| Message ID | SN7PR12MB810142C58543160AB45D07B3A4CC2@SN7PR12MB8101.namprd12.prod.outlook.com |
|---|---|
| State | Needs Review / ACK |
| Headers | show |
| Series | Add TYHX HX9023S sensor driver | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/patch-applied | success | |
| robh/dt-meta-schema | fail | build log |
On 16/06/2024 09:36, Yasin Lee wrote: > From: Yasin Lee <yasin.lee.x@gmail.com> > > A capacitive proximity sensor Not much improved. No changelog, no responses to previous comments. I already asked TWICE. So this is third time. Respond to each comment and acknowledge that you are going to implement it. Then write full changelog in patch changelog (so under ---) or in cover letter (not present here) saying what changed. NAK, because you keep ignoring same comments given over and over. Best regards, Krzysztof
On Sun, 16 Jun 2024 15:36:48 +0800, Yasin Lee wrote: > From: Yasin Lee <yasin.lee.x@gmail.com> > > A capacitive proximity sensor > > Signed-off-by: Yasin Lee <yasin.lee.x@gmail.com> > --- > .../bindings/iio/proximity/tyhx,hx9023s.yaml | 98 ++++++++++++++++++++++ > 1 file changed, 98 insertions(+) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.yaml: Error in referenced schema matching $id: http://devicetree.org/schemas/iio/proximity/adc.yaml Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:35.15-25: Warning (reg_format): /example-0/i2c/proximity@2a/channel@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:39.15-25: Warning (reg_format): /example-0/i2c/proximity@2a/channel@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:43.15-25: Warning (reg_format): /example-0/i2c/proximity@2a/channel@2:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:47.15-25: Warning (reg_format): /example-0/i2c/proximity@2a/channel@3:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:51.15-25: Warning (reg_format): /example-0/i2c/proximity@2a/channel@4:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:34.23-37.15: Warning (avoid_default_addr_size): /example-0/i2c/proximity@2a/channel@0: Relying on default #address-cells value Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:34.23-37.15: Warning (avoid_default_addr_size): /example-0/i2c/proximity@2a/channel@0: Relying on default #size-cells value Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:38.23-41.15: Warning (avoid_default_addr_size): /example-0/i2c/proximity@2a/channel@1: Relying on default #address-cells value Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:38.23-41.15: Warning (avoid_default_addr_size): /example-0/i2c/proximity@2a/channel@1: Relying on default #size-cells value Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:42.23-45.15: Warning (avoid_default_addr_size): /example-0/i2c/proximity@2a/channel@2: Relying on default #address-cells value Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:42.23-45.15: Warning (avoid_default_addr_size): /example-0/i2c/proximity@2a/channel@2: Relying on default #size-cells value Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:46.23-49.15: Warning (avoid_default_addr_size): /example-0/i2c/proximity@2a/channel@3: Relying on default #address-cells value Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:46.23-49.15: Warning (avoid_default_addr_size): /example-0/i2c/proximity@2a/channel@3: Relying on default #size-cells value Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:50.23-53.15: Warning (avoid_default_addr_size): /example-0/i2c/proximity@2a/channel@4: Relying on default #address-cells value Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:50.23-53.15: Warning (avoid_default_addr_size): /example-0/i2c/proximity@2a/channel@4: Relying on default #size-cells value Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size' /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: proximity@2a: channel@0: False schema does not allow {'reg': [[0]], 'input-channel': [[0]]} from schema $id: http://devicetree.org/schemas/iio/proximity/tyhx,hx9023s.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: proximity@2a: channel@1: False schema does not allow {'reg': [[1]], 'input-channel': [[1]]} from schema $id: http://devicetree.org/schemas/iio/proximity/tyhx,hx9023s.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: proximity@2a: channel@2: False schema does not allow {'reg': [[2]], 'input-channel': [[2]]} from schema $id: http://devicetree.org/schemas/iio/proximity/tyhx,hx9023s.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: proximity@2a: channel@3: False schema does not allow {'reg': [[3]], 'diff-channels': [[1, 0]]} from schema $id: http://devicetree.org/schemas/iio/proximity/tyhx,hx9023s.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: proximity@2a: channel@4: False schema does not allow {'reg': [[4]], 'diff-channels': [[2, 0]]} from schema $id: http://devicetree.org/schemas/iio/proximity/tyhx,hx9023s.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/SN7PR12MB810142C58543160AB45D07B3A4CC2@SN7PR12MB8101.namprd12.prod.outlook.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On 2024/6/16 16:40, Rob Herring (Arm) wrote: > On Sun, 16 Jun 2024 15:36:48 +0800, Yasin Lee wrote: >> From: Yasin Lee <yasin.lee.x@gmail.com> >> >> A capacitive proximity sensor >> >> Signed-off-by: Yasin Lee <yasin.lee.x@gmail.com> >> --- >> .../bindings/iio/proximity/tyhx,hx9023s.yaml | 98 ++++++++++++++++++++++ >> 1 file changed, 98 insertions(+) >> > My bot found errors running 'make dt_binding_check' on your patch: > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.yaml: > Error in referenced schema matching $id: http://devicetree.org/schemas/iio/proximity/adc.yaml > Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:35.15-25: Warning (reg_format): /example-0/i2c/proximity@2a/channel@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) > Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:39.15-25: Warning (reg_format): /example-0/i2c/proximity@2a/channel@1:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) > Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:43.15-25: Warning (reg_format): /example-0/i2c/proximity@2a/channel@2:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) > Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:47.15-25: Warning (reg_format): /example-0/i2c/proximity@2a/channel@3:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) > Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:51.15-25: Warning (reg_format): /example-0/i2c/proximity@2a/channel@4:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1) > Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format' > Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format' > Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: Warning (simple_bus_reg): Failed prerequisite 'reg_format' > Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format' > Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format' > Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:34.23-37.15: Warning (avoid_default_addr_size): /example-0/i2c/proximity@2a/channel@0: Relying on default #address-cells value > Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:34.23-37.15: Warning (avoid_default_addr_size): /example-0/i2c/proximity@2a/channel@0: Relying on default #size-cells value > Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:38.23-41.15: Warning (avoid_default_addr_size): /example-0/i2c/proximity@2a/channel@1: Relying on default #address-cells value > Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:38.23-41.15: Warning (avoid_default_addr_size): /example-0/i2c/proximity@2a/channel@1: Relying on default #size-cells value > Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:42.23-45.15: Warning (avoid_default_addr_size): /example-0/i2c/proximity@2a/channel@2: Relying on default #address-cells value > Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:42.23-45.15: Warning (avoid_default_addr_size): /example-0/i2c/proximity@2a/channel@2: Relying on default #size-cells value > Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:46.23-49.15: Warning (avoid_default_addr_size): /example-0/i2c/proximity@2a/channel@3: Relying on default #address-cells value > Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:46.23-49.15: Warning (avoid_default_addr_size): /example-0/i2c/proximity@2a/channel@3: Relying on default #size-cells value > Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:50.23-53.15: Warning (avoid_default_addr_size): /example-0/i2c/proximity@2a/channel@4: Relying on default #address-cells value > Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dts:50.23-53.15: Warning (avoid_default_addr_size): /example-0/i2c/proximity@2a/channel@4: Relying on default #size-cells value > Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size' > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: proximity@2a: channel@0: False schema does not allow {'reg': [[0]], 'input-channel': [[0]]} > from schema $id: http://devicetree.org/schemas/iio/proximity/tyhx,hx9023s.yaml# > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: proximity@2a: channel@1: False schema does not allow {'reg': [[1]], 'input-channel': [[1]]} > from schema $id: http://devicetree.org/schemas/iio/proximity/tyhx,hx9023s.yaml# > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: proximity@2a: channel@2: False schema does not allow {'reg': [[2]], 'input-channel': [[2]]} > from schema $id: http://devicetree.org/schemas/iio/proximity/tyhx,hx9023s.yaml# > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: proximity@2a: channel@3: False schema does not allow {'reg': [[3]], 'diff-channels': [[1, 0]]} > from schema $id: http://devicetree.org/schemas/iio/proximity/tyhx,hx9023s.yaml# > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.example.dtb: proximity@2a: channel@4: False schema does not allow {'reg': [[4]], 'diff-channels': [[2, 0]]} > from schema $id: http://devicetree.org/schemas/iio/proximity/tyhx,hx9023s.yaml# > > doc reference errors (make refcheckdocs): > > See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/SN7PR12MB810142C58543160AB45D07B3A4CC2@SN7PR12MB8101.namprd12.prod.outlook.com > > The base for the series is generally the latest rc1. A different dependency > should be noted in *this* patch. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit after running the above command yourself. Note > that DT_SCHEMA_FILES can be set to your schema file to speed up checking > your schema. However, it must be unset to test all examples with your schema. > Thank you for your reply. I have corrected the errors according to your suggestions and will include the updates in version 6. Yasin
在 2024/6/16 15:42, Krzysztof Kozlowski 写道: > On 16/06/2024 09:36, Yasin Lee wrote: >> From: Yasin Lee <yasin.lee.x@gmail.com> >> >> A capacitive proximity sensor > Not much improved. No changelog, no responses to previous comments. > > I already asked TWICE. So this is third time. Respond to each comment > and acknowledge that you are going to implement it. > > Then write full changelog in patch changelog (so under ---) or in cover > letter (not present here) saying what changed. > > NAK, because you keep ignoring same comments given over and over. > > Best regards, > Krzysztof > Hi Krzysztof, I apologize for the oversight. I am currently working on addressing each of the previous comments individually. I will ensure that all the comments are addressed in detail and will include a comprehensive changelog in the cover letter for the next version (v6). Thank you for your patience and guidance. Best regards, Yasin Lee
diff --git a/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.yaml b/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.yaml new file mode 100644 index 000000000000..e012290f055b --- /dev/null +++ b/Documentation/devicetree/bindings/iio/proximity/tyhx,hx9023s.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/proximity/tyhx,hx9023s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TYHX HX9023S capacitive proximity sensor + +maintainers: + - Yasin Lee <yasin.lee.x@gmail.com> + +description: | + TYHX HX9023S proximity sensor. Datasheet can be found here: + http://www.tianyihexin.com/ueditor/php/upload/file/20240614/1718336303992081.pdf + +allOf: + - $ref: /schemas/iio/iio.yaml# + +properties: + compatible: + const: tyhx,hx9023s + + reg: + maxItems: 1 + + interrupts: + description: | + Generated by device to announce preceding read request has finished + and data is available or that a close/far proximity event has happened. + maxItems: 1 + + vdd-supply: true + +patternProperties: + "^channel@[0-4]$": + $ref: adc.yaml + type: object + + properties: + reg: + minimum: 0 + maximum: 4 + description: The channel number. + + input-channel: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 4 + description: | + Specify the input pin used in single-ended configuration. + + diff-channels: true + + required: + - reg + + additionalProperties: false + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + proximity@2a { + compatible = "tyhx,hx9023s"; + reg = <0x2a>; + interrupt-parent = <&pio>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pp1800_prox>; + channel@0 { + reg = <0>; + input-channel = <0>; + }; + channel@1 { + reg = <1>; + input-channel = <1>; + }; + channel@2 { + reg = <2>; + input-channel = <2>; + }; + channel@3 { + reg = <3>; + diff-channels = <1 0>; + }; + channel@4 { + reg = <4>; + diff-channels = <2 0>; + }; + }; + };