[v3,1/2] dt-bindings: iio: pressure: add honeywell,hsc030

diff --git a/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml b/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml
new file mode 100644
index 000000000000..47f7a8202847
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/honeywell,hsc030pa.yaml
@@ -0,0 +1,133 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/honeywell,hsc030pa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Honeywell TruStability HSC and SSC pressure sensor series
+
+description: |
+  support for Honeywell TruStability HSC and SSC digital pressure sensor
+  series.
+
+  These sensors have either an I2C, an SPI or an analog interface. Only the
+  digital versions are supported by this driver.
+
+  There are 118 models with different pressure ranges available in each family.
+  The vendor calls them "HSC series" and "SSC series". All of them have an
+  identical programming model but differ in pressure range, unit and transfer
+  function.
+
+  To support different models one needs to specify the pressure range as well
+  as the transfer function. Pressure range can either be provided via
+  pressure-triplet (directly extracted from the part number) or in case it's
+  a custom chip via numerical range limits converted to pascals.
+
+  The transfer function defines the ranges of raw conversion values delivered
+  by the sensor. pmin-pascal and pmax-pascal corespond to the minimum and
+  maximum pressure that can be measured.
+
+  Please note that in case of an SPI-based sensor, the clock signal should not
+  exceed 800kHz and the MOSI signal is not required.
+
+  Specifications about the devices can be found at:
+  https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf
+  https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-ssc-series/documents/sps-siot-trustability-ssc-series-standard-accuracy-board-mount-pressure-sensors-50099533-a-en-ciid-151134.pdf
+
+maintainers:
+  - Petre Rodan <petre.rodan@subdimension.ro>
+
+properties:
+  compatible:
+    const: honeywell,hsc030pa
+
+  reg:
+    maxItems: 1
+
+  honeywell,transfer-function:
+    description: |
+      Transfer function which defines the range of valid values delivered by
+      the sensor.
+      0 - A, 10% to 90% of 2^14
+      1 - B, 5% to 95% of 2^14
+      2 - C, 5% to 85% of 2^14
+      3 - F, 4% to 94% of 2^14
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  honeywell,pressure-triplet:
+    description: |
+      Case-sensitive five character string that defines pressure range, unit
+      and type as part of the device nomenclature. In the unlikely case of a
+      custom chip, set to "NA" and provide pmin-pascal and pmax-pascal.
+    enum: [001BA, 1.6BA, 2.5BA, 004BA, 006BA, 010BA, 1.6MD, 2.5MD, 004MD,
+           006MD, 010MD, 016MD, 025MD, 040MD, 060MD, 100MD, 160MD, 250MD,
+           400MD, 600MD, 001BD, 1.6BD, 2.5BD, 004BD, 2.5MG, 004MG, 006MG,
+           010MG, 016MG, 025MG, 040MG, 060MG, 100MG, 160MG, 250MG, 400MG,
+           600MG, 001BG, 1.6BG, 2.5BG, 004BG, 006BG, 010BG, 100KA, 160KA,
+           250KA, 400KA, 600KA, 001GA, 160LD, 250LD, 400LD, 600LD, 001KD,
+           1.6KD, 2.5KD, 004KD, 006KD, 010KD, 016KD, 025KD, 040KD, 060KD,
+           100KD, 160KD, 250KD, 400KD, 250LG, 400LG, 600LG, 001KG, 1.6KG,
+           2.5KG, 004KG, 006KG, 010KG, 016KG, 025KG, 040KG, 060KG, 100KG,
+           160KG, 250KG, 400KG, 600KG, 001GG, 015PA, 030PA, 060PA, 100PA,
+           150PA, 0.5ND, 001ND, 002ND, 004ND, 005ND, 010ND, 020ND, 030ND,
+           001PD, 005PD, 015PD, 030PD, 060PD, 001NG, 002NG, 004NG, 005NG,
+           010NG, 020NG, 030NG, 001PG, 005PG, 015PG, 030PG, 060PG, 100PG,
+           150PG, NA]
+    $ref: /schemas/types.yaml#/definitions/string
+
+  honeywell,pmin-pascal:
+    description: |
+      Minimum pressure value the sensor can measure in pascal.
+      To be specified only if honeywell,pressure-triplet is set to "NA".
+    $ref: /schemas/types.yaml#/definitions/int32
+
+  honeywell,pmax-pascal:
+    description: |
+      Maximum pressure value the sensor can measure in pascal.
+      To be specified only if honeywell,pressure-triplet is set to "NA".
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  vdd-supply:
+    description:
+      Provide VDD power to the sensor (either 3.3V or 5V depending on the chip)
+
+  spi-max-frequency:
+    maximum: 800000
+
+required:
+  - compatible
+  - reg
+  - honeywell,transfer-function
+  - honeywell,pressure-triplet
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@28 {
+            compatible = "honeywell,hsc030pa";
+            reg = <0x28>;
+            honeywell,transfer-function = <0>;
+            honeywell,pressure-triplet = "030PA";
+        };
+    };
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@0 {
+            compatible = "honeywell,hsc030pa";
+            reg = <0>;
+            spi-max-frequency = <800000>;
+            honeywell,transfer-function = <0>;
+            honeywell,pressure-triplet = "NA";
+            honeywell,pmin-pascal = <0>;
+            honeywell,pmax-pascal = <200000>;
+        };
+    };
+...