| Message ID | 20240229082337.3090778-1-parthiban@linumiz.com |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [1/2] dt-bindings: arm: fsl: Add Seeed studio NPi based boards | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/patch-applied | success | |
| robh/dtbs-check | warning | build log |
| robh/dt-meta-schema | success |
On 29/02/2024 09:23, Parthiban Nallathambi wrote: > NPi i.MX6ULL eMMC/NAND is Seed Studios SoM using i.MX6ULL. > Development baords can be either based on NAND or eMMC > SoM. > > Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- This is an automated instruction, just in case, because many review tags are being ignored. If you know the process, you can skip it (please do not feel offended by me posting it here - no bad intentions intended). If you do not know the process, here is a short explanation: Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions, under or above your Signed-off-by tag. Tag is "received", when provided in a message replied to you on the mailing list. Tools like b4 can help here. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for tags received on the version they apply. https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577 Best regards, Krzysztof
On Thu, 29 Feb 2024 13:53:36 +0530, Parthiban Nallathambi wrote: > NPi i.MX6ULL eMMC/NAND is Seed Studios SoM using i.MX6ULL. > Development baords can be either based on NAND or eMMC > SoM. > > Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com> > --- > Documentation/devicetree/bindings/arm/fsl.yaml | 8 ++++++++ > 1 file changed, 8 insertions(+) > My bot found new DT warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dtb nxp/imx/imx6ull-seeed-npi-dev-board-nand.dtb' for 20240229082337.3090778-1-parthiban@linumiz.com: arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dtb: /soc/bus@2000000/touchscreen@2040000: failed to match any schema with compatible: ['fsl,imx6ul-tsc'] arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dtb: /soc/bus@2000000/touchscreen@2040000: failed to match any schema with compatible: ['fsl,imx6ul-tsc'] arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dtb: /soc/bus@2000000/anatop@20c8000: failed to match any schema with compatible: ['fsl,imx6ul-anatop', 'fsl,imx6q-anatop', 'syscon', 'simple-mfd'] arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dtb: /soc/bus@2000000/anatop@20c8000: failed to match any schema with compatible: ['fsl,imx6ul-anatop', 'fsl,imx6q-anatop', 'syscon', 'simple-mfd'] arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dtb: /soc/bus@2000000/anatop@20c8000: failed to match any schema with compatible: ['fsl,imx6ul-anatop', 'fsl,imx6q-anatop', 'syscon', 'simple-mfd'] arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dtb: /soc/bus@2000000/anatop@20c8000: failed to match any schema with compatible: ['fsl,imx6ul-anatop', 'fsl,imx6q-anatop', 'syscon', 'simple-mfd'] arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dtb: /soc/bus@2000000/pinctrl@20e0000: failed to match any schema with compatible: ['fsl,imx6ul-iomuxc'] arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dtb: /soc/bus@2000000/pinctrl@20e0000: failed to match any schema with compatible: ['fsl,imx6ul-iomuxc'] arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dtb: /soc/bus@2000000/iomuxc-gpr@20e4000: failed to match any schema with compatible: ['fsl,imx6ul-iomuxc-gpr', 'fsl,imx6q-iomuxc-gpr', 'syscon'] arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dtb: /soc/bus@2000000/iomuxc-gpr@20e4000: failed to match any schema with compatible: ['fsl,imx6ul-iomuxc-gpr', 'fsl,imx6q-iomuxc-gpr', 'syscon'] arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dtb: /soc/bus@2000000/iomuxc-gpr@20e4000: failed to match any schema with compatible: ['fsl,imx6ul-iomuxc-gpr', 'fsl,imx6q-iomuxc-gpr', 'syscon'] arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dtb: /soc/bus@2000000/iomuxc-gpr@20e4000: failed to match any schema with compatible: ['fsl,imx6ul-iomuxc-gpr', 'fsl,imx6q-iomuxc-gpr', 'syscon'] arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dtb: /soc/bus@2200000/pinctrl@2290000: failed to match any schema with compatible: ['fsl,imx6ull-iomuxc-snvs'] arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dtb: /soc/bus@2200000/pinctrl@2290000: failed to match any schema with compatible: ['fsl,imx6ull-iomuxc-snvs']
Dear Rob, On 2/29/24 19:05, Rob Herring wrote: > > On Thu, 29 Feb 2024 13:53:36 +0530, Parthiban Nallathambi wrote: >> NPi i.MX6ULL eMMC/NAND is Seed Studios SoM using i.MX6ULL. >> Development baords can be either based on NAND or eMMC >> SoM. >> >> Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com> >> --- >> Documentation/devicetree/bindings/arm/fsl.yaml | 8 ++++++++ >> 1 file changed, 8 insertions(+) >> > > > My bot found new DT warnings on the .dts files added or changed in this > series. > > Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings > are fixed by another series. Ultimately, it is up to the platform > maintainer whether these warnings are acceptable or not. Yes I noticed the same in my end. AFAIK these warnings are from existing dtsi. Quick check different dtb resulted the same, make CHECK_DTBS=y ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabihf- nxp/imx/imx6ull-tarragon-master.dtb O=./master -j32 make[1]: Entering directory '/home/parthiban/data/parthiban/mainline/linux/master' DTC_CHK arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dtb arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dtb: /soc/bus@2000000/spba-bus@2000000/spi@200c000/ethernet@0: failed to match any schema with compatible: ['qca,qca7000'] arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dtb: /soc/bus@2000000/spba-bus@2000000/spi@2014000/ethernet@0: failed to match any schema with compatible: ['qca,qca7000'] arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dtb: /soc/bus@2000000/spba-bus@2000000/asrc@2034000: failed to match any schema with compatible: ['fsl,imx6ul-asrc', 'fsl,imx53-asrc'] arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dtb: /soc/bus@2000000/spba-bus@2000000/asrc@2034000: failed to match any schema with compatible: ['fsl,imx6ul-asrc', 'fsl,imx53-asrc'] arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dtb: /soc/bus@2000000/tsc@2040000: failed to match any schema with compatible: ['fsl,imx6ul-tsc'] arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dtb: /soc/bus@2000000/anatop@20c8000: failed to match any schema with compatible: ['fsl,imx6ul-anatop', 'fsl,imx6q-anatop', 'syscon', 'simple-mfd'] arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dtb: /soc/bus@2000000/anatop@20c8000: failed to match any schema with compatible: ['fsl,imx6ul-anatop', 'fsl,imx6q-anatop', 'syscon', 'simple-mfd'] /home/parthiban/data/parthiban/mainline/linux/master/arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dtb: tempmon: '#thermal-sensor-cells' is a required property from schema $id: http://devicetree.org/schemas/thermal/imx-thermal.yaml# arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dtb: /soc/bus@2000000/pinctrl@20e0000: failed to match any schema with compatible: ['fsl,imx6ul-iomuxc'] arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dtb: /soc/bus@2000000/iomuxc-gpr@20e4000: failed to match any schema with compatible: ['fsl,imx6ul-iomuxc-gpr', 'fsl,imx6q-iomuxc-gpr', 'syscon'] arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dtb: /soc/bus@2000000/iomuxc-gpr@20e4000: failed to match any schema with compatible: ['fsl,imx6ul-iomuxc-gpr', 'fsl,imx6q-iomuxc-gpr', 'syscon'] arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dtb: /soc/bus@2100000/weim@21b8000: failed to match any schema with compatible: ['fsl,imx6ul-weim', 'fsl,imx6q-weim'] arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dtb: /soc/bus@2100000/weim@21b8000: failed to match any schema with compatible: ['fsl,imx6ul-weim', 'fsl,imx6q-weim'] arch/arm/boot/dts/nxp/imx/imx6ull-tarragon-master.dtb: /soc/bus@2200000/iomuxc-snvs@2290000: failed to match any schema with compatible: ['fsl,imx6ull-iomuxc-snvs'] make[1]: Leaving directory '/home/parthiban/data/parthiban/mainline/linux/master' > > If you already ran DT checks and didn't see these error(s), then > make sure dt-schema is up to date: > > pip3 install dtschema --upgrade Thanks, am already using the latest version. Thanks, Parthiban N > > > New warnings running 'make CHECK_DTBS=y nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dtb nxp/imx/imx6ull-seeed-npi-dev-board-nand.dtb' for 20240229082337.3090778-1-parthiban@linumiz.com: > > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dtb: /soc/bus@2000000/touchscreen@2040000: failed to match any schema with compatible: ['fsl,imx6ul-tsc'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dtb: /soc/bus@2000000/touchscreen@2040000: failed to match any schema with compatible: ['fsl,imx6ul-tsc'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dtb: /soc/bus@2000000/anatop@20c8000: failed to match any schema with compatible: ['fsl,imx6ul-anatop', 'fsl,imx6q-anatop', 'syscon', 'simple-mfd'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dtb: /soc/bus@2000000/anatop@20c8000: failed to match any schema with compatible: ['fsl,imx6ul-anatop', 'fsl,imx6q-anatop', 'syscon', 'simple-mfd'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dtb: /soc/bus@2000000/anatop@20c8000: failed to match any schema with compatible: ['fsl,imx6ul-anatop', 'fsl,imx6q-anatop', 'syscon', 'simple-mfd'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dtb: /soc/bus@2000000/anatop@20c8000: failed to match any schema with compatible: ['fsl,imx6ul-anatop', 'fsl,imx6q-anatop', 'syscon', 'simple-mfd'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dtb: /soc/bus@2000000/pinctrl@20e0000: failed to match any schema with compatible: ['fsl,imx6ul-iomuxc'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dtb: /soc/bus@2000000/pinctrl@20e0000: failed to match any schema with compatible: ['fsl,imx6ul-iomuxc'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dtb: /soc/bus@2000000/iomuxc-gpr@20e4000: failed to match any schema with compatible: ['fsl,imx6ul-iomuxc-gpr', 'fsl,imx6q-iomuxc-gpr', 'syscon'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dtb: /soc/bus@2000000/iomuxc-gpr@20e4000: failed to match any schema with compatible: ['fsl,imx6ul-iomuxc-gpr', 'fsl,imx6q-iomuxc-gpr', 'syscon'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dtb: /soc/bus@2000000/iomuxc-gpr@20e4000: failed to match any schema with compatible: ['fsl,imx6ul-iomuxc-gpr', 'fsl,imx6q-iomuxc-gpr', 'syscon'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dtb: /soc/bus@2000000/iomuxc-gpr@20e4000: failed to match any schema with compatible: ['fsl,imx6ul-iomuxc-gpr', 'fsl,imx6q-iomuxc-gpr', 'syscon'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dtb: /soc/bus@2200000/pinctrl@2290000: failed to match any schema with compatible: ['fsl,imx6ull-iomuxc-snvs'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dtb: /soc/bus@2200000/pinctrl@2290000: failed to match any schema with compatible: ['fsl,imx6ull-iomuxc-snvs'] > > > > >
Dear Rob, On 2/29/24 19:05, Rob Herring wrote: > > On Thu, 29 Feb 2024 13:53:36 +0530, Parthiban Nallathambi wrote: >> NPi i.MX6ULL eMMC/NAND is Seed Studios SoM using i.MX6ULL. >> Development baords can be either based on NAND or eMMC >> SoM. >> >> Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com> >> --- >> Documentation/devicetree/bindings/arm/fsl.yaml | 8 ++++++++ >> 1 file changed, 8 insertions(+) >> > > > My bot found new DT warnings on the .dts files added or changed in this > series. > > Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings > are fixed by another series. Ultimately, it is up to the platform https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=830038 patch series which is fixing the bindings issues. Thanks, Parthiban N > maintainer whether these warnings are acceptable or not. > > If you already ran DT checks and didn't see these error(s), then > make sure dt-schema is up to date: > > pip3 install dtschema --upgrade > > > New warnings running 'make CHECK_DTBS=y nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dtb nxp/imx/imx6ull-seeed-npi-dev-board-nand.dtb' for 20240229082337.3090778-1-parthiban@linumiz.com: > > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dtb: /soc/bus@2000000/touchscreen@2040000: failed to match any schema with compatible: ['fsl,imx6ul-tsc'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dtb: /soc/bus@2000000/touchscreen@2040000: failed to match any schema with compatible: ['fsl,imx6ul-tsc'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dtb: /soc/bus@2000000/anatop@20c8000: failed to match any schema with compatible: ['fsl,imx6ul-anatop', 'fsl,imx6q-anatop', 'syscon', 'simple-mfd'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dtb: /soc/bus@2000000/anatop@20c8000: failed to match any schema with compatible: ['fsl,imx6ul-anatop', 'fsl,imx6q-anatop', 'syscon', 'simple-mfd'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dtb: /soc/bus@2000000/anatop@20c8000: failed to match any schema with compatible: ['fsl,imx6ul-anatop', 'fsl,imx6q-anatop', 'syscon', 'simple-mfd'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dtb: /soc/bus@2000000/anatop@20c8000: failed to match any schema with compatible: ['fsl,imx6ul-anatop', 'fsl,imx6q-anatop', 'syscon', 'simple-mfd'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dtb: /soc/bus@2000000/pinctrl@20e0000: failed to match any schema with compatible: ['fsl,imx6ul-iomuxc'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dtb: /soc/bus@2000000/pinctrl@20e0000: failed to match any schema with compatible: ['fsl,imx6ul-iomuxc'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dtb: /soc/bus@2000000/iomuxc-gpr@20e4000: failed to match any schema with compatible: ['fsl,imx6ul-iomuxc-gpr', 'fsl,imx6q-iomuxc-gpr', 'syscon'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dtb: /soc/bus@2000000/iomuxc-gpr@20e4000: failed to match any schema with compatible: ['fsl,imx6ul-iomuxc-gpr', 'fsl,imx6q-iomuxc-gpr', 'syscon'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dtb: /soc/bus@2000000/iomuxc-gpr@20e4000: failed to match any schema with compatible: ['fsl,imx6ul-iomuxc-gpr', 'fsl,imx6q-iomuxc-gpr', 'syscon'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dtb: /soc/bus@2000000/iomuxc-gpr@20e4000: failed to match any schema with compatible: ['fsl,imx6ul-iomuxc-gpr', 'fsl,imx6q-iomuxc-gpr', 'syscon'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dtb: /soc/bus@2200000/pinctrl@2290000: failed to match any schema with compatible: ['fsl,imx6ull-iomuxc-snvs'] > arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dtb: /soc/bus@2200000/pinctrl@2290000: failed to match any schema with compatible: ['fsl,imx6ull-iomuxc-snvs'] > > > > >
On Thu, Feb 29, 2024 at 01:53:37PM +0530, Parthiban Nallathambi wrote: > Add support for Seed Stuidos NPi i.MX6ULL SoM equipped with > 512MB RAM and 8GB eMMC or 512MB NAND flash. Development > board comes with either eMMC or NAND based SoM with peripheral > interfaces like 2 x ethernet, 2 x USB, LCD, CSI and more. > > Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com> > --- > arch/arm/boot/dts/nxp/imx/Makefile | 2 + > .../imx/imx6ull-seeed-npi-dev-board-emmc.dts | 19 + > .../imx/imx6ull-seeed-npi-dev-board-nand.dts | 19 + > .../nxp/imx/imx6ull-seeed-npi-dev-board.dtsi | 424 ++++++++++++++++++ > .../boot/dts/nxp/imx/imx6ull-seeed-npi.dtsi | 155 +++++++ > 5 files changed, 619 insertions(+) > create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dts > create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dts > create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi > create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi.dtsi Could you elaborate a bit the point of splitting imx6ull-seeed-npi.dtsi and imx6ull-seeed-npi-dev-board.dtsi? Why cannot they be a single file? Shawn
Dear Shawn, On 3/29/24 09:30, Shawn Guo wrote: > On Thu, Feb 29, 2024 at 01:53:37PM +0530, Parthiban Nallathambi wrote: >> Add support for Seed Stuidos NPi i.MX6ULL SoM equipped with >> 512MB RAM and 8GB eMMC or 512MB NAND flash. Development >> board comes with either eMMC or NAND based SoM with peripheral >> interfaces like 2 x ethernet, 2 x USB, LCD, CSI and more. >> >> Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com> >> --- >> arch/arm/boot/dts/nxp/imx/Makefile | 2 + >> .../imx/imx6ull-seeed-npi-dev-board-emmc.dts | 19 + >> .../imx/imx6ull-seeed-npi-dev-board-nand.dts | 19 + >> .../nxp/imx/imx6ull-seeed-npi-dev-board.dtsi | 424 ++++++++++++++++++ >> .../boot/dts/nxp/imx/imx6ull-seeed-npi.dtsi | 155 +++++++ >> 5 files changed, 619 insertions(+) >> create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-emmc.dts >> create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board-nand.dts >> create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi-dev-board.dtsi >> create mode 100644 arch/arm/boot/dts/nxp/imx/imx6ull-seeed-npi.dtsi > > Could you elaborate a bit the point of splitting imx6ull-seeed-npi.dtsi > and imx6ull-seeed-npi-dev-board.dtsi? Why cannot they be a single file? imx6ull-seeed-npi.dtsi is for the npi SoM and -dev-board is for the board which uses the SoM. Thanks, Parthiban N > > Shawn >
On Thu, Feb 29, 2024 at 01:53:36PM +0530, Parthiban Nallathambi wrote: > NPi i.MX6ULL eMMC/NAND is Seed Studios SoM using i.MX6ULL. > Development baords can be either based on NAND or eMMC > SoM. > > Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com> Applied both, thanks!
diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml index 228dcc5c7d6f..dfe9ddd0872b 100644 --- a/Documentation/devicetree/bindings/arm/fsl.yaml +++ b/Documentation/devicetree/bindings/arm/fsl.yaml @@ -810,6 +810,14 @@ properties: - const: tq,imx6ull-tqma6ull2l # MCIMX6Y2, LGA SoM variant - const: fsl,imx6ull + - description: Seeed Stuido i.MX6ULL SoM on dev boards + items: + - enum: + - seeed,imx6ull-seeed-npi-emmc + - seeed,imx6ull-seeed-npi-nand + - const: seeed,imx6ull-seeed-npi + - const: fsl,imx6ull + - description: i.MX6ULZ based Boards items: - enum:
NPi i.MX6ULL eMMC/NAND is Seed Studios SoM using i.MX6ULL. Development baords can be either based on NAND or eMMC SoM. Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com> --- Documentation/devicetree/bindings/arm/fsl.yaml | 8 ++++++++ 1 file changed, 8 insertions(+)