pcie: aspm: add more information for L0s and L1 warnings. w

---
 src/pci/aspm/aspm.c |   23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

Subject like has a trailing w,

apart from that, ACK.

On 26/09/12 15:44, Alex Hung wrote:
> ---
>   src/pci/aspm/aspm.c |   23 +++++++++++++++++++++++
>   1 file changed, 23 insertions(+)
>
> diff --git a/src/pci/aspm/aspm.c b/src/pci/aspm/aspm.c
> index 90452c2..4211672 100644
> --- a/src/pci/aspm/aspm.c
> +++ b/src/pci/aspm/aspm.c
> @@ -122,6 +122,7 @@ static int pcie_compare_rp_dev_aspm_registers(fwts_framework *fw,
>   	uint8_t rp_aspm_cntrl, device_aspm_cntrl;
>   	uint8_t next_cap;
>   	int ret = FWTS_OK;
> +	bool l0s_disabled = false, l1_disabled = false;
>
>   	next_cap = rp->config[FWTS_PCI_CAPABILITIES_POINTER];
>   	rp_cap = (struct pcie_capability *) &rp->config[next_cap];
> @@ -146,24 +147,46 @@ static int pcie_compare_rp_dev_aspm_registers(fwts_framework *fw,
>   		(rp_cap->link_contrl & FWTS_PCIE_ASPM_CONTROL_L0_FIELD)) {
>   		fwts_warning(fw, "RP %02Xh:%02Xh.%02Xh L0s not enabled.",
>   			 rp->bus, rp->dev, rp->func);
> +		l0s_disabled = true;
>   	}
>
>   	if (((rp_cap->link_cap & FWTS_PCIE_ASPM_SUPPORT_L1_FIELD) >> 10) !=
>   		(rp_cap->link_contrl & FWTS_PCIE_ASPM_CONTROL_L1_FIELD)) {
>   		fwts_warning(fw, "RP %02Xh:%02Xh.%02Xh L1 not enabled.",
>   			rp->bus, rp->dev, rp->func);
> +		l1_disabled = true;
>   	}
>
>   	if (((device_cap->link_cap & FWTS_PCIE_ASPM_SUPPORT_L0_FIELD) >> 10) !=
>   		(device_cap->link_contrl & FWTS_PCIE_ASPM_CONTROL_L0_FIELD)) {
>   		fwts_warning(fw, "Device %02Xh:%02Xh.%02Xh L0s not enabled.",
>   			dev->bus, dev->dev, dev->func);
> +		l0s_disabled = true;
>   	}
>
>   	if (((device_cap->link_cap & FWTS_PCIE_ASPM_SUPPORT_L1_FIELD) >> 10) !=
>   		(device_cap->link_contrl & FWTS_PCIE_ASPM_CONTROL_L1_FIELD)) {
>   		fwts_warning(fw, "Device %02Xh:%02Xh.%02Xh L1 not enabled.",
>   			dev->bus, dev->dev, dev->func);
> +		l1_disabled = true;
> +	}
> +
> +	if (l0s_disabled) {
> +		fwts_advice(fw,
> +			"The ASPM L0s low power Link state is optimized for "
> +			"short entry and exit latencies, while providing "
> +			"substantial power savings. Disabling L0s of a PCIe "
> +			"device may increases power consumption, and will  "
> +			"impact the battery life of a mobile system.");
> +	}
> +
> +	if (l1_disabled) {
> +		fwts_advice(fw,
> +			"The ASPM L1 low power Link state is optimized for "
> +			"maximum power savings with longer entry and exit "
> +			"latencies. Disabling L1 of a PCIe device may "
> +			"increases power consumption, and will impact the "
> +			"battery life of a mobile system significantly.");
>   	}
>
>   	rp_aspm_cntrl = rp_cap->link_contrl & FWTS_PCIE_ASPM_CONTROL_FIELD;
>

On Wed, Sep 26, 2012 at 10:44 PM, Alex Hung <alex.hung@canonical.com> wrote:
> ---
>  src/pci/aspm/aspm.c |   23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
>
> diff --git a/src/pci/aspm/aspm.c b/src/pci/aspm/aspm.c
> index 90452c2..4211672 100644
> --- a/src/pci/aspm/aspm.c
> +++ b/src/pci/aspm/aspm.c
> @@ -122,6 +122,7 @@ static int pcie_compare_rp_dev_aspm_registers(fwts_framework *fw,
>         uint8_t rp_aspm_cntrl, device_aspm_cntrl;
>         uint8_t next_cap;
>         int ret = FWTS_OK;
> +       bool l0s_disabled = false, l1_disabled = false;
>
>         next_cap = rp->config[FWTS_PCI_CAPABILITIES_POINTER];
>         rp_cap = (struct pcie_capability *) &rp->config[next_cap];
> @@ -146,24 +147,46 @@ static int pcie_compare_rp_dev_aspm_registers(fwts_framework *fw,
>                 (rp_cap->link_contrl & FWTS_PCIE_ASPM_CONTROL_L0_FIELD)) {
>                 fwts_warning(fw, "RP %02Xh:%02Xh.%02Xh L0s not enabled.",
>                          rp->bus, rp->dev, rp->func);
> +               l0s_disabled = true;
>         }
>
>         if (((rp_cap->link_cap & FWTS_PCIE_ASPM_SUPPORT_L1_FIELD) >> 10) !=
>                 (rp_cap->link_contrl & FWTS_PCIE_ASPM_CONTROL_L1_FIELD)) {
>                 fwts_warning(fw, "RP %02Xh:%02Xh.%02Xh L1 not enabled.",
>                         rp->bus, rp->dev, rp->func);
> +               l1_disabled = true;
>         }
>
>         if (((device_cap->link_cap & FWTS_PCIE_ASPM_SUPPORT_L0_FIELD) >> 10) !=
>                 (device_cap->link_contrl & FWTS_PCIE_ASPM_CONTROL_L0_FIELD)) {
>                 fwts_warning(fw, "Device %02Xh:%02Xh.%02Xh L0s not enabled.",
>                         dev->bus, dev->dev, dev->func);
> +               l0s_disabled = true;
>         }
>
>         if (((device_cap->link_cap & FWTS_PCIE_ASPM_SUPPORT_L1_FIELD) >> 10) !=
>                 (device_cap->link_contrl & FWTS_PCIE_ASPM_CONTROL_L1_FIELD)) {
>                 fwts_warning(fw, "Device %02Xh:%02Xh.%02Xh L1 not enabled.",
>                         dev->bus, dev->dev, dev->func);
> +               l1_disabled = true;
> +       }
> +
> +       if (l0s_disabled) {
> +               fwts_advice(fw,
> +                       "The ASPM L0s low power Link state is optimized for "
> +                       "short entry and exit latencies, while providing "
> +                       "substantial power savings. Disabling L0s of a PCIe "
> +                       "device may increases power consumption, and will  "
> +                       "impact the battery life of a mobile system.");
> +       }
> +
> +       if (l1_disabled) {
> +               fwts_advice(fw,
> +                       "The ASPM L1 low power Link state is optimized for "
> +                       "maximum power savings with longer entry and exit "
> +                       "latencies. Disabling L1 of a PCIe device may "
> +                       "increases power consumption, and will impact the "
> +                       "battery life of a mobile system significantly.");
>         }
>
>         rp_aspm_cntrl = rp_cap->link_contrl & FWTS_PCIE_ASPM_CONTROL_FIELD;
> --
> 1.7.9.5
>
Acked-by: Keng-Yu Lin <kengyu@canonical.com>