diff mbox series

rs6000: Adjust rs6000_density_test for strided_load

Message ID 7b9f9bdf-1ed5-139b-de9c-511ee8454b85@linux.ibm.com
State New
Headers show
Series rs6000: Adjust rs6000_density_test for strided_load | expand

Commit Message

Kewen.Lin May 7, 2021, 2:29 a.m. UTC 
Hi,

We noticed that SPEC2017 503.bwaves_r run time degrades by about 8%
on P8 and P9 if we enabled vectorization at O2 fast-math.

Comparing to Ofast, compiler doesn't do the loop interchange on the
innermost loop, it's not profitable to vectorize it then.  Since
with loop vectorization, the loop becomes very intensive (density
ratio is 83), there are many scalar loads and further to construct
vector, it's bad that the vector CTORs have to wait for the required
loads are ready.

Now we have the function rs6000_density_test to check this kind of
intensive case, but for this case, the threshold is too generic and
a bit high.  This patch is to tweak the density heuristics by
introducing some more thresholds for strided_load, avoid to affect
some potential bmks sensitive to DENSITY_PCT_THRESHOLD change which
is generic.

Bootstrapped/regtested on powerpc64le-linux-gnu P9.

Nothing remarkable was observed with SPEC2017 Power9 full run,
excepting for bwaves_r degradation has been fixed.

Is it ok for trunk?

BR,
Kewen
------
gcc/ChangeLog:

	* config/rs6000/rs6000.c (rs6000_density_test): Add new heuristics
	for strided_load density check.
---
 gcc/config/rs6000/rs6000.c | 88 +++++++++++++++++++++++++++++++++-----
 1 file changed, 77 insertions(+), 11 deletions(-)
diff mbox series

Patch

diff --git a/gcc/config/rs6000/rs6000.c b/gcc/config/rs6000/rs6000.c
index ffdf10098a9..5ae40d6f4ce 100644
--- a/gcc/config/rs6000/rs6000.c
+++ b/gcc/config/rs6000/rs6000.c
@@ -5245,12 +5245,16 @@  rs6000_density_test (rs6000_cost_data *data)
   const int DENSITY_PCT_THRESHOLD = 85;
   const int DENSITY_SIZE_THRESHOLD = 70;
   const int DENSITY_PENALTY = 10;
+  const int DENSITY_LOAD_PCT_THRESHOLD = 80;
+  const int DENSITY_LOAD_FOR_CTOR_PCT_THRESHOLD = 65;
+  const int DENSITY_LOAD_SIZE_THRESHOLD = 20;
   struct loop *loop = data->loop_info;
   basic_block *bbs = get_loop_body (loop);
   int nbbs = loop->num_nodes;
   loop_vec_info loop_vinfo = loop_vec_info_for_loop (data->loop_info);
   int vec_cost = data->cost[vect_body], not_vec_cost = 0;
   int i, density_pct;
+  unsigned int nload_total = 0, nctor_for_strided = 0, nload_for_ctor = 0;
 
   /* Only care about cost of vector version, so exclude scalar version here.  */
   if (LOOP_VINFO_TARGET_COST_DATA (loop_vinfo) != (void *) data)
@@ -5272,21 +5276,83 @@  rs6000_density_test (rs6000_cost_data *data)
 	  if (!STMT_VINFO_RELEVANT_P (stmt_info)
 	      && !STMT_VINFO_IN_PATTERN_P (stmt_info))
 	    not_vec_cost++;
+	  else
+	    {
+	      stmt_vec_info vstmt_info = vect_stmt_to_vectorize (stmt_info);
+	      if (STMT_VINFO_DATA_REF (vstmt_info)
+		  && DR_IS_READ (STMT_VINFO_DATA_REF (vstmt_info)))
+		{
+		  if (STMT_VINFO_STRIDED_P (vstmt_info))
+		    {
+		      unsigned int ncopies = 1;
+		      unsigned int nunits = 1;
+		      /* TODO: For VMAT_STRIDED_SLP, the total CTOR can be
+			 fewer due to group access.  Simply handle it here
+			 for now.  */
+		      if (!STMT_SLP_TYPE (vstmt_info))
+			{
+			  tree vectype = STMT_VINFO_VECTYPE (vstmt_info);
+			  ncopies = vect_get_num_copies (loop_vinfo, vectype);
+			  nunits = vect_nunits_for_cost (vectype);
+			}
+		      unsigned int nloads = ncopies * nunits;
+		      nload_for_ctor += nloads;
+		      nload_total += nloads;
+		      nctor_for_strided += ncopies;
+		    }
+		  else
+		    nload_total++;
+		}
+	    }
 	}
     }
-
   free (bbs);
-  density_pct = (vec_cost * 100) / (vec_cost + not_vec_cost);
 
-  if (density_pct > DENSITY_PCT_THRESHOLD
-      && vec_cost + not_vec_cost > DENSITY_SIZE_THRESHOLD)
-    {
-      data->cost[vect_body] = vec_cost * (100 + DENSITY_PENALTY) / 100;
-      if (dump_enabled_p ())
-	dump_printf_loc (MSG_NOTE, vect_location,
-			 "density %d%%, cost %d exceeds threshold, penalizing "
-			 "loop body cost by %d%%", density_pct,
-			 vec_cost + not_vec_cost, DENSITY_PENALTY);
+  if (vec_cost + not_vec_cost > DENSITY_SIZE_THRESHOLD)
+    {
+      density_pct = (vec_cost * 100) / (vec_cost + not_vec_cost);
+      if (density_pct > DENSITY_PCT_THRESHOLD)
+	{
+	  data->cost[vect_body] = vec_cost * (100 + DENSITY_PENALTY) / 100;
+	  if (dump_enabled_p ())
+	    dump_printf_loc (MSG_NOTE, vect_location,
+			     "density %d%%, cost %d exceeds threshold, "
+			     "penalizing loop body cost by %d%%.\n",
+			     density_pct, vec_cost + not_vec_cost,
+			     DENSITY_PENALTY);
+	}
+      /* For one loop which has a large proportion scalar loads of all
+	 loads fed into vector construction, if the density is high,
+	 the loads will have more stalls than usual, further affect
+	 the vector construction.  One typical case is the innermost
+	 loop of the hotspot of spec2017 503.bwaves_r without loop
+	 interchange.  Here we price more on the related vector
+	 construction and penalize the body cost.  */
+      else if (density_pct > DENSITY_LOAD_PCT_THRESHOLD
+	       && nload_total > DENSITY_LOAD_SIZE_THRESHOLD)
+	{
+	  int load_for_ctor_pct = (nload_for_ctor * 100) / nload_total;
+	  /* Large proportion of scalar loads fed to vector CTOR.  */
+	  if (load_for_ctor_pct > DENSITY_LOAD_FOR_CTOR_PCT_THRESHOLD)
+	    {
+	      vec_cost += nctor_for_strided;
+	      if (dump_enabled_p ())
+		dump_printf_loc (MSG_NOTE, vect_location,
+				 "Found high density loop with a large "
+				 "proportion %d%% of scalar loads fed to "
+				 "vector ctor, add cost %d.\n",
+				 load_for_ctor_pct, nctor_for_strided);
+
+	      data->cost[vect_body] = vec_cost * (100 + DENSITY_PENALTY) / 100;
+	      if (dump_enabled_p ())
+		dump_printf_loc (MSG_NOTE, vect_location,
+				 "density %d%%, cost %d exceeds threshold, "
+				 "penalizing loop body cost by %d%% for "
+				 "load.\n",
+				 density_pct, vec_cost + not_vec_cost,
+				 DENSITY_PENALTY);
+	    }
+	}
     }
 }