| Message ID | 20240523075347.1282395-2-msp@baylibre.com |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | can: m_can: Add am62 wakeup support | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/patch-applied | success | |
| robh/dtbs-check | warning | build log |
| robh/dt-meta-schema | success |
On Thu, May 23, 2024 at 09:53:41AM +0200, Markus Schneider-Pargmann wrote: > m_can can be a wakeup source on some devices. Especially on some of the > am62* SoCs pins, connected to m_can in the mcu, can be used to wakeup > the SoC. > > This property defines on which devices m_can can be used for wakeup. > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > --- > Documentation/devicetree/bindings/net/can/bosch,m_can.yaml | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml > index f9ffb963d6b1..33f1688ca208 100644 > --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml > +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml > @@ -118,6 +118,10 @@ properties: > phys: > maxItems: 1 > > + wakeup-source: > + $ref: /schemas/types.yaml#/definitions/flag > + description: This device is capable to wakeup the SoC. It seems to me like patch 1 & 2 should be squashed, with "wakeup-source" depending on the correct pinctrl setup?
diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml index f9ffb963d6b1..33f1688ca208 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -118,6 +118,10 @@ properties: phys: maxItems: 1 + wakeup-source: + $ref: /schemas/types.yaml#/definitions/flag + description: This device is capable to wakeup the SoC. + required: - compatible - reg
m_can can be a wakeup source on some devices. Especially on some of the am62* SoCs pins, connected to m_can in the mcu, can be used to wakeup the SoC. This property defines on which devices m_can can be used for wakeup. Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> --- Documentation/devicetree/bindings/net/can/bosch,m_can.yaml | 4 ++++ 1 file changed, 4 insertions(+)