deleted file mode 100644
@@ -1,57 +0,0 @@
-Freescale imx21 Framebuffer
-
-This framebuffer driver supports devices imx1, imx21, imx25, and imx27.
-
-Required properties:
-- compatible : "fsl,<chip>-fb", chip should be imx1 or imx21
-- reg : Should contain 1 register ranges(address and length)
-- interrupts : One interrupt of the fb dev
-
-Required nodes:
-- display: Phandle to a display node as described in
- Documentation/devicetree/bindings/display/panel/display-timing.txt
- Additional, the display node has to define properties:
- - bits-per-pixel: Bits per pixel
- - fsl,pcr: LCDC PCR value
- A display node may optionally define
- - fsl,aus-mode: boolean to enable AUS mode (only for imx21)
-
-Optional properties:
-- lcd-supply: Regulator for LCD supply voltage.
-- fsl,dmacr: DMA Control Register value. This is optional. By default, the
- register is not modified as recommended by the datasheet.
-- fsl,lpccr: Contrast Control Register value. This property provides the
- default value for the contrast control register.
- If that property is omitted, the register is zeroed.
-- fsl,lscr1: LCDC Sharp Configuration Register value.
-
-Example:
-
- imxfb: fb@10021000 {
- compatible = "fsl,imx21-fb";
- interrupts = <61>;
- reg = <0x10021000 0x1000>;
- display = <&display0>;
- };
-
- ...
-
- display0: display0 {
- model = "Primeview-PD050VL1";
- bits-per-pixel = <16>;
- fsl,pcr = <0xf0c88080>; /* non-standard but required */
- display-timings {
- native-mode = <&timing_disp0>;
- timing_disp0: 640x480 {
- hactive = <640>;
- vactive = <480>;
- hback-porch = <112>;
- hfront-porch = <36>;
- hsync-len = <32>;
- vback-porch = <33>;
- vfront-porch = <33>;
- vsync-len = <2>;
- clock-frequency = <25000000>;
- };
- };
- };
new file mode 100644
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx-lcdc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX LCD Controller, found on i.MX1, i.MX21, i.MX25 and i.MX27
+
+maintainers:
+ - Sascha Hauer <s.hauer@pengutronix.de>
+ - Pengutronix Kernel Team <kernel@pengutronix.de>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,imx1-fb
+ - fsl,imx21-fb
+ - items:
+ - enum:
+ - fsl,imx25-fb
+ - fsl,imx27-fb
+ - const: fsl,imx21-fb
+
+ clocks:
+ maxItems: 3
+
+ clock-names:
+ items:
+ - const: ipg
+ - const: ahb
+ - const: per
+
+ display:
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ lcd-supply:
+ description:
+ Regulator for LCD supply voltage.
+
+ fsl,dmacr:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Override value for DMA Control Register
+
+ fsl,lpccr:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Contrast Control Register value.
+
+ fsl,lscr1:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ LCDC Sharp Configuration Register value.
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - display
+ - interrupts
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ imxfb: fb@10021000 {
+ compatible = "fsl,imx21-fb";
+ interrupts = <61>;
+ reg = <0x10021000 0x1000>;
+ display = <&display0>;
+ clocks = <&clks 103>, <&clks 49>, <&clks 66>;
+ clock-names = "ipg", "ahb", "per";
+ };
+
+ display0: display0 {
+ model = "Primeview-PD050VL1";
+ bits-per-pixel = <16>;
+ fsl,pcr = <0xf0c88080>; /* non-standard but required */
+
+ display-timings {
+ native-mode = <&timing_disp0>;
+ timing_disp0: timing0 {
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <112>;
+ hfront-porch = <36>;
+ hsync-len = <32>;
+ vback-porch = <33>;
+ vfront-porch = <33>;
+ vsync-len = <2>;
+ clock-frequency = <25000000>;
+ };
+ };
+ };
Compared to the txt description this adds clocks and clock-names to match reality. Note that fsl,imx-lcdc was picked as the new name as this is the actual hardware's name. There will be a new binding implementing the saner drm concept that is supposed to supersede this legacy fb binding Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> --- Changes since v1, sent with Message-Id: - mention clock stuff being added (Philipp) - dropped some quotes (Rob) - fix specification of compatible (I kept claiming though that imx21 isn't compatible to imx1. While that might be true, I don't have an i.MX1 to check the details and currently the imx*.dtsi don't claim that compatibility.) I tried to implement the suggestion by Rob to formalize the display binding. But I learned that this doesn't change how the display property is formalized in the fsl,imx-lcdc.yaml (which is just a phandle without means to specify that it should point to a node which fulfills a certain binding.) Best regards Uwe .../bindings/display/imx/fsl,imx-fb.txt | 57 ---------- .../bindings/display/imx/fsl,imx-lcdc.yaml | 102 ++++++++++++++++++ 2 files changed, 102 insertions(+), 57 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt create mode 100644 Documentation/devicetree/bindings/display/imx/fsl,imx-lcdc.yaml