diff mbox series

[1/3] dt-bindings: staging: iio: cdc: ad7746: add binding documentation for AD7746

Message ID 4be8e3e40794474d8622192c6a5ea0fb4af527e1.1617993776.git.lucas.p.stankus@gmail.com
State Changes Requested, archived
Headers show
Series staging: iio: cdc: ad7746: remove platform_data in favor of device tree bindings | expand

Checks

Context Check Description
robh/checkpatch success
robh/dt-meta-schema success
robh/dtbs-check success

Commit Message

Lucas Stankus April 9, 2021, 6:50 p.m. UTC 
Add device tree binding documentation for AD7746 cdc in YAML format.

Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com>
---
 .../bindings/iio/cdc/adi,ad7746.yaml          | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml

Comments

Jonathan Cameron April 11, 2021, 1:46 p.m. UTC | #1 
On Fri, 9 Apr 2021 15:50:10 -0300
Lucas Stankus <lucas.p.stankus@gmail.com> wrote:

> Add device tree binding documentation for AD7746 cdc in YAML format.
> 
> Signed-off-by: Lucas Stankus <lucas.p.stankus@gmail.com>

Hi Lucas,

Good to see progress on this one after all these years :)

I think we can do a bit better though by making the attributes
easy to comprehend without needing to refer to the documentation.
Always good to avoid magic numbers if we can.

Suggestions inline.

Jonathan

> ---
>  .../bindings/iio/cdc/adi,ad7746.yaml          | 79 +++++++++++++++++++
>  1 file changed, 79 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml b/Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml
> new file mode 100644
> index 000000000000..5de86f4374e1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml
> @@ -0,0 +1,79 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/cdc/adi,ad7746.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: AD7746 24-Bit Capacitance-to-Digital Converter with Temperature Sensor
> +
> +maintainers:
> +  - Michael Hennerich <michael.hennerich@analog.com>
> +
> +description: |
> +  AD7746 24-Bit Capacitance-to-Digital Converter with Temperature Sensor
> +
> +  Specifications about the part can be found at:
> +  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7291.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,ad7745
> +      - adi,ad7746
> +      - adi,ad7747
> +
> +  reg:
> +    description: |
> +      Physiscal address of the EXC set-up register.

reg in this case would be the i2c address.

> +    maxItems: 1
> +
> +  adi,excitation-voltage-level:

This isn't a level as such, it's a scale factor, or something like
that and the naming should reflect that + the values
should be real in some sense (multipliers so
perhaps something like adi,excitation-vdd-milicent ?
schema/property-units.yaml includes -percent but that doesn't
have enough precision.

enum [125, 250, 375, 500] 

> +    description: |
> +      Select the reference excitation voltage level used by the device.
> +      With VDD being the power supply voltage, valid values are:
> +      0: +-VDD / 8
> +      1: +-VDD / 4
> +      2: +-VDD * 3 / 8
> +      3: +-VDD / 2
> +      If left empty option 3 is selected.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1, 2, 3]
> +
> +  adi,exca-output:
> +    description: |
> +      Sets the excitation output in the exca pin.
> +      Valid values are:
> +      0: Disables output in the EXCA pin.
> +      1: Enables EXCA pin as the excitation output.
> +      2: Enables EXCA pin as the inverted excitation output.

Hmm. Various ways we could do this and avoid the need for
a enum representing several different things.  Perhaps

adi,exa-output-en
adi,exa-output-invert

(appropriate checks so we can only have invert of the channel
is enabled as otherwise it is less than meaningful)

> +      If left empty the output is disabled.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1, 2]
> +
> +  adi,excb-output:
> +    description: |
> +      Analoguos to the adi,exca-output for the EXCB pin.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1, 2]
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      ad7746: cdc@0 {
> +        compatible = "adi,ad7746";
> +        reg = <0>;

That's very unlikely as an i2c address.

> +        adi,excitation-voltage-level = <3>;
> +        adi,exca-output = <0>;
> +        adi,excb-output = <0>;
> +      };
> +    };
> +...
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml b/Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml
new file mode 100644
index 000000000000..5de86f4374e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/cdc/adi,ad7746.yaml
@@ -0,0 +1,79 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/cdc/adi,ad7746.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AD7746 24-Bit Capacitance-to-Digital Converter with Temperature Sensor
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  AD7746 24-Bit Capacitance-to-Digital Converter with Temperature Sensor
+
+  Specifications about the part can be found at:
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ad7291.pdf
+
+properties:
+  compatible:
+    enum:
+      - adi,ad7745
+      - adi,ad7746
+      - adi,ad7747
+
+  reg:
+    description: |
+      Physiscal address of the EXC set-up register.
+    maxItems: 1
+
+  adi,excitation-voltage-level:
+    description: |
+      Select the reference excitation voltage level used by the device.
+      With VDD being the power supply voltage, valid values are:
+      0: +-VDD / 8
+      1: +-VDD / 4
+      2: +-VDD * 3 / 8
+      3: +-VDD / 2
+      If left empty option 3 is selected.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+
+  adi,exca-output:
+    description: |
+      Sets the excitation output in the exca pin.
+      Valid values are:
+      0: Disables output in the EXCA pin.
+      1: Enables EXCA pin as the excitation output.
+      2: Enables EXCA pin as the inverted excitation output.
+      If left empty the output is disabled.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+  adi,excb-output:
+    description: |
+      Analoguos to the adi,exca-output for the EXCB pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2]
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      ad7746: cdc@0 {
+        compatible = "adi,ad7746";
+        reg = <0>;
+        adi,excitation-voltage-level = <3>;
+        adi,exca-output = <0>;
+        adi,excb-output = <0>;
+      };
+    };
+...