Message ID | 1365105379-16725-1-git-send-email-rep.dot.nop@gmail.com |
---|---|
State | New |
Headers | show |
Except as noted below, fine by me. On 04/04/13 12:56, Bernhard Reutner-Fischer wrote: > Bootstrapped and regtested on x86_64-unknown-linux-gnu and > x86_64-mine-linux-uclibc without regressions, ok for trunk? > > fixincludes/ChangeLog: > > 2013-04-04 Bernhard Reutner-Fischer <aldot@gcc.gnu.org> > > Makefile.in: Use $(FI) instead of fixincl@EXEEXT@. > Cleanup whitespace while at it. > > Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> > --- > fixincludes/Makefile.in | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) > > diff --git a/fixincludes/Makefile.in b/fixincludes/Makefile.in > index ce850ff..3dc869d 100644 > --- a/fixincludes/Makefile.in > +++ b/fixincludes/Makefile.in > @@ -131,7 +131,7 @@ fixinc.sh : fixinc.in mkfixinc.sh Makefile > $(srcdir)/fixincl.x: @MAINT@ fixincl.tpl inclhack.def > cd $(srcdir) ; $(SHELL) ./genfixes > > -mostlyclean : > +mostlyclean: I see no reason for changing things. But if you are going to "clean up" the colons, then they should be in columns (mostly 12 or 16). This one is already in 12. > rm -f *.o *-stamp $(AF) $(FI) *~ fixinc.sh > > clean: mostlyclean > @@ -179,18 +179,18 @@ check : all > > install : all > -rm -rf $(DESTDIR)$(itoolsdir) > - $(mkinstalldirs) $(DESTDIR)$(itoolsdir) > + $(mkinstalldirs) $(DESTDIR)$(itoolsdir) > $(mkinstalldirs) $(DESTDIR)$(itoolsdatadir)/include > $(INSTALL_DATA) $(srcdir)/README-fixinc \ > $(DESTDIR)$(itoolsdatadir)/include/README > $(INSTALL_SCRIPT) fixinc.sh $(DESTDIR)$(itoolsdir)/fixinc.sh > - $(INSTALL_PROGRAM) fixincl@EXEEXT@ \ > - $(DESTDIR)$(itoolsdir)/fixincl@EXEEXT@ > + $(INSTALL_PROGRAM) $(FI) \ > + $(DESTDIR)$(itoolsdir)/$(FI) This should now fit on a single line. > $(INSTALL_SCRIPT) mkheaders $(DESTDIR)$(itoolsdir)/mkheaders > > install-strip: install > test -z '$(STRIP)' \ > - || $(STRIP) $(DESTDIR)$(itoolsdir)/fixincl@EXEEXT@ > + || $(STRIP) $(DESTDIR)$(itoolsdir)/$(FI) > > .PHONY: all check install install-strip > .PHONY: dvi pdf info html install-pdf install-info install-html
On 4 April 2013 22:20, Bruce Korb <bkorb@gnu.org> wrote: > Except as noted below, fine by me. > > On 04/04/13 12:56, Bernhard Reutner-Fischer wrote: >> Bootstrapped and regtested on x86_64-unknown-linux-gnu and >> x86_64-mine-linux-uclibc without regressions, ok for trunk? >> >> fixincludes/ChangeLog: >> >> 2013-04-04 Bernhard Reutner-Fischer <aldot@gcc.gnu.org> >> >> Makefile.in: Use $(FI) instead of fixincl@EXEEXT@. >> Cleanup whitespace while at it. >> >> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> >> --- >> fixincludes/Makefile.in | 10 +++++----- >> 1 file changed, 5 insertions(+), 5 deletions(-) >> >> diff --git a/fixincludes/Makefile.in b/fixincludes/Makefile.in >> index ce850ff..3dc869d 100644 >> --- a/fixincludes/Makefile.in >> +++ b/fixincludes/Makefile.in >> @@ -131,7 +131,7 @@ fixinc.sh : fixinc.in mkfixinc.sh Makefile >> $(srcdir)/fixincl.x: @MAINT@ fixincl.tpl inclhack.def >> cd $(srcdir) ; $(SHELL) ./genfixes >> >> -mostlyclean : >> +mostlyclean: > > I see no reason for changing things. dropped this hunk. > But if you are going to "clean up" the colons, then they should > be in columns (mostly 12 or 16). This one is already in 12. > >> rm -f *.o *-stamp $(AF) $(FI) *~ fixinc.sh >> >> clean: mostlyclean >> @@ -179,18 +179,18 @@ check : all >> >> install : all >> -rm -rf $(DESTDIR)$(itoolsdir) >> - $(mkinstalldirs) $(DESTDIR)$(itoolsdir) >> + $(mkinstalldirs) $(DESTDIR)$(itoolsdir) >> $(mkinstalldirs) $(DESTDIR)$(itoolsdatadir)/include >> $(INSTALL_DATA) $(srcdir)/README-fixinc \ >> $(DESTDIR)$(itoolsdatadir)/include/README >> $(INSTALL_SCRIPT) fixinc.sh $(DESTDIR)$(itoolsdir)/fixinc.sh >> - $(INSTALL_PROGRAM) fixincl@EXEEXT@ \ >> - $(DESTDIR)$(itoolsdir)/fixincl@EXEEXT@ >> + $(INSTALL_PROGRAM) $(FI) \ >> + $(DESTDIR)$(itoolsdir)/$(FI) > > This should now fit on a single line. ok > >> $(INSTALL_SCRIPT) mkheaders $(DESTDIR)$(itoolsdir)/mkheaders >> >> install-strip: install >> test -z '$(STRIP)' \ >> - || $(STRIP) $(DESTDIR)$(itoolsdir)/fixincl@EXEEXT@ >> + || $(STRIP) $(DESTDIR)$(itoolsdir)/$(FI) changed this too to be on a single line now. >> >> .PHONY: all check install install-strip >> .PHONY: dvi pdf info html install-pdf install-info install-html Changelog remains the same. II was using the attached updated patch since April, ok for trunk?
Sure. Looks good to me. Thanks On Fri, Nov 8, 2013 at 2:57 AM, Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> wrote: > On 4 April 2013 22:20, Bruce Korb <bkorb@gnu.org> wrote: >> Except as noted below, fine by me. >> >> On 04/04/13 12:56, Bernhard Reutner-Fischer wrote: >>> Bootstrapped and regtested on x86_64-unknown-linux-gnu and >>> x86_64-mine-linux-uclibc without regressions, ok for trunk? >>> >>> fixincludes/ChangeLog: >>> >>> 2013-04-04 Bernhard Reutner-Fischer <aldot@gcc.gnu.org> >>> >>> Makefile.in: Use $(FI) instead of fixincl@EXEEXT@. >>> Cleanup whitespace while at it. >>> >>> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> >>> --- >>> fixincludes/Makefile.in | 10 +++++----- >>> 1 file changed, 5 insertions(+), 5 deletions(-) >>> >>> diff --git a/fixincludes/Makefile.in b/fixincludes/Makefile.in >>> index ce850ff..3dc869d 100644 >>> --- a/fixincludes/Makefile.in >>> +++ b/fixincludes/Makefile.in >>> @@ -131,7 +131,7 @@ fixinc.sh : fixinc.in mkfixinc.sh Makefile >>> $(srcdir)/fixincl.x: @MAINT@ fixincl.tpl inclhack.def >>> cd $(srcdir) ; $(SHELL) ./genfixes >>> >>> -mostlyclean : >>> +mostlyclean: >> >> I see no reason for changing things. > > dropped this hunk. > >> But if you are going to "clean up" the colons, then they should >> be in columns (mostly 12 or 16). This one is already in 12. >> >>> rm -f *.o *-stamp $(AF) $(FI) *~ fixinc.sh >>> >>> clean: mostlyclean >>> @@ -179,18 +179,18 @@ check : all >>> >>> install : all >>> -rm -rf $(DESTDIR)$(itoolsdir) >>> - $(mkinstalldirs) $(DESTDIR)$(itoolsdir) >>> + $(mkinstalldirs) $(DESTDIR)$(itoolsdir) >>> $(mkinstalldirs) $(DESTDIR)$(itoolsdatadir)/include >>> $(INSTALL_DATA) $(srcdir)/README-fixinc \ >>> $(DESTDIR)$(itoolsdatadir)/include/README >>> $(INSTALL_SCRIPT) fixinc.sh $(DESTDIR)$(itoolsdir)/fixinc.sh >>> - $(INSTALL_PROGRAM) fixincl@EXEEXT@ \ >>> - $(DESTDIR)$(itoolsdir)/fixincl@EXEEXT@ >>> + $(INSTALL_PROGRAM) $(FI) \ >>> + $(DESTDIR)$(itoolsdir)/$(FI) >> >> This should now fit on a single line. > > ok >> >>> $(INSTALL_SCRIPT) mkheaders $(DESTDIR)$(itoolsdir)/mkheaders >>> >>> install-strip: install >>> test -z '$(STRIP)' \ >>> - || $(STRIP) $(DESTDIR)$(itoolsdir)/fixincl@EXEEXT@ >>> + || $(STRIP) $(DESTDIR)$(itoolsdir)/$(FI) > > changed this too to be on a single line now. >>> >>> .PHONY: all check install install-strip >>> .PHONY: dvi pdf info html install-pdf install-info install-html > > Changelog remains the same. > II was using the attached updated patch since April, ok for trunk?
On 8 November 2013 17:28, Bruce Korb <bkorb@gnu.org> wrote: > Sure. Looks good to me. Thanks pushed as r206146 thanks, > > On Fri, Nov 8, 2013 at 2:57 AM, Bernhard Reutner-Fischer > <rep.dot.nop@gmail.com> wrote: >> On 4 April 2013 22:20, Bruce Korb <bkorb@gnu.org> wrote: >>> Except as noted below, fine by me. >>> >>> On 04/04/13 12:56, Bernhard Reutner-Fischer wrote: >>>> Bootstrapped and regtested on x86_64-unknown-linux-gnu and >>>> x86_64-mine-linux-uclibc without regressions, ok for trunk? >>>> >>>> fixincludes/ChangeLog: >>>> >>>> 2013-04-04 Bernhard Reutner-Fischer <aldot@gcc.gnu.org> >>>> >>>> Makefile.in: Use $(FI) instead of fixincl@EXEEXT@. >>>> Cleanup whitespace while at it. >>>> >>>> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> >>>> --- >>>> fixincludes/Makefile.in | 10 +++++----- >>>> 1 file changed, 5 insertions(+), 5 deletions(-) >>>> >>>> diff --git a/fixincludes/Makefile.in b/fixincludes/Makefile.in >>>> index ce850ff..3dc869d 100644 >>>> --- a/fixincludes/Makefile.in >>>> +++ b/fixincludes/Makefile.in >>>> @@ -131,7 +131,7 @@ fixinc.sh : fixinc.in mkfixinc.sh Makefile >>>> $(srcdir)/fixincl.x: @MAINT@ fixincl.tpl inclhack.def >>>> cd $(srcdir) ; $(SHELL) ./genfixes >>>> >>>> -mostlyclean : >>>> +mostlyclean: >>> >>> I see no reason for changing things. >> >> dropped this hunk. >> >>> But if you are going to "clean up" the colons, then they should >>> be in columns (mostly 12 or 16). This one is already in 12. >>> >>>> rm -f *.o *-stamp $(AF) $(FI) *~ fixinc.sh >>>> >>>> clean: mostlyclean >>>> @@ -179,18 +179,18 @@ check : all >>>> >>>> install : all >>>> -rm -rf $(DESTDIR)$(itoolsdir) >>>> - $(mkinstalldirs) $(DESTDIR)$(itoolsdir) >>>> + $(mkinstalldirs) $(DESTDIR)$(itoolsdir) >>>> $(mkinstalldirs) $(DESTDIR)$(itoolsdatadir)/include >>>> $(INSTALL_DATA) $(srcdir)/README-fixinc \ >>>> $(DESTDIR)$(itoolsdatadir)/include/README >>>> $(INSTALL_SCRIPT) fixinc.sh $(DESTDIR)$(itoolsdir)/fixinc.sh >>>> - $(INSTALL_PROGRAM) fixincl@EXEEXT@ \ >>>> - $(DESTDIR)$(itoolsdir)/fixincl@EXEEXT@ >>>> + $(INSTALL_PROGRAM) $(FI) \ >>>> + $(DESTDIR)$(itoolsdir)/$(FI) >>> >>> This should now fit on a single line. >> >> ok >>> >>>> $(INSTALL_SCRIPT) mkheaders $(DESTDIR)$(itoolsdir)/mkheaders >>>> >>>> install-strip: install >>>> test -z '$(STRIP)' \ >>>> - || $(STRIP) $(DESTDIR)$(itoolsdir)/fixincl@EXEEXT@ >>>> + || $(STRIP) $(DESTDIR)$(itoolsdir)/$(FI) >> >> changed this too to be on a single line now. >>>> >>>> .PHONY: all check install install-strip >>>> .PHONY: dvi pdf info html install-pdf install-info install-html >> >> Changelog remains the same. >> II was using the attached updated patch since April, ok for trunk?
diff --git a/fixincludes/Makefile.in b/fixincludes/Makefile.in index ce850ff..3dc869d 100644 --- a/fixincludes/Makefile.in +++ b/fixincludes/Makefile.in @@ -131,7 +131,7 @@ fixinc.sh : fixinc.in mkfixinc.sh Makefile $(srcdir)/fixincl.x: @MAINT@ fixincl.tpl inclhack.def cd $(srcdir) ; $(SHELL) ./genfixes -mostlyclean : +mostlyclean: rm -f *.o *-stamp $(AF) $(FI) *~ fixinc.sh clean: mostlyclean @@ -179,18 +179,18 @@ check : all install : all -rm -rf $(DESTDIR)$(itoolsdir) - $(mkinstalldirs) $(DESTDIR)$(itoolsdir) + $(mkinstalldirs) $(DESTDIR)$(itoolsdir) $(mkinstalldirs) $(DESTDIR)$(itoolsdatadir)/include $(INSTALL_DATA) $(srcdir)/README-fixinc \ $(DESTDIR)$(itoolsdatadir)/include/README $(INSTALL_SCRIPT) fixinc.sh $(DESTDIR)$(itoolsdir)/fixinc.sh - $(INSTALL_PROGRAM) fixincl@EXEEXT@ \ - $(DESTDIR)$(itoolsdir)/fixincl@EXEEXT@ + $(INSTALL_PROGRAM) $(FI) \ + $(DESTDIR)$(itoolsdir)/$(FI) $(INSTALL_SCRIPT) mkheaders $(DESTDIR)$(itoolsdir)/mkheaders install-strip: install test -z '$(STRIP)' \ - || $(STRIP) $(DESTDIR)$(itoolsdir)/fixincl@EXEEXT@ + || $(STRIP) $(DESTDIR)$(itoolsdir)/$(FI) .PHONY: all check install install-strip .PHONY: dvi pdf info html install-pdf install-info install-html
Bootstrapped and regtested on x86_64-unknown-linux-gnu and x86_64-mine-linux-uclibc without regressions, ok for trunk? fixincludes/ChangeLog: 2013-04-04 Bernhard Reutner-Fischer <aldot@gcc.gnu.org> Makefile.in: Use $(FI) instead of fixincl@EXEEXT@. Cleanup whitespace while at it. Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> --- fixincludes/Makefile.in | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)