diff mbox series

[v7,2/6] dt-bindings: gnss: add w2sg0004 bindings documentation

Message ID 851a39473dcdd852040c59b83ef50c3318e74c87.1525340143.git.hns@goldelico.com
State Not Applicable, archived
Headers show
Series gnss: special driver for Wi2Wi w2sg0004 GPS module on GTA04 board | expand

Commit Message

H. Nikolaus Schaller May 3, 2018, 9:35 a.m. UTC 
Add bindings documentation for Wi2Wi W2SG0004 GPS module.

This is a quite old module which does not support a WAKEUP
line and hence can't use a generic SirfStar driver.

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/gnss/wi2wi,w2sg0004.txt    | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gnss/wi2wi,w2sg0004.txt
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/gnss/wi2wi,w2sg0004.txt b/Documentation/devicetree/bindings/gnss/wi2wi,w2sg0004.txt
new file mode 100644
index 000000000000..ac4ec479ea98
--- /dev/null
+++ b/Documentation/devicetree/bindings/gnss/wi2wi,w2sg0004.txt
@@ -0,0 +1,23 @@ 
+Wi2Wi W2SG0004 GPS module connected through UART
+
+Should be a subnode of the SoC UART it is connected to.
+
+Required properties:
+- compatible:	must be
+	"wi2wi,w2sg0004"
+- enable-gpio:	the GPIO that controls the module's power toggle
+	input. A positive impulse of sufficent length toggles the
+	power state.
+
+Optional properties:
+- lna-supply:	an (optional) LNA regulator that is enabled together with the GPS receiver
+
+Example:
+
+&uart2 {
+	w2sg0004: gps {
+		compatible = "wi2wi,w2sg0004";
+		lna-supply = <&vsim>;   /* LNA regulator */
+		enable-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;    /* GPIO_145: trigger for turning on/off w2sg0004 */
+        };
+};