diff mbox series

[v2,02/12] dt-bindings: display: msm: Add reg bus and rotator interconnects

Message ID 20231125-topic-rb1_feat-v2-2-979b28f35e4a@linaro.org
State Not Applicable
Headers show
Series RB1/QCM2290 features | expand

Checks

Context Check Description
robh/checkpatch success
robh/patch-applied success
robh/dtbs-check warning build log
robh/dt-meta-schema success

Commit Message

Konrad Dybcio Nov. 27, 2023, 3:28 p.m. UTC 
Apart from the already handled data bus (MAS_MDP_Pn<->DDR), there are
other connection paths:
- a path that connects rotator block to the DDR.
- a path that needs to be handled to ensure MDSS register access
  functions properly, namely the "reg bus", a.k.a the CPU-MDSS CFG
  interconnect.

Describe these paths to allow using them in device trees and in the
driver.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[Konrad: rework for one vs two MDP paths, update examples]
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 .../devicetree/bindings/display/msm/mdss-common.yaml   | 18 ++++++++++++++----
 .../bindings/display/msm/qcom,qcm2290-mdss.yaml        | 14 ++++++++++----
 .../bindings/display/msm/qcom,sc7180-mdss.yaml         | 14 ++++++++++----
 .../bindings/display/msm/qcom,sc7280-mdss.yaml         | 14 ++++++++++----
 .../bindings/display/msm/qcom,sm6115-mdss.yaml         | 10 ++++++++++
 .../bindings/display/msm/qcom,sm6125-mdss.yaml         |  8 ++++++--
 .../bindings/display/msm/qcom,sm6350-mdss.yaml         |  8 ++++++--
 .../bindings/display/msm/qcom,sm6375-mdss.yaml         |  8 ++++++--
 .../bindings/display/msm/qcom,sm8450-mdss.yaml         | 13 ++++++++-----
 9 files changed, 80 insertions(+), 27 deletions(-)

Comments

Krzysztof Kozlowski Nov. 28, 2023, 8:23 a.m. UTC | #1 
On 27/11/2023 16:28, Konrad Dybcio wrote:
> Apart from the already handled data bus (MAS_MDP_Pn<->DDR), there are
> other connection paths:
> - a path that connects rotator block to the DDR.
> - a path that needs to be handled to ensure MDSS register access
>   functions properly, namely the "reg bus", a.k.a the CPU-MDSS CFG
>   interconnect.
> 
> Describe these paths to allow using them in device trees and in the
> driver.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> [Konrad: rework for one vs two MDP paths, update examples]
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---

Thanks, looks good.


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
index f69196e4cc76..c6305a6e0334 100644
--- a/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
+++ b/Documentation/devicetree/bindings/display/msm/mdss-common.yaml
@@ -61,17 +61,27 @@  properties:
 
   ranges: true
 
+  # This is not a perfect description, but it's impossible to discern and match
+  # the entries like we do with interconnect-names
   interconnects:
     minItems: 1
     items:
       - description: Interconnect path from mdp0 (or a single mdp) port to the data bus
       - description: Interconnect path from mdp1 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
 
   interconnect-names:
-    minItems: 1
-    items:
-      - const: mdp0-mem
-      - const: mdp1-mem
+    oneOf:
+      - minItems: 1
+        items:
+          - const: mdp0-mem
+          - const: cpu-cfg
+
+      - minItems: 2
+        items:
+          - const: mdp0-mem
+          - const: mdp1-mem
+          - const: cpu-cfg
 
   resets:
     items:
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
index d71a8e09a798..f0cdb5422688 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,qcm2290-mdss.yaml
@@ -36,10 +36,14 @@  properties:
     maxItems: 2
 
   interconnects:
-    maxItems: 1
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
 
   interconnect-names:
-    maxItems: 1
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
 
 patternProperties:
   "^display-controller@[0-9a-f]+$":
@@ -98,8 +102,10 @@  examples:
         interrupt-controller;
         #interrupt-cells = <1>;
 
-        interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>;
-        interconnect-names = "mdp0-mem";
+        interconnects = <&mmrt_virt MASTER_MDP0 &bimc SLAVE_EBI1>,
+                        <&bimc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>;
+        interconnect-names = "mdp0-mem",
+                             "cpu-cfg";
 
         iommus = <&apps_smmu 0x420 0x2>,
                  <&apps_smmu 0x421 0x0>;
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml
index 3432a2407caa..7a0555b15ddf 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7180-mdss.yaml
@@ -36,10 +36,14 @@  properties:
     maxItems: 1
 
   interconnects:
-    maxItems: 1
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
 
   interconnect-names:
-    maxItems: 1
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
 
 patternProperties:
   "^display-controller@[0-9a-f]+$":
@@ -106,8 +110,10 @@  examples:
         interrupt-controller;
         #interrupt-cells = <1>;
 
-        interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
-        interconnect-names = "mdp0-mem";
+        interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>,
+                        <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>;
+        interconnect-names = "mdp0-mem",
+                             "cpu-cfg";
 
         iommus = <&apps_smmu 0x800 0x2>;
         ranges;
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml
index bbb727831fca..2947f27e0585 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sc7280-mdss.yaml
@@ -36,10 +36,14 @@  properties:
     maxItems: 1
 
   interconnects:
-    maxItems: 1
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
 
   interconnect-names:
-    maxItems: 1
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
 
 patternProperties:
   "^display-controller@[0-9a-f]+$":
@@ -118,8 +122,10 @@  examples:
         interrupt-controller;
         #interrupt-cells = <1>;
 
-        interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>;
-        interconnect-names = "mdp0-mem";
+        interconnects = <&mmss_noc MASTER_MDP0 &mc_virt SLAVE_EBI1>,
+                        <&gem_noc MASTER_APPSS_PROC &cnoc2 SLAVE_DISPLAY_CFG>;
+        interconnect-names = "mdp0-mem",
+                             "cpu-cfg";
 
         iommus = <&apps_smmu 0x900 0x402>;
         ranges;
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
index dde5c2acead5..309de1953c88 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6115-mdss.yaml
@@ -29,6 +29,16 @@  properties:
   iommus:
     maxItems: 2
 
+  interconnects:
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
+
+  interconnect-names:
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
+
 patternProperties:
   "^display-controller@[0-9a-f]+$":
     type: object
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml
index 671c2c2aa896..3deb9dc81c9c 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6125-mdss.yaml
@@ -35,10 +35,14 @@  properties:
     maxItems: 1
 
   interconnects:
-    maxItems: 2
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
 
   interconnect-names:
-    maxItems: 2
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
 
 patternProperties:
   "^display-controller@[0-9a-f]+$":
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml
index e1dcb453762e..c9ba1fae8042 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6350-mdss.yaml
@@ -35,10 +35,14 @@  properties:
     maxItems: 1
 
   interconnects:
-    maxItems: 2
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
 
   interconnect-names:
-    maxItems: 2
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
 
 patternProperties:
   "^display-controller@[0-9a-f]+$":
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml
index b15c3950f09d..8e8a288d318c 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6375-mdss.yaml
@@ -35,10 +35,14 @@  properties:
     maxItems: 1
 
   interconnects:
-    maxItems: 2
+    items:
+      - description: Interconnect path from mdp0 port to the data bus
+      - description: Interconnect path from CPU to the reg bus
 
   interconnect-names:
-    maxItems: 2
+    items:
+      - const: mdp0-mem
+      - const: cpu-cfg
 
 patternProperties:
   "^display-controller@[0-9a-f]+$":
diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
index 001b26e65301..747a2e9665f4 100644
--- a/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
+++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml
@@ -30,10 +30,10 @@  properties:
     maxItems: 1
 
   interconnects:
-    maxItems: 2
+    maxItems: 3
 
   interconnect-names:
-    maxItems: 2
+    maxItems: 3
 
 patternProperties:
   "^display-controller@[0-9a-f]+$":
@@ -91,9 +91,12 @@  examples:
         reg = <0x0ae00000 0x1000>;
         reg-names = "mdss";
 
-        interconnects = <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>,
-                        <&mmss_noc MASTER_MDP_DISP 0 &mc_virt SLAVE_EBI1_DISP 0>;
-        interconnect-names = "mdp0-mem", "mdp1-mem";
+        interconnects = <&mmss_noc MASTER_MDP_DISP &mc_virt SLAVE_EBI1_DISP>,
+                        <&mmss_noc MASTER_MDP_DISP &mc_virt SLAVE_EBI1_DISP>,
+                        <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_DISPLAY_CFG>;
+        interconnect-names = "mdp0-mem",
+                             "mdp1-mem",
+                             "cpu-cfg";
 
         resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;