diff mbox series

[v4] dt-bindings: input: Convert ti,drv260x to DT schema

Message ID 20221118174831.69793-1-luca@z3ntu.xyz
State Not Applicable, archived
Headers show
Series [v4] dt-bindings: input: Convert ti,drv260x to DT schema | expand

Checks

Context Check Description
robh/checkpatch warning total: 0 errors, 2 warnings, 109 lines checked
robh/patch-applied success
robh/dtbs-check warning build log
robh/dt-meta-schema success

Commit Message

Luca Weiss Nov. 18, 2022, 5:48 p.m. UTC 
Convert the drv260x haptics binding to DT schema format.

The only notable change from .txt format is that vbat-supply is not
actually required, so don't make it a required property.

Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
Changes in v4:
* use non-deprecated enable-gpios for 'required' and example

 .../devicetree/bindings/input/ti,drv260x.txt  |  50 --------
 .../devicetree/bindings/input/ti,drv260x.yaml | 109 ++++++++++++++++++
 2 files changed, 109 insertions(+), 50 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/input/ti,drv260x.txt
 create mode 100644 Documentation/devicetree/bindings/input/ti,drv260x.yaml

Comments

Rob Herring (Arm) Nov. 30, 2022, 5:09 p.m. UTC | #1 
On Fri, 18 Nov 2022 18:48:29 +0100, Luca Weiss wrote:
> Convert the drv260x haptics binding to DT schema format.
> 
> The only notable change from .txt format is that vbat-supply is not
> actually required, so don't make it a required property.
> 
> Acked-by: Andrew Davis <afd@ti.com>
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
> ---
> Changes in v4:
> * use non-deprecated enable-gpios for 'required' and example
> 
>  .../devicetree/bindings/input/ti,drv260x.txt  |  50 --------
>  .../devicetree/bindings/input/ti,drv260x.yaml | 109 ++++++++++++++++++
>  2 files changed, 109 insertions(+), 50 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/input/ti,drv260x.txt
>  create mode 100644 Documentation/devicetree/bindings/input/ti,drv260x.yaml
> 

Reviewed-by: Rob Herring <robh@kernel.org>
Dmitry Torokhov Dec. 2, 2022, 11:31 p.m. UTC | #2 
On Fri, Nov 18, 2022 at 06:48:29PM +0100, Luca Weiss wrote:
> Convert the drv260x haptics binding to DT schema format.
> 
> The only notable change from .txt format is that vbat-supply is not
> actually required, so don't make it a required property.
> 
> Acked-by: Andrew Davis <afd@ti.com>
> Signed-off-by: Luca Weiss <luca@z3ntu.xyz>

Applied, thank you.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt
deleted file mode 100644
index 4c5312eaaa85..000000000000
--- a/Documentation/devicetree/bindings/input/ti,drv260x.txt
+++ /dev/null
@@ -1,50 +0,0 @@ 
-* Texas Instruments - drv260x Haptics driver family
-
-Required properties:
-	- compatible - One of:
-		"ti,drv2604" - DRV2604
-		"ti,drv2605" - DRV2605
-		"ti,drv2605l" - DRV2605L
-	- reg -  I2C slave address
-	- vbat-supply - Required supply regulator
-	- mode - Power up mode of the chip (defined in include/dt-bindings/input/ti-drv260x.h)
-		DRV260X_LRA_MODE - Linear Resonance Actuator mode (Piezoelectric)
-		DRV260X_LRA_NO_CAL_MODE - This is a LRA Mode but there is no calibration
-				sequence during init.  And the device is configured for real
-				time playback mode (RTP mode).
-		DRV260X_ERM_MODE - Eccentric Rotating Mass mode (Rotary vibrator)
-	- library-sel - These are ROM based waveforms pre-programmed into the IC.
-				This should be set to set the library to use at power up.
-				(defined in include/dt-bindings/input/ti-drv260x.h)
-		DRV260X_LIB_EMPTY - Do not use a pre-programmed library
-		DRV260X_ERM_LIB_A - Pre-programmed Library
-		DRV260X_ERM_LIB_B - Pre-programmed Library
-		DRV260X_ERM_LIB_C - Pre-programmed Library
-		DRV260X_ERM_LIB_D - Pre-programmed Library
-		DRV260X_ERM_LIB_E - Pre-programmed Library
-		DRV260X_ERM_LIB_F - Pre-programmed Library
-		DRV260X_LIB_LRA - Pre-programmed LRA Library
-
-Optional properties:
-	- enable-gpio - gpio pin to enable/disable the device.
-	- vib-rated-mv - The rated voltage of the actuator in millivolts.
-			  If this is not set then the value will be defaulted to
-			  3.2 v.
-	- vib-overdrive-mv - The overdrive voltage of the actuator in millivolts.
-			  If this is not set then the value will be defaulted to
-			  3.2 v.
-Example:
-
-haptics: haptics@5a {
-	compatible = "ti,drv2605l";
-	reg = <0x5a>;
-	vbat-supply = <&vbat>;
-	enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
-	mode = <DRV260X_LRA_MODE>;
-	library-sel = <DRV260X_LIB_LRA>;
-	vib-rated-mv = <3200>;
-	vib-overdrive-mv = <3200>;
-}
-
-For more product information please see the link below:
-http://www.ti.com/product/drv2605
diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.yaml b/Documentation/devicetree/bindings/input/ti,drv260x.yaml
new file mode 100644
index 000000000000..c6245c5b9e2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/ti,drv260x.yaml
@@ -0,0 +1,109 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/ti,drv260x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments - drv260x Haptics driver family
+
+maintainers:
+  - Andrew Davis <afd@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,drv2604
+      - ti,drv2605
+      - ti,drv2605l
+
+  reg:
+    maxItems: 1
+
+  vbat-supply:
+    description: Power supply to the haptic motor
+
+  # TODO: Deprecate 'mode' in favor of differently named property
+  mode:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Power up mode of the chip
+      (defined in include/dt-bindings/input/ti-drv260x.h)
+
+      DRV260X_LRA_MODE
+        Linear Resonance Actuator mode (Piezoelectric)
+
+      DRV260X_LRA_NO_CAL_MODE
+        This is a LRA Mode but there is no calibration sequence during init.
+        And the device is configured for real time playback mode (RTP mode).
+
+      DRV260X_ERM_MODE
+        Eccentric Rotating Mass mode (Rotary vibrator)
+    enum: [ 0, 1, 2 ]
+
+  library-sel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      These are ROM based waveforms pre-programmed into the IC.
+      This should be set to set the library to use at power up.
+      (defined in include/dt-bindings/input/ti-drv260x.h)
+
+      DRV260X_LIB_EMPTY - Do not use a pre-programmed library
+      DRV260X_ERM_LIB_A - Pre-programmed Library
+      DRV260X_ERM_LIB_B - Pre-programmed Library
+      DRV260X_ERM_LIB_C - Pre-programmed Library
+      DRV260X_ERM_LIB_D - Pre-programmed Library
+      DRV260X_ERM_LIB_E - Pre-programmed Library
+      DRV260X_ERM_LIB_F - Pre-programmed Library
+      DRV260X_LIB_LRA - Pre-programmed LRA Library
+    enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
+
+  enable-gpio:
+    maxItems: 1
+    deprecated: true
+
+  enable-gpios:
+    maxItems: 1
+
+  vib-rated-mv:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The rated voltage of the actuator in millivolts.
+      If this is not set then the value will be defaulted to 3200 mV.
+    default: 3200
+
+  vib-overdrive-mv:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      The overdrive voltage of the actuator in millivolts.
+      If this is not set then the value will be defaulted to 3200 mV.
+    default: 3200
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - mode
+  - library-sel
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/input/ti-drv260x.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        haptics@5a {
+            compatible = "ti,drv2605l";
+            reg = <0x5a>;
+            vbat-supply = <&vbat>;
+            enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+            mode = <DRV260X_LRA_MODE>;
+            library-sel = <DRV260X_LIB_LRA>;
+            vib-rated-mv = <3200>;
+            vib-overdrive-mv = <3200>;
+        };
+    };