diff mbox series

[v4,3/4] dt-bindings: input: atmel,maxtouch: add poweroff-sleep property

Message ID 20240417090527.15357-4-eichest@gmail.com
State Not Applicable
Headers show
Series Add a property to turn off the max touch controller if not used | expand

Checks

Context Check Description
robh/checkpatch success
robh/patch-applied success
robh/dtbs-check warning build log
robh/dt-meta-schema success

Commit Message

Stefan Eichenberger April 17, 2024, 9:05 a.m. UTC 
From: Stefan Eichenberger <stefan.eichenberger@toradex.com>

Add a new property to indicate that the device should power off rather
than use deep sleep. Deep sleep is a feature of the controller that
expects the controller to remain powered in suspend. However, if a
display shares its regulator with the touch controller, we may want to
do a power off so that the display and touch controller do not use any
power.

Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 Documentation/devicetree/bindings/input/atmel,maxtouch.yaml | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
index c40799355ed7..8de5f539b30e 100644
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
@@ -87,6 +87,12 @@  properties:
       - 2 # ATMEL_MXT_WAKEUP_GPIO
     default: 0
 
+  atmel,poweroff-sleep:
+    description: |
+      Instead of using the deep sleep feature of the maXTouch controller,
+      poweroff the regulators.
+    type: boolean
+
   wakeup-source:
     type: boolean