| Message ID | caec561f882521b3896530404ecb2bbad9950435.1449494420.git.cyrille.pitchen@atmel.com |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Mon, Dec 07, 2015 at 03:09:13PM +0100, Cyrille Pitchen wrote: > This patch documents the DT bindings for the driver of the Atmel QSPI > controller embedded inside sama5d2x SoCs. > > Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Rob Herring <robh@kernel.org> > --- > .../devicetree/bindings/mtd/atmel-quadspi.txt | 32 ++++++++++++++++++++++ > 1 file changed, 32 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt > > diff --git a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt > new file mode 100644 > index 000000000000..e81f20f9faf1 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt > @@ -0,0 +1,32 @@ > +* Atmel Quad Serial Peripheral Interface (QSPI) > + > +Required properties: > +- compatible: Should be "atmel,sama5d2-qspi". > +- reg: Should contain the locations and lengths of the base registers > + and the mapped memory. > +- reg-names: Should contain the resource reg names: > + - qspi_base: configuration register address space > + - qspi_mmap: memory mapped address space > +- interrupts: Should contain the interrupt for the device. > +- clocks: The phandle of the clock needed by the QSPI controller. > +- #address-cells: Should be <1>. > +- #size-cells: Should be <0>. > + > +Example: > + > +spi@f0020000 { > + compatible = "atmel,sama5d2-qspi"; > + reg = <0xf0020000 0x100>, <0xd0000000 0x8000000>; > + reg-names = "qpsi_base", "qspi_mmap"; > + interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&spi0_clk>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_spi0_default>; > + status = "okay"; > + > + m25p80@0 { > + ... > + }; > +}; > -- > 1.8.2.2 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Le 07/12/2015 15:09, Cyrille Pitchen a écrit : > This patch documents the DT bindings for the driver of the Atmel QSPI > controller embedded inside sama5d2x SoCs. > > Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> The change is very small from previous one and moreover accepted by Rob. So, for sure: Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> > --- > .../devicetree/bindings/mtd/atmel-quadspi.txt | 32 ++++++++++++++++++++++ > 1 file changed, 32 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt > > diff --git a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt > new file mode 100644 > index 000000000000..e81f20f9faf1 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt > @@ -0,0 +1,32 @@ > +* Atmel Quad Serial Peripheral Interface (QSPI) > + > +Required properties: > +- compatible: Should be "atmel,sama5d2-qspi". > +- reg: Should contain the locations and lengths of the base registers > + and the mapped memory. > +- reg-names: Should contain the resource reg names: > + - qspi_base: configuration register address space > + - qspi_mmap: memory mapped address space > +- interrupts: Should contain the interrupt for the device. > +- clocks: The phandle of the clock needed by the QSPI controller. > +- #address-cells: Should be <1>. > +- #size-cells: Should be <0>. > + > +Example: > + > +spi@f0020000 { > + compatible = "atmel,sama5d2-qspi"; > + reg = <0xf0020000 0x100>, <0xd0000000 0x8000000>; > + reg-names = "qpsi_base", "qspi_mmap"; > + interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>; > + clocks = <&spi0_clk>; > + #address-cells = <1>; > + #size-cells = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_spi0_default>; > + status = "okay"; > + > + m25p80@0 { > + ... > + }; > +}; >
diff --git a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt new file mode 100644 index 000000000000..e81f20f9faf1 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt @@ -0,0 +1,32 @@ +* Atmel Quad Serial Peripheral Interface (QSPI) + +Required properties: +- compatible: Should be "atmel,sama5d2-qspi". +- reg: Should contain the locations and lengths of the base registers + and the mapped memory. +- reg-names: Should contain the resource reg names: + - qspi_base: configuration register address space + - qspi_mmap: memory mapped address space +- interrupts: Should contain the interrupt for the device. +- clocks: The phandle of the clock needed by the QSPI controller. +- #address-cells: Should be <1>. +- #size-cells: Should be <0>. + +Example: + +spi@f0020000 { + compatible = "atmel,sama5d2-qspi"; + reg = <0xf0020000 0x100>, <0xd0000000 0x8000000>; + reg-names = "qpsi_base", "qspi_mmap"; + interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&spi0_clk>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0_default>; + status = "okay"; + + m25p80@0 { + ... + }; +};
This patch documents the DT bindings for the driver of the Atmel QSPI controller embedded inside sama5d2x SoCs. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> --- .../devicetree/bindings/mtd/atmel-quadspi.txt | 32 ++++++++++++++++++++++ 1 file changed, 32 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt