| Message ID | 20240326-feature_poe-v6-14-c1011b6ea1cb@bootlin.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | None | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/patch-applied | success | |
| robh/dtbs-check | warning | build log |
| robh/dt-meta-schema | success |
On Tue, Mar 26, 2024 at 03:04:51PM +0100, Kory Maincent wrote: > From: Kory Maincent (Dent Project) <kory.maincent@bootlin.com> > > Add the PD692x0 I2C Power Sourcing Equipment controller device tree > bindings documentation. > > Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Andrew
On Tue, Mar 26, 2024 at 03:04:51PM +0100, Kory Maincent wrote: > From: Kory Maincent (Dent Project) <kory.maincent@bootlin.com> > > Add the PD692x0 I2C Power Sourcing Equipment controller device tree > bindings documentation. > > Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> > --- > > Changes in v2: > - Enhance ports-matrix description. > - Replace additionalProperties by unevaluatedProperties. > - Drop i2c suffix. > > Changes in v3: > - Remove ports-matrix parameter. > - Add description of all physical ports and managers. > - Add pse_pis subnode moving to the API of pse-controller binding. > - Remove the MAINTAINERS section for this driver as I will be maintaining > all pse-pd subsystem. > > Changes in v5: > - Remove defs used only once. > - Replace underscore by dash. > - Add description. > --- > .../bindings/net/pse-pd/microchip,pd692x0.yaml | 158 +++++++++++++++++++++ > 1 file changed, 158 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/pse-pd/microchip,pd692x0.yaml b/Documentation/devicetree/bindings/net/pse-pd/microchip,pd692x0.yaml > new file mode 100644 > index 000000000000..62ea4363cba3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/pse-pd/microchip,pd692x0.yaml > @@ -0,0 +1,158 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/pse-pd/microchip,pd692x0.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Microchip PD692x0 Power Sourcing Equipment controller > + > +maintainers: > + - Kory Maincent <kory.maincent@bootlin.com> > + > +allOf: > + - $ref: pse-controller.yaml# > + > +properties: > + compatible: > + enum: > + - microchip,pd69200 > + - microchip,pd69210 > + - microchip,pd69220 > + > + reg: > + maxItems: 1 > + > + managers: > + type: object > + description: > + List of the PD69208T4/PD69204T4/PD69208M PSE managers. Each manager > + have 4 or 8 physical ports according to the chip version. No need to > + specify the SPI chip select as it is automatically detected by the > + PD692x0 PSE controller. The PSE managers have to be described from > + the lowest chip select to the greatest one, which is the detection > + behavior of the PD692x0 PSE controller. The PD692x0 support up to > + 12 PSE managers which can expose up to 96 physical ports. All > + physical ports available on a manager have to be described in the > + incremental order even if they are not used. > + > + properties: > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > + required: > + - "#address-cells" > + - "#size-cells" > + > + patternProperties: > + "^manager@0[0-9]|1[0-2]$": Unit-addresses are typically in hex. Is 'manager' something specific to this device or should be common? > + $ref: /schemas/graph.yaml#/properties/ports This is not using the graph binding. Furthermore, I don't want to see new cases of 'port' node names which are not graph nodes. We have it already with ethernet switches, but 'ethernet-port' is preferred over 'port'. Why is this one 'managers' and the other device binding 'channels'? > + description: > + PD69208T4/PD69204T4/PD69208M PSE manager exposing 4 or 8 physical > + ports. > + > + properties: > + reg: > + description: > + Incremental index of the PSE manager starting from 0, ranging > + from lowest to highest chip select, up to 12. > + maxItems: 1 > + > + patternProperties: > + '^port@[0-7]$': > + type: object > + required: > + - reg Any property you want is allowed in this node. You are missing 'additionalProperties'. > + > + required: > + - reg > + > +required: > + - compatible > + - reg > + - pse-pis > + > +unevaluatedProperties: false > + > +examples: > + - | > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + ethernet-pse@3c { > + compatible = "microchip,pd69200"; > + reg = <0x3c>; > + > + managers { > + #address-cells = <1>; > + #size-cells = <0>; > + > + manager@0 { > + reg = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + phys0: port@0 { > + reg = <0>; > + }; > + > + phys1: port@1 { > + reg = <1>; > + }; > + > + phys2: port@2 { > + reg = <2>; > + }; > + > + phys3: port@3 { > + reg = <3>; > + }; > + }; > + > + manager@1 { > + reg = <1>; > + #address-cells = <1>; > + #size-cells = <0>; > + > + phys4: port@0 { > + reg = <0>; > + }; > + > + phys5: port@1 { > + reg = <1>; > + }; > + > + phys6: port@2 { > + reg = <2>; > + }; > + > + phys7: port@3 { > + reg = <3>; > + }; > + }; > + }; > + > + pse-pis { > + #address-cells = <1>; > + #size-cells = <0>; > + > + pse_pi0: pse-pi@0 { > + reg = <0>; > + #pse-cells = <0>; > + pairset-names = "alternative-a", "alternative-b"; > + pairsets = <&phys0>, <&phys1>; It is very strange that you are describing the connections within a device. > + polarity-supported = "MDI", "S"; > + }; > + pse_pi1: pse-pi@1 { > + reg = <1>; > + #pse-cells = <0>; > + pairset-names = "alternative-a"; > + pairsets = <&phys2>; > + polarity-supported = "MDI"; > + }; > + }; > + }; > + }; > > -- > 2.25.1 >
On Tue, 2 Apr 2024 08:28:34 -0500 Rob Herring <robh@kernel.org> wrote: > > + patternProperties: > > + "^manager@0[0-9]|1[0-2]$": > > Unit-addresses are typically in hex. > > Is 'manager' something specific to this device or should be common? Specific to this device. > > + $ref: /schemas/graph.yaml#/properties/ports > > This is not using the graph binding. Furthermore, I don't want to see > new cases of 'port' node names which are not graph nodes. We have it > already with ethernet switches, but 'ethernet-port' is preferred over > 'port'. Ok I will remove the ref then. > Why is this one 'managers' and the other device binding 'channels'? Here each manager can have up to 8 ports. The ports in tps23881 are called channels in the datasheet but I can use the port naming for both if you prefer. > > + description: > > + PD69208T4/PD69204T4/PD69208M PSE manager exposing 4 or 8 physical > > + ports. > > + > > + properties: > > + reg: > > + description: > > + Incremental index of the PSE manager starting from 0, ranging > > + from lowest to highest chip select, up to 12. > > + maxItems: 1 > > + > > + patternProperties: > > + '^port@[0-7]$': > > + type: object > > + required: > > + - reg > > Any property you want is allowed in this node. You are missing > 'additionalProperties'. Indeed. Regards,
diff --git a/Documentation/devicetree/bindings/net/pse-pd/microchip,pd692x0.yaml b/Documentation/devicetree/bindings/net/pse-pd/microchip,pd692x0.yaml new file mode 100644 index 000000000000..62ea4363cba3 --- /dev/null +++ b/Documentation/devicetree/bindings/net/pse-pd/microchip,pd692x0.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/pse-pd/microchip,pd692x0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PD692x0 Power Sourcing Equipment controller + +maintainers: + - Kory Maincent <kory.maincent@bootlin.com> + +allOf: + - $ref: pse-controller.yaml# + +properties: + compatible: + enum: + - microchip,pd69200 + - microchip,pd69210 + - microchip,pd69220 + + reg: + maxItems: 1 + + managers: + type: object + description: + List of the PD69208T4/PD69204T4/PD69208M PSE managers. Each manager + have 4 or 8 physical ports according to the chip version. No need to + specify the SPI chip select as it is automatically detected by the + PD692x0 PSE controller. The PSE managers have to be described from + the lowest chip select to the greatest one, which is the detection + behavior of the PD692x0 PSE controller. The PD692x0 support up to + 12 PSE managers which can expose up to 96 physical ports. All + physical ports available on a manager have to be described in the + incremental order even if they are not used. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + required: + - "#address-cells" + - "#size-cells" + + patternProperties: + "^manager@0[0-9]|1[0-2]$": + $ref: /schemas/graph.yaml#/properties/ports + description: + PD69208T4/PD69204T4/PD69208M PSE manager exposing 4 or 8 physical + ports. + + properties: + reg: + description: + Incremental index of the PSE manager starting from 0, ranging + from lowest to highest chip select, up to 12. + maxItems: 1 + + patternProperties: + '^port@[0-7]$': + type: object + required: + - reg + + required: + - reg + +required: + - compatible + - reg + - pse-pis + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-pse@3c { + compatible = "microchip,pd69200"; + reg = <0x3c>; + + managers { + #address-cells = <1>; + #size-cells = <0>; + + manager@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + phys0: port@0 { + reg = <0>; + }; + + phys1: port@1 { + reg = <1>; + }; + + phys2: port@2 { + reg = <2>; + }; + + phys3: port@3 { + reg = <3>; + }; + }; + + manager@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + phys4: port@0 { + reg = <0>; + }; + + phys5: port@1 { + reg = <1>; + }; + + phys6: port@2 { + reg = <2>; + }; + + phys7: port@3 { + reg = <3>; + }; + }; + }; + + pse-pis { + #address-cells = <1>; + #size-cells = <0>; + + pse_pi0: pse-pi@0 { + reg = <0>; + #pse-cells = <0>; + pairset-names = "alternative-a", "alternative-b"; + pairsets = <&phys0>, <&phys1>; + polarity-supported = "MDI", "S"; + }; + pse_pi1: pse-pi@1 { + reg = <1>; + #pse-cells = <0>; + pairset-names = "alternative-a"; + pairsets = <&phys2>; + polarity-supported = "MDI"; + }; + }; + }; + };