diff --git a/libsanitizer/Makefile.am b/libsanitizer/Makefile.am
index b28eb32..91e3434 100644
--- a/libsanitizer/Makefile.am
+++ b/libsanitizer/Makefile.am
@@ -1,3 +1,5 @@
+ACLOCAL_AMFLAGS = -I .. -I ../config
+
 SUBDIRS = interception sanitizer_common asan 
 
 # Work around what appears to be a GNU make bug handling MAKEFLAGS
diff --git a/libsanitizer/acinclude.m4 b/libsanitizer/acinclude.m4
new file mode 100644
index 0000000..7be603e
--- /dev/null
+++ b/libsanitizer/acinclude.m4
@@ -0,0 +1,10 @@
+dnl ----------------------------------------------------------------------
+dnl This whole bit snagged from libgfortran.
+
+sinclude(../libtool.m4)
+dnl The lines below arrange for aclocal not to bring an installed
+dnl libtool.m4 into aclocal.m4, while still arranging for automake to
+dnl add a definition of LIBTOOL to Makefile.in.
+ifelse(,,,[AC_SUBST(LIBTOOL)
+AC_DEFUN([AC_LIBTOOL_DLOPEN])
+])
diff --git a/libsanitizer/configure.ac b/libsanitizer/configure.ac
index 3f186c2..30cb6c1 100644
--- a/libsanitizer/configure.ac
+++ b/libsanitizer/configure.ac
@@ -1,11 +1,60 @@
 #                                               -*- Autoconf -*-
 # Process this file with autoconf to produce a configure script.
 
-AC_PREREQ([2.68])
+AC_PREREQ([2.64])
 AC_INIT(package-unused, version-unused, libsanitizer)
 AC_CONFIG_SRCDIR([include/sanitizer/common_interface_defs.h])
-AC_CONFIG_AUX_DIR(.)
+
+AC_MSG_CHECKING([for --enable-version-specific-runtime-libs])
+AC_ARG_ENABLE(version-specific-runtime-libs,
+[  --enable-version-specific-runtime-libs    Specify that runtime libraries should be installed in a compiler-specific directory ],
+[case "$enableval" in
+ yes) version_specific_libs=yes ;;
+ no)  version_specific_libs=no ;;
+ *)   AC_MSG_ERROR([Unknown argument to enable/disable version-specific libs]);;
+ esac],
+[version_specific_libs=no])
+AC_MSG_RESULT($version_specific_libs)
+
+# Do not delete or change the following two lines.  For why, see
+# http://gcc.gnu.org/ml/libstdc++/2003-07/msg00451.html
+AC_CANONICAL_SYSTEM
+
+target_alias=${target_alias-$host_alias}
+AC_SUBST(target_alias)
+
 AM_INIT_AUTOMAKE(foreign)
+AM_ENABLE_MULTILIB(, ..)
+
+# Calculate toolexeclibdir
+# Also toolexecdir, though it's only used in toolexeclibdir
+case ${version_specific_libs} in
+  yes)
+    # Need the gcc compiler version to know where to install libraries
+    # and header files if --enable-version-specific-runtime-libs option
+    # is selected.
+    toolexecdir='$(libdir)/gcc/$(target_alias)'
+    toolexeclibdir='$(toolexecdir)/$(gcc_version)$(MULTISUBDIR)'
+    ;;
+  no)
+    if test -n "$with_cross_host" &&
+       test x"$with_cross_host" != x"no"; then
+      # Install a library built with a cross compiler in tooldir, not libdir.
+      toolexecdir='$(exec_prefix)/$(target_alias)'
+      toolexeclibdir='$(toolexecdir)/lib'
+    else
+      toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
+      toolexeclibdir='$(libdir)'
+    fi
+    multi_os_directory=`$CC -print-multi-os-directory`
+    case $multi_os_directory in
+      .) ;; # Avoid trailing /.
+      *) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
+    esac
+    ;;
+esac
+AC_SUBST(toolexecdir)
+AC_SUBST(toolexeclibdir)
 
 # Checks for programs.
 AC_PROG_CC
@@ -18,15 +67,6 @@ AM_PROG_LIBTOOL
 AC_SUBST(enable_shared)
 AC_SUBST(enable_static)
 
-#AM_ENABLE_MULTILIB(, ..)
-target_alias=${target_alias-$host_alias}
-AC_SUBST(target_alias)
-
-toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
-toolexeclibdir='$(libdir)'
-AC_SUBST(toolexecdir)
-AC_SUBST(toolexeclibdir)
-
 AC_CONFIG_FILES([Makefile])
 
 AC_CONFIG_FILES(AC_FOREACH([DIR], [interception sanitizer_common asan], [DIR/Makefile ]),
diff --git a/libsanitizer/install-sh b/libsanitizer/install-sh
deleted file mode 100644
index a9244eb..0000000
--- a/libsanitizer/install-sh
+++ /dev/null
@@ -1,527 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2011-01-19.21; # UTC
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-nl='
-'
-IFS=" ""	$nl"
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit=${DOITPROG-}
-if test -z "$doit"; then
-  doit_exec=exec
-else
-  doit_exec=$doit
-fi
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-chgrpprog=${CHGRPPROG-chgrp}
-chmodprog=${CHMODPROG-chmod}
-chownprog=${CHOWNPROG-chown}
-cmpprog=${CMPPROG-cmp}
-cpprog=${CPPROG-cp}
-mkdirprog=${MKDIRPROG-mkdir}
-mvprog=${MVPROG-mv}
-rmprog=${RMPROG-rm}
-stripprog=${STRIPPROG-strip}
-
-posix_glob='?'
-initialize_posix_glob='
-  test "$posix_glob" != "?" || {
-    if (set -f) 2>/dev/null; then
-      posix_glob=
-    else
-      posix_glob=:
-    fi
-  }
-'
-
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chgrpcmd=
-chmodcmd=$chmodprog
-chowncmd=
-mvcmd=$mvprog
-rmcmd="$rmprog -f"
-stripcmd=
-
-src=
-dst=
-dir_arg=
-dst_arg=
-
-copy_on_change=false
-no_target_directory=
-
-usage="\
-Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
-     --help     display this help and exit.
-     --version  display version info and exit.
-
-  -c            (ignored)
-  -C            install only if different (preserve the last data modification time)
-  -d            create directories instead of installing files.
-  -g GROUP      $chgrpprog installed files to GROUP.
-  -m MODE       $chmodprog installed files to MODE.
-  -o USER       $chownprog installed files to USER.
-  -s            $stripprog installed files.
-  -t DIRECTORY  install into DIRECTORY.
-  -T            report an error if DSTFILE is a directory.
-
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
-  RMPROG STRIPPROG
-"
-
-while test $# -ne 0; do
-  case $1 in
-    -c) ;;
-
-    -C) copy_on_change=true;;
-
-    -d) dir_arg=true;;
-
-    -g) chgrpcmd="$chgrpprog $2"
-	shift;;
-
-    --help) echo "$usage"; exit $?;;
-
-    -m) mode=$2
-	case $mode in
-	  *' '* | *'	'* | *'
-'*	  | *'*'* | *'?'* | *'['*)
-	    echo "$0: invalid mode: $mode" >&2
-	    exit 1;;
-	esac
-	shift;;
-
-    -o) chowncmd="$chownprog $2"
-	shift;;
-
-    -s) stripcmd=$stripprog;;
-
-    -t) dst_arg=$2
-	# Protect names problematic for `test' and other utilities.
-	case $dst_arg in
-	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
-	esac
-	shift;;
-
-    -T) no_target_directory=true;;
-
-    --version) echo "$0 $scriptversion"; exit $?;;
-
-    --)	shift
-	break;;
-
-    -*)	echo "$0: invalid option: $1" >&2
-	exit 1;;
-
-    *)  break;;
-  esac
-  shift
-done
-
-if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
-  # When -d is used, all remaining arguments are directories to create.
-  # When -t is used, the destination is already specified.
-  # Otherwise, the last argument is the destination.  Remove it from $@.
-  for arg
-  do
-    if test -n "$dst_arg"; then
-      # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dst_arg"
-      shift # fnord
-    fi
-    shift # arg
-    dst_arg=$arg
-    # Protect names problematic for `test' and other utilities.
-    case $dst_arg in
-      -* | [=\(\)!]) dst_arg=./$dst_arg;;
-    esac
-  done
-fi
-
-if test $# -eq 0; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call `install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-
-if test -z "$dir_arg"; then
-  do_exit='(exit $ret); exit $ret'
-  trap "ret=129; $do_exit" 1
-  trap "ret=130; $do_exit" 2
-  trap "ret=141; $do_exit" 13
-  trap "ret=143; $do_exit" 15
-
-  # Set umask so as not to create temps with too-generous modes.
-  # However, 'strip' requires both read and write access to temps.
-  case $mode in
-    # Optimize common cases.
-    *644) cp_umask=133;;
-    *755) cp_umask=22;;
-
-    *[0-7])
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw='% 200'
-      fi
-      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
-    *)
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw=,u+rw
-      fi
-      cp_umask=$mode$u_plus_rw;;
-  esac
-fi
-
-for src
-do
-  # Protect names problematic for `test' and other utilities.
-  case $src in
-    -* | [=\(\)!]) src=./$src;;
-  esac
-
-  if test -n "$dir_arg"; then
-    dst=$src
-    dstdir=$dst
-    test -d "$dstdir"
-    dstdir_status=$?
-  else
-
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-
-    if test -z "$dst_arg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-    dst=$dst_arg
-
-    # If destination is a directory, append the input filename; won't work
-    # if double slashes aren't ignored.
-    if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-	echo "$0: $dst_arg: Is a directory" >&2
-	exit 1
-      fi
-      dstdir=$dst
-      dst=$dstdir/`basename "$src"`
-      dstdir_status=0
-    else
-      # Prefer dirname, but fall back on a substitute if dirname fails.
-      dstdir=`
-	(dirname "$dst") 2>/dev/null ||
-	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	     X"$dst" : 'X\(//\)[^/]' \| \
-	     X"$dst" : 'X\(//\)$' \| \
-	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
-	echo X"$dst" |
-	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)[^/].*/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\).*/{
-		   s//\1/
-		   q
-		 }
-		 s/.*/./; q'
-      `
-
-      test -d "$dstdir"
-      dstdir_status=$?
-    fi
-  fi
-
-  obsolete_mkdir_used=false
-
-  if test $dstdir_status != 0; then
-    case $posix_mkdir in
-      '')
-	# Create intermediate dirs using mode 755 as modified by the umask.
-	# This is like FreeBSD 'install' as of 1997-10-28.
-	umask=`umask`
-	case $stripcmd.$umask in
-	  # Optimize common cases.
-	  *[2367][2367]) mkdir_umask=$umask;;
-	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
-	  *[0-7])
-	    mkdir_umask=`expr $umask + 22 \
-	      - $umask % 100 % 40 + $umask % 20 \
-	      - $umask % 10 % 4 + $umask % 2
-	    `;;
-	  *) mkdir_umask=$umask,go-w;;
-	esac
-
-	# With -d, create the new directory with the user-specified mode.
-	# Otherwise, rely on $mkdir_umask.
-	if test -n "$dir_arg"; then
-	  mkdir_mode=-m$mode
-	else
-	  mkdir_mode=
-	fi
-
-	posix_mkdir=false
-	case $umask in
-	  *[123567][0-7][0-7])
-	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
-	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-	    ;;
-	  *)
-	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
-	    if (umask $mkdir_umask &&
-		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
-	    then
-	      if test -z "$dir_arg" || {
-		   # Check for POSIX incompatibilities with -m.
-		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writeable bit of parent directory when it shouldn't.
-		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
-		   case $ls_ld_tmpdir in
-		     d????-?r-*) different_mode=700;;
-		     d????-?--*) different_mode=755;;
-		     *) false;;
-		   esac &&
-		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
-		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
-		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-		   }
-		 }
-	      then posix_mkdir=:
-	      fi
-	      rmdir "$tmpdir/d" "$tmpdir"
-	    else
-	      # Remove any dirs left behind by ancient mkdir implementations.
-	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
-	    fi
-	    trap '' 0;;
-	esac;;
-    esac
-
-    if
-      $posix_mkdir && (
-	umask $mkdir_umask &&
-	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
-      )
-    then :
-    else
-
-      # The umask is ridiculous, or mkdir does not conform to POSIX,
-      # or it failed possibly due to a race condition.  Create the
-      # directory the slow way, step by step, checking for races as we go.
-
-      case $dstdir in
-	/*) prefix='/';;
-	[-=\(\)!]*) prefix='./';;
-	*)  prefix='';;
-      esac
-
-      eval "$initialize_posix_glob"
-
-      oIFS=$IFS
-      IFS=/
-      $posix_glob set -f
-      set fnord $dstdir
-      shift
-      $posix_glob set +f
-      IFS=$oIFS
-
-      prefixes=
-
-      for d
-      do
-	test X"$d" = X && continue
-
-	prefix=$prefix$d
-	if test -d "$prefix"; then
-	  prefixes=
-	else
-	  if $posix_mkdir; then
-	    (umask=$mkdir_umask &&
-	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-	    # Don't fail if two instances are running concurrently.
-	    test -d "$prefix" || exit 1
-	  else
-	    case $prefix in
-	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-	      *) qprefix=$prefix;;
-	    esac
-	    prefixes="$prefixes '$qprefix'"
-	  fi
-	fi
-	prefix=$prefix/
-      done
-
-      if test -n "$prefixes"; then
-	# Don't fail if two instances are running concurrently.
-	(umask $mkdir_umask &&
-	 eval "\$doit_exec \$mkdirprog $prefixes") ||
-	  test -d "$dstdir" || exit 1
-	obsolete_mkdir_used=true
-      fi
-    fi
-  fi
-
-  if test -n "$dir_arg"; then
-    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
-    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
-      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
-  else
-
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=$dstdir/_inst.$$_
-    rmtmp=$dstdir/_rm.$$_
-
-    # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
-    # Copy the file name to the temp name.
-    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
-    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
-    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
-    # If -C, don't bother to copy if it wouldn't change the file.
-    if $copy_on_change &&
-       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
-       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
-
-       eval "$initialize_posix_glob" &&
-       $posix_glob set -f &&
-       set X $old && old=:$2:$4:$5:$6 &&
-       set X $new && new=:$2:$4:$5:$6 &&
-       $posix_glob set +f &&
-
-       test "$old" = "$new" &&
-       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
-    then
-      rm -f "$dsttmp"
-    else
-      # Rename the file to the real destination.
-      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
-
-      # The rename failed, perhaps because mv can't rename something else
-      # to itself, or perhaps because mv is so ancient that it does not
-      # support -f.
-      {
-	# Now remove or move aside any old file at destination location.
-	# We try this two ways since rm can't unlink itself on some
-	# systems and the destination file might be busy for other
-	# reasons.  In this case, the final cleanup might fail but the new
-	# file should still install successfully.
-	{
-	  test ! -f "$dst" ||
-	  $doit $rmcmd -f "$dst" 2>/dev/null ||
-	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
-	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
-	  } ||
-	  { echo "$0: cannot unlink or rename $dst" >&2
-	    (exit 1); exit 1
-	  }
-	} &&
-
-	# Now rename the file to the real destination.
-	$doit $mvcmd "$dsttmp" "$dst"
-      }
-    fi || exit 1
-
-    trap '' 0
-  fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
-# time-stamp-end: "; # UTC"
-# End:
