[05/13] remove sdb/coff info from docs

diff --git a/gcc/doc/install.texi b/gcc/doc/install.texi
index da360da..9974775 100644
--- a/gcc/doc/install.texi
+++ b/gcc/doc/install.texi
@@ -1007,31 +1007,6 @@  Specify that stabs debugging
 information should be used instead of whatever format the host normally
 uses.  Normally GCC uses the same debug format as the host system.
 
-On MIPS based systems and on Alphas, you must specify whether you want
-GCC to create the normal ECOFF debugging format, or to use BSD-style
-stabs passed through the ECOFF symbol table.  The normal ECOFF debug
-format cannot fully handle languages other than C@.  BSD stabs format can
-handle other languages, but it only works with the GNU debugger GDB@.
-
-Normally, GCC uses the ECOFF debugging format by default; if you
-prefer BSD stabs, specify @option{--with-stabs} when you configure GCC@.
-
-No matter which default you choose when you configure GCC, the user
-can use the @option{-gcoff} and @option{-gstabs+} options to specify explicitly
-the debug format for a particular compilation.
-
-@option{--with-stabs} is meaningful on the ISC system on the 386, also, if
-@option{--with-gas} is used.  It selects use of stabs debugging
-information embedded in COFF output.  This kind of debugging information
-supports C++ well; ordinary COFF debugging information does not.
-
-@option{--with-stabs} is also meaningful on 386 systems running SVR4.  It
-selects use of stabs debugging information embedded in ELF output.  The
-C++ compiler currently (2.6.0) does not support the DWARF debugging
-information normally used on 386 SVR4 platforms; stabs provide a
-workable alternative.  This requires gas and gdb, as the normal SVR4
-tools can not generate or interpret stabs.
-
 @item --with-tls=@var{dialect}
 Specify the default TLS dialect, for systems were there is a choice.
 For ARM targets, possible values for @var{dialect} are @code{gnu} or
diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
index 3a87956..41040c1 100644
--- a/gcc/doc/invoke.texi
+++ b/gcc/doc/invoke.texi
@@ -45,7 +45,7 @@  remainder.  @command{g++} accepts mostly the same options as @command{gcc}.
 @c man end
 @c man begin SEEALSO
 gpl(7), gfdl(7), fsf-funding(7),
-cpp(1), gcov(1), as(1), ld(1), gdb(1), adb(1), dbx(1), sdb(1)
+cpp(1), gcov(1), as(1), ld(1), gdb(1), dbx(1)
 and the Info entries for @file{gcc}, @file{cpp}, @file{as},
 @file{ld}, @file{binutils} and @file{gdb}.
 @c man end
@@ -342,7 +342,7 @@  Objective-C and Objective-C++ Dialects}.
 
 @item Debugging Options
 @xref{Debugging Options,,Options for Debugging Your Program}.
-@gccoptlist{-g  -g@var{level}  -gcoff  -gdwarf  -gdwarf-@var{version} @gol
+@gccoptlist{-g  -g@var{level}  -gdwarf  -gdwarf-@var{version} @gol
 -ggdb  -grecord-gcc-switches  -gno-record-gcc-switches @gol
 -gstabs  -gstabs+  -gstrict-dwarf  -gno-strict-dwarf @gol
 -gcolumn-info  -gno-column-info @gol
@@ -6895,7 +6895,7 @@  in their names, but apply to all currently-supported versions of DWARF.
 Produce debugging information in stabs format (if that is supported),
 without GDB extensions.  This is the format used by DBX on most BSD
 systems.  On MIPS, Alpha and System V Release 4 systems this option
-produces stabs debugging output that is not understood by DBX or SDB@.
+produces stabs debugging output that is not understood by DBX@.
 On System V Release 4 systems this option requires the GNU assembler.
 
 @item -gstabs+
@@ -6905,12 +6905,6 @@  using GNU extensions understood only by the GNU debugger (GDB)@.  The
 use of these extensions is likely to make other debuggers crash or
 refuse to read the program.
 
-@item -gcoff
-@opindex gcoff
-Produce debugging information in COFF format (if that is supported).
-This is the format used by SDB on most System V systems prior to
-System V Release 4.
-
 @item -gxcoff
 @opindex gxcoff
 Produce debugging information in XCOFF format (if that is supported).
@@ -6932,7 +6926,6 @@  supported).  This is the format used by DEBUG on Alpha/VMS systems.
 @item -g@var{level}
 @itemx -ggdb@var{level}
 @itemx -gstabs@var{level}
-@itemx -gcoff@var{level}
 @itemx -gxcoff@var{level}
 @itemx -gvms@var{level}
 Request debugging information and also use @var{level} to specify how
diff --git a/gcc/doc/passes.texi b/gcc/doc/passes.texi
index 93e70ee..2bf786c 100644
--- a/gcc/doc/passes.texi
+++ b/gcc/doc/passes.texi
@@ -981,11 +981,10 @@  these files.
 
 This is run after final because it must output the stack slot offsets
 for pseudo registers that did not get hard registers.  Source files
-are @file{dbxout.c} for DBX symbol table format, @file{sdbout.c} for
-SDB symbol table format, @file{dwarfout.c} for DWARF symbol table
-format, files @file{dwarf2out.c} and @file{dwarf2asm.c} for DWARF2
-symbol table format, and @file{vmsdbgout.c} for VMS debug symbol table
-format.
+are @file{dbxout.c} for DBX symbol table format, @file{dwarfout.c} for
+DWARF symbol table format, files @file{dwarf2out.c} and @file{dwarf2asm.c}
+for DWARF2 symbol table format, and @file{vmsdbgout.c} for VMS debug
+symbol table format.
 
 @end itemize
 
diff --git a/gcc/doc/tm.texi b/gcc/doc/tm.texi
index 8484c1d..4f2ecff 100644
--- a/gcc/doc/tm.texi
+++ b/gcc/doc/tm.texi
@@ -7692,7 +7692,7 @@  for the file format in use is appropriate.
 @end defmac
 
 @deftypefn {Target Hook} void TARGET_ASM_OUTPUT_SOURCE_FILENAME (FILE *@var{file}, const char *@var{name})
-Output COFF information or DWARF debugging information which indicates that filename @var{name} is the current source file to the stdio stream @var{file}.
+Output DWARF debugging information which indicates that filename @var{name} is the current source file to the stdio stream @var{file}.
  
  This target hook need not be defined if the standard form of output for the file format in use is appropriate.
 @end deftypefn
@@ -9340,7 +9340,7 @@  This macro need only be defined if the target might save registers in the
 function prologue at an offset to the stack pointer that is not aligned to
 @code{UNITS_PER_WORD}.  The definition should be the negative minimum
 alignment if @code{STACK_GROWS_DOWNWARD} is true, and the positive
-minimum alignment otherwise.  @xref{SDB and DWARF}.  Only applicable if
+minimum alignment otherwise.  @xref{DWARF}.  Only applicable if
 the target supports DWARF 2 frame unwind information.
 @end defmac
 
@@ -9514,7 +9514,7 @@  This describes how to specify debugging information.
 * DBX Options::        Macros enabling specific options in DBX format.
 * DBX Hooks::          Hook macros for varying DBX format.
 * File Names and DBX:: Macros controlling output of file names in DBX format.
-* SDB and DWARF::      Macros for SDB (COFF) and DWARF formats.
+* DWARF::              Macros for DWARF format.
 * VMS Debug::          Macros for VMS debug format.
 @end menu
 
@@ -9548,9 +9548,8 @@  A C expression that returns the integer offset value for an automatic
 variable having address @var{x} (an RTL expression).  The default
 computation assumes that @var{x} is based on the frame-pointer and
 gives the offset from the frame-pointer.  This is required for targets
-that produce debugging output for DBX or COFF-style debugging output
-for SDB and allow the frame-pointer to be eliminated when the
-@option{-g} options is used.
+that produce debugging output for DBX and allow the frame-pointer to be
+eliminated when the @option{-g} option is used.
 @end defmac
 
 @defmac DEBUGGER_ARG_OFFSET (@var{offset}, @var{x})
@@ -9564,7 +9563,7 @@  A C expression that returns the type of debugging output GCC should
 produce when the user specifies just @option{-g}.  Define
 this if you have arranged for GCC to support more than one format of
 debugging output.  Currently, the allowable values are @code{DBX_DEBUG},
-@code{SDB_DEBUG}, @code{DWARF_DEBUG}, @code{DWARF2_DEBUG},
+@code{DWARF_DEBUG}, @code{DWARF2_DEBUG},
 @code{XCOFF_DEBUG}, @code{VMS_DEBUG}, and @code{VMS_AND_DWARF2_DEBUG}.
 
 When the user specifies @option{-ggdb}, GCC normally also uses the
@@ -9575,7 +9574,7 @@  defined, GCC uses @code{DBX_DEBUG}.
 
 The value of this macro only affects the default debugging output; the
 user can always get a specific type of output by using @option{-gstabs},
-@option{-gcoff}, @option{-gdwarf-2}, @option{-gxcoff}, or @option{-gvms}.
+@option{-gdwarf-2}, @option{-gxcoff}, or @option{-gvms}.
 @end defmac
 
 @node DBX Options
@@ -9793,16 +9792,11 @@  whose value is the highest absolute text address in the file.
 @end defmac
 
 @need 2000
-@node SDB and DWARF
-@subsection Macros for SDB and DWARF Output
+@node DWARF
+@subsection Macros for DWARF Output
 
 @c prevent bad page break with this line
-Here are macros for SDB and DWARF output.
-
-@defmac SDB_DEBUGGING_INFO
-Define this macro to 1 if GCC should produce COFF-style debugging output
-for SDB in response to the @option{-g} option.
-@end defmac
+Here are macros for DWARF output.
 
 @defmac DWARF2_DEBUGGING_INFO
 Define this macro if GCC should produce dwarf version 2 format
@@ -9908,40 +9902,6 @@  If defined, this target hook is a function which outputs a DTP-relative
 reference to the given TLS symbol of the specified size.
 @end deftypefn
 
-@defmac PUT_SDB_@dots{}
-Define these macros to override the assembler syntax for the special
-SDB assembler directives.  See @file{sdbout.c} for a list of these
-macros and their arguments.  If the standard syntax is used, you need
-not define them yourself.
-@end defmac
-
-@defmac SDB_DELIM
-Some assemblers do not support a semicolon as a delimiter, even between
-SDB assembler directives.  In that case, define this macro to be the
-delimiter to use (usually @samp{\n}).  It is not necessary to define
-a new set of @code{PUT_SDB_@var{op}} macros if this is the only change
-required.
-@end defmac
-
-@defmac SDB_ALLOW_UNKNOWN_REFERENCES
-Define this macro to allow references to unknown structure,
-union, or enumeration tags to be emitted.  Standard COFF does not
-allow handling of unknown references, MIPS ECOFF has support for
-it.
-@end defmac
-
-@defmac SDB_ALLOW_FORWARD_REFERENCES
-Define this macro to allow references to structure, union, or
-enumeration tags that have not yet been seen to be handled.  Some
-assemblers choke if forward tags are used, while some require it.
-@end defmac
-
-@defmac SDB_OUTPUT_SOURCE_LINE (@var{stream}, @var{line})
-A C statement to output SDB debugging information before code for line
-number @var{line} of the current source file to the stdio stream
-@var{stream}.  The default is to emit an @code{.ln} directive.
-@end defmac
-
 @need 2000
 @node VMS Debug
 @subsection Macros for VMS Debug Format
diff --git a/gcc/doc/tm.texi.in b/gcc/doc/tm.texi.in
index 015f59e..a00c2c8f 100644
--- a/gcc/doc/tm.texi.in
+++ b/gcc/doc/tm.texi.in
@@ -6448,7 +6448,7 @@  This macro need only be defined if the target might save registers in the
 function prologue at an offset to the stack pointer that is not aligned to
 @code{UNITS_PER_WORD}.  The definition should be the negative minimum
 alignment if @code{STACK_GROWS_DOWNWARD} is true, and the positive
-minimum alignment otherwise.  @xref{SDB and DWARF}.  Only applicable if
+minimum alignment otherwise.  @xref{DWARF}.  Only applicable if
 the target supports DWARF 2 frame unwind information.
 @end defmac
 
@@ -6572,7 +6572,7 @@  This describes how to specify debugging information.
 * DBX Options::        Macros enabling specific options in DBX format.
 * DBX Hooks::          Hook macros for varying DBX format.
 * File Names and DBX:: Macros controlling output of file names in DBX format.
-* SDB and DWARF::      Macros for SDB (COFF) and DWARF formats.
+* DWARF::              Macros for DWARF format.
 * VMS Debug::          Macros for VMS debug format.
 @end menu
 
@@ -6606,9 +6606,8 @@  A C expression that returns the integer offset value for an automatic
 variable having address @var{x} (an RTL expression).  The default
 computation assumes that @var{x} is based on the frame-pointer and
 gives the offset from the frame-pointer.  This is required for targets
-that produce debugging output for DBX or COFF-style debugging output
-for SDB and allow the frame-pointer to be eliminated when the
-@option{-g} options is used.
+that produce debugging output for DBX and allow the frame-pointer to be
+eliminated when the @option{-g} option is used.
 @end defmac
 
 @defmac DEBUGGER_ARG_OFFSET (@var{offset}, @var{x})
@@ -6622,7 +6621,7 @@  A C expression that returns the type of debugging output GCC should
 produce when the user specifies just @option{-g}.  Define
 this if you have arranged for GCC to support more than one format of
 debugging output.  Currently, the allowable values are @code{DBX_DEBUG},
-@code{SDB_DEBUG}, @code{DWARF_DEBUG}, @code{DWARF2_DEBUG},
+@code{DWARF_DEBUG}, @code{DWARF2_DEBUG},
 @code{XCOFF_DEBUG}, @code{VMS_DEBUG}, and @code{VMS_AND_DWARF2_DEBUG}.
 
 When the user specifies @option{-ggdb}, GCC normally also uses the
@@ -6633,7 +6632,7 @@  defined, GCC uses @code{DBX_DEBUG}.
 
 The value of this macro only affects the default debugging output; the
 user can always get a specific type of output by using @option{-gstabs},
-@option{-gcoff}, @option{-gdwarf-2}, @option{-gxcoff}, or @option{-gvms}.
+@option{-gdwarf-2}, @option{-gxcoff}, or @option{-gvms}.
 @end defmac
 
 @node DBX Options
@@ -6851,16 +6850,11 @@  whose value is the highest absolute text address in the file.
 @end defmac
 
 @need 2000
-@node SDB and DWARF
-@subsection Macros for SDB and DWARF Output
+@node DWARF
+@subsection Macros for DWARF Output
 
 @c prevent bad page break with this line
-Here are macros for SDB and DWARF output.
-
-@defmac SDB_DEBUGGING_INFO
-Define this macro to 1 if GCC should produce COFF-style debugging output
-for SDB in response to the @option{-g} option.
-@end defmac
+Here are macros for DWARF output.
 
 @defmac DWARF2_DEBUGGING_INFO
 Define this macro if GCC should produce dwarf version 2 format
@@ -6936,40 +6930,6 @@  is referenced by a function.
 
 @hook TARGET_ASM_OUTPUT_DWARF_DTPREL
 
-@defmac PUT_SDB_@dots{}
-Define these macros to override the assembler syntax for the special
-SDB assembler directives.  See @file{sdbout.c} for a list of these
-macros and their arguments.  If the standard syntax is used, you need
-not define them yourself.
-@end defmac
-
-@defmac SDB_DELIM
-Some assemblers do not support a semicolon as a delimiter, even between
-SDB assembler directives.  In that case, define this macro to be the
-delimiter to use (usually @samp{\n}).  It is not necessary to define
-a new set of @code{PUT_SDB_@var{op}} macros if this is the only change
-required.
-@end defmac
-
-@defmac SDB_ALLOW_UNKNOWN_REFERENCES
-Define this macro to allow references to unknown structure,
-union, or enumeration tags to be emitted.  Standard COFF does not
-allow handling of unknown references, MIPS ECOFF has support for
-it.
-@end defmac
-
-@defmac SDB_ALLOW_FORWARD_REFERENCES
-Define this macro to allow references to structure, union, or
-enumeration tags that have not yet been seen to be handled.  Some
-assemblers choke if forward tags are used, while some require it.
-@end defmac
-
-@defmac SDB_OUTPUT_SOURCE_LINE (@var{stream}, @var{line})
-A C statement to output SDB debugging information before code for line
-number @var{line} of the current source file to the stdio stream
-@var{stream}.  The default is to emit an @code{.ln} directive.
-@end defmac
-
 @need 2000
 @node VMS Debug
 @subsection Macros for VMS Debug Format
diff --git a/gcc/fortran/invoke.texi b/gcc/fortran/invoke.texi
index 8892d50..261f253 100644
--- a/gcc/fortran/invoke.texi
+++ b/gcc/fortran/invoke.texi
@@ -41,7 +41,7 @@  remainder.
 @c man end
 @c man begin SEEALSO
 gpl(7), gfdl(7), fsf-funding(7),
-cpp(1), gcov(1), gcc(1), as(1), ld(1), gdb(1), adb(1), dbx(1), sdb(1)
+cpp(1), gcov(1), gcc(1), as(1), ld(1), gdb(1), dbx(1)
 and the Info entries for @file{gcc}, @file{cpp}, @file{gfortran}, @file{as},
 @file{ld}, @file{binutils} and @file{gdb}.
 @c man end
diff --git a/gcc/target.def b/gcc/target.def
index b7dda5b..805353e 100644
--- a/gcc/target.def
+++ b/gcc/target.def
@@ -876,9 +876,8 @@  to generate it on the spot.",
 
 DEFHOOK
 (output_source_filename,
- "Output COFF information or DWARF debugging information which indicates\
- that filename @var{name} is the current source file to the stdio\
- stream @var{file}.\n\
+ "Output DWARF debugging information which indicates that filename\
+ @var{name} is the current source file to the stdio stream @var{file}.\n\
  \n\
  This target hook need not be defined if the standard form of output\
  for the file format in use is appropriate.",