diff mbox series

[v3,2/6] dt-bindings: PCI: qcom,pcie-sm8450: move SM8450 to dedicated schema

Message ID 20240126-dt-bindings-pci-qcom-split-v3-2-f23cda4d74c0@linaro.org
State Not Applicable
Headers show
Series dt-bindings: PCI: qcom: move to dedicated schema (part one) | expand

Checks

Context Check Description
robh/checkpatch success
robh/patch-applied success
robh/dtbs-check warning build log
robh/dt-meta-schema success

Commit Message

Krzysztof Kozlowski Jan. 26, 2024, 8:56 a.m. UTC 
Move SM8450 PCIe devices from qcom,pcie.yaml binding to a dedicated file
to make reviewing easier.

This creates equivalent schema file, except:
 - Missing required compatible which is actually redundant.
 - Expecting eight MSI interrupts, instead of only one, which was
   incomplete hardware description.

Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/pci/qcom,pcie-sm8450.yaml  | 178 +++++++++++++++++++++
 .../devicetree/bindings/pci/qcom,pcie.yaml         |  67 --------
 2 files changed, 178 insertions(+), 67 deletions(-)

Comments

Rob Herring (Arm) Jan. 30, 2024, 10:49 p.m. UTC | #1 
On Fri, 26 Jan 2024 09:56:43 +0100, Krzysztof Kozlowski wrote:
> Move SM8450 PCIe devices from qcom,pcie.yaml binding to a dedicated file
> to make reviewing easier.
> 
> This creates equivalent schema file, except:
>  - Missing required compatible which is actually redundant.
>  - Expecting eight MSI interrupts, instead of only one, which was
>    incomplete hardware description.
> 
> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../devicetree/bindings/pci/qcom,pcie-sm8450.yaml  | 178 +++++++++++++++++++++
>  .../devicetree/bindings/pci/qcom,pcie.yaml         |  67 --------
>  2 files changed, 178 insertions(+), 67 deletions(-)
> 

Reviewed-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml
new file mode 100644
index 000000000000..1496d6993ab4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml
@@ -0,0 +1,178 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8450.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SM8450 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SM8450 SoC PCIe root complex controller is based on the Synopsys
+  DesignWare PCIe IP.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pcie-sm8450-pcie0
+      - qcom,pcie-sm8450-pcie1
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 11
+    maxItems: 12
+
+  clock-names:
+    minItems: 11
+    items:
+      - const: pipe # PIPE clock
+      - const: pipe_mux # PIPE MUX
+      - const: phy_pipe # PIPE output clock
+      - const: ref # REFERENCE clock
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: ddrss_sf_tbu # PCIe SF TBU clock
+      - enum: [aggre0, aggre1] # Aggre NoC PCIe0/1 AXI clock
+      - const: aggre1 # Aggre NoC PCIe1 AXI clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: pci
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,sm8450.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c00000 {
+            compatible = "qcom,pcie-sm8450-pcie0";
+            reg = <0 0x01c00000 0 0x3000>,
+                  <0 0x60000000 0 0xf1d>,
+                  <0 0x60000f20 0 0xa8>,
+                  <0 0x60001000 0 0x1000>,
+                  <0 0x60100000 0 0x100000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            max-link-speed = <2>;
+            num-lanes = <1>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+                     <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
+                     <&pcie0_phy>,
+                     <&rpmhcc RPMH_CXO_CLK>,
+                     <&gcc GCC_PCIE_0_AUX_CLK>,
+                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
+                     <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
+            clock-names = "pipe",
+                          "pipe_mux",
+                          "phy_pipe",
+                          "ref",
+                          "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "ddrss_sf_tbu",
+                          "aggre0",
+                          "aggre1";
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3",
+                              "msi4", "msi5", "msi6", "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+            msi-map = <0x0 &gic_its 0x5981 0x1>,
+                      <0x100 &gic_its 0x5980 0x1>;
+            msi-map-mask = <0xff00>;
+
+            iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
+                        <0x100 &apps_smmu 0x1c01 0x1>;
+
+            phys = <&pcie0_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-0 = <&pcie0_default_state>;
+            pinctrl-names = "default";
+
+            power-domains = <&gcc PCIE_0_GDSC>;
+
+            resets = <&gcc GCC_PCIE_0_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
index 3b7dd9a4ef60..791ddab8ddc7 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml
@@ -38,8 +38,6 @@  properties:
           - qcom,pcie-sm8150
           - qcom,pcie-sm8250
           - qcom,pcie-sm8350
-          - qcom,pcie-sm8450-pcie0
-          - qcom,pcie-sm8450-pcie1
       - items:
           - const: qcom,pcie-msm8998
           - const: qcom,pcie-msm8996
@@ -219,8 +217,6 @@  allOf:
               - qcom,pcie-sdx55
               - qcom,pcie-sm8250
               - qcom,pcie-sm8350
-              - qcom,pcie-sm8450-pcie0
-              - qcom,pcie-sm8450-pcie1
     then:
       properties:
         reg:
@@ -648,67 +644,6 @@  allOf:
           items:
             - const: pci # PCIe core reset
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sm8450-pcie0
-    then:
-      properties:
-        clocks:
-          minItems: 12
-          maxItems: 12
-        clock-names:
-          items:
-            - const: pipe # PIPE clock
-            - const: pipe_mux # PIPE MUX
-            - const: phy_pipe # PIPE output clock
-            - const: ref # REFERENCE clock
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: ddrss_sf_tbu # PCIe SF TBU clock
-            - const: aggre0 # Aggre NoC PCIe0 AXI clock
-            - const: aggre1 # Aggre NoC PCIe1 AXI clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,pcie-sm8450-pcie1
-    then:
-      properties:
-        clocks:
-          minItems: 11
-          maxItems: 11
-        clock-names:
-          items:
-            - const: pipe # PIPE clock
-            - const: pipe_mux # PIPE MUX
-            - const: phy_pipe # PIPE output clock
-            - const: ref # REFERENCE clock
-            - const: aux # Auxiliary clock
-            - const: cfg # Configuration clock
-            - const: bus_master # Master AXI clock
-            - const: bus_slave # Slave AXI clock
-            - const: slave_q2a # Slave Q2A clock
-            - const: ddrss_sf_tbu # PCIe SF TBU clock
-            - const: aggre1 # Aggre NoC PCIe1 AXI clock
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: pci # PCIe core reset
-
   - if:
       properties:
         compatible:
@@ -844,8 +779,6 @@  allOf:
               - qcom,pcie-sm8150
               - qcom,pcie-sm8250
               - qcom,pcie-sm8350
-              - qcom,pcie-sm8450-pcie0
-              - qcom,pcie-sm8450-pcie1
     then:
       oneOf:
         - properties: