@@ -1483,7 +1483,7 @@ xtensa_expand_block_set_unrolled_loop (rtx *operands)
int
xtensa_expand_block_set_small_loop (rtx *operands)
{
- HOST_WIDE_INT bytes, value, align;
+ HOST_WIDE_INT bytes, value, align, count;
int expand_len, funccall_len;
rtx x, dst, end, reg;
machine_mode unit_mode;
@@ -1503,17 +1503,25 @@ xtensa_expand_block_set_small_loop (rtx *operands)
/* Totally-aligned block only. */
if (bytes % align != 0)
return 0;
+ count = bytes / align;
- /* If 4-byte aligned, small loop substitution is almost optimal, thus
- limited to only offset to the end address for ADDI/ADDMI instruction. */
- if (align == 4
- && ! (bytes <= 127 || (bytes <= 32512 && bytes % 256 == 0)))
- return 0;
+ /* If the Loop Option (zero-overhead looping) is configured and active,
+ almost no restrictions about the length of the block. */
+ if (! (TARGET_LOOPS && optimize))
+ {
+ /* If 4-byte aligned, small loop substitution is almost optimal,
+ thus limited to only offset to the end address for ADDI/ADDMI
+ instruction. */
+ if (align == 4
+ && ! (bytes <= 127 || (bytes <= 32512 && bytes % 256 == 0)))
+ return 0;
- /* If no 4-byte aligned, loop count should be treated as the constraint. */
- if (align != 4
- && bytes / align > ((optimize > 1 && !optimize_size) ? 8 : 15))
- return 0;
+ /* If no 4-byte aligned, loop count should be treated as the
+ constraint. */
+ if (align != 4
+ && count > ((optimize > 1 && !optimize_size) ? 8 : 15))
+ return 0;
+ }
/* Insn expansion: holding the init value.
Either MOV(.N) or L32R w/litpool. */
@@ -1523,16 +1531,33 @@ xtensa_expand_block_set_small_loop (rtx *operands)
expand_len = TARGET_DENSITY ? 2 : 3;
else
expand_len = 3 + 4;
- /* Insn expansion: Either ADDI(.N) or ADDMI for the end address. */
- expand_len += bytes > 127 ? 3
- : (TARGET_DENSITY && bytes <= 15) ? 2 : 3;
-
- /* Insn expansion: the loop body and branch instruction.
- For store, one of S8I, S16I or S32I(.N).
- For advance, ADDI(.N).
- For branch, BNE. */
- expand_len += (TARGET_DENSITY && align == 4 ? 2 : 3)
- + (TARGET_DENSITY ? 2 : 3) + 3;
+ if (TARGET_LOOPS && optimize) /* zero-overhead looping */
+ {
+ /* Insn translation: Either MOV(.N) or L32R w/litpool for the
+ loop count. */
+ expand_len += xtensa_simm12b (count) ? xtensa_sizeof_MOVI (count)
+ : 3 + 4;
+ /* Insn translation: LOOP, the zero-overhead looping setup
+ instruction. */
+ expand_len += 3;
+ /* Insn expansion: the loop body instructions.
+ For store, one of S8I, S16I or S32I(.N).
+ For advance, ADDI(.N). */
+ expand_len += (TARGET_DENSITY && align == 4 ? 2 : 3)
+ + (TARGET_DENSITY ? 2 : 3);
+ }
+ else /* NO zero-overhead looping */
+ {
+ /* Insn expansion: Either ADDI(.N) or ADDMI for the end address. */
+ expand_len += bytes > 127 ? 3
+ : (TARGET_DENSITY && bytes <= 15) ? 2 : 3;
+ /* Insn expansion: the loop body and branch instruction.
+ For store, one of S8I, S16I or S32I(.N).
+ For advance, ADDI(.N).
+ For branch, BNE. */
+ expand_len += (TARGET_DENSITY && align == 4 ? 2 : 3)
+ + (TARGET_DENSITY ? 2 : 3) + 3;
+ }
/* Function call: preparing two arguments. */
funccall_len = xtensa_sizeof_MOVI (value);
@@ -1555,7 +1580,11 @@ xtensa_expand_block_set_small_loop (rtx *operands)
dst = gen_reg_rtx (SImode);
emit_move_insn (dst, x);
end = gen_reg_rtx (SImode);
- emit_insn (gen_addsi3 (end, dst, operands[1] /* the length */));
+ if (TARGET_LOOPS && optimize)
+ x = force_reg (SImode, operands[1] /* the length */);
+ else
+ x = operands[1];
+ emit_insn (gen_addsi3 (end, dst, x));
switch (align)
{
case 1:
From: Takayuki 'January June' Suwa <jjsuwa_sys3175@yahoo.co.jp> Now apply to almost any size of aligned block under such circumstances. gcc/ChangeLog: * config/xtensa/xtensa.cc (xtensa_expand_block_set_small_loop): Pass through the block length / loop count conditions if zero-overhead looping is configured and active, --- gcc/config/xtensa/xtensa.cc | 71 ++++++++++++++++++++++++++----------- 1 file changed, 50 insertions(+), 21 deletions(-)