diff mbox series

[net-next,v3,1/3] dt-bindings: net: qcom,ethqos: add binding doc for safety IRQ for sa8775p

Message ID 2f215e2dabec345ec7f28e759c9463854959cced.1701695218.git.quic_jsuraj@quicinc.com
State Changes Requested
Headers show
Series Ethernet DWMAC5 fault IRQ support | expand

Checks

Context Check Description
robh/checkpatch success
robh/patch-applied success
robh/dt-meta-schema fail build log

Commit Message

Suraj Jaiswal Dec. 4, 2023, 1:26 p.m. UTC
Add binding doc for safety IRQ. The safety IRQ will be
triggered for ECC, DPP, FSM error.

Signed-off-by: Suraj Jaiswal <quic_jsuraj@quicinc.com>
---
 Documentation/devicetree/bindings/net/qcom,ethqos.yaml | 9 ++++++---
 Documentation/devicetree/bindings/net/snps,dwmac.yaml  | 5 +++--
 2 files changed, 9 insertions(+), 5 deletions(-)

Comments

Rob Herring Dec. 4, 2023, 2:45 p.m. UTC | #1
On Mon, 04 Dec 2023 18:56:15 +0530, Suraj Jaiswal wrote:
> Add binding doc for safety IRQ. The safety IRQ will be
> triggered for ECC, DPP, FSM error.
> 
> Signed-off-by: Suraj Jaiswal <quic_jsuraj@quicinc.com>
> ---
>  Documentation/devicetree/bindings/net/qcom,ethqos.yaml | 9 ++++++---
>  Documentation/devicetree/bindings/net/snps,dwmac.yaml  | 5 +++--
>  2 files changed, 9 insertions(+), 5 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/snps,dwmac.example.dtb: ethernet@e0800000: interrupt-names:2: 'eth_lpi' is not one of ['eth_wake_irq', 'safety']
	from schema $id: http://devicetree.org/schemas/net/snps,dwmac.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.example.dtb: ethernet@16030000: interrupt-names:2: 'eth_lpi' is not one of ['eth_wake_irq', 'safety']
	from schema $id: http://devicetree.org/schemas/net/snps,dwmac.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.example.dtb: ethernet@16030000: interrupt-names:2: 'eth_lpi' is not one of ['eth_wake_irq', 'safety']
	from schema $id: http://devicetree.org/schemas/net/starfive,jh7110-dwmac.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/net/starfive,jh7110-dwmac.example.dtb: ethernet@16030000: Unevaluated properties are not allowed ('mdio', 'phy-handle', 'phy-mode', 'rx-fifo-depth', 'snps,axi-config', 'snps,en-tx-lpi-clockgating', 'snps,fixed-burst', 'snps,force_thresh_dma_mode', 'snps,multicast-filter-bins', 'snps,no-pbl-x8', 'snps,perfect-filter-entries', 'snps,rxpbl', 'snps,tso', 'snps,txpbl', 'stmmac-axi-config', 'tx-fifo-depth' were unexpected)
	from schema $id: http://devicetree.org/schemas/net/starfive,jh7110-dwmac.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/2f215e2dabec345ec7f28e759c9463854959cced.1701695218.git.quic_jsuraj@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
index 7bdb412a0185..93d21389e518 100644
--- a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml
@@ -37,12 +37,14 @@  properties:
     items:
       - description: Combined signal for various interrupt events
       - description: The interrupt that occurs when Rx exits the LPI state
+      - description: The interrupt that occurs when HW safety error triggered
 
   interrupt-names:
     minItems: 1
     items:
       - const: macirq
-      - const: eth_lpi
+      - enum: [eth_lpi, safety]
+      - const: safety
 
   clocks:
     maxItems: 4
@@ -89,8 +91,9 @@  examples:
                <&gcc GCC_ETH_PTP_CLK>,
                <&gcc GCC_ETH_RGMII_CLK>;
       interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-                   <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-      interrupt-names = "macirq", "eth_lpi";
+                   <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "macirq", "eth_lpi", "safety";
 
       rx-fifo-depth = <4096>;
       tx-fifo-depth = <4096>;
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 5c2769dc689a..82ddee0ed1d1 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -107,13 +107,14 @@  properties:
       - description: Combined signal for various interrupt events
       - description: The interrupt to manage the remote wake-up packet detection
       - description: The interrupt that occurs when Rx exits the LPI state
+      - description: The interrupt that occurs when HW safety error triggered
 
   interrupt-names:
     minItems: 1
     items:
       - const: macirq
-      - enum: [eth_wake_irq, eth_lpi]
-      - const: eth_lpi
+      - enum: [eth_wake_irq, eth_lpi, safety]
+      - enum: [eth_wake_irq, safety]
 
   clocks:
     minItems: 1