| Message ID | 20230628085009.1130318-1-wtli@nuvoton.com |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | ASoC: dt-bindings: nau8821: Convert to dtschema | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | warning | total: 0 errors, 2 warnings, 125 lines checked |
| robh/patch-applied | success | |
| robh/dt-meta-schema | fail | build log |
On Wed, 28 Jun 2023 16:50:09 +0800, Seven Lee wrote: > Convert the NAU8821 audio CODEC bindings to DT schema. > > Signed-off-by: Seven Lee <wtli@nuvoton.com> > --- > .../devicetree/bindings/sound/nau8821.txt | 55 -------- > .../bindings/sound/nuvoton,nau8821.yaml | 125 ++++++++++++++++++ > 2 files changed, 125 insertions(+), 55 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/sound/nau8821.txt > create mode 100644 Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/clock/milbeaut-clock.example.dtb: /example-2/serial@1e700010: failed to match any schema with compatible: ['socionext,milbeaut-usio-uart'] Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.example.dtb: /example-1/syscon@20e00000: failed to match any schema with compatible: ['sprd,sc9863a-glbregs', 'syscon', 'simple-mfd'] Documentation/devicetree/bindings/leds/common.example.dtb: /example-2/i2c/led-controller@30: failed to match any schema with compatible: ['panasonic,an30259a'] Documentation/devicetree/bindings/sound/audio-graph-card2.example.dtb: /example-0/cpu: failed to match any schema with compatible: ['cpu-driver'] Documentation/devicetree/bindings/sound/audio-graph-card2.example.dtb: /example-0/codec: failed to match any schema with compatible: ['codec-driver'] Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.example.dtb: /example-0/avs-monitor@7d5d2000: failed to match any schema with compatible: ['brcm,bcm2711-avs-monitor', 'syscon', 'simple-mfd'] Documentation/devicetree/bindings/thermal/imx-thermal.example.dtb: /example-0/anatop@20c8000: failed to match any schema with compatible: ['fsl,imx6q-anatop', 'syscon', 'simple-mfd'] Documentation/devicetree/bindings/i2c/qcom,i2c-cci.example.dtb: /example-0/cci@ac4a000/i2c-bus@1/camera@60: failed to match any schema with compatible: ['ovti,ov7251'] Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.example.dtb: /example-0/pmic: failed to match any schema with compatible: ['ti,twl6035-pmic', 'ti,palmas-pmic'] Documentation/devicetree/bindings/iio/adc/ti,palmas-gpadc.example.dtb: /example-0/pmic: failed to match any schema with compatible: ['ti,twl6035-pmic', 'ti,palmas-pmic'] Documentation/devicetree/bindings/input/mediatek,pmic-keys.example.dtb: /example-0/pmic: failed to match any schema with compatible: ['mediatek,mt6397'] Documentation/devicetree/bindings/input/sprd,sc27xx-vibrator.example.dtb: /example-0/pmic@0: failed to match any schema with compatible: ['sprd,sc2731'] Documentation/devicetree/bindings/dma/dma-controller.example.dtb: /example-0/dma-controller@48000000: failed to match any schema with compatible: ['ti,omap-sdma'] Documentation/devicetree/bindings/dma/dma-router.example.dtb: /example-0/dma-router@4a002b78: failed to match any schema with compatible: ['ti,dra7-dma-crossbar'] Documentation/devicetree/bindings/memory-controllers/ingenic,nemc.example.dtb: /example-0/memory-controller@13410000/ethernet@6: failed to match any schema with compatible: ['davicom,dm9000'] Documentation/devicetree/bindings/arm/hisilicon/controller/hi3798cv200-perictrl.example.dtb: /example-0/peripheral-controller@8a20000/phy@850: failed to match any schema with compatible: ['hisilicon,hi3798cv200-combphy'] Documentation/devicetree/bindings/arm/hisilicon/controller/sysctrl.example.dtb: /example-0/system-controller@802000/clock@0: failed to match any schema with compatible: ['hisilicon,hi3620-clock'] Documentation/devicetree/bindings/arm/hisilicon/controller/cpuctrl.example.dtb: /example-0/cpuctrl@a22000/clock@0: failed to match any schema with compatible: ['hisilicon,hix5hd2-clock'] Documentation/devicetree/bindings/media/rockchip-isp1.example.dtb: /example-0/parent/i2c/camera@36: failed to match any schema with compatible: ['ovti,ov5695'] Documentation/devicetree/bindings/net/marvell,mvusb.example.dtb: /example-0/usb/mdio@1/switch@0: failed to match any schema with compatible: ['marvell,mv88e6190'] Documentation/devicetree/bindings/net/qca,ar71xx.example.dtb: /example-0/ethernet@1a000000/mdio/switch@10: failed to match any schema with compatible: ['qca,ar9331-switch'] Documentation/devicetree/bindings/reset/hisilicon,hi3660-reset.example.dtb: /example-0/iomcu@ffd7e000: failed to match any schema with compatible: ['hisilicon,hi3660-iomcu', 'syscon'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230628085009.1130318-1-wtli@nuvoton.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Wed, 28 Jun 2023 16:50:09 +0800, Seven Lee wrote: > Convert the NAU8821 audio CODEC bindings to DT schema. > > Signed-off-by: Seven Lee <wtli@nuvoton.com> > --- > .../devicetree/bindings/sound/nau8821.txt | 55 -------- > .../bindings/sound/nuvoton,nau8821.yaml | 125 ++++++++++++++++++ > 2 files changed, 125 insertions(+), 55 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/sound/nau8821.txt > create mode 100644 Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml > Reviewed-by: Rob Herring <robh@kernel.org>
On 28/06/2023 10:50, Seven Lee wrote: > Convert the NAU8821 audio CODEC bindings to DT schema. > > Signed-off-by: Seven Lee <wtli@nuvoton.com> > --- This is not v1. Please write proper changelog and version your patches. You did not respond to my comment and you did not fully implement it. With lack of changelog it looks like it was ignored Please fix everything I asked about. Best regards, Krzysztof
On Wed, 28 Jun 2023 16:50:09 +0800, Seven Lee wrote: > Convert the NAU8821 audio CODEC bindings to DT schema. > > Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next Thanks! [1/1] ASoC: dt-bindings: nau8821: Convert to dtschema commit: 754d1ce3ab6bec057bf94b0ec1a789fdfa2fef99 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
diff --git a/Documentation/devicetree/bindings/sound/nau8821.txt b/Documentation/devicetree/bindings/sound/nau8821.txt deleted file mode 100644 index 7c84e7c7327a..000000000000 --- a/Documentation/devicetree/bindings/sound/nau8821.txt +++ /dev/null @@ -1,55 +0,0 @@ -Nuvoton NAU88L21 audio codec - -This device supports I2C only. - -Required properties: - - compatible : Must be "nuvoton,nau8821" - - - reg : the I2C address of the device. This is either 0x1B (CSB=0) or 0x54 (CSB=1). - -Optional properties: - - nuvoton,jkdet-enable: Enable jack detection via JKDET pin. - - nuvoton,jkdet-pull-enable: Enable JKDET pin pull. If set - pin pull enabled, - otherwise pin in high impedance state. - - nuvoton,jkdet-pull-up: Pull-up JKDET pin. If set then JKDET pin is pull up, otherwise pull down. - - nuvoton,jkdet-polarity: JKDET pin polarity. 0 - active high, 1 - active low. - - - nuvoton,vref-impedance: VREF Impedance selection - 0 - Open - 1 - 25 kOhm - 2 - 125 kOhm - 3 - 2.5 kOhm - - - nuvoton,micbias-voltage: Micbias voltage level. - 0 - VDDA - 1 - VDDA - 2 - VDDA * 1.1 - 3 - VDDA * 1.2 - 4 - VDDA * 1.3 - 5 - VDDA * 1.4 - 6 - VDDA * 1.53 - 7 - VDDA * 1.53 - - - nuvoton,jack-insert-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms - - nuvoton,jack-eject-debounce: number from 0 to 7 that sets debounce time to 2^(n+2) ms - - - nuvoton,dmic-clk-threshold: the ADC threshold of DMIC clock. - - nuvoton,key_enable: Headset button detection switch. - -Example: - - headset: nau8821@1b { - compatible = "nuvoton,nau8821"; - reg = <0x1b>; - interrupt-parent = <&gpio>; - interrupts = <23 IRQ_TYPE_LEVEL_LOW>; - nuvoton,jkdet-enable; - nuvoton,jkdet-pull-enable; - nuvoton,jkdet-pull-up; - nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>; - nuvoton,vref-impedance = <2>; - nuvoton,micbias-voltage = <6>; - nuvoton,jack-insert-debounce = <7>; - nuvoton,jack-eject-debounce = <7>; - nuvoton,dmic-clk-threshold = 3072000; - }; diff --git a/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml new file mode 100644 index 000000000000..fc2f4ce4db88 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/nuvoton,nau8821.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NAU88L21 audio codec + +maintainers: + - Seven Lee <wtli@nuvoton.com> + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + const: nuvoton,nau8821 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + nuvoton,jkdet-enable: + description: Enable jack detection via JKDET pin. + type: boolean + + nuvoton,jkdet-pull-enable: + description: Enable JKDET pin pull. If set - pin pull enabled, + otherwise pin in high impedance state. + type: boolean + + nuvoton,jkdet-pull-up: + description: Pull-up JKDET pin. If set then JKDET pin is pull up, + otherwise pull down. + type: boolean + + nuvoton,key-enable: + description: handles key press detection. + type: boolean + + nuvoton,jkdet-polarity: + description: JKDET pin polarity. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # active high + - 1 # active low + default: 1 + + nuvoton,micbias-voltage: + description: MICBIAS output level select. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # VDDA + - 1 # VDDA * 1 + - 2 # VDDA * 1.1 + - 3 # VDDA * 1.2 + - 4 # VDDA * 1.3 + - 5 # VDDA * 1.4 + - 6 # VDDA * 1.53 + - 7 # VDDA * 1.53 + default: 6 + + nuvoton,vref-impedance: + description: VMID Tie-off impedance select. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # open + - 1 # 25KOhms + - 2 # 125KOhms + - 3 # 2.5KOhms + default: 2 + + nuvoton,jack-insert-debounce: + description: number from 0 to 7 that sets debounce time to 2^(n+2)ms. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 7 + default: 7 + + nuvoton,jack-eject-debounce: + description: number from 0 to 7 that sets debounce time to 2^(n+2)ms. + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 7 + default: 0 + + nuvoton,dmic-clk-threshold: + description: DMIC clock speed expected value. Unit is Hz. + $ref: /schemas/types.yaml#/definitions/uint32 + default: 3072000 + + '#sound-dai-cells': + const: 0 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + codec@1b { + compatible = "nuvoton,nau8821"; + reg = <0x1b>; + interrupt-parent = <&gpio>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + nuvoton,jkdet-enable; + nuvoton,jkdet-pull-enable; + nuvoton,jkdet-pull-up; + nuvoton,key-enable; + nuvoton,jkdet-polarity = <GPIO_ACTIVE_LOW>; + nuvoton,micbias-voltage = <6>; + nuvoton,vref-impedance = <2>; + nuvoton,jack-insert-debounce = <7>; + nuvoton,jack-eject-debounce = <0>; + nuvoton,dmic-clk-threshold = <3072000>; + #sound-dai-cells = <0>; + }; + };
Convert the NAU8821 audio CODEC bindings to DT schema. Signed-off-by: Seven Lee <wtli@nuvoton.com> --- .../devicetree/bindings/sound/nau8821.txt | 55 -------- .../bindings/sound/nuvoton,nau8821.yaml | 125 ++++++++++++++++++ 2 files changed, 125 insertions(+), 55 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/nau8821.txt create mode 100644 Documentation/devicetree/bindings/sound/nuvoton,nau8821.yaml