_CODE (type0) == VECTOR_TYPE 
+              || TREE_CODE (type1) == VECTOR_TYPE);
+  switch (code)
+    {
+      case RSHIFT_EXPR:
+      case LSHIFT_EXPR:
+        if (TREE_CODE (type0) == INTEGER_TYPE
+            && TREE_CODE (TREE_TYPE (type1)) == INTEGER_TYPE)
+          {
+            if (unsafe_conversion_p (TREE_TYPE (type1), op0, false))
+              {
+                error_at (loc, "conversion of scalar to vector "
+                               "involves truncation");
+                return stv_error;
+              }
+            else
+              return stv_firstarg;
+          }
+        break;
+
+      case BIT_IOR_EXPR:
+      case BIT_XOR_EXPR:
+      case BIT_AND_EXPR:
+        integer_only_op = true;
+	/* ... fall through ...  */
+      
+      case PLUS_EXPR:
+      case MINUS_EXPR:
+      case MULT_EXPR:
+      case TRUNC_DIV_EXPR:
+      case TRUNC_MOD_EXPR:
+      case RDIV_EXPR:
+        if (TREE_CODE (type0) == VECTOR_TYPE)
+          {
+            tree tmp;
+            ret = stv_secondarg;
+            /* Swap TYPE0 with TYPE1 and OP0 with OP1  */
+            tmp = type0; type0 = type1; type1 = tmp;
+            tmp = op0; op0 = op1; op1 = tmp;
+          }
+
+        if (TREE_CODE (type0) == INTEGER_TYPE
+            && TREE_CODE (TREE_TYPE (type1)) == INTEGER_TYPE) 
+          {
+            if (unsafe_conversion_p (TREE_TYPE (type1), op0, false))
+              {
+                error_at (loc, "conversion of scalar to vector "
+                               "involves truncation");
+                return stv_error;
+              }
+            return ret;
+          }
+        else if (!integer_only_op
+                    /* Allow integer --> real conversion if safe.  */
+                 && (TREE_CODE (type0) == REAL_TYPE 
+                     || TREE_CODE (type0) == INTEGER_TYPE)
+                 && SCALAR_FLOAT_TYPE_P (TREE_TYPE (type1)))
+          {
+            if (unsafe_conversion_p (TREE_TYPE (type1), op0, false))
+              {
+                error_at (loc, "conversion of scalar to vector "
+                               "involves truncation");
+                return stv_error;
+              }
+            return ret;
+          }
+      default:
+        break;
+    }
+ 
+  return stv_nothing;
+}
 
 /* Build a binary-operation expression without default conversions.
    CODE is the kind of expression to build.
@@ -9498,7 +9588,10 @@  build_binary_op (location_t location, en
   else
     int_const = int_const_or_overflow = false;
 
-  if (convert_p)
+  /* Do not apply default conversion in mixed vector/scalar expression.  */
+  if (convert_p 
+      && !((TREE_CODE (TREE_TYPE (op0)) == VECTOR_TYPE) 
+           != (TREE_CODE (TREE_TYPE (op1)) == VECTOR_TYPE)))
     {
       op0 = default_conversion (op0);
       op1 = default_conversion (op1);
@@ -9570,6 +9663,41 @@  build_binary_op (location_t location, en
 
   objc_ok = objc_compare_types (type0, type1, -3, NULL_TREE);
 
+  /* In case when one of the operands of the binary operation is
+     a vector and another is a scalar -- convert scalar to vector.  */
+  if ((code0 == VECTOR_TYPE) != (code1 == VECTOR_TYPE))
+    {
+      enum stv_conv convert_flag = scalar_to_vector (location, code, op0, op1);
+      
+      switch (convert_flag)
+        {
+          case stv_error:
+            return error_mark_node;
+          case stv_firstarg:
+            {
+              tree sc = save_expr (op0);
+              sc = convert (TREE_TYPE (type1), sc);
+              op0 = build_vector_from_val (type1, sc);
+              orig_type0 = type0 = TREE_TYPE (op0);
+              code0 = TREE_CODE (type0);
+              converted = 1;
+              break;
+            }
+          case stv_secondarg:
+            {
+              tree sc = save_expr (op1);
+              sc = convert (TREE_TYPE (type0), sc);
+              op1 = build_vector_from_val (type0, sc);
+              orig_type1 = type1 = TREE_TYPE (op1);
+              code1 = TREE_CODE (type1);
+              converted = 1;
+              break;
+            }
+          default:
+            break;
+        }
+    }
+
   switch (code)
     {
     case PLUS_EXPR: