diff mbox series

[V2,1/3] dt-bindings: gpio: Convert Unisoc GPIO controller binding to yaml

Message ID 20220930082405.1761-2-zhang.lyra@gmail.com
State Not Applicable, archived
Headers show
Series Convert Unisoc GPIO bindings to yaml and add support for UMS512 | expand

Checks

Context Check Description
robh/checkpatch warning total: 0 errors, 2 warnings, 70 lines checked
robh/patch-applied success
robh/dtbs-check warning build log
robh/dt-meta-schema success

Commit Message

Chunyan Zhang Sept. 30, 2022, 8:24 a.m. UTC 
From: Chunyan Zhang <chunyan.zhang@unisoc.com>

Convert the Unisoc gpio controller binding to DT schema format.

Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
---
 .../devicetree/bindings/gpio/gpio-sprd.txt    | 28 --------
 .../devicetree/bindings/gpio/sprd,gpio.yaml   | 70 +++++++++++++++++++
 2 files changed, 70 insertions(+), 28 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-sprd.txt
 create mode 100644 Documentation/devicetree/bindings/gpio/sprd,gpio.yaml

Comments

Krzysztof Kozlowski Sept. 30, 2022, 11:07 a.m. UTC | #1 
On 30/09/2022 10:24, Chunyan Zhang wrote:
> From: Chunyan Zhang <chunyan.zhang@unisoc.com>
> 
> Convert the Unisoc gpio controller binding to DT schema format.
> 
> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>



Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/gpio/gpio-sprd.txt b/Documentation/devicetree/bindings/gpio/gpio-sprd.txt
deleted file mode 100644
index eca97d45388f..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-sprd.txt
+++ /dev/null
@@ -1,28 +0,0 @@ 
-Spreadtrum GPIO controller bindings
-
-The controller's registers are organized as sets of sixteen 16-bit
-registers with each set controlling a bank of up to 16 pins. A single
-interrupt is shared for all of the banks handled by the controller.
-
-Required properties:
-- compatible: Should be "sprd,sc9860-gpio".
-- reg: Define the base and range of the I/O address space containing
-the GPIO controller registers.
-- gpio-controller: Marks the device node as a GPIO controller.
-- #gpio-cells: Should be <2>. The first cell is the gpio number and
-the second cell is used to specify optional parameters.
-- interrupt-controller: Marks the device node as an interrupt controller.
-- #interrupt-cells: Should be <2>. Specifies the number of cells needed
-to encode interrupt source.
-- interrupts: Should be the port interrupt shared by all the gpios.
-
-Example:
-	ap_gpio: gpio@40280000 {
-		compatible = "sprd,sc9860-gpio";
-		reg = <0 0x40280000 0 0x1000>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/sprd,gpio.yaml b/Documentation/devicetree/bindings/gpio/sprd,gpio.yaml
new file mode 100644
index 000000000000..c0cd1ed9809b
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/sprd,gpio.yaml
@@ -0,0 +1,70 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2022 Unisoc Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/sprd,gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Unisoc GPIO controller
+
+maintainers:
+  - Orson Zhai <orsonzhai@gmail.com>
+  - Baolin Wang <baolin.wang7@gmail.com>
+  - Chunyan Zhang <zhang.lyra@gmail.com>
+
+description:
+  The controller's registers are organized as sets of sixteen 16-bit
+  registers with each set controlling a bank of up to 16 pins. A single
+  interrupt is shared for all of the banks handled by the controller.
+
+properties:
+  compatible:
+    const: sprd,sc9860-gpio
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+    description: The interrupt shared by all GPIO lines for this controller.
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+  - interrupt-controller
+  - "#interrupt-cells"
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        ap_gpio: gpio@40280000 {
+            compatible = "sprd,sc9860-gpio";
+            reg = <0 0x40280000 0 0x1000>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+...