diff mbox series

[v3,03/11] dt-bindings: leds: aw200xx: introduce optional enable-gpios property

Message ID 20231101142445.8753-4-ddrokosov@salutedevices.com
State Not Applicable
Headers show
Series leds: aw200xx: several driver updates | expand

Checks

Context Check Description
robh/checkpatch success
robh/patch-applied success
robh/dtbs-check warning build log
robh/dt-meta-schema success

Commit Message

Dmitry Rokosov Nov. 1, 2023, 2:24 p.m. UTC 
Property 'enable-gpios' is optional, it can be used by the board
developer to connect AW200XX LED controller with appropriate 'enable'
GPIO pad.

Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
---
 Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml | 5 +++++
 1 file changed, 5 insertions(+)

Comments

Rob Herring (Arm) Nov. 6, 2023, 2:53 p.m. UTC | #1 
On Wed, 01 Nov 2023 17:24:37 +0300, Dmitry Rokosov wrote:
> Property 'enable-gpios' is optional, it can be used by the board
> developer to connect AW200XX LED controller with appropriate 'enable'
> GPIO pad.
> 
> Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
> ---
>  Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
index feb5febaf361..3da3633a242c 100644
--- a/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
+++ b/Documentation/devicetree/bindings/leds/awinic,aw200xx.yaml
@@ -41,6 +41,9 @@  properties:
     description:
       Leds matrix size
 
+  enable-gpios:
+    maxItems: 1
+
 patternProperties:
   "^led@[0-9a-f]$":
     type: object
@@ -90,6 +93,7 @@  additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/leds/common.h>
 
     i2c {
@@ -102,6 +106,7 @@  examples:
             #address-cells = <1>;
             #size-cells = <0>;
             awinic,display-rows = <3>;
+            enable-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
 
             led@0 {
                 reg = <0x0>;