| Message ID | 20230907090943.2385053-2-o.rempel@pengutronix.de |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | net: dsa: microchip: add drive strength support | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/patch-applied | success | |
| robh/dtbs-check | warning | build log |
| robh/dt-meta-schema | success |
On Thu, 07 Sep 2023 11:09:42 +0200, Oleksij Rempel wrote: > Extend device tree bindings to support drive strength configuration for the > ksz* switches. Introduced properties: > - microchip,hi-drive-strength-microamp: Controls the drive strength for > high-speed interfaces like GMII/RGMII and more. > - microchip,lo-drive-strength-microamp: Governs the drive strength for > low-speed interfaces such as LEDs, PME_N, and others. > - microchip,io-drive-strength-microamp: Controls the drive strength for > for undocumented Pads on KSZ88xx variants. > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> > --- > .../bindings/net/dsa/microchip,ksz.yaml | 20 +++++++++++++++++++ > 1 file changed, 20 insertions(+) > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml index e51be1ac03623..f2b6a66a9d22d 100644 --- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml @@ -49,6 +49,26 @@ properties: Set if the output SYNCLKO clock should be disabled. Do not mix with microchip,synclko-125. + microchip,io-drive-strength-microamp: + description: + IO Pad Drive Strength + enum: [8000, 16000] + default: 16000 + + microchip,hi-drive-strength-microamp: + description: + High Speed Drive Strength. Controls drive strength of GMII / RGMII / + MII / RMII (except TX_CLK/REFCLKI, COL and CRS) and CLKO_25_125 lines. + enum: [2000, 4000, 8000, 12000, 16000, 20000, 24000, 28000] + default: 24000 + + microchip,lo-drive-strength-microamp: + description: + Low Speed Drive Strength. Controls drive strength of TX_CLK / REFCLKI, + COL, CRS, LEDs, PME_N, NTRP_N, SDO and SDI/SDA/MDIO lines. + enum: [2000, 4000, 8000, 12000, 16000, 20000, 24000, 28000] + default: 8000 + required: - compatible - reg
Extend device tree bindings to support drive strength configuration for the ksz* switches. Introduced properties: - microchip,hi-drive-strength-microamp: Controls the drive strength for high-speed interfaces like GMII/RGMII and more. - microchip,lo-drive-strength-microamp: Governs the drive strength for low-speed interfaces such as LEDs, PME_N, and others. - microchip,io-drive-strength-microamp: Controls the drive strength for for undocumented Pads on KSZ88xx variants. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- .../bindings/net/dsa/microchip,ksz.yaml | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+)