| Message ID | 20231115141507.37572-2-jacopo.mondi@ideasonboard.com |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | [v4,1/2] media: dt-bindings: Add OmniVision OV64A40 | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/patch-applied | success | |
| robh/dtbs-check | warning | build log |
| robh/dt-meta-schema | success |
On Wed, Nov 15, 2023 at 03:15:06PM +0100, Jacopo Mondi wrote: > Add bindings for OmniVision OV64A40. > > Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Cheers, Conor. > --- > .../bindings/media/i2c/ovti,ov64a40.yaml | 98 +++++++++++++++++++ > 1 file changed, 98 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml > > diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml > new file mode 100644 > index 000000000000..15fbe86bba10 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml > @@ -0,0 +1,98 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/i2c/ovti,ov64a40.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: OmniVision OV64A40 Image Sensor > + > +maintainers: > + - Jacopo Mondi <jacopo.mondi@ideasonboard.com> > + > +allOf: > + - $ref: /schemas/media/video-interface-devices.yaml# > + > +properties: > + compatible: > + const: ovti,ov64a40 > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + avdd-supply: > + description: Analog voltage supply, 2.8 volts > + > + dvdd-supply: > + description: Digital core voltage supply, 1.1 volts > + > + dovdd-supply: > + description: Digital I/O voltage supply, 1.8 volts > + > + powerdown-gpios: > + maxItems: 1 > + > + reset-gpios: > + maxItems: 1 > + > + port: > + $ref: /schemas/graph.yaml#/$defs/port-base > + additionalProperties: false > + > + properties: > + endpoint: > + $ref: /schemas/media/video-interfaces.yaml# > + additionalProperties: false > + > + properties: > + bus-type: > + enum: > + - 1 # MIPI CSI-2 C-PHY > + - 4 # MIPI CSI-2 D-PHY > + data-lanes: true > + link-frequencies: true > + clock-noncontinuous: true > + remote-endpoint: true > + > +required: > + - compatible > + - reg > + - clocks > + - port > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + camera@36 { > + compatible = "ovti,ov64a40"; > + reg = <0x36>; > + clocks = <&camera_clk>; > + dovdd-supply = <&vgen4_reg>; > + avdd-supply = <&vgen3_reg>; > + dvdd-supply = <&vgen2_reg>; > + powerdown-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; > + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; > + rotation = <180>; > + orientation = <2>; > + > + port { > + endpoint { > + remote-endpoint = <&mipi_csi2_in>; > + bus-type = <4>; > + data-lanes = <1 2 3 4>; > + link-frequencies = /bits/ 64 <456000000>; > + }; > + }; > + }; > + }; > + > +... > -- > 2.41.0 >
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml new file mode 100644 index 000000000000..15fbe86bba10 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml @@ -0,0 +1,98 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov64a40.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: OmniVision OV64A40 Image Sensor + +maintainers: + - Jacopo Mondi <jacopo.mondi@ideasonboard.com> + +allOf: + - $ref: /schemas/media/video-interface-devices.yaml# + +properties: + compatible: + const: ovti,ov64a40 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + avdd-supply: + description: Analog voltage supply, 2.8 volts + + dvdd-supply: + description: Digital core voltage supply, 1.1 volts + + dovdd-supply: + description: Digital I/O voltage supply, 1.8 volts + + powerdown-gpios: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + additionalProperties: false + + properties: + bus-type: + enum: + - 1 # MIPI CSI-2 C-PHY + - 4 # MIPI CSI-2 D-PHY + data-lanes: true + link-frequencies: true + clock-noncontinuous: true + remote-endpoint: true + +required: + - compatible + - reg + - clocks + - port + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + camera@36 { + compatible = "ovti,ov64a40"; + reg = <0x36>; + clocks = <&camera_clk>; + dovdd-supply = <&vgen4_reg>; + avdd-supply = <&vgen3_reg>; + dvdd-supply = <&vgen2_reg>; + powerdown-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + rotation = <180>; + orientation = <2>; + + port { + endpoint { + remote-endpoint = <&mipi_csi2_in>; + bus-type = <4>; + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <456000000>; + }; + }; + }; + }; + +...
Add bindings for OmniVision OV64A40. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> --- .../bindings/media/i2c/ovti,ov64a40.yaml | 98 +++++++++++++++++++ 1 file changed, 98 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov64a40.yaml -- 2.41.0