| Message ID | 20231117130421.79261-2-shengyang.chen@starfivetech.com |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | Add JH7110 MIPI DPHY TX support | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/patch-applied | success | |
| robh/dtbs-check | warning | build log |
| robh/dt-meta-schema | success |
On Fri, Nov 17, 2023 at 09:04:20PM +0800, Shengyang Chen wrote: > StarFive SoCs like the jh7110 use a MIPI D-PHY TX > controller based on a M31 IP. Add a binding for it. > > Signed-off-by: Shengyang Chen <shengyang.chen@starfivetech.com> > --- > .../bindings/phy/starfive,jh7110-dphy-tx.yaml | 74 +++++++++++++++++++ > 1 file changed, 74 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-tx.yaml > > diff --git a/Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-tx.yaml b/Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-tx.yaml > new file mode 100644 > index 000000000000..850fe2e61d1d > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-tx.yaml > @@ -0,0 +1,74 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/phy/starfive,jh7110-dphy-tx.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Starfive SoC MIPI D-PHY Tx Controller > + > +maintainers: > + - Keith Zhao <keith.zhao@starfivetech.com> > + - Shengyang Chen <shengyang.chen@starfivetech.com> > + > +description: > + The Starfive SoC uses the MIPI DSI D-PHY based on M31 IP to transfer > + DSI data. > + > +properties: > + compatible: > + const: starfive,jh7110-dphy-tx > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + clock-names: > + items: > + - const: dphy_txesc Module name is redundant. Drop 'dphy_'. > + > + resets: > + items: > + - description: DSITX_TXBYTEHS reset > + - description: MIPITX_DPHY_SYS reset > + - description: MIPITX_DPHY_TXBYTEHS reset > + > + reset-names: > + items: > + - const: dsi_txbytehs > + - const: dphy_sys > + - const: dphy_txbytehs Drop 'dphy_'. Is 'dsi_txbytehs' really a part of the DPHY block? Sounds like it is part of the DSI block. If so, the reset belongs there. If the phy driver needs it, then it needs to go find the DSI block and get its reset. > + > + power-domains: > + maxItems: 1 > + > + "#phy-cells": > + const: 0 > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - resets > + - reset-names > + - power-domains > + - "#phy-cells" > + > +additionalProperties: false > + > +examples: > + - | > + phy@295e0000 { > + compatible = "starfive,jh7110-dphy-tx"; > + reg = <0x295e0000 0x10000>; > + clocks = <&voutcrg 14>; > + clock-names = "dphy_txesc"; > + resets = <&syscrg 7>, > + <&syscrg 10>, > + <&syscrg 11>; > + reset-names = "dsi_txbytehs", "dphy_sys", "dphy_txbytehs"; > + power-domains = <&aon_syscon 0>; > + #phy-cells = <0>; > + }; > -- > 2.17.1 >
Dear Rob, Thank you for your review and comment On 2023/11/20 0:09, Rob Herring wrote: > On Fri, Nov 17, 2023 at 09:04:20PM +0800, Shengyang Chen wrote: >> StarFive SoCs like the jh7110 use a MIPI D-PHY TX >> controller based on a M31 IP. Add a binding for it. >> >> Signed-off-by: Shengyang Chen <shengyang.chen@starfivetech.com> >> --- >> .../bindings/phy/starfive,jh7110-dphy-tx.yaml | 74 +++++++++++++++++++ >> 1 file changed, 74 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-tx.yaml >> >> diff --git a/Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-tx.yaml b/Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-tx.yaml >> new file mode 100644 >> index 000000000000..850fe2e61d1d >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-tx.yaml >> @@ -0,0 +1,74 @@ >> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/phy/starfive,jh7110-dphy-tx.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Starfive SoC MIPI D-PHY Tx Controller >> + >> +maintainers: >> + - Keith Zhao <keith.zhao@starfivetech.com> >> + - Shengyang Chen <shengyang.chen@starfivetech.com> >> + >> +description: >> + The Starfive SoC uses the MIPI DSI D-PHY based on M31 IP to transfer >> + DSI data. >> + >> +properties: >> + compatible: >> + const: starfive,jh7110-dphy-tx >> + >> + reg: >> + maxItems: 1 >> + >> + clocks: >> + maxItems: 1 >> + >> + clock-names: >> + items: >> + - const: dphy_txesc > > Module name is redundant. Drop 'dphy_'. > OK, will drop "dphy_". >> + >> + resets: >> + items: >> + - description: DSITX_TXBYTEHS reset >> + - description: MIPITX_DPHY_SYS reset >> + - description: MIPITX_DPHY_TXBYTEHS reset >> + >> + reset-names: >> + items: >> + - const: dsi_txbytehs >> + - const: dphy_sys >> + - const: dphy_txbytehs > > Drop 'dphy_'. > OK, will drop "dphy_". > Is 'dsi_txbytehs' really a part of the DPHY block? Sounds like it is > part of the DSI block. If so, the reset belongs there. If the phy driver > needs it, then it needs to go find the DSI block and get its reset. > "dsi_txbytehs" is a reset of DSI block, it will be put back to DSI block and remove from DPHY block. >> + >> + power-domains: >> + maxItems: 1 >> + >> + "#phy-cells": >> + const: 0 >> + >> +required: >> + - compatible >> + - reg >> + - clocks >> + - clock-names >> + - resets >> + - reset-names >> + - power-domains >> + - "#phy-cells" >> + >> +additionalProperties: false >> + >> +examples: >> + - | >> + phy@295e0000 { >> + compatible = "starfive,jh7110-dphy-tx"; >> + reg = <0x295e0000 0x10000>; >> + clocks = <&voutcrg 14>; >> + clock-names = "dphy_txesc"; >> + resets = <&syscrg 7>, >> + <&syscrg 10>, >> + <&syscrg 11>; >> + reset-names = "dsi_txbytehs", "dphy_sys", "dphy_txbytehs"; >> + power-domains = <&aon_syscon 0>; >> + #phy-cells = <0>; >> + }; >> -- >> 2.17.1 >> thanks a lot. Best Regards, Shengyang
diff --git a/Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-tx.yaml b/Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-tx.yaml new file mode 100644 index 000000000000..850fe2e61d1d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-tx.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/starfive,jh7110-dphy-tx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Starfive SoC MIPI D-PHY Tx Controller + +maintainers: + - Keith Zhao <keith.zhao@starfivetech.com> + - Shengyang Chen <shengyang.chen@starfivetech.com> + +description: + The Starfive SoC uses the MIPI DSI D-PHY based on M31 IP to transfer + DSI data. + +properties: + compatible: + const: starfive,jh7110-dphy-tx + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: dphy_txesc + + resets: + items: + - description: DSITX_TXBYTEHS reset + - description: MIPITX_DPHY_SYS reset + - description: MIPITX_DPHY_TXBYTEHS reset + + reset-names: + items: + - const: dsi_txbytehs + - const: dphy_sys + - const: dphy_txbytehs + + power-domains: + maxItems: 1 + + "#phy-cells": + const: 0 + +required: + - compatible + - reg + - clocks + - clock-names + - resets + - reset-names + - power-domains + - "#phy-cells" + +additionalProperties: false + +examples: + - | + phy@295e0000 { + compatible = "starfive,jh7110-dphy-tx"; + reg = <0x295e0000 0x10000>; + clocks = <&voutcrg 14>; + clock-names = "dphy_txesc"; + resets = <&syscrg 7>, + <&syscrg 10>, + <&syscrg 11>; + reset-names = "dsi_txbytehs", "dphy_sys", "dphy_txbytehs"; + power-domains = <&aon_syscon 0>; + #phy-cells = <0>; + };
StarFive SoCs like the jh7110 use a MIPI D-PHY TX controller based on a M31 IP. Add a binding for it. Signed-off-by: Shengyang Chen <shengyang.chen@starfivetech.com> --- .../bindings/phy/starfive,jh7110-dphy-tx.yaml | 74 +++++++++++++++++++ 1 file changed, 74 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-tx.yaml