===================================================================
@@ -362,8 +362,7 @@ lra_eliminate_regs_1 (rtx x, enum machin
offset = (update_p
? ep->offset - ep->previous_offset : ep->offset);
- if (mem_mode != 0
- && CONST_INT_P (XEXP (x, 1))
+ if (CONST_INT_P (XEXP (x, 1))
&& INTVAL (XEXP (x, 1)) == -offset)
return to;
else
@@ -378,9 +377,14 @@ lra_eliminate_regs_1 (rtx x, enum machin
}
/* If this is part of an address, we want to bring any constant
- to the outermost PLUS. We will do this by doing hard
+ to the outermost PLUS. We will do this by doing hard
register replacement in our operands and seeing if a constant
- shows up in one of them. */
+ shows up in one of them.
+
+ Note that there is no risk of modifying the structure of the
+ insn, since we only get called for its operands, thus we are
+ either modifying the address inside a MEM, or something like
+ an address operand of a load-address insn. */
{
rtx new0 = lra_eliminate_regs_1 (XEXP (x, 0), mem_mode,
@@ -388,18 +392,8 @@ lra_eliminate_regs_1 (rtx x, enum machin
rtx new1 = lra_eliminate_regs_1 (XEXP (x, 1), mem_mode,
subst_p, update_p, full_p);
- if (reg_renumber && (new0 != XEXP (x, 0) || new1 != XEXP (x, 1)))
- {
- new_rtx = form_sum (new0, new1);
-
- /* As above, if we are not inside a MEM we do not want to
- turn a PLUS into something else. We might try to do so here
- for an addition of 0 if we aren't optimizing. */
- if (! mem_mode && GET_CODE (new_rtx) != PLUS)
- return gen_rtx_PLUS (GET_MODE (x), new_rtx, const0_rtx);
- else
- return new_rtx;
- }
+ if (new0 != XEXP (x, 0) || new1 != XEXP (x, 1))
+ return form_sum (new0, new1);
}
return x;
@@ -543,31 +537,15 @@ lra_eliminate_regs_1 (rtx x, enum machin
return x;
case SUBREG:
- new_rtx = lra_eliminate_regs_1 (SUBREG_REG (x), mem_mode,
- subst_p, update_p, full_p);
+ new_rtx = lra_eliminate_regs_1 (SUBREG_REG (x), mem_mode,
+ subst_p, update_p, full_p);
if (new_rtx != SUBREG_REG (x))
{
int x_size = GET_MODE_SIZE (GET_MODE (x));
int new_size = GET_MODE_SIZE (GET_MODE (new_rtx));
- if (MEM_P (new_rtx)
- && ((x_size < new_size
-#ifdef WORD_REGISTER_OPERATIONS
- /* On these machines, combine can create RTL of the form
- (set (subreg:m1 (reg:m2 R) 0) ...)
- where m1 < m2, and expects something interesting to
- happen to the entire word. Moreover, it will use the
- (reg:m2 R) later, expecting all bits to be preserved.
- So if the number of words is the same, preserve the
- subreg so that LRA can see it. */
- && ! ((x_size - 1) / UNITS_PER_WORD
- == (new_size -1 ) / UNITS_PER_WORD)
-#endif
- )
- || x_size == new_size)
- )
-
+ if (MEM_P (new_rtx) && x_size <= new_size)
{
SUBREG_REG (x) = new_rtx;
alter_subreg (&x, false);
@@ -766,18 +744,18 @@ mark_not_eliminable (rtx x)
/* Scan INSN and eliminate all eliminable hard registers in it.
- If VALIDATE_P is true, do the replacement destructively. Also
+ If REPLACE_P is true, do the replacement destructively. Also
delete the insn as dead it if it is setting an eliminable register.
- If VALIDATE_P is false, just update the offsets while keeping the
+ If REPLACE_P is false, just update the offsets while keeping the
base register the same. */
static void
-eliminate_regs_in_insn (rtx insn, bool validate_p)
+eliminate_regs_in_insn (rtx insn, bool replace_p)
{
int icode = recog_memoized (insn);
rtx old_set = single_set (insn);
- bool val;
+ bool validate_p;
int i;
rtx substed_operand[MAX_RECOG_OPERANDS];
rtx orig_operand[MAX_RECOG_OPERANDS];
@@ -800,7 +778,7 @@ eliminate_regs_in_insn (rtx insn, bool v
if (old_set != 0 && REG_P (SET_DEST (old_set))
&& (ep = get_elimination (SET_DEST (old_set))) != NULL)
{
- bool delete_p = validate_p;
+ bool delete_p = replace_p;
#ifdef HARD_FRAME_POINTER_REGNUM
/* If this is setting the frame pointer register to the hardware
@@ -811,7 +789,7 @@ eliminate_regs_in_insn (rtx insn, bool v
if (ep->from == FRAME_POINTER_REGNUM
&& ep->to == HARD_FRAME_POINTER_REGNUM)
{
- if (validate_p)
+ if (replace_p)
{
SET_DEST (old_set) = ep->to_rtx;
lra_update_insn_recog_data (insn);
@@ -915,9 +893,9 @@ eliminate_regs_in_insn (rtx insn, bool v
if (REG_P (reg) && (ep = get_elimination (reg)) != NULL)
{
- rtx to_rtx = validate_p ? ep->to_rtx : ep->from_rtx;
+ rtx to_rtx = replace_p ? ep->to_rtx : ep->from_rtx;
- if (! validate_p)
+ if (! replace_p)
{
offset += (ep->offset - ep->previous_offset);
offset = trunc_int_for_mode (offset, GET_MODE (plus_cst_src));
@@ -963,7 +941,7 @@ eliminate_regs_in_insn (rtx insn, bool v
can be handled by the constraint pass. */
id = lra_get_insn_recog_data (insn);
static_id = id->insn_static_data;
- val = false;
+ validate_p = false;
for (i = 0; i < static_id->n_operands; i++)
{
orig_operand[i] = *id->operand_loc[i];
@@ -992,17 +970,9 @@ eliminate_regs_in_insn (rtx insn, bool v
invariants as the source of a plain move. */
substed_operand[i]
= lra_eliminate_regs_1 (*id->operand_loc[i], VOIDmode,
- validate_p, ! validate_p, false);
+ replace_p, ! replace_p, false);
if (substed_operand[i] != orig_operand[i])
- val = true;
-
- /* If an output operand changed from a REG to a MEM and INSN is an
- insn, write a CLOBBER insn. */
- if (static_id->operand[i].type != OP_IN
- && REG_P (orig_operand[i])
- && MEM_P (substed_operand[i])
- && validate_p)
- emit_insn_after (gen_clobber (orig_operand[i]), insn);
+ validate_p = true;
}
}
@@ -1013,7 +983,7 @@ eliminate_regs_in_insn (rtx insn, bool v
for (i = 0; i < static_id->n_dups; i++)
*id->dup_loc[i] = substed_operand[(int) static_id->dup_num[i]];
- if (val)
+ if (validate_p)
{
/* If we had a move insn but now we don't, re-recognize it.
This will cause spurious re-recognition if the old move had a
The following patch is formed from latest discussion with Richard Sandiford. The patch was successfully bootstrapped on x86/x86-64 and ppc64. Committed as rev. 192287. 012-10-09 Vladimir Makarov <vmakarov@redhat.com> * lra-eliminations.c (lra_eliminate_regs_1): Remove mem_mode check. Remove form_sum check. Remove code in #ifdef WORD_REGISTER_OPERATIONS. (eliminate_regs_in_insn): Rename argument validate_p to replace_p. Rename val to validate_p. Remove clobber generation.