diff mbox series

[1/3] dt-bindings: add dream vendor prefix

Message ID 20240606094513.3949323-1-christianshewitt@gmail.com
State Not Applicable
Headers show
Series [1/3] dt-bindings: add dream vendor prefix | expand

Checks

Context Check Description
robh/checkpatch success
robh/patch-applied success
robh/dtbs-check warning build log
robh/dt-meta-schema success

Commit Message

Christian Hewitt June 6, 2024, 9:45 a.m. UTC
Add a vendor prefix for Dream Property GmbH

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
 Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
 1 file changed, 2 insertions(+)

Comments

Krzysztof Kozlowski June 6, 2024, 12:36 p.m. UTC | #1
On 06/06/2024 11:45, Christian Hewitt wrote:
> Add a vendor prefix for Dream Property GmbH
> 
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
Rob Herring (Arm) June 6, 2024, 3:56 p.m. UTC | #2
On Thu, 06 Jun 2024 09:45:11 +0000, Christian Hewitt wrote:
> Add a vendor prefix for Dream Property GmbH
> 
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++
>  1 file changed, 2 insertions(+)
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y amlogic/meson-g12b-dreambox-one.dtb amlogic/meson-g12b-dreambox-two.dtb' for 20240606094513.3949323-1-christianshewitt@gmail.com:

arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-two.dtb: /soc/bus@ff600000/bus@42000/clock-controller@0: failed to match any schema with compatible: ['amlogic,g12a-audio-clkc']
arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-one.dtb: /soc/bus@ff600000/bus@42000/clock-controller@0: failed to match any schema with compatible: ['amlogic,g12a-audio-clkc']
arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-two.dtb: /soc/bus@ff600000/bus@42000/audio-controller@744: failed to match any schema with compatible: ['amlogic,g12a-tohdmitx']
arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-two.dtb: sys-ctrl@0: '#address-cells', '#size-cells', 'ranges' do not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml#
arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-one.dtb: /soc/bus@ff600000/bus@42000/audio-controller@744: failed to match any schema with compatible: ['amlogic,g12a-tohdmitx']
arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-one.dtb: sys-ctrl@0: '#address-cells', '#size-cells', 'ranges' do not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml#
Neil Armstrong June 7, 2024, 8:06 a.m. UTC | #3
On 06/06/2024 11:45, Christian Hewitt wrote:
> Dreambox One and Dreambox Two are based on the Amlogic W400 reference
> board with an S922X chip and the following specs:
> 
> - 2GB DDR3 RAM
> - 16GB eMMC
> - 10/100/1000 Base-T Ethernet
> - AP6356 Wireless (802.11 b/g/n/ac, BT 5.0)
> - HDMI 2.1 video
> - S/PDIF optical output
> - 2x DVB-S2/T2
> - Smartcard Reader Slot
> - 2x USB 2.0 port (1x micro-USB for service)
> - 1x USB 3.0 port
> - IR receiver
> - 1x Power LED (blue)
> - 1x Power button (top)
> - 1x Update/Reset button (underside)
> - 1x micro SD card slot
> 
> Dreambox Two differences:
> 
> - 3" Colour LCD display (MIPI-DSI)
> - Common Interface Slot
> 
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
>   arch/arm64/boot/dts/amlogic/Makefile          |   2 +
>   .../dts/amlogic/meson-g12b-dreambox-one.dts   |  17 ++
>   .../dts/amlogic/meson-g12b-dreambox-two.dts   |  20 +++
>   .../boot/dts/amlogic/meson-g12b-dreambox.dtsi | 159 ++++++++++++++++++
>   4 files changed, 198 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-one.dts
>   create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-two.dts
>   create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
> 
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index 0746e01b5853..4addcae2c54e 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -21,6 +21,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3-ts050.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-cm4io.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-mnt-reform2.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-dreambox-one.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-dreambox-two.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-one.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-one.dts
> new file mode 100644
> index 000000000000..ecfa1c683dde
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-one.dts
> @@ -0,0 +1,17 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-g12b-dreambox.dtsi"
> +
> +/ {
> +	compatible = "dream,dreambox-one", "amlogic,s922x", "amlogic,g12b";
> +	model = "Dreambox One";
> +};
> +
> +&sd_emmc_a {
> +	sd-uhs-sdr12;
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-two.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-two.dts
> new file mode 100644
> index 000000000000..df0d71983c3d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-two.dts
> @@ -0,0 +1,20 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Christian Hewitt <christianshewitt@gmail.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-g12b-dreambox.dtsi"
> +
> +/ {
> +	compatible = "dream,dreambox-two", "amlogic,s922x", "amlogic,g12b";
> +	model = "Dreambox Two";
> +};
> +
> +&sd_emmc_a {
> +	sd-uhs-sdr12;
> +	sd-uhs-sdr25;
> +	sd-uhs-sdr50;
> +	sd-uhs-sdr104;
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
> new file mode 100644
> index 000000000000..a302b127f32a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
> @@ -0,0 +1,159 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Christian Hewitt <christianshewitt@gmail.com>
> + */
> +
> +#include "meson-g12b-w400.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
> +
> +/ {
> +	cvbs-connector {
> +		status = "disabled";
> +	};
> +
> +	sdio_pwrseq: sdio-pwrseq {
> +		compatible = "mmc-pwrseq-simple";
> +		reset-gpios = <&gpio GPIOA_11 GPIO_ACTIVE_LOW>;
> +		clocks = <&wifi32k>;
> +		clock-names = "ext_clock";
> +	};
> +
> +	spdif_dit: audio-codec-1 {
> +		#sound-dai-cells = <0>;
> +		compatible = "linux,spdif-dit";
> +		status = "okay";
> +		sound-name-prefix = "DIT";
> +	};
> +
> +	sound {
> +		compatible = "amlogic,axg-sound-card";
> +		model = "DREAMBOX";
> +		audio-aux-devs = <&tdmout_b>;
> +		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
> +				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
> +				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
> +				"TDM_B Playback", "TDMOUT_B OUT",
> +				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
> +				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
> +				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
> +
> +		dai-link-0 {
> +			sound-dai = <&frddr_a>;
> +		};
> +
> +		dai-link-1 {
> +			sound-dai = <&frddr_b>;
> +		};
> +
> +		dai-link-2 {
> +			sound-dai = <&frddr_c>;
> +		};
> +
> +		/* 8ch hdmi interface */
> +		dai-link-3 {
> +			sound-dai = <&tdmif_b>;
> +			dai-format = "i2s";
> +			dai-tdm-slot-tx-mask-0 = <1 1>;
> +			dai-tdm-slot-tx-mask-1 = <1 1>;
> +			dai-tdm-slot-tx-mask-2 = <1 1>;
> +			dai-tdm-slot-tx-mask-3 = <1 1>;
> +			mclk-fs = <256>;
> +
> +			codec {
> +				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
> +			};
> +		};
> +
> +		/* spdif hdmi or toslink interface */
> +		dai-link-4 {
> +			sound-dai = <&spdifout_a>;
> +
> +			codec-0 {
> +				sound-dai = <&spdif_dit>;
> +			};
> +
> +			codec-1 {
> +				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
> +			};
> +		};
> +
> +		/* spdif hdmi interface */
> +		dai-link-5 {
> +			sound-dai = <&spdifout_b>;
> +
> +			codec {
> +				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
> +			};
> +		};
> +
> +		/* hdmi glue */
> +		dai-link-6 {
> +			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
> +
> +			codec {
> +				sound-dai = <&hdmi_tx>;
> +			};
> +		};
> +	};
> +};
> +
> +&arb {
> +	status = "okay";
> +};
> +
> +&clkc_audio {
> +	assigned-clocks = <&clkc CLKID_MPLL2>,
> +			  <&clkc CLKID_MPLL0>,
> +			  <&clkc CLKID_MPLL1>;
> +	assigned-clock-parents = <0>, <0>, <0>;
> +	assigned-clock-rates = <294912000>,
> +			       <270950400>,
> +			       <393216000>;
> +
> +	status = "okay";
> +};
> +
> +&frddr_a {
> +	status = "okay";
> +};
> +
> +&frddr_b {
> +	status = "okay";
> +};
> +
> +&frddr_c {
> +	status = "okay";
> +};
> +
> +&ir {
> +	linux,rc-map-name = "rc-dreambox";
> +};
> +
> +&saradc {
> +	status = "okay";
> +	vref-supply = <&vddao_1v8>;
> +};
> +
> +&spdifout_a {
> +	pinctrl-0 = <&spdif_out_h_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +};
> +
> +&spdifout_b {
> +	status = "okay";
> +};
> +
> +&tdmif_b {
> +	status = "okay";
> +};
> +
> +&tdmout_b {
> +	status = "okay";
> +};
> +
> +&tohdmitx {
> +	status = "okay";
> +};

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index fbf47f0bacf1..a6cb1eb8e5e0 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -394,6 +394,8 @@  patternProperties:
     description: DPTechnics
   "^dragino,.*":
     description: Dragino Technology Co., Limited
+  "^dream,.*":
+    description: Dream Property GmbH
   "^ds,.*":
     description: DaSheng, Inc.
   "^dserve,.*":