diff --git a/arg-show-tests-full-0001/arg-show-tests-full-0001.log b/arg-show-tests-full-0001/arg-show-tests-full-0001.log
index 431c2b4..4b811fd 100644
--- a/arg-show-tests-full-0001/arg-show-tests-full-0001.log
+++ b/arg-show-tests-full-0001/arg-show-tests-full-0001.log
@@ -1,58 +1,59 @@
 Batch tests:
- acpiinfo      (3 tests):
+ acpiinfo        (3 tests):
   Determine Kernel ACPI version.
   Determine machines ACPI version.
   Determine AML compiler.
- acpitables    (1 test):
+ acpitables      (1 test):
   Check ACPI tables.
- apicedge      (1 test):
+ apicedge        (1 test):
   Legacy and PCI Interrupt Edge/Level trigger checks.
- apicinstance  (1 test):
+ apicinstance    (1 test):
   Check single instance of APIC/MADT table.
- aspm          (2 tests):
+ aspm            (2 tests):
   PCIe ASPM ACPI test.
   PCIe ASPM registers test.
- bios32        (1 test):
+ bios32          (1 test):
   Check BIOS32 Service Directory.
- bios_info     (1 test):
+ bios_info       (1 test):
   Gather BIOS DMI information
- checksum      (1 test):
+ checksum        (1 test):
   Check ACPI table checksums.
- cpufreq       (1 test):
+ cpufreq         (1 test):
   CPU P-State Checks.
- crs           (1 test):
+ crs             (1 test):
   Check PCI host bridge configuration using _CRS.
- csm           (1 test):
+ csm             (1 test):
   Check for UEFI Compatibility Support Module.
- cstates       (1 test):
+ cstates         (1 test):
   Check all CPUs C-states.
- dmar          (1 test):
+ dmar            (1 test):
   Check DMA Remapping.
- dmi_decode    (1 test):
+ dmi_decode      (1 test):
   Test DMI/SMBIOS tables for errors.
- ebda          (1 test):
+ ebda            (1 test):
   Check EBDA is reserved in E820 table.
- fadt          (1 test):
+ fadt            (1 test):
   Check FADT SCI_EN bit is enabled.
- fan           (2 tests):
+ fan             (2 tests):
   Check fan status.
   Load system, check CPU fan status.
- hda_audio     (1 test):
+ hda_audio       (1 test):
   Check HDA Audio Pin Configs.
- hpet_check    (3 tests):
+ hpet_check      (4 tests):
   Check HPET base in kernel log.
-  Sanity check HPET configuration.
+  Check HPET base in HPET table. 
   Check HPET base in DSDT and/or SSDT. 
- klog          (1 test):
+  Sanity check HPET configuration.
+ klog            (1 test):
   Kernel log error check.
- maxfreq       (1 test):
+ maxfreq         (1 test):
   Maximum CPU frequency check.
- maxreadreq    (1 test):
+ maxreadreq      (1 test):
   Check firmware settings MaxReadReq for PCI Express devices.
- mcfg          (2 tests):
+ mcfg            (2 tests):
   Validate MCFG table.
   Validate MCFG PCI config space.
- method        (139 tests):
+ method          (139 tests):
   Check Method Names.
   Check _AEI.
   Check _DDN (DOS Device Name).
@@ -192,9 +193,9 @@ Batch tests:
   Check _ROM (Get ROM Data).
   Check _SPD (Set POST Device).
   Check _VPO (Video POST Options).
- microcode     (1 test):
+ microcode       (1 test):
   Check for most recent microcode being loaded.
- mpcheck       (9 tests):
+ mpcheck         (9 tests):
   Check MP header.
   Check MP CPU entries.
   Check MP Bus entries.
@@ -204,107 +205,114 @@ Batch tests:
   Check MP System Address entries.
   Check MP Bus Hierarchy entries.
   Check MP Compatible Bus Address Space entries.
- msr           (5 tests):
+ msr             (5 tests):
   Check CPU generic MSRs.
   Check CPU specific model MSRs.
   Check all P State Ratios.
   Check C1 and C3 autodemotion.
   Check SMRR MSR registers.
- mtrr          (3 tests):
+ mtrr            (3 tests):
   Validate the kernel MTRR IOMEM setup.
   Validate the MTRR setup across all processors.
   Check for AMD MtrrFixDramModEn being cleared by the BIOS.
- nx            (3 tests):
+ nx              (3 tests):
   Check CPU NX capability.
   Check all CPUs have same BIOS set NX flag.
   Check all CPUs have same msr setting in MSR 0x1a0.
- oops          (1 test):
+ oops            (1 test):
   Kernel log oops check.
- os2gap        (1 test):
+ os2gap          (1 test):
   Check the OS/2 15Mb memory hole is absent.
- osilinux      (1 test):
+ osilinux        (1 test):
   Disassemble DSDT to check for _OSI("Linux").
- pcc           (1 test):
+ pcc             (1 test):
   Check PCCH.
- pciirq        (1 test):
+ pciirq          (1 test):
   PCI IRQ Routing Table.
- pnp           (1 test):
+ pnp             (1 test):
   Check PnP BIOS Support Installation structure.
- smbios        (1 test):
+ smbios          (1 test):
   Find and Check SMBIOS Table Entry Point.
- syntaxcheck   (2 tests):
+ syntaxcheck     (2 tests):
   Disassemble and reassemble DSDT
   Disassemble and reassemble SSDT
- version       (3 tests):
+ version         (3 tests):
   Gather kernel signature.
   Gather kernel system information.
   Gather APCI driver version.
- virt          (1 test):
+ virt            (1 test):
   Check CPU Virtualisation Configuration.
- wakealarm     (4 tests):
+ wakealarm       (4 tests):
   Check existence of /sys/class/rtc/rtc0/wakealarm.
   Trigger wakealarm for 1 seconds in the future.
   Check if wakealarm is fired.
   Multiple wakealarm firing tests.
- wmi           (2 tests):
+ wmi             (2 tests):
   Check Windows Management Instrumentation in DSDT
   Check Windows Management Instrumentation in SSDT
 
 Interactive tests:
- ac_adapter    (3 tests):
+ ac_adapter      (3 tests):
   Test ACPI ac_adapter state.
   Test ac_adapter initial on-line state.
   Test ac_adapter state changes.
- battery       (1 test):
+ battery         (1 test):
   Check batteries.
- brightness    (5 tests):
+ brightness      (5 tests):
   Check for maximum and actual brightness.
   Change actual brightness.
   Observe all brightness changes.
   Observe min, max brightness changes.
   Check brightness hotkeys.
- hotkey        (1 test):
+ hotkey          (1 test):
   Hotkey keypress checks.
- lid           (3 tests):
+ lid             (3 tests):
   Test LID buttons report open correctly.
   Test LID buttons on a single open/close.
   Test LID buttons on multiple open/close events.
- power_button  (1 test):
+ power_button    (1 test):
   Test press of power button and ACPI event.
 
 Power States tests:
- s3            (1 test):
+ s3              (1 test):
   S3 suspend/resume test.
- s3power       (1 test):
+ s3power         (1 test):
   S3 power loss during suspend test.
- s4            (1 test):
+ s4              (1 test):
   S4 hibernate/resume test.
 
 Utilities:
- acpidump      (1 test):
+ acpidump        (1 test):
   Dump ACPI tables.
- cmosdump      (1 test):
+ cmosdump        (1 test):
   Dump CMOS Memory.
- ebdadump      (1 test):
+ ebdadump        (1 test):
   Dump EBDA region.
- memmapdump    (1 test):
+ memmapdump      (1 test):
   Dump system memory map.
- mpdump        (1 test):
+ mpdump          (1 test):
   Dump Multi Processor Data.
- romdump       (1 test):
+ romdump         (1 test):
   Dump ROM data.
- uefidump      (1 test):
+ uefidump        (1 test):
   Dump UEFI Variables.
 
 Unsafe tests:
- uefirttime    (4 tests):
+ uefirtmisc      (2 tests):
+  Test for UEFI miscellaneous runtime service interfaces.
+  Stress test for UEFI miscellaneous runtime service interfaces.
+ uefirttime      (4 tests):
   Test UEFI RT service get time interface.
   Test UEFI RT service set time interface.
   Test UEFI RT service get wakeup time interface.
   Test UEFI RT service set wakeup time interface.
- uefirtvariabl (3 tests):
+ uefirtvariable  (7 tests):
   Test UEFI RT service get variable interface.
   Test UEFI RT service get next variable name interface.
   Test UEFI RT service set variable interface.
+  Test UEFI RT service query variable info interface.
+  Test UEFI RT service variable interface stress test.
+  Test UEFI RT service set variable interface stress test.
+  Test UEFI RT service query variable info interface stress test.
 
-Total of 240 tests
+Total of 247 tests
