===================================================================
@@ -64,7 +64,8 @@ (define_register_constraint "wa" "rs6000
(define_register_constraint "wd" "rs6000_constraints[RS6000_CONSTRAINT_wd]"
"VSX vector register to hold vector double data or NO_REGS.")
-;; we is not currently used
+(define_register_constraint "we" "rs6000_constraints[RS6000_CONSTRAINT_we]"
+ "VSX register if the -mpower9-vector -m64 options were used or NO_REGS.")
(define_register_constraint "wf" "rs6000_constraints[RS6000_CONSTRAINT_wf]"
"VSX vector register to hold vector float data or NO_REGS.")
@@ -147,6 +148,12 @@ (define_memory_constraint "wG"
"Memory operand suitable for TOC fusion memory references"
(match_operand 0 "toc_fusion_mem_wrapped"))
+(define_constraint "wL"
+ "Int constant that is the element number mfvsrld accesses in a vector."
+ (and (match_code "const_int")
+ (and (match_test "TARGET_DIRECT_MOVE_128")
+ (match_test "(ival == VECTOR_ELEMENT_MFVSRLD_64BIT)"))))
+
;; Lq/stq validates the address for load/store quad
(define_memory_constraint "wQ"
"Memory operand suitable for the load/store quad instructions"
===================================================================
@@ -55,6 +55,8 @@ extern const char *rs6000_output_move_12
extern bool rs6000_move_128bit_ok_p (rtx []);
extern bool rs6000_split_128bit_ok_p (rtx []);
extern void rs6000_expand_float128_convert (rtx, rtx, bool);
+extern void convert_float128_to_int (rtx *, enum rtx_code);
+extern void convert_int_to_float128 (rtx *, enum rtx_code);
extern void rs6000_expand_vector_init (rtx, rtx);
extern void paired_expand_vector_init (rtx, rtx);
extern void rs6000_expand_vector_set (rtx, rtx, int);
===================================================================
@@ -2575,6 +2575,10 @@ rs6000_debug_reg_global (void)
if (TARGET_VSX)
fprintf (stderr, DEBUG_FMT_D, "VSX easy 64-bit scalar element",
(int)VECTOR_ELEMENT_SCALAR_64BIT);
+
+ if (TARGET_DIRECT_MOVE_128)
+ fprintf (stderr, DEBUG_FMT_D, "VSX easy 64-bit mfvsrld element",
+ (int)VECTOR_ELEMENT_MFVSRLD_64BIT);
}
@@ -2986,6 +2990,10 @@ rs6000_init_hard_regno_mode_ok (bool glo
rs6000_constraints[RS6000_CONSTRAINT_wp] = VSX_REGS; /* TFmode */
}
+ /* Support for new direct moves. */
+ if (TARGET_DIRECT_MOVE_128)
+ rs6000_constraints[RS6000_CONSTRAINT_we] = VSX_REGS;
+
/* Set up the reload helper and direct move functions. */
if (TARGET_VSX || TARGET_ALTIVEC)
{
@@ -3034,7 +3042,7 @@ rs6000_init_hard_regno_mode_ok (bool glo
reg_addr[TImode].reload_load = CODE_FOR_reload_ti_di_load;
}
- if (TARGET_DIRECT_MOVE)
+ if (TARGET_DIRECT_MOVE && !TARGET_DIRECT_MOVE_128)
{
reg_addr[TImode].reload_gpr_vsx = CODE_FOR_reload_gpr_from_vsxti;
reg_addr[V1TImode].reload_gpr_vsx = CODE_FOR_reload_gpr_from_vsxv1ti;
@@ -18081,6 +18089,11 @@ rs6000_secondary_reload_simple_move (enu
|| (to_type == VSX_REG_TYPE && from_type == GPR_REG_TYPE)))
return true;
+ else if (TARGET_DIRECT_MOVE_128 && size == 16
+ && ((to_type == VSX_REG_TYPE && from_type == GPR_REG_TYPE)
+ || (to_type == GPR_REG_TYPE && from_type == VSX_REG_TYPE)))
+ return true;
+
else if (TARGET_MFPGPR && TARGET_POWERPC64 && size == 8
&& ((to_type == GPR_REG_TYPE && from_type == FPR_REG_TYPE)
|| (to_type == FPR_REG_TYPE && from_type == GPR_REG_TYPE)))
@@ -18094,7 +18107,7 @@ rs6000_secondary_reload_simple_move (enu
return false;
}
-/* Power8 helper function for rs6000_secondary_reload, handle all of the
+/* Direct move helper function for rs6000_secondary_reload, handle all of the
special direct moves that involve allocating an extra register, return the
insn code of the helper function if there is such a function or
CODE_FOR_nothing if not. */
@@ -18116,8 +18129,8 @@ rs6000_secondary_reload_direct_move (enu
if (size == 16)
{
/* Handle moving 128-bit values from GPRs to VSX point registers on
- power8 when running in 64-bit mode using XXPERMDI to glue the two
- 64-bit values back together. */
+ ISA 2.07 (power8, power9) when running in 64-bit mode using
+ XXPERMDI to glue the two 64-bit values back together. */
if (to_type == VSX_REG_TYPE && from_type == GPR_REG_TYPE)
{
cost = 3; /* 2 mtvsrd's, 1 xxpermdi. */
@@ -18125,7 +18138,7 @@ rs6000_secondary_reload_direct_move (enu
}
/* Handle moving 128-bit values from VSX point registers to GPRs on
- power8 when running in 64-bit mode using XXPERMDI to get access to the
+ ISA 2.07 when running in 64-bit mode using XXPERMDI to get access to the
bottom 64-bit value. */
else if (to_type == GPR_REG_TYPE && from_type == VSX_REG_TYPE)
{
@@ -18150,11 +18163,32 @@ rs6000_secondary_reload_direct_move (enu
}
}
- else if (size == 8)
+ if (TARGET_POWERPC64 && size == 16)
+ {
+ /* Handle moving 128-bit values from GPRs to VSX point registers on
+ ISA 2.07 when running in 64-bit mode using XXPERMDI to glue the two
+ 64-bit values back together. */
+ if (to_type == VSX_REG_TYPE && from_type == GPR_REG_TYPE)
+ {
+ cost = 3; /* 2 mtvsrd's, 1 xxpermdi. */
+ icode = reg_addr[mode].reload_vsx_gpr;
+ }
+
+ /* Handle moving 128-bit values from VSX point registers to GPRs on
+ ISA 2.07 when running in 64-bit mode using XXPERMDI to get access to the
+ bottom 64-bit value. */
+ else if (to_type == GPR_REG_TYPE && from_type == VSX_REG_TYPE)
+ {
+ cost = 3; /* 2 mfvsrd's, 1 xxpermdi. */
+ icode = reg_addr[mode].reload_gpr_vsx;
+ }
+ }
+
+ else if (!TARGET_POWERPC64 && size == 8)
{
/* Handle moving 64-bit values from GPRs to floating point registers on
- power8 when running in 32-bit mode using FMRGOW to glue the two 32-bit
- values back together. Altivec register classes must be handled
+ ISA 2.07 when running in 32-bit mode using FMRGOW to glue the two
+ 32-bit values back together. Altivec register classes must be handled
specially since a different instruction is used, and the secondary
reload support requires a single instruction class in the scratch
register constraint. However, right now TFmode is not allowed in
@@ -18181,7 +18215,7 @@ rs6000_secondary_reload_direct_move (enu
/* Return whether a move between two register classes can be done either
directly (simple move) or via a pattern that uses a single extra temporary
- (using power8's direct move in this case. */
+ (using ISA 2.07's direct move in this case. */
static bool
rs6000_secondary_reload_move (enum rs6000_reg_type to_type,
@@ -19220,6 +19254,11 @@ rs6000_output_move_128bit (rtx operands[
if (src_gpr_p)
return "#";
+ if (TARGET_DIRECT_MOVE_128 && src_vsx_p)
+ return (WORDS_BIG_ENDIAN
+ ? "mfvsrd %0,%x1\n\tmfvsrld %L0,%x1"
+ : "mfvsrd %L0,%x1\n\tmfvsrld %0,%x1");
+
else if (TARGET_VSX && TARGET_DIRECT_MOVE && src_vsx_p)
return "#";
}
@@ -19229,6 +19268,11 @@ rs6000_output_move_128bit (rtx operands[
if (src_vsx_p)
return "xxlor %x0,%x1,%x1";
+ else if (TARGET_DIRECT_MOVE_128 && src_gpr_p)
+ return (WORDS_BIG_ENDIAN
+ ? "mtvsrdd %x0,%1,%L1"
+ : "mtvsrdd %x0,%L1,%1");
+
else if (TARGET_DIRECT_MOVE && src_gpr_p)
return "#";
}
@@ -20490,11 +20534,12 @@ rs6000_generate_compare (rtx cmp, machin
emit_insn (cmp);
}
- /* IEEE 128-bit support in VSX registers. The comparison functions
- (__cmpokf2 and __cmpukf2) returns 0..15 that is laid out the same way as
- the PowerPC CR register would for a normal floating point comparison from
- the fcmpo and fcmpu instructions. */
- else if (FLOAT128_IEEE_P (mode))
+ /* IEEE 128-bit support in VSX registers. If we do not have IEEE 128-bit
+ hardware, the comparison functions (__cmpokf2 and __cmpukf2) returns 0..15
+ that is laid out the same way as the PowerPC CR register would for a
+ normal floating point comparison from the fcmpo and fcmpu
+ instructions. */
+ else if (!TARGET_FLOAT128_HW && FLOAT128_IEEE_P (mode))
{
rtx and_reg = gen_reg_rtx (SImode);
rtx dest = gen_reg_rtx (SImode);
@@ -20633,7 +20678,7 @@ rs6000_generate_compare (rtx cmp, machin
/* Some kinds of FP comparisons need an OR operation;
under flag_finite_math_only we don't bother. */
if (FLOAT_MODE_P (mode)
- && !FLOAT128_IEEE_P (mode)
+ && (!FLOAT128_IEEE_P (mode) || TARGET_FLOAT128_HW)
&& !flag_finite_math_only
&& !(TARGET_HARD_FLOAT && !TARGET_FPRS)
&& (code == LE || code == GE
@@ -20726,6 +20771,56 @@ rs6000_expand_float128_convert (rtx dest
bool do_move = false;
rtx libfunc = NULL_RTX;
rtx dest2;
+ typedef rtx (*rtx_2func_t) (rtx, rtx);
+ rtx_2func_t hw_convert = (rtx_2func_t)0;
+ size_t kf_or_tf;
+
+ struct hw_conv_t {
+ rtx_2func_t from_df;
+ rtx_2func_t from_sf;
+ rtx_2func_t from_si_sign;
+ rtx_2func_t from_si_uns;
+ rtx_2func_t from_di_sign;
+ rtx_2func_t from_di_uns;
+ rtx_2func_t to_df;
+ rtx_2func_t to_sf;
+ rtx_2func_t to_si_sign;
+ rtx_2func_t to_si_uns;
+ rtx_2func_t to_di_sign;
+ rtx_2func_t to_di_uns;
+ } hw_conversions[2] = {
+ /* convertions to/from KFmode */
+ {
+ gen_extenddfkf2_hw, /* KFmode <- DFmode. */
+ gen_extendsfkf2_hw, /* KFmode <- SFmode. */
+ gen_float_kfsi2_hw, /* KFmode <- SImode (signed). */
+ gen_floatuns_kfsi2_hw, /* KFmode <- SImode (unsigned). */
+ gen_float_kfdi2_hw, /* KFmode <- DImode (signed). */
+ gen_floatuns_kfdi2_hw, /* KFmode <- DImode (unsigned). */
+ gen_trunckfdf2_hw, /* DFmode <- KFmode. */
+ gen_trunckfsf2_hw, /* SFmode <- KFmode. */
+ gen_fix_kfsi2_hw, /* SImode <- KFmode (signed). */
+ gen_fixuns_kfsi2_hw, /* SImode <- KFmode (unsigned). */
+ gen_fix_kfdi2_hw, /* DImode <- KFmode (signed). */
+ gen_fixuns_kfdi2_hw, /* DImode <- KFmode (unsigned). */
+ },
+
+ /* convertions to/from TFmode */
+ {
+ gen_extenddftf2_hw, /* TFmode <- DFmode. */
+ gen_extendsftf2_hw, /* TFmode <- SFmode. */
+ gen_float_tfsi2_hw, /* TFmode <- SImode (signed). */
+ gen_floatuns_tfsi2_hw, /* TFmode <- SImode (unsigned). */
+ gen_float_tfdi2_hw, /* TFmode <- DImode (signed). */
+ gen_floatuns_tfdi2_hw, /* TFmode <- DImode (unsigned). */
+ gen_trunctfdf2_hw, /* DFmode <- TFmode. */
+ gen_trunctfsf2_hw, /* SFmode <- TFmode. */
+ gen_fix_tfsi2_hw, /* SImode <- TFmode (signed). */
+ gen_fixuns_tfsi2_hw, /* SImode <- TFmode (unsigned). */
+ gen_fix_tfdi2_hw, /* DImode <- TFmode (signed). */
+ gen_fixuns_tfdi2_hw, /* DImode <- TFmode (unsigned). */
+ },
+ };
if (dest_mode == src_mode)
gcc_unreachable ();
@@ -20745,14 +20840,23 @@ rs6000_expand_float128_convert (rtx dest
/* Convert to IEEE 128-bit floating point. */
if (FLOAT128_IEEE_P (dest_mode))
{
+ if (dest_mode == KFmode)
+ kf_or_tf = 0;
+ else if (dest_mode == TFmode)
+ kf_or_tf = 1;
+ else
+ gcc_unreachable ();
+
switch (src_mode)
{
case DFmode:
cvt = sext_optab;
+ hw_convert = hw_conversions[kf_or_tf].from_df;
break;
case SFmode:
cvt = sext_optab;
+ hw_convert = hw_conversions[kf_or_tf].from_sf;
break;
case KFmode:
@@ -20765,8 +20869,29 @@ rs6000_expand_float128_convert (rtx dest
break;
case SImode:
+ if (unsigned_p)
+ {
+ cvt = ufloat_optab;
+ hw_convert = hw_conversions[kf_or_tf].from_si_uns;
+ }
+ else
+ {
+ cvt = sfloat_optab;
+ hw_convert = hw_conversions[kf_or_tf].from_si_sign;
+ }
+ break;
+
case DImode:
- cvt = (unsigned_p) ? ufloat_optab : sfloat_optab;
+ if (unsigned_p)
+ {
+ cvt = ufloat_optab;
+ hw_convert = hw_conversions[kf_or_tf].from_di_uns;
+ }
+ else
+ {
+ cvt = sfloat_optab;
+ hw_convert = hw_conversions[kf_or_tf].from_di_sign;
+ }
break;
default:
@@ -20777,14 +20902,23 @@ rs6000_expand_float128_convert (rtx dest
/* Convert from IEEE 128-bit floating point. */
else if (FLOAT128_IEEE_P (src_mode))
{
+ if (src_mode == KFmode)
+ kf_or_tf = 0;
+ else if (src_mode == TFmode)
+ kf_or_tf = 1;
+ else
+ gcc_unreachable ();
+
switch (dest_mode)
{
case DFmode:
cvt = trunc_optab;
+ hw_convert = hw_conversions[kf_or_tf].to_df;
break;
case SFmode:
cvt = trunc_optab;
+ hw_convert = hw_conversions[kf_or_tf].to_sf;
break;
case KFmode:
@@ -20797,8 +20931,29 @@ rs6000_expand_float128_convert (rtx dest
break;
case SImode:
+ if (unsigned_p)
+ {
+ cvt = ufix_optab;
+ hw_convert = hw_conversions[kf_or_tf].to_si_uns;
+ }
+ else
+ {
+ cvt = sfix_optab;
+ hw_convert = hw_conversions[kf_or_tf].to_si_sign;
+ }
+ break;
+
case DImode:
- cvt = (unsigned_p) ? ufix_optab : sfix_optab;
+ if (unsigned_p)
+ {
+ cvt = ufix_optab;
+ hw_convert = hw_conversions[kf_or_tf].to_di_uns;
+ }
+ else
+ {
+ cvt = sfix_optab;
+ hw_convert = hw_conversions[kf_or_tf].to_di_sign;
+ }
break;
default:
@@ -20817,6 +20972,10 @@ rs6000_expand_float128_convert (rtx dest
if (do_move)
emit_move_insn (dest, gen_lowpart (dest_mode, src));
+ /* Handle conversion if we have hardware support. */
+ else if (TARGET_FLOAT128_HW && hw_convert)
+ emit_insn ((hw_convert) (dest, src));
+
/* Call an external function to do the conversion. */
else if (cvt != unknown_optab)
{
@@ -20837,6 +20996,92 @@ rs6000_expand_float128_convert (rtx dest
return;
}
+/* Split a conversion from __float128 to an integer type into separate insns.
+ OPERANDS points to the destination, source, and V2DI temporary
+ register. CODE is either FIX or UNSIGNED_FIX. */
+
+void
+convert_float128_to_int (rtx *operands, enum rtx_code code)
+{
+ rtx dest = operands[0];
+ rtx src = operands[1];
+ rtx tmp = operands[2];
+ rtx cvt;
+ rtvec cvt_vec;
+ rtx cvt_unspec;
+ rtvec move_vec;
+ rtx move_unspec;
+
+ if (GET_CODE (tmp) == SCRATCH)
+ tmp = gen_reg_rtx (V2DImode);
+
+ if (MEM_P (dest))
+ dest = rs6000_address_for_fpconvert (dest);
+
+ /* Generate the actual convert insn of the form:
+ (set (tmp) (unspec:V2DI [(fix:SI (reg:KF))] UNSPEC_IEEE128_CONVERT)). */
+ cvt = gen_rtx_fmt_e (code, GET_MODE (dest), src);
+ cvt_vec = gen_rtvec (1, cvt);
+ cvt_unspec = gen_rtx_UNSPEC (V2DImode, cvt_vec, UNSPEC_IEEE128_CONVERT);
+ emit_insn (gen_rtx_SET (tmp, cvt_unspec));
+
+ /* Generate the move insn of the form:
+ (set (dest:SI) (unspec:SI [(tmp:V2DI))] UNSPEC_IEEE128_MOVE)). */
+ move_vec = gen_rtvec (1, tmp);
+ move_unspec = gen_rtx_UNSPEC (GET_MODE (dest), move_vec, UNSPEC_IEEE128_MOVE);
+ emit_insn (gen_rtx_SET (dest, move_unspec));
+}
+
+/* Split a conversion from an integer type to __float128 into separate insns.
+ OPERANDS points to the destination, source, and V2DI temporary
+ register. CODE is either FLOAT or UNSIGNED_FLOAT. */
+
+void
+convert_int_to_float128 (rtx *operands, enum rtx_code code)
+{
+ rtx dest = operands[0];
+ rtx src = operands[1];
+ rtx tmp = operands[2];
+ rtx cvt;
+ rtvec cvt_vec;
+ rtx cvt_unspec;
+ rtvec move_vec;
+ rtx move_unspec;
+ rtx unsigned_flag;
+
+ if (GET_CODE (tmp) == SCRATCH)
+ tmp = gen_reg_rtx (V2DImode);
+
+ if (MEM_P (src))
+ src = rs6000_address_for_fpconvert (src);
+
+ /* Generate the move of the integer into the Altivec register of the form:
+ (set (tmp:V2DI) (unspec:V2DI [(src:SI)
+ (const_int 0)] UNSPEC_IEEE128_MOVE)).
+
+ or:
+ (set (tmp:V2DI) (unspec:V2DI [(src:DI)] UNSPEC_IEEE128_MOVE)). */
+
+ if (GET_MODE (src) == SImode)
+ {
+ unsigned_flag = (code == UNSIGNED_FLOAT) ? const1_rtx : const0_rtx;
+ move_vec = gen_rtvec (2, src, unsigned_flag);
+ }
+ else
+ move_vec = gen_rtvec (1, src);
+
+ move_unspec = gen_rtx_UNSPEC (V2DImode, move_vec, UNSPEC_IEEE128_MOVE);
+ emit_insn (gen_rtx_SET (tmp, move_unspec));
+
+ /* Generate the actual convert insn of the form:
+ (set (dest:KF) (float:KF (unspec:DI [(tmp:V2DI)]
+ UNSPEC_IEEE128_CONVERT))). */
+ cvt_vec = gen_rtvec (1, tmp);
+ cvt_unspec = gen_rtx_UNSPEC (DImode, cvt_vec, UNSPEC_IEEE128_CONVERT);
+ cvt = gen_rtx_fmt_e (code, GET_MODE (dest), cvt_unspec);
+ emit_insn (gen_rtx_SET (dest, cvt));
+}
+
/* Emit the RTL for an sISEL pattern. */
===================================================================
@@ -760,31 +760,31 @@ (define_split
"")
(define_insn "*vsx_mov<mode>"
- [(set (match_operand:VSX_M 0 "nonimmediate_operand" "=Z,<VSr>,<VSr>,?Z,?<VSa>,?<VSa>,wQ,?&r,??Y,??r,??r,<VSr>,?<VSa>,*r,v,wZ, v")
- (match_operand:VSX_M 1 "input_operand" "<VSr>,Z,<VSr>,<VSa>,Z,<VSa>,r,wQ,r,Y,r,j,j,j,W,v,wZ"))]
+ [(set (match_operand:VSX_M 0 "nonimmediate_operand" "=Z,<VSr>,<VSr>,?Z,?<VSa>,?<VSa>,r,we,wQ,?&r,??Y,??r,??r,<VSr>,?<VSa>,*r,v,wZ,v")
+ (match_operand:VSX_M 1 "input_operand" "<VSr>,Z,<VSr>,<VSa>,Z,<VSa>,we,b,r,wQ,r,Y,r,j,j,j,W,v,wZ"))]
"VECTOR_MEM_VSX_P (<MODE>mode)
&& (register_operand (operands[0], <MODE>mode)
|| register_operand (operands[1], <MODE>mode))"
{
return rs6000_output_move_128bit (operands);
}
- [(set_attr "type" "vecstore,vecload,vecsimple,vecstore,vecload,vecsimple,load,store,store,load, *,vecsimple,vecsimple,*, *,vecstore,vecload")
- (set_attr "length" "4,4,4,4,4,4,12,12,12,12,16,4,4,*,16,4,4")])
+ [(set_attr "type" "vecstore,vecload,vecsimple,vecstore,vecload,vecsimple,mffgpr,mftgpr,load,store,store,load, *,vecsimple,vecsimple,*, *,vecstore,vecload")
+ (set_attr "length" "4,4,4,4,4,4,8,4,12,12,12,12,16,4,4,*,16,4,4")])
;; Unlike other VSX moves, allow the GPRs even for reloading, since a normal
;; use of TImode is for unions. However for plain data movement, slightly
;; favor the vector loads
(define_insn "*vsx_movti_64bit"
- [(set (match_operand:TI 0 "nonimmediate_operand" "=Z,wa,wa,wa,v,v,wZ,wQ,&r,Y,r,r,?r")
- (match_operand:TI 1 "input_operand" "wa,Z,wa,O,W,wZ,v,r,wQ,r,Y,r,n"))]
+ [(set (match_operand:TI 0 "nonimmediate_operand" "=Z,wa,wa,wa,r,we,v,v,wZ,wQ,&r,Y,r,r,?r")
+ (match_operand:TI 1 "input_operand" "wa,Z,wa,O,we,b,W,wZ,v,r,wQ,r,Y,r,n"))]
"TARGET_POWERPC64 && VECTOR_MEM_VSX_P (TImode)
&& (register_operand (operands[0], TImode)
|| register_operand (operands[1], TImode))"
{
return rs6000_output_move_128bit (operands);
}
- [(set_attr "type" "vecstore,vecload,vecsimple,vecsimple,vecsimple,vecstore,vecload,store,load,store,load,*,*")
- (set_attr "length" "4,4,4,4,16,4,4,8,8,8,8,8,8")])
+ [(set_attr "type" "vecstore,vecload,vecsimple,vecsimple,mffgpr,mftgpr,vecsimple,vecstore,vecload,store,load,store,load,*,*")
+ (set_attr "length" "4,4,4,4,8,4,16,4,4,8,8,8,8,8,8")])
(define_insn "*vsx_movti_32bit"
[(set (match_operand:TI 0 "nonimmediate_operand" "=Z,wa,wa,wa,v, v,wZ,Q,Y,????r,????r,????r,r")
@@ -1909,11 +1909,11 @@ (define_expand "vsx_extract_<mode>"
;; Optimize cases were we can do a simple or direct move.
;; Or see if we can avoid doing the move at all
(define_insn "*vsx_extract_<mode>_internal1"
- [(set (match_operand:<VS_scalar> 0 "register_operand" "=d,<VS_64reg>,r")
+ [(set (match_operand:<VS_scalar> 0 "register_operand" "=d,<VS_64reg>,r,r")
(vec_select:<VS_scalar>
- (match_operand:VSX_D 1 "register_operand" "d,<VS_64reg>,<VS_64dm>")
+ (match_operand:VSX_D 1 "register_operand" "d,<VS_64reg>,<VS_64dm>,<VS_64dm>")
(parallel
- [(match_operand:QI 2 "vsx_scalar_64bit" "wD,wD,wD")])))]
+ [(match_operand:QI 2 "vsx_scalar_64bit" "wD,wD,wD,wL")])))]
"VECTOR_MEM_VSX_P (<MODE>mode) && TARGET_POWERPC64 && TARGET_DIRECT_MOVE"
{
int op0_regno = REGNO (operands[0]);
@@ -1923,14 +1923,16 @@ (define_insn "*vsx_extract_<mode>_intern
return "nop";
if (INT_REGNO_P (op0_regno))
- return "mfvsrd %0,%x1";
+ return ((INTVAL (operands[2]) == VECTOR_ELEMENT_MFVSRLD_64BIT)
+ ? "mfvsrdl %0,%x1"
+ : "mfvsrd %0,%x1");
if (FP_REGNO_P (op0_regno) && FP_REGNO_P (op1_regno))
return "fmr %0,%1";
return "xxlor %x0,%x1,%x1";
}
- [(set_attr "type" "fp,vecsimple,mftgpr")
+ [(set_attr "type" "fp,vecsimple,mftgpr,mftgpr")
(set_attr "length" "4")])
(define_insn "*vsx_extract_<mode>_internal2"
===================================================================
@@ -516,6 +516,10 @@ extern int rs6000_vector_align[];
with scalar instructions. */
#define VECTOR_ELEMENT_SCALAR_64BIT ((BYTES_BIG_ENDIAN) ? 0 : 1)
+/* Element number of the 64-bit value in a 128-bit vector that can be accessed
+ with the ISA 3.0 MFVSRLD instructions. */
+#define VECTOR_ELEMENT_MFVSRLD_64BIT ((BYTES_BIG_ENDIAN) ? 1 : 0)
+
/* Alignment options for fields in structures for sub-targets following
AIX-like ABI.
ALIGN_POWER word-aligns FP doubles (default AIX ABI).
@@ -567,10 +571,13 @@ extern int rs6000_vector_align[];
#define TARGET_FCTIWUZ TARGET_POPCNTD
#define TARGET_CTZ TARGET_MODULO
#define TARGET_EXTSWSLI (TARGET_MODULO && TARGET_POWERPC64)
+#define TARGET_MADDLD (TARGET_MODULO && TARGET_POWERPC64)
#define TARGET_XSCVDPSPN (TARGET_DIRECT_MOVE || TARGET_P8_VECTOR)
#define TARGET_XSCVSPDPN (TARGET_DIRECT_MOVE || TARGET_P8_VECTOR)
#define TARGET_VADDUQM (TARGET_P8_VECTOR && TARGET_POWERPC64)
+#define TARGET_DIRECT_MOVE_128 (TARGET_P9_VECTOR && TARGET_DIRECT_MOVE \
+ && TARGET_POWERPC64)
/* Byte/char syncs were added as phased in for ISA 2.06B, but are not present
in power7, so conditionalize them on p8 features. TImode syncs need quad
@@ -1517,6 +1524,7 @@ enum r6000_reg_class_enum {
RS6000_CONSTRAINT_v, /* Altivec registers */
RS6000_CONSTRAINT_wa, /* Any VSX register */
RS6000_CONSTRAINT_wd, /* VSX register for V2DF */
+ RS6000_CONSTRAINT_we, /* VSX register if ISA 3.0 vector. */
RS6000_CONSTRAINT_wf, /* VSX register for V4SF */
RS6000_CONSTRAINT_wg, /* FPR register for -mmfpgpr */
RS6000_CONSTRAINT_wh, /* FPR register for direct moves. */
===================================================================
@@ -143,6 +143,9 @@ (define_c_enum "unspec"
UNSPEC_STACK_CHECK
UNSPEC_FUSION_P9
UNSPEC_FUSION_ADDIS
+ UNSPEC_ROUND_TO_ODD
+ UNSPEC_IEEE128_MOVE
+ UNSPEC_IEEE128_CONVERT
])
;;
@@ -381,6 +384,8 @@ (define_mode_iterator FMA_F [
(V2SF "TARGET_PAIRED_FLOAT")
(V4SF "VECTOR_UNIT_ALTIVEC_OR_VSX_P (V4SFmode)")
(V2DF "VECTOR_UNIT_ALTIVEC_OR_VSX_P (V2DFmode)")
+ (KF "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (KFmode)")
+ (TF "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (TFmode)")
])
; Floating point move iterators to combine binary and decimal moves
@@ -485,10 +490,10 @@ (define_mode_attr Ftrad [(SF "s") (DF "
(define_mode_attr Fvsx [(SF "sp") (DF "dp")])
; SF/DF constraint for arithmetic on traditional floating point registers
-(define_mode_attr Ff [(SF "f") (DF "d")])
+(define_mode_attr Ff [(SF "f") (DF "d") (DI "d")])
; SF/DF constraint for arithmetic on VSX registers
-(define_mode_attr Fv [(SF "wy") (DF "ws")])
+(define_mode_attr Fv [(SF "wy") (DF "ws") (DI "wi")])
; SF/DF constraint for arithmetic on altivec registers
(define_mode_attr Fa [(SF "wu") (DF "wv")])
@@ -510,9 +515,31 @@ (define_code_attr return_str [(return ""
(define_code_iterator iorxor [ior xor])
; Signed/unsigned variants of ops.
-(define_code_iterator any_extend [sign_extend zero_extend])
-(define_code_attr u [(sign_extend "") (zero_extend "u")])
-(define_code_attr su [(sign_extend "s") (zero_extend "u")])
+(define_code_iterator any_extend [sign_extend zero_extend])
+(define_code_iterator any_fix [fix unsigned_fix])
+(define_code_iterator any_float [float unsigned_float])
+
+(define_code_attr u [(sign_extend "")
+ (zero_extend "u")])
+
+(define_code_attr su [(sign_extend "s")
+ (zero_extend "u")
+ (fix "s")
+ (unsigned_fix "s")
+ (float "s")
+ (unsigned_float "u")])
+
+(define_code_attr az [(sign_extend "a")
+ (zero_extend "z")
+ (fix "a")
+ (unsigned_fix "z")
+ (float "a")
+ (unsigned_float "z")])
+
+(define_code_attr uns [(fix "")
+ (unsigned_fix "uns")
+ (float "")
+ (unsigned_float "uns")])
; Various instructions that come in SI and DI forms.
; A generic w/d attribute, for things like cmpw/cmpd.
@@ -2815,6 +2842,14 @@ (define_expand "<u>mul<mode><dmode>3"
DONE;
})
+(define_insn "*maddld4"
+ [(set (match_operand:DI 0 "gpc_reg_operand" "=r")
+ (plus:DI (mult:DI (match_operand:DI 1 "gpc_reg_operand" "r")
+ (match_operand:DI 2 "gpc_reg_operand" "r"))
+ (match_operand:DI 3 "gpc_reg_operand" "r")))]
+ "TARGET_MADDLD"
+ "maddld %0,%1,%2,%3"
+ [(set_attr "type" "mul")])
(define_insn "udiv<mode>3"
[(set (match_operand:GPR 0 "gpc_reg_operand" "=r")
@@ -7003,7 +7038,16 @@ (define_expand "neg<mode>2"
{
if (FLOAT128_IEEE_P (<MODE>mode))
{
- if (TARGET_FLOAT128)
+ if (TARGET_FLOAT128_HW)
+ {
+ if (<MODE>mode == TFmode)
+ emit_insn (gen_negtf2_hw (operands[0], operands[1]));
+ else if (<MODE>mode == KFmode)
+ emit_insn (gen_negkf2_hw (operands[0], operands[1]));
+ else
+ gcc_unreachable ();
+ }
+ else if (TARGET_FLOAT128)
{
if (<MODE>mode == TFmode)
emit_insn (gen_ieee_128bit_vsx_negtf2 (operands[0], operands[1]));
@@ -7053,7 +7097,17 @@ (define_expand "abs<mode>2"
if (FLOAT128_IEEE_P (<MODE>mode))
{
- if (TARGET_FLOAT128)
+ if (TARGET_FLOAT128_HW)
+ {
+ if (<MODE>mode == TFmode)
+ emit_insn (gen_abstf2_hw (operands[0], operands[1]));
+ else if (<MODE>mode == KFmode)
+ emit_insn (gen_abskf2_hw (operands[0], operands[1]));
+ else
+ FAIL;
+ DONE;
+ }
+ else if (TARGET_FLOAT128)
{
if (<MODE>mode == TFmode)
emit_insn (gen_ieee_128bit_vsx_abstf2 (operands[0], operands[1]));
@@ -7140,7 +7194,7 @@ (define_insn_and_split "ieee_128bit_vsx_
[(set (match_operand:IEEE128 0 "register_operand" "=wa")
(neg:IEEE128 (match_operand:IEEE128 1 "register_operand" "wa")))
(clobber (match_scratch:V16QI 2 "=v"))]
- "TARGET_FLOAT128"
+ "TARGET_FLOAT128 && !TARGET_FLOAT128_HW"
"#"
"&& 1"
[(parallel [(set (match_dup 0)
@@ -7160,7 +7214,7 @@ (define_insn "*ieee_128bit_vsx_neg<mode>
[(set (match_operand:IEEE128 0 "register_operand" "=wa")
(neg:IEEE128 (match_operand:IEEE128 1 "register_operand" "wa")))
(use (match_operand:V16QI 2 "register_operand" "=v"))]
- "TARGET_FLOAT128"
+ "TARGET_FLOAT128 && !TARGET_FLOAT128_HW"
"xxlxor %x0,%x1,%x2"
[(set_attr "type" "vecsimple")])
@@ -7169,7 +7223,7 @@ (define_insn_and_split "ieee_128bit_vsx_
[(set (match_operand:IEEE128 0 "register_operand" "=wa")
(abs:IEEE128 (match_operand:IEEE128 1 "register_operand" "wa")))
(clobber (match_scratch:V16QI 2 "=v"))]
- "TARGET_FLOAT128 && FLOAT128_IEEE_P (<MODE>mode)"
+ "TARGET_FLOAT128 && !TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
"#"
"&& 1"
[(parallel [(set (match_dup 0)
@@ -7189,7 +7243,7 @@ (define_insn "*ieee_128bit_vsx_abs<mode>
[(set (match_operand:IEEE128 0 "register_operand" "=wa")
(abs:IEEE128 (match_operand:IEEE128 1 "register_operand" "wa")))
(use (match_operand:V16QI 2 "register_operand" "=v"))]
- "TARGET_FLOAT128"
+ "TARGET_FLOAT128 && !TARGET_FLOAT128_HW"
"xxlandc %x0,%x1,%x2"
[(set_attr "type" "vecsimple")])
@@ -7200,7 +7254,7 @@ (define_insn_and_split "*ieee_128bit_vsx
(abs:IEEE128
(match_operand:IEEE128 1 "register_operand" "wa"))))
(clobber (match_scratch:V16QI 2 "=v"))]
- "TARGET_FLOAT128 && FLOAT128_IEEE_P (<MODE>mode)"
+ "TARGET_FLOAT128 && !TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
"#"
"&& 1"
[(parallel [(set (match_dup 0)
@@ -7222,7 +7276,7 @@ (define_insn "*ieee_128bit_vsx_nabs<mode
(abs:IEEE128
(match_operand:IEEE128 1 "register_operand" "wa"))))
(use (match_operand:V16QI 2 "register_operand" "=v"))]
- "TARGET_FLOAT128"
+ "TARGET_FLOAT128 && !TARGET_FLOAT128_HW"
"xxlor %x0,%x1,%x2"
[(set_attr "type" "vecsimple")])
@@ -7480,7 +7534,10 @@ (define_split
(match_operand:FMOVE128_GPR 1 "input_operand" ""))]
"reload_completed
&& (int_reg_operand (operands[0], <MODE>mode)
- || int_reg_operand (operands[1], <MODE>mode))"
+ || int_reg_operand (operands[1], <MODE>mode))
+ && (!TARGET_DIRECT_MOVE_128
+ || (!vsx_register_operand (operands[0], <MODE>mode)
+ && !vsx_register_operand (operands[1], <MODE>mode)))"
[(pc)]
{ rs6000_split_multireg_move (operands[0], operands[1]); DONE; })
@@ -12998,6 +13055,332 @@ (define_insn "pack<mode>"
+;; ISA 2.08 IEEE 128-bit floating point support.
+
+(define_insn "add<mode>3"
+ [(set (match_operand:IEEE128 0 "altivec_register_operand" "=v")
+ (plus:IEEE128
+ (match_operand:IEEE128 1 "altivec_register_operand" "v")
+ (match_operand:IEEE128 2 "altivec_register_operand" "v")))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
+ "xsaddqp %0,%1,%2"
+ [(set_attr "type" "vecfloat")])
+
+(define_insn "sub<mode>3"
+ [(set (match_operand:IEEE128 0 "altivec_register_operand" "=v")
+ (minus:IEEE128
+ (match_operand:IEEE128 1 "altivec_register_operand" "v")
+ (match_operand:IEEE128 2 "altivec_register_operand" "v")))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
+ "xssubqp %0,%1,%2"
+ [(set_attr "type" "vecfloat")])
+
+(define_insn "mul<mode>3"
+ [(set (match_operand:IEEE128 0 "altivec_register_operand" "=v")
+ (mult:IEEE128
+ (match_operand:IEEE128 1 "altivec_register_operand" "v")
+ (match_operand:IEEE128 2 "altivec_register_operand" "v")))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
+ "xsmulqp %0,%1,%2"
+ [(set_attr "type" "vecfloat")])
+
+(define_insn "div<mode>3"
+ [(set (match_operand:IEEE128 0 "altivec_register_operand" "=v")
+ (div:IEEE128
+ (match_operand:IEEE128 1 "altivec_register_operand" "v")
+ (match_operand:IEEE128 2 "altivec_register_operand" "v")))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
+ "xsdivqp %0,%1,%2"
+ [(set_attr "type" "vecdiv")])
+
+(define_insn "sqrt<mode>2"
+ [(set (match_operand:IEEE128 0 "altivec_register_operand" "=v")
+ (sqrt:IEEE128
+ (match_operand:IEEE128 1 "altivec_register_operand" "v")))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
+ "xssqrtqp %0,%1"
+ [(set_attr "type" "vecdiv")])
+
+(define_insn "copysign<mode>3"
+ [(set (match_operand:IEEE128 0 "altivec_register_operand" "=v")
+ (unspec:IEEE128
+ [(match_operand:IEEE128 1 "altivec_register_operand" "v")
+ (match_operand:IEEE128 2 "altivec_register_operand" "v")]
+ UNSPEC_COPYSIGN))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
+ "xscpsgnqp %0,%2,%1"
+ [(set_attr "type" "vecsimple")])
+
+(define_insn "neg<mode>2_hw"
+ [(set (match_operand:IEEE128 0 "altivec_register_operand" "=v")
+ (neg:IEEE128
+ (match_operand:IEEE128 1 "altivec_register_operand" "v")))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
+ "xsnegqp %0,%1"
+ [(set_attr "type" "vecfloat")])
+
+
+(define_insn "abs<mode>2_hw"
+ [(set (match_operand:IEEE128 0 "altivec_register_operand" "=v")
+ (abs:IEEE128
+ (match_operand:IEEE128 1 "altivec_register_operand" "v")))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
+ "xsabsqp %0,%1"
+ [(set_attr "type" "vecfloat")])
+
+
+(define_insn "*nabs<mode>2_hw"
+ [(set (match_operand:IEEE128 0 "altivec_register_operand" "=v")
+ (neg:IEEE128
+ (abs:IEEE128
+ (match_operand:IEEE128 1 "altivec_register_operand" "v"))))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
+ "xsnabsqp %0,%1"
+ [(set_attr "type" "vecfloat")])
+
+;; Initially don't worry about doing fusion
+(define_insn "*fma<mode>4_hw"
+ [(set (match_operand:IEEE128 0 "altivec_register_operand" "=v")
+ (fma:IEEE128
+ (match_operand:IEEE128 1 "altivec_register_operand" "%v")
+ (match_operand:IEEE128 2 "altivec_register_operand" "v")
+ (match_operand:IEEE128 3 "altivec_register_operand" "0")))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
+ "xsmaddqp %0,%1,%2"
+ [(set_attr "type" "vecfloat")])
+
+(define_insn "*fms<mode>4_hw"
+ [(set (match_operand:IEEE128 0 "altivec_register_operand" "=v")
+ (fma:IEEE128
+ (match_operand:IEEE128 1 "altivec_register_operand" "%v")
+ (match_operand:IEEE128 2 "altivec_register_operand" "v")
+ (neg:IEEE128
+ (match_operand:IEEE128 3 "altivec_register_operand" "0"))))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
+ "xsmsubqp %0,%1,%2"
+ [(set_attr "type" "vecfloat")])
+
+(define_insn "*nfma<mode>4_hw"
+ [(set (match_operand:IEEE128 0 "altivec_register_operand" "=v")
+ (neg:IEEE128
+ (fma:IEEE128
+ (match_operand:IEEE128 1 "altivec_register_operand" "%v")
+ (match_operand:IEEE128 2 "altivec_register_operand" "v")
+ (match_operand:IEEE128 3 "altivec_register_operand" "0"))))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
+ "xsnmaddqp %0,%1,%2"
+ [(set_attr "type" "vecfloat")])
+
+(define_insn "*nfms<mode>4_hw"
+ [(set (match_operand:IEEE128 0 "altivec_register_operand" "=v")
+ (neg:IEEE128
+ (fma:IEEE128
+ (match_operand:IEEE128 1 "altivec_register_operand" "%v")
+ (match_operand:IEEE128 2 "altivec_register_operand" "v")
+ (neg:IEEE128
+ (match_operand:IEEE128 3 "altivec_register_operand" "0")))))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
+ "xsnmsubqp %0,%1,%2"
+ [(set_attr "type" "vecfloat")])
+
+(define_insn "extend<SFDF:mode><IEEE128:mode>2_hw"
+ [(set (match_operand:IEEE128 0 "altivec_register_operand" "=v")
+ (float_extend:IEEE128
+ (match_operand:SFDF 1 "altivec_register_operand" "v")))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<IEEE128:MODE>mode)"
+ "xscvdpqp %0,%1"
+ [(set_attr "type" "vecfloat")])
+
+(define_insn "trunc<mode>df2_hw"
+ [(set (match_operand:DF 0 "altivec_register_operand" "=v")
+ (float_truncate:DF
+ (match_operand:IEEE128 1 "altivec_register_operand" "v")))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
+ "xscvqpdp %0,%1"
+ [(set_attr "type" "vecfloat")])
+
+;; There is no KFmode -> SFmode instruction. Preserve the accuracy by doing
+;; the KFmode -> DFmode conversion using round to odd rather than the normal
+;; conversion
+(define_insn_and_split "trunc<mode>sf2_hw"
+ [(set (match_operand:SF 0 "vsx_register_operand" "=wy")
+ (float_truncate:SF
+ (match_operand:IEEE128 1 "altivec_register_operand" "v")))
+ (clobber (match_scratch:DF 2 "=v"))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
+ "#"
+ "&& 1"
+ [(set (match_dup 2)
+ (unspec:DF [(match_dup 1)] UNSPEC_ROUND_TO_ODD))
+ (set (match_dup 0)
+ (float_truncate:SF (match_dup 2)))]
+{
+ if (GET_CODE (operands[2]) == SCRATCH)
+ operands[2] = gen_reg_rtx (DFmode);
+}
+ [(set_attr "type" "vecfloat")
+ (set_attr "length" "8")])
+
+;; At present SImode is not allowed in VSX registers at all, and DImode is only
+;; allowed in the traditional floating point registers. Use V2DImode so that
+;; we can get a value in an Altivec register.
+
+(define_insn_and_split "fix<uns>_<mode>si2_hw"
+ [(set (match_operand:SI 0 "nonimmediate_operand" "=r,Z")
+ (any_fix:SI (match_operand:IEEE128 1 "altivec_register_operand" "v,v")))
+ (clobber (match_scratch:V2DI 2 "=v,v"))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
+ "#"
+ "&& 1"
+ [(pc)]
+{
+ convert_float128_to_int (operands, <CODE>);
+ DONE;
+}
+ [(set_attr "length" "8")
+ (set_attr "type" "mftgpr,fpstore")])
+
+(define_insn_and_split "fix<uns>_<mode>di2_hw"
+ [(set (match_operand:DI 0 "nonimmediate_operand" "=wr,wi,Z")
+ (any_fix:DI (match_operand:IEEE128 1 "altivec_register_operand" "v,v,v")))
+ (clobber (match_scratch:V2DI 2 "=v,v,v"))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
+ "#"
+ "&& 1"
+ [(pc)]
+{
+ convert_float128_to_int (operands, <CODE>);
+ DONE;
+}
+ [(set_attr "length" "8")
+ (set_attr "type" "mftgpr,vecsimple,fpstore")])
+
+(define_insn_and_split "float<uns>_<mode>si2_hw"
+ [(set (match_operand:IEEE128 0 "altivec_register_operand" "=v,v")
+ (any_float:IEEE128 (match_operand:SI 1 "nonimmediate_operand" "r,Z")))
+ (clobber (match_scratch:V2DI 2 "=v,v"))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
+ "#"
+ "&& 1"
+ [(pc)]
+{
+ convert_int_to_float128 (operands, <CODE>);
+ DONE;
+}
+ [(set_attr "length" "8")
+ (set_attr "type" "vecfloat")])
+
+(define_insn_and_split "float<uns>_<mode>di2_hw"
+ [(set (match_operand:IEEE128 0 "altivec_register_operand" "=v,v,v")
+ (any_float:IEEE128 (match_operand:DI 1 "nonimmediate_operand" "wi,wr,Z")))
+ (clobber (match_scratch:V2DI 2 "=v,v,v"))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
+ "#"
+ "&& 1"
+ [(pc)]
+{
+ convert_int_to_float128 (operands, <CODE>);
+ DONE;
+}
+ [(set_attr "length" "8")
+ (set_attr "type" "vecfloat")])
+
+;; Integer conversion instructions, using V2DImode to get an Altivec register
+(define_insn "*xscvqp<su>wz_<mode>"
+ [(set (match_operand:V2DI 0 "altivec_register_operand" "=v")
+ (unspec:V2DI
+ [(any_fix:SI
+ (match_operand:IEEE128 1 "altivec_register_operand" "v"))]
+ UNSPEC_IEEE128_CONVERT))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
+ "xscvqp<su>wz %0,%1"
+ [(set_attr "type" "vecfloat")])
+
+(define_insn "*xscvqp<su>dz_<mode>"
+ [(set (match_operand:V2DI 0 "altivec_register_operand" "=v")
+ (unspec:V2DI
+ [(any_fix:DI
+ (match_operand:IEEE128 1 "altivec_register_operand" "v"))]
+ UNSPEC_IEEE128_CONVERT))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
+ "xscvqp<su>dz %0,%1"
+ [(set_attr "type" "vecfloat")])
+
+(define_insn "*xscv<su>dqp_<mode>"
+ [(set (match_operand:IEEE128 0 "altivec_register_operand" "=v")
+ (any_float:IEEE128
+ (unspec:DI [(match_operand:V2DI 1 "altivec_register_operand" "v")]
+ UNSPEC_IEEE128_CONVERT)))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
+ "xscv<su>dqp %0,%1"
+ [(set_attr "type" "vecfloat")])
+
+(define_insn "*ieee128_mfvsrd"
+ [(set (match_operand:DI 0 "reg_or_indexed_operand" "=wr,Z,wi")
+ (unspec:DI [(match_operand:V2DI 1 "altivec_register_operand" "v,v,v")]
+ UNSPEC_IEEE128_MOVE))]
+ "TARGET_FLOAT128_HW && TARGET_POWERPC64"
+ "@
+ mfvsrd %0,%x1
+ stxsdx %x1,%y0
+ xxlor %x0,%x1,%x1"
+ [(set_attr "type" "mftgpr,vecsimple,fpstore")])
+
+(define_insn "*ieee128_mfvsrwz"
+ [(set (match_operand:SI 0 "reg_or_indexed_operand" "=r,Z")
+ (unspec:SI [(match_operand:V2DI 1 "altivec_register_operand" "v,v")]
+ UNSPEC_IEEE128_MOVE))]
+ "TARGET_FLOAT128_HW"
+ "@
+ mfvsrwz %0,%x1
+ stxsiwx %x1,%y0"
+ [(set_attr "type" "mftgpr,fpstore")])
+
+;; 0 says do sign-extension, 1 says zero-extension
+(define_insn "*ieee128_mtvsrw"
+ [(set (match_operand:V2DI 0 "altivec_register_operand" "=v,v,v,v")
+ (unspec:V2DI [(match_operand:SI 1 "nonimmediate_operand" "r,Z,r,Z")
+ (match_operand:SI 2 "const_0_to_1_operand" "O,O,n,n")]
+ UNSPEC_IEEE128_MOVE))]
+ "TARGET_FLOAT128_HW"
+ "@
+ mtvsrwa %x0,%1
+ lxsiwax %x0,%y1
+ mtvsrwz %x0,%1
+ lxsiwzx %x0,%y1"
+ [(set_attr "type" "mffgpr,fpload,mffgpr,fpload")])
+
+
+(define_insn "*ieee128_mtvsrd"
+ [(set (match_operand:V2DI 0 "altivec_register_operand" "=v,v,v")
+ (unspec:V2DI [(match_operand:DI 1 "nonimmediate_operand" "wr,Z,wi")]
+ UNSPEC_IEEE128_MOVE))]
+ "TARGET_FLOAT128_HW"
+ "@
+ mtvsrd %x0,%1
+ lxsdx %x0,%y1
+ xxlor %x0,%x1,%x1"
+ [(set_attr "type" "mffgpr,fpload,vecsimple")])
+
+;; IEEE 128-bit instructions with round to odd semantics
+(define_insn "*trunc<mode>df2_odd"
+ [(set (match_operand:DF 0 "vsx_register_operand" "=v")
+ (unspec:DF [(match_operand:IEEE128 1 "altivec_register_operand" "v")]
+ UNSPEC_ROUND_TO_ODD))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
+ "xscvqpdpo %0,%1"
+ [(set_attr "type" "vecfloat")])
+
+;; IEEE 128-bit comparisons
+(define_insn "*cmp<mode>_hw"
+ [(set (match_operand:CCFP 0 "cc_reg_operand" "=y")
+ (compare:CCFP (match_operand:IEEE128 1 "altivec_register_operand" "v")
+ (match_operand:IEEE128 2 "altivec_register_operand" "v")))]
+ "TARGET_FLOAT128_HW && FLOAT128_IEEE_P (<MODE>mode)"
+ "xscmpuqp %0,%1,%2"
+ [(set_attr "type" "fpcompare")])
+
+
(include "sync.md")
(include "vector.md")
===================================================================
@@ -3121,9 +3121,28 @@ asm ("xvadddp %0,%1,%2" : "=wa" (v1) : "
is not correct.
+If an instruction only takes Altivec registers, you do not want to use
+@code{%x<n>}.
+
+@smallexample
+asm ("xsaddqp %0,%1,%2" : "=v" (v1) : "v" (v2), "v" (v3));
+@end smallexample
+
+is correct because the @code{xsaddqp} instruction only takes Altivec
+registers, while:
+
+@smallexample
+asm ("xsaddqp %x0,%x1,%x2" : "=v" (v1) : "v" (v2), "v" (v3));
+@end smallexample
+
+is incorrect.
+
@item wd
VSX vector register to hold vector double data or NO_REGS.
+@item we
+VSX register if the -mpower9-vector -m64 options were used or NO_REGS.
+
@item wf
VSX vector register to hold vector float data or NO_REGS.
@@ -3187,6 +3206,16 @@ Floating point register if the LFIWZX in
@item wD
Int constant that is the element number of the 64-bit scalar in a vector.
+@item wF
+Memory operand suitable for power9 fusion load/stores.
+
+@item wG
+Memory operand suitable for TOC fusion memory references.
+
+@item wL
+Int constant that is the element number that the MFVSRLD instruction
+targets.
+
@item wQ
A memory address that will work with the @code{lq} and @code{stq}
instructions.
===================================================================
@@ -0,0 +1,33 @@
+/* { dg-do compile { target { powerpc*-*-linux* && lp64 } } } */
+/* { dg-require-effective-target powerpc_p9vector_ok } */
+/* { dg-skip-if "do not override -mcpu" { powerpc*-*-* } { "-mcpu=*" } { "-mcpu=power9" } } */
+/* { dg-options "-mcpu=power9 -O2" } */
+
+/* Check code generation for direct move for long types. */
+
+void
+test (vector double *p)
+{
+ vector double v1 = *p;
+ vector double v2;
+ vector double v3;
+ vector double v4;
+
+ /* Force memory -> FPR load. */
+ __asm__ (" # reg %x0" : "+d" (v1));
+
+ /* force VSX -> GPR direct move. */
+ v2 = v1;
+ __asm__ (" # reg %0" : "+r" (v2));
+
+ /* Force GPR -> Altivec direct move. */
+ v3 = v2;
+ __asm__ (" # reg %x0" : "+v" (v3));
+ *p = v3;
+}
+
+/* { dg-final { scan-assembler "mfvsrd" } } */
+/* { dg-final { scan-assembler "mfvsrld" } } */
+/* { dg-final { scan-assembler "mtvsrdd" } } */
+
+
===================================================================
@@ -0,0 +1,18 @@
+/* { dg-do compile { target { powerpc*-*-* && lp64 } } } */
+/* { dg-require-effective-target powerpc_float128_hw_ok } */
+/* { dg-skip-if "do not override -mcpu" { powerpc*-*-* } { "-mcpu=*" } { "-mcpu=power9" } } */
+/* { dg-options "-mcpu=power9 -O2" } */
+
+__float128 f128_add (__float128 a, __float128 b) { return a+b; }
+__float128 f128_sub (__float128 a, __float128 b) { return a-b; }
+__float128 f128_mul (__float128 a, __float128 b) { return a*b; }
+__float128 f128_div (__float128 a, __float128 b) { return a/b; }
+__float128 f128_fma (__float128 a, __float128 b, __float128 c) { return (a*b)+c; }
+long f128_cmove (__float128 a, __float128 b, long c, long d) { return (a == b) ? c : d; }
+
+/* { dg-final { scan-assembler "xsaddqp" } } */
+/* { dg-final { scan-assembler "xssubqp" } } */
+/* { dg-final { scan-assembler "xsmulqp" } } */
+/* { dg-final { scan-assembler "xsdivqp" } } */
+/* { dg-final { scan-assembler "xsmaddqp" } } */
+/* { dg-final { scan-assembler "xscmpuqp" } } */
===================================================================
@@ -0,0 +1,20 @@
+/* { dg-do compile { target { powerpc*-*-* && lp64 } } } */
+/* { dg-require-effective-target powerpc_p9modulo_ok } */
+/* { dg-skip-if "do not override -mcpu" { powerpc*-*-* } { "-mcpu=*" } { "-mcpu=power9" } } */
+/* { dg-options "-mcpu=power9 -O2" } */
+
+long
+s_madd (long a, long b, long c)
+{
+ return (a * b) + c;
+}
+
+unsigned long
+u_madd (unsigned long a, unsigned long b, unsigned long c)
+{
+ return (a * b) + c;
+}
+
+/* { dg-final { scan-assembler-times "maddld " 2 } } */
+/* { dg-final { scan-assembler-not "mulld " } } */
+/* { dg-final { scan-assembler-not "add " } } */