===================================================================
@@ -5288,6 +5288,62 @@ Convert unsigned integer operand 1 of mo
When overflows or underflows happen, the instruction saturates the
results to the maximum or the minimum.
+@cindex @code{extv@var{m}} instruction pattern
+@item @samp{extv@var{m}}
+Extract a bit-field from register operand 1, sign-extend it, and store
+it in operand 0. Operand 2 specifies the width of the field in bits
+and operand 3 the starting bit, which counts from the most significant
+bit if @samp{BITS_BIG_ENDIAN} is true and from the least significant bit
+otherwise.
+
+Operands 0 and 1 both have mode @var{m}. Operands 2 and 3 have a
+target-specific mode.
+
+@cindex @code{extvmisalign@var{m}} instruction pattern
+@item @samp{extvmisalign@var{m}}
+Extract a bit-field from memory operand 1, sign extend it, and store
+it in operand 0. Operand 2 specifies the width in bits and operand 3
+the starting bit. The starting bit is always somewhere in the first byte of
+operand 1; it counts from the most significant bit if @samp{BITS_BIG_ENDIAN}
+is true and from the least significant bit otherwise.
+
+Operand 0 has mode @var{m} while operand 1 has @code{BLK} mode.
+Operands 2 and 3 have a target-specific mode.
+
+The instruction must not read beyond the last byte of the bit-field.
+
+@cindex @code{extzv@var{m}} instruction pattern
+@item @samp{extzv@var{m}}
+Like @samp{extv@var{m}} except that the bit-field value is zero-extended.
+
+@cindex @code{extzvmisalign@var{m}} instruction pattern
+@item @samp{extzvmisalign@var{m}}
+Like @samp{extvmisalign@var{m}} except that the bit-field value is
+zero-extended.
+
+@cindex @code{insv@var{m}} instruction pattern
+@item @samp{insv@var{m}}
+Insert operand 3 into a bit-field of register operand 0. Operand 1
+specifies the width of the field in bits and operand 2 the starting bit,
+which counts from the most significant bit if @samp{BITS_BIG_ENDIAN}
+is true and from the least significant bit otherwise.
+
+Operands 0 and 3 both have mode @var{m}. Operands 1 and 2 have a
+target-specific mode.
+
+@cindex @code{insvmisalign@var{m}} instruction pattern
+@item @samp{insvmisalign@var{m}}
+Insert operand 3 into a bit-field of memory operand 0. Operand 1
+specifies the width of the field in bits and operand 2 the starting bit.
+The starting bit is always somewhere in the first byte of operand 0;
+it counts from the most significant bit if @samp{BITS_BIG_ENDIAN}
+is true and from the least significant bit otherwise.
+
+Operand 3 has mode @var{m} while operand 0 has @code{BLK} mode.
+Operands 1 and 2 have a target-specific mode.
+
+The instruction must not read or write beyond the last byte of the bit-field.
+
@cindex @code{extv} instruction pattern
@item @samp{extv}
Extract a bit-field from operand 1 (a register or memory operand), where
@@ -5303,10 +5359,16 @@ for operands 2 and 3 and the constant is
The bit-field value is sign-extended to a full word integer
before it is stored in operand 0.
+This pattern is deprecated; please use @samp{extv@var{m}} and
+@code{extvmisalign@var{m}} instead.
+
@cindex @code{extzv} instruction pattern
@item @samp{extzv}
Like @samp{extv} except that the bit-field value is zero-extended.
+This pattern is deprecated; please use @samp{extzv@var{m}} and
+@code{extzvmisalign@var{m}} instead.
+
@cindex @code{insv} instruction pattern
@item @samp{insv}
Store operand 3 (which must be valid for @code{word_mode}) into a
@@ -5318,6 +5380,9 @@ Operands 1 and 2 must be valid for @code
The RTL generation pass generates this instruction only with constants
for operands 1 and 2 and the constant is never zero for operand 1.
+This pattern is deprecated; please use @samp{insv@var{m}} and
+@code{insvmisalign@var{m}} instead.
+
@cindex @code{mov@var{mode}cc} instruction pattern
@item @samp{mov@var{mode}cc}
Conditionally move operand 2 or operand 3 into operand 0 according to the
===================================================================
@@ -171,6 +171,12 @@ OPTAB_DC(mov_optab, "mov$a", SET)
OPTAB_DC(movstrict_optab, "movstrict$a", STRICT_LOW_PART)
OPTAB_D (movmisalign_optab, "movmisalign$a")
OPTAB_D (storent_optab, "storent$a")
+OPTAB_D (insv_optab, "insv$a")
+OPTAB_D (extv_optab, "extv$a")
+OPTAB_D (extzv_optab, "extzv$a")
+OPTAB_D (insvmisalign_optab, "insvmisalign$a")
+OPTAB_D (extvmisalign_optab, "extvmisalign$a")
+OPTAB_D (extzvmisalign_optab, "extzvmisalign$a")
OPTAB_D (push_optab, "push$a1")
OPTAB_D (reload_in_optab, "reload_in$a")
OPTAB_D (reload_out_optab, "reload_out$a")
===================================================================
@@ -8296,6 +8296,35 @@ get_traditional_extraction_insn (extract
return true;
}
+/* Return true if an optab exists to perform an insertion or extraction
+ of type TYPE in mode MODE. Describe the instruction in *INSN if so.
+
+ REG_OPTAB is the optab to use for register structures and
+ MISALIGN_OPTAB is the optab to use for misaligned memory structures.
+ POS_OP is the operand number of the bit position. */
+
+static bool
+get_optab_extraction_insn (struct extraction_insn *insn,
+ enum extraction_type type,
+ enum machine_mode mode, direct_optab reg_optab,
+ direct_optab misalign_optab, int pos_op)
+{
+ direct_optab optab = (type == ET_unaligned_mem ? misalign_optab : reg_optab);
+ enum insn_code icode = direct_optab_handler (optab, mode);
+ if (icode == CODE_FOR_nothing)
+ return false;
+
+ const struct insn_data_d *data = &insn_data[icode];
+
+ insn->icode = icode;
+ insn->field_mode = mode;
+ insn->struct_mode = (type == ET_unaligned_mem ? BLKmode : mode);
+ insn->pos_mode = data->operand[pos_op].mode;
+ if (insn->pos_mode == VOIDmode)
+ insn->pos_mode = word_mode;
+ return true;
+}
+
/* Return true if an instruction exists to perform an insertion or
extraction (PATTERN says which) of type TYPE on a structure of mode MODE.
Describe the instruction in *INSN if so. */
@@ -8313,21 +8342,24 @@ get_extraction_insn (extraction_insn *in
&& get_traditional_extraction_insn (insn, type, mode,
CODE_FOR_insv, 0, 3))
return true;
- return false;
+ return get_optab_extraction_insn (insn, type, mode, insv_optab,
+ insvmisalign_optab, 2);
case EP_extv:
if (HAVE_extv
&& get_traditional_extraction_insn (insn, type, mode,
CODE_FOR_extv, 1, 0))
return true;
- return false;
+ return get_optab_extraction_insn (insn, type, mode, extv_optab,
+ extvmisalign_optab, 3);
case EP_extzv:
if (HAVE_extzv
&& get_traditional_extraction_insn (insn, type, mode,
CODE_FOR_extzv, 1, 0))
return true;
- return false;
+ return get_optab_extraction_insn (insn, type, mode, extzv_optab,
+ extzvmisalign_optab, 3);
default:
gcc_unreachable ();
===================================================================
@@ -3777,11 +3777,11 @@ (define_expand "fixuns_truncsfdi2"
;; Bit field extract patterns which use lwl/lwr or ldl/ldr.
-(define_expand "extv"
- [(set (match_operand 0 "register_operand")
- (sign_extract (match_operand 1 "nonimmediate_operand")
- (match_operand 2 "const_int_operand")
- (match_operand 3 "const_int_operand")))]
+(define_expand "extvmisalign<mode>"
+ [(set (match_operand:GPR 0 "register_operand")
+ (sign_extract:GPR (match_operand:BLK 1 "memory_operand")
+ (match_operand 2 "const_int_operand")
+ (match_operand 3 "const_int_operand")))]
"!TARGET_MIPS16"
{
if (mips_expand_ext_as_unaligned_load (operands[0], operands[1],
@@ -3789,22 +3789,22 @@ (define_expand "extv"
INTVAL (operands[3]),
/*unsigned=*/ false))
DONE;
- else if (register_operand (operands[1], GET_MODE (operands[0]))
- && ISA_HAS_EXTS && UINTVAL (operands[2]) <= 32)
- {
- if (GET_MODE (operands[0]) == DImode)
- emit_insn (gen_extvdi (operands[0], operands[1], operands[2],
- operands[3]));
- else
- emit_insn (gen_extvsi (operands[0], operands[1], operands[2],
- operands[3]));
- DONE;
- }
else
FAIL;
})
-(define_insn "extv<mode>"
+(define_expand "extv<mode>"
+ [(set (match_operand:GPR 0 "register_operand")
+ (sign_extract:GPR (match_operand:GPR 1 "register_operand")
+ (match_operand 2 "const_int_operand")
+ (match_operand 3 "const_int_operand")))]
+ "ISA_HAS_EXTS"
+{
+ if (UINTVAL (operands[2]) > 32)
+ FAIL;
+})
+
+(define_insn "*extv<mode>"
[(set (match_operand:GPR 0 "register_operand" "=d")
(sign_extract:GPR (match_operand:GPR 1 "register_operand" "d")
(match_operand 2 "const_int_operand" "")
@@ -3814,35 +3814,35 @@ (define_insn "extv<mode>"
[(set_attr "type" "arith")
(set_attr "mode" "<MODE>")])
-
-(define_expand "extzv"
- [(set (match_operand 0 "register_operand")
- (zero_extract (match_operand 1 "nonimmediate_operand")
- (match_operand 2 "const_int_operand")
- (match_operand 3 "const_int_operand")))]
+(define_expand "extzvmisalign<mode>"
+ [(set (match_operand:GPR 0 "register_operand")
+ (zero_extract:GPR (match_operand:BLK 1 "memory_operand")
+ (match_operand 2 "const_int_operand")
+ (match_operand 3 "const_int_operand")))]
"!TARGET_MIPS16"
{
if (mips_expand_ext_as_unaligned_load (operands[0], operands[1],
INTVAL (operands[2]),
INTVAL (operands[3]),
- /*unsigned=*/true))
+ /*unsigned=*/ true))
DONE;
- else if (mips_use_ins_ext_p (operands[1], INTVAL (operands[2]),
- INTVAL (operands[3])))
- {
- if (GET_MODE (operands[0]) == DImode)
- emit_insn (gen_extzvdi (operands[0], operands[1], operands[2],
- operands[3]));
- else
- emit_insn (gen_extzvsi (operands[0], operands[1], operands[2],
- operands[3]));
- DONE;
- }
else
FAIL;
})
-(define_insn "extzv<mode>"
+(define_expand "extzv<mode>"
+ [(set (match_operand:GPR 0 "register_operand")
+ (zero_extract:GPR (match_operand:GPR 1 "register_operand")
+ (match_operand 2 "const_int_operand")
+ (match_operand 3 "const_int_operand")))]
+ ""
+{
+ if (!mips_use_ins_ext_p (operands[1], INTVAL (operands[2]),
+ INTVAL (operands[3])))
+ FAIL;
+})
+
+(define_insn "*extzv<mode>"
[(set (match_operand:GPR 0 "register_operand" "=d")
(zero_extract:GPR (match_operand:GPR 1 "register_operand" "d")
(match_operand 2 "const_int_operand" "")
@@ -3865,36 +3865,37 @@ (define_insn "*extzv_truncsi_exts"
(set_attr "mode" "SI")])
-(define_expand "insv"
- [(set (zero_extract (match_operand 0 "nonimmediate_operand")
- (match_operand 1 "immediate_operand")
- (match_operand 2 "immediate_operand"))
- (match_operand 3 "reg_or_0_operand"))]
+(define_expand "insvmisalign<mode>"
+ [(set (zero_extract:GPR (match_operand:BLK 0 "memory_operand")
+ (match_operand 1 "const_int_operand")
+ (match_operand 2 "const_int_operand"))
+ (match_operand:GPR 3 "reg_or_0_operand"))]
"!TARGET_MIPS16"
{
if (mips_expand_ins_as_unaligned_store (operands[0], operands[3],
INTVAL (operands[1]),
INTVAL (operands[2])))
DONE;
- else if (mips_use_ins_ext_p (operands[0], INTVAL (operands[1]),
- INTVAL (operands[2])))
- {
- if (GET_MODE (operands[0]) == DImode)
- emit_insn (gen_insvdi (operands[0], operands[1], operands[2],
- operands[3]));
- else
- emit_insn (gen_insvsi (operands[0], operands[1], operands[2],
- operands[3]));
- DONE;
- }
- else
- FAIL;
+ else
+ FAIL;
+})
+
+(define_expand "insv<mode>"
+ [(set (zero_extract:GPR (match_operand:GPR 0 "register_operand")
+ (match_operand 1 "const_int_operand")
+ (match_operand 2 "const_int_operand"))
+ (match_operand:GPR 3 "reg_or_0_operand"))]
+ ""
+{
+ if (!mips_use_ins_ext_p (operands[0], INTVAL (operands[1]),
+ INTVAL (operands[2])))
+ FAIL;
})
-(define_insn "insv<mode>"
+(define_insn "*insv<mode>"
[(set (zero_extract:GPR (match_operand:GPR 0 "register_operand" "+d")
- (match_operand:SI 1 "immediate_operand" "I")
- (match_operand:SI 2 "immediate_operand" "I"))
+ (match_operand:SI 1 "const_int_operand" "")
+ (match_operand:SI 2 "const_int_operand" ""))
(match_operand:GPR 3 "reg_or_0_operand" "dJ"))]
"mips_use_ins_ext_p (operands[0], INTVAL (operands[1]),
INTVAL (operands[2]))"
===================================================================
@@ -7101,6 +7101,7 @@ mips_block_move_straight (rtx dest, rtx
else
{
rtx part = adjust_address (src, BLKmode, offset);
+ set_mem_size (part, delta);
if (!mips_expand_ext_as_unaligned_load (regs[i], part, bits, 0, 0))
gcc_unreachable ();
}
@@ -7113,6 +7114,7 @@ mips_block_move_straight (rtx dest, rtx
else
{
rtx part = adjust_address (dest, BLKmode, offset);
+ set_mem_size (part, delta);
if (!mips_expand_ins_as_unaligned_store (part, regs[i], bits, 0))
gcc_unreachable ();
}
@@ -7364,10 +7366,8 @@ mips_expand_atomic_qihi (union mips_gen_
}
/* Return true if it is possible to use left/right accesses for a
- bitfield of WIDTH bits starting BITPOS bits into *OP. When
- returning true, update *OP, *LEFT and *RIGHT as follows:
-
- *OP is a BLKmode reference to the whole field.
+ bitfield of WIDTH bits starting BITPOS bits into BLKmode memory OP.
+ When returning true, update *LEFT and *RIGHT as follows:
*LEFT is a QImode reference to the first byte if big endian or
the last byte if little endian. This address can be used in the
@@ -7377,16 +7377,11 @@ mips_expand_atomic_qihi (union mips_gen_
can be used in the patterning right-side instruction. */
static bool
-mips_get_unaligned_mem (rtx *op, HOST_WIDE_INT width, HOST_WIDE_INT bitpos,
+mips_get_unaligned_mem (rtx op, HOST_WIDE_INT width, HOST_WIDE_INT bitpos,
rtx *left, rtx *right)
{
rtx first, last;
- /* Check that the operand really is a MEM. Not all the extv and
- extzv predicates are checked. */
- if (!MEM_P (*op))
- return false;
-
/* Check that the size is valid. */
if (width != 32 && (!TARGET_64BIT || width != 64))
return false;
@@ -7399,20 +7394,12 @@ mips_get_unaligned_mem (rtx *op, HOST_WI
/* Reject aligned bitfields: we want to use a normal load or store
instead of a left/right pair. */
- if (MEM_ALIGN (*op) >= width)
+ if (MEM_ALIGN (op) >= width)
return false;
- /* Create a copy of *OP that refers to the whole field. This also has
- the effect of legitimizing *OP's address for BLKmode, possibly
- simplifying it. */
- *op = copy_rtx (adjust_address (*op, BLKmode, 0));
- set_mem_size (*op, width / BITS_PER_UNIT);
-
- /* Get references to both ends of the field. We deliberately don't
- use the original QImode *OP for FIRST since the new BLKmode one
- might have a simpler address. */
- first = adjust_address (*op, QImode, 0);
- last = adjust_address (*op, QImode, width / BITS_PER_UNIT - 1);
+ /* Get references to both ends of the field. */
+ first = adjust_address (op, QImode, 0);
+ last = adjust_address (op, QImode, width / BITS_PER_UNIT - 1);
/* Allocate to LEFT and RIGHT according to endianness. LEFT should
correspond to the MSB and RIGHT to the LSB. */
@@ -7440,14 +7427,6 @@ mips_expand_ext_as_unaligned_load (rtx d
rtx dest1 = NULL_RTX;
/* If TARGET_64BIT, the destination of a 32-bit "extz" or "extzv" will
- be a paradoxical word_mode subreg. This is the only case in which
- we allow the destination to be larger than the source. */
- if (GET_CODE (dest) == SUBREG
- && GET_MODE (dest) == DImode
- && GET_MODE (SUBREG_REG (dest)) == SImode)
- dest = SUBREG_REG (dest);
-
- /* If TARGET_64BIT, the destination of a 32-bit "extz" or "extzv" will
be a DImode, create a new temp and emit a zero extend at the end. */
if (GET_MODE (dest) == DImode
&& REG_P (dest)
@@ -7457,12 +7436,7 @@ mips_expand_ext_as_unaligned_load (rtx d
dest = gen_reg_rtx (SImode);
}
- /* After the above adjustment, the destination must be the same
- width as the source. */
- if (GET_MODE_BITSIZE (GET_MODE (dest)) != width)
- return false;
-
- if (!mips_get_unaligned_mem (&src, width, bitpos, &left, &right))
+ if (!mips_get_unaligned_mem (src, width, bitpos, &left, &right))
return false;
temp = gen_reg_rtx (GET_MODE (dest));
@@ -7504,7 +7478,7 @@ mips_expand_ins_as_unaligned_store (rtx
rtx left, right;
enum machine_mode mode;
- if (!mips_get_unaligned_mem (&dest, width, bitpos, &left, &right))
+ if (!mips_get_unaligned_mem (dest, width, bitpos, &left, &right))
return false;
mode = mode_for_size (width, MODE_INT, 0);
This patch adds the new optabs and makes MIPS use them. There are probably some clean-up opportunities in mips_use_ins_ext_p after this change, but I'll look at that separately. Tested as described in the covering note. OK to install? Richard gcc/ * doc/md.texi (extv@var{m}, extvmisalign@var{m}, extzv@var{m}) (extzvmisalign@var{m}, insv@var{m}, insvmisalign@var{m}): Document. (insv, extv, extzv): Deprecate. * optabs.def (insv_optab, extv_optab, extzv_optab) (insvmisalign_optab, extvmisalign_optab, extzvmisalign_optab): New optabs. * optabs.c (get_optab_extraction_insn): New function. (get_extraction_insn): Use it. * config/mips/mips.md (extv): Split into... (extvmisalign<mode>, extv<mode>): ...these new patterns. Rename existing extv<mode> pattern to... (*extv<mode>): ...this. (extzv): Split into... (extzvmisalign<mode>, extzv<mode>): ...these new patterns. Rename existing extzv<mode> pattern to... (*extzv<mode>): ...this. (insv): Split into... (insvmisalign<mode>, insv<mode>): ...these new patterns. Rename existing insv<mode> pattern to... (*insv<mode>): ...this. Use const_int_operand rather than immediate_operand. * config/mips/mips.c (mips_block_move_straight): Use set_mem_size to set the size of BLKmode accesses. (mips_get_unaligned_mem): Require OP0 to be a BLKmode memory, turning it from an "rtx *" to an rtx. (mips_expand_ext_as_unaligned_load): Simplify for new optab interface. Update call to mips_get_unaligned_mem. (mips_expand_ins_as_unaligned_store): Update call to mips_get_unaligned_mem.