diff mbox series

[2/2] dt-bindings: Document the DesignWare IP reset bindings

Message ID 57b3e24f85b0838fc7fafe35abab00e19993d458.1557759340.git.gustavo.pimentel@synopsys.com
State Superseded, archived
Headers show
Series Add DesignWare IP support to simple reset | expand

Checks

Context Check Description
robh/checkpatch success

Commit Message

Gustavo Pimentel May 13, 2019, 3:41 p.m. UTC 
This adds documentation of device tree bindings for the
DesignWare IP reset controller.

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Luis Oliveira <luis.oliveira@synopsys.com>
---
 .../devicetree/bindings/reset/snps,dw-reset.txt    | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/snps,dw-reset.txt
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/reset/snps,dw-reset.txt b/Documentation/devicetree/bindings/reset/snps,dw-reset.txt
new file mode 100644
index 0000000..5316212
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/snps,dw-reset.txt
@@ -0,0 +1,30 @@ 
+Synopsys DesignWare Reset controller
+=======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+Required properties:
+
+- compatible: should be one of the following.
+	"snps,dw-high-reset" - for active high configuration
+	"snps,dw-low-reset" - for active low configuration
+
+- reg: physical base address of the controller and length of memory mapped
+	region.
+
+- #reset-cells: must be 1.
+
+example:
+
+	dw_rst: reset-controller@0000 {
+		compatible = "dw,dw-high-reset";
+		reg = <0x0000 0x4>;
+		#reset-cells = <1>;
+	};
+
+	dw_rst: reset-controller@1000 {
+		compatible = "dw,dw-low-reset";
+		reg = <0x1000 0x4>;
+		#reset-cells = <1>;
+	};