From patchwork Tue Sep 22 07:55:05 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?b?Q2h1bmZlbmcgWXVuICjkupHmmKXls7Ap?= X-Patchwork-Id: 1368814 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=mediatek.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=mediatek.com header.i=@mediatek.com header.a=rsa-sha256 header.s=dk header.b=LsiF621A; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4BwYWX3f77z9sTM for ; Tue, 22 Sep 2020 17:55:20 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726658AbgIVHzT (ORCPT ); Tue, 22 Sep 2020 03:55:19 -0400 Received: from mailgw01.mediatek.com ([210.61.82.183]:35126 "EHLO mailgw01.mediatek.com" rhost-flags-OK-FAIL-OK-FAIL) by vger.kernel.org with ESMTP id S1726341AbgIVHzR (ORCPT ); Tue, 22 Sep 2020 03:55:17 -0400 X-UUID: 0c571a1277dd462fbeccf04e79430489-20200922 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=mediatek.com; s=dk; h=Content-Transfer-Encoding:Content-Type:MIME-Version:Message-ID:Date:Subject:CC:To:From; bh=hq5x9xZuRCXn9RiN7WIPWNOzdWvbKOV5nFcOM1vUYe0=; b=LsiF621AggH9q9yaE8fH5nBC1AN8fABA1S2WWxlL4qdxcFrdAVok7O8LG6xEoh80g/Pq4c1y0XlYn6SNHu9oZjVPgUI2T9+31LaMeuNWPdRqafX1VT+vYTf/PUREPZ0nnqWguq1tBsq7WtvM8l1TqM4O0JQycLPqcwBZ/fKNsug=; X-UUID: 0c571a1277dd462fbeccf04e79430489-20200922 Received: from mtkexhb02.mediatek.inc [(172.21.101.103)] by mailgw01.mediatek.com (envelope-from ) (Cellopoint E-mail Firewall v4.1.14 Build 0819 with TLSv1.2 ECDHE-RSA-AES256-SHA384 256/256) with ESMTP id 422294359; Tue, 22 Sep 2020 15:55:10 +0800 Received: from MTKCAS06.mediatek.inc (172.21.101.30) by mtkmbs05n1.mediatek.inc (172.21.101.15) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Tue, 22 Sep 2020 15:55:08 +0800 Received: from mtkslt301.mediatek.inc (10.21.14.114) by MTKCAS06.mediatek.inc (172.21.101.73) with Microsoft SMTP Server id 15.0.1497.2 via Frontend Transport; Tue, 22 Sep 2020 15:55:07 +0800 From: Chunfeng Yun To: Chun-Kuang Hu , Rob Herring , Kishon Vijay Abraham I , Stanley Chu CC: Philipp Zabel , David Airlie , Daniel Vetter , Vinod Koul , Chunfeng Yun , Matthias Brugger , CK Hu , , , , , Subject: [PATCH 1/4] dt-bindings: phy: convert phy-mtk-xsphy.txt to YAML schema Date: Tue, 22 Sep 2020 15:55:05 +0800 Message-ID: <5af7c097d1c71a180d8ed1f1a44055859b42f1a0.1600760719.git.chunfeng.yun@mediatek.com> X-Mailer: git-send-email 2.18.0 MIME-Version: 1.0 X-MTK: N Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Convert phy-mtk-xsphy.txt to YAML schema mediatek,xsphy.yaml Signed-off-by: Chunfeng Yun --- .../bindings/phy/mediatek,xsphy.yaml | 203 ++++++++++++++++++ .../devicetree/bindings/phy/phy-mtk-xsphy.txt | 109 ---------- 2 files changed, 203 insertions(+), 109 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml delete mode 100644 Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt diff --git a/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml new file mode 100644 index 000000000000..0aaa10640b5a --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml @@ -0,0 +1,203 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,xsphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek XS-PHY Controller Device Tree Bindings + +maintainers: + - Chunfeng Yun + +description: | + The XS-PHY controller supports physical layer functionality for USB3.1 + GEN2 controller on MediaTek SoCs. + +properties: + $nodename: + pattern: "^xs-phy@[0-9a-f]+$" + + compatible: + oneOf: + - items: + - enum: + - mediatek,mt3611-xsphy + - enum: + - mediatek,xsphy + - items: + - const: mediatek,xsphy + + reg: + description: | + Register shared by multiple U3 ports, exclude port's private register, + if only U2 ports provided, shouldn't use the property. + maxItems: 1 + + "#address-cells": + enum: [1, 2] + + "#size-cells": + enum: [1, 2] + + ranges: true + + mediatek,src-ref-clk-mhz: + description: + Frequency of reference clock for slew rate calibrate + $ref: /schemas/types.yaml#/definitions/uint32 + default: 26 + + mediatek,src-coef: + description: + Coefficient for slew rate calibrate, depends on SoC process + $ref: /schemas/types.yaml#/definitions/uint32 + default: 17 + +# Required child node: +patternProperties: + "^usb-phy@[0-9a-f]+$": + type: object + description: | + A sub-node is required for each port the controller provides. + Address range information including the usual 'reg' property + is used inside these nodes to describe the controller's topology. + + properties: + reg: + maxItems: 1 + + clocks: + items: + - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz) + + clock-names: + items: + - const: ref + + "#phy-cells": + const: 1 + description: | + The cells contain the following arguments. + + - description: The PHY type + enum: + - PHY_TYPE_USB2 + - PHY_TYPE_USB3 + + #The following optional vendor properties are only for debug or HQA test + mediatek,eye-src: + description: + The value of slew rate calibrate (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + + mediatek,eye-vrt: + description: + The selection of VRT reference voltage (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + + mediatek,eye-term: + description: + The selection of HS_TX TERM reference voltage (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + + mediatek,efuse-intr: + description: + The selection of Internal Resistor (U2/U3 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 63 + + mediatek,efuse-tx-imp: + description: + The selection of TX Impedance (U3 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 31 + + mediatek,efuse-rx-imp: + description: + The selection of RX Impedance (U3 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 31 + + required: + - reg + - clocks + - clock-names + - "#phy-cells" + + additionalProperties: false + +required: + - compatible + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +#Banks layout of xsphy +#------------------------------------------------------------- +#port offset bank +#u2 port0 0x0000 MISC +# 0x0100 FMREG +# 0x0300 U2PHY_COM +#u2 port1 0x1000 MISC +# 0x1100 FMREG +# 0x1300 U2PHY_COM +#u2 port2 0x2000 MISC +# ... +#u31 common 0x3000 DIG_GLB +# 0x3100 PHYA_GLB +#u31 port0 0x3400 DIG_LN_TOP +# 0x3500 DIG_LN_TX0 +# 0x3600 DIG_LN_RX0 +# 0x3700 DIG_LN_DAIF +# 0x3800 PHYA_LN +#u31 port1 0x3a00 DIG_LN_TOP +# 0x3b00 DIG_LN_TX0 +# 0x3c00 DIG_LN_RX0 +# 0x3d00 DIG_LN_DAIF +# 0x3e00 PHYA_LN +# ... +#DIG_GLB & PHYA_GLB are shared by U31 ports. + +examples: + - | + #include + + u3phy: xs-phy@11c40000 { + compatible = "mediatek,mt3611-xsphy", "mediatek,xsphy"; + reg = <0x11c43000 0x0200>; + mediatek,src-ref-clk-mhz = <26>; + mediatek,src-coef = <17>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + u2port0: usb-phy@11c40000 { + reg = <0x11c40000 0x0400>; + clocks = <&clk48m>; + clock-names = "ref"; + mediatek,eye-src = <4>; + #phy-cells = <1>; + }; + + u3port0: usb-phy@11c43000 { + reg = <0x11c43400 0x0500>; + clocks = <&clk26m>; + clock-names = "ref"; + mediatek,efuse-intr = <28>; + #phy-cells = <1>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt deleted file mode 100644 index e7caefa0b9c2..000000000000 --- a/Documentation/devicetree/bindings/phy/phy-mtk-xsphy.txt +++ /dev/null @@ -1,109 +0,0 @@ -MediaTek XS-PHY binding --------------------------- - -The XS-PHY controller supports physical layer functionality for USB3.1 -GEN2 controller on MediaTek SoCs. - -Required properties (controller (parent) node): - - compatible : should be "mediatek,-xsphy", "mediatek,xsphy", - soc-model is the name of SoC, such as mt3611 etc; - when using "mediatek,xsphy" compatible string, you need SoC specific - ones in addition, one of: - - "mediatek,mt3611-xsphy" - - - #address-cells, #size-cells : should use the same values as the root node - - ranges: must be present - -Optional properties (controller (parent) node): - - reg : offset and length of register shared by multiple U3 ports, - exclude port's private register, if only U2 ports provided, - shouldn't use the property. - - mediatek,src-ref-clk-mhz : u32, frequency of reference clock for slew rate - calibrate - - mediatek,src-coef : u32, coefficient for slew rate calibrate, depends on - SoC process - -Required nodes : a sub-node is required for each port the controller - provides. Address range information including the usual - 'reg' property is used inside these nodes to describe - the controller's topology. - -Required properties (port (child) node): -- reg : address and length of the register set for the port. -- clocks : a list of phandle + clock-specifier pairs, one for each - entry in clock-names -- clock-names : must contain - "ref": 48M reference clock for HighSpeed analog phy; and 26M - reference clock for SuperSpeedPlus analog phy, sometimes is - 24M, 25M or 27M, depended on platform. -- #phy-cells : should be 1 - cell after port phandle is phy type from: - - PHY_TYPE_USB2 - - PHY_TYPE_USB3 - -The following optional properties are only for debug or HQA test -Optional properties (PHY_TYPE_USB2 port (child) node): -- mediatek,eye-src : u32, the value of slew rate calibrate -- mediatek,eye-vrt : u32, the selection of VRT reference voltage -- mediatek,eye-term : u32, the selection of HS_TX TERM reference voltage -- mediatek,efuse-intr : u32, the selection of Internal Resistor - -Optional properties (PHY_TYPE_USB3 port (child) node): -- mediatek,efuse-intr : u32, the selection of Internal Resistor -- mediatek,efuse-tx-imp : u32, the selection of TX Impedance -- mediatek,efuse-rx-imp : u32, the selection of RX Impedance - -Banks layout of xsphy -------------------------------------------------------------- -port offset bank -u2 port0 0x0000 MISC - 0x0100 FMREG - 0x0300 U2PHY_COM -u2 port1 0x1000 MISC - 0x1100 FMREG - 0x1300 U2PHY_COM -u2 port2 0x2000 MISC - ... -u31 common 0x3000 DIG_GLB - 0x3100 PHYA_GLB -u31 port0 0x3400 DIG_LN_TOP - 0x3500 DIG_LN_TX0 - 0x3600 DIG_LN_RX0 - 0x3700 DIG_LN_DAIF - 0x3800 PHYA_LN -u31 port1 0x3a00 DIG_LN_TOP - 0x3b00 DIG_LN_TX0 - 0x3c00 DIG_LN_RX0 - 0x3d00 DIG_LN_DAIF - 0x3e00 PHYA_LN - ... - -DIG_GLB & PHYA_GLB are shared by U31 ports. - -Example: - -u3phy: usb-phy@11c40000 { - compatible = "mediatek,mt3611-xsphy", "mediatek,xsphy"; - reg = <0 0x11c43000 0 0x0200>; - mediatek,src-ref-clk-mhz = <26>; - mediatek,src-coef = <17>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - u2port0: usb-phy@11c40000 { - reg = <0 0x11c40000 0 0x0400>; - clocks = <&clk48m>; - clock-names = "ref"; - mediatek,eye-src = <4>; - #phy-cells = <1>; - }; - - u3port0: usb-phy@11c43000 { - reg = <0 0x11c43400 0 0x0500>; - clocks = <&clk26m>; - clock-names = "ref"; - mediatek,efuse-intr = <28>; - #phy-cells = <1>; - }; -};