| Message ID | 20230619131620.3286650-1-nm@ti.com |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | [V2] arm64: dts: ti: k3-pinctrl: Introduce debounce select mux macros | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/patch-applied | fail | build log |
On 19/06/23 18:46, Nishanth Menon wrote: > Introduce the debounce select mux macros to allow folks to setup > debounce configuration for pins. Each configuration selected maps > to a specific timing register as documented in appropriate Technical > Reference Manual (example:[1]). > > [1] AM625x TRM (section 6.1.2.2): https://www.ti.com/lit/pdf/spruiv7 > > Signed-off-by: Nishanth Menon <nm@ti.com> > --- > Changes since V1: > - I have'nt picked up Krystoff's ack since the file modified is now different. > - Changes now applied to k3-pinctrl.h instead of the ABI header that is > now set up to be deleted in v6.5-rc1. > > V1: https://lore.kernel.org/linux-devicetree/20230308084309.396192-1-nm@ti.com/ > > arch/arm64/boot/dts/ti/k3-pinctrl.h | 9 +++++++++ > 1 file changed, 9 insertions(+) > Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> > diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h > index c97548a3f42d..6004e0967ec5 100644 > --- a/arch/arm64/boot/dts/ti/k3-pinctrl.h > +++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h > @@ -11,6 +11,7 @@ > #define PULLUDEN_SHIFT (16) > #define PULLTYPESEL_SHIFT (17) > #define RXACTIVE_SHIFT (18) > +#define DEBOUNCE_SHIFT (11) > > #define PULL_DISABLE (1 << PULLUDEN_SHIFT) > #define PULL_ENABLE (0 << PULLUDEN_SHIFT) > @@ -29,6 +30,14 @@ > #define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP) > #define PIN_INPUT_PULLDOWN (INPUT_EN | PULL_DOWN) > > +#define PIN_DEBOUNCE_DISABLE (0 << DEBOUNCE_SHIFT) > +#define PIN_DEBOUNCE_CONF1 (1 << DEBOUNCE_SHIFT) > +#define PIN_DEBOUNCE_CONF2 (2 << DEBOUNCE_SHIFT) > +#define PIN_DEBOUNCE_CONF3 (3 << DEBOUNCE_SHIFT) > +#define PIN_DEBOUNCE_CONF4 (4 << DEBOUNCE_SHIFT) > +#define PIN_DEBOUNCE_CONF5 (5 << DEBOUNCE_SHIFT) > +#define PIN_DEBOUNCE_CONF6 (6 << DEBOUNCE_SHIFT) > + > #define AM62AX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) > #define AM62AX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) >
Hi Nishanth Menon, On Mon, 19 Jun 2023 08:16:20 -0500, Nishanth Menon wrote: > Introduce the debounce select mux macros to allow folks to setup > debounce configuration for pins. Each configuration selected maps > to a specific timing register as documented in appropriate Technical > Reference Manual (example:[1]). > > [1] AM625x TRM (section 6.1.2.2): https://www.ti.com/lit/pdf/spruiv7 > > [...] I have applied the following to branch ti-k3-dts-next on [1]. Thank you! [1/1] arm64: dts: ti: k3-pinctrl: Introduce debounce select mux macros commit: 0bec3d7ecc7493b0e530f6f34539841ef6779006 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent up the chain during the next merge window (or sooner if it is a relevant bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. [1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h index c97548a3f42d..6004e0967ec5 100644 --- a/arch/arm64/boot/dts/ti/k3-pinctrl.h +++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h @@ -11,6 +11,7 @@ #define PULLUDEN_SHIFT (16) #define PULLTYPESEL_SHIFT (17) #define RXACTIVE_SHIFT (18) +#define DEBOUNCE_SHIFT (11) #define PULL_DISABLE (1 << PULLUDEN_SHIFT) #define PULL_ENABLE (0 << PULLUDEN_SHIFT) @@ -29,6 +30,14 @@ #define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP) #define PIN_INPUT_PULLDOWN (INPUT_EN | PULL_DOWN) +#define PIN_DEBOUNCE_DISABLE (0 << DEBOUNCE_SHIFT) +#define PIN_DEBOUNCE_CONF1 (1 << DEBOUNCE_SHIFT) +#define PIN_DEBOUNCE_CONF2 (2 << DEBOUNCE_SHIFT) +#define PIN_DEBOUNCE_CONF3 (3 << DEBOUNCE_SHIFT) +#define PIN_DEBOUNCE_CONF4 (4 << DEBOUNCE_SHIFT) +#define PIN_DEBOUNCE_CONF5 (5 << DEBOUNCE_SHIFT) +#define PIN_DEBOUNCE_CONF6 (6 << DEBOUNCE_SHIFT) + #define AM62AX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define AM62AX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
Introduce the debounce select mux macros to allow folks to setup debounce configuration for pins. Each configuration selected maps to a specific timing register as documented in appropriate Technical Reference Manual (example:[1]). [1] AM625x TRM (section 6.1.2.2): https://www.ti.com/lit/pdf/spruiv7 Signed-off-by: Nishanth Menon <nm@ti.com> --- Changes since V1: - I have'nt picked up Krystoff's ack since the file modified is now different. - Changes now applied to k3-pinctrl.h instead of the ABI header that is now set up to be deleted in v6.5-rc1. V1: https://lore.kernel.org/linux-devicetree/20230308084309.396192-1-nm@ti.com/ arch/arm64/boot/dts/ti/k3-pinctrl.h | 9 +++++++++ 1 file changed, 9 insertions(+)