| Message ID | 20220727164050.385241-1-krzysztof.kozlowski@linaro.org |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | ASoC: dt-bindings: use spi-peripheral-props.yaml | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success | |
| robh/patch-applied | success | |
| robh/dtbs-check | warning | build log |
| robh/dt-meta-schema | success |
On Wed, Jul 27, 2022 at 06:40:50PM +0200, Krzysztof Kozlowski wrote: > Instead of listing directly properties typical for SPI peripherals, > reference the spi-peripheral-props.yaml schema. This allows using all > properties typical for SPI-connected devices, even these which device > bindings author did not tried yet. > > Remove the spi-* properties which now come via spi-peripheral-props.yaml > schema, except for the cases when device schema adds some constraints > like maximum frequency. > > While changing additionalProperties->unevaluatedProperties, put it in > typical place, just before example DTS. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- For the Wolfson bits: Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Thanks, Charles
On Wed, 27 Jul 2022 18:40:50 +0200, Krzysztof Kozlowski wrote: > Instead of listing directly properties typical for SPI peripherals, > reference the spi-peripheral-props.yaml schema. This allows using all > properties typical for SPI-connected devices, even these which device > bindings author did not tried yet. > > Remove the spi-* properties which now come via spi-peripheral-props.yaml > schema, except for the cases when device schema adds some constraints > like maximum frequency. > > [...] Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next Thanks! [1/1] ASoC: dt-bindings: use spi-peripheral-props.yaml commit: abed2baf6814597f244cd879285b2210b0870548 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1977.yaml b/Documentation/devicetree/bindings/sound/adi,adau1977.yaml index b80454ad97da..847b83398d3d 100644 --- a/Documentation/devicetree/bindings/sound/adi,adau1977.yaml +++ b/Documentation/devicetree/bindings/sound/adi,adau1977.yaml @@ -32,8 +32,6 @@ properties: reset-gpios: maxItems: 1 - spi-max-frequency: true - AVDD-supply: description: Analog power support for the device. @@ -52,7 +50,10 @@ required: - compatible - AVDD-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8731.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8731.yaml index e7220e8b49f0..15795f63b5a3 100644 --- a/Documentation/devicetree/bindings/sound/wlf,wm8731.yaml +++ b/Documentation/devicetree/bindings/sound/wlf,wm8731.yaml @@ -52,10 +52,6 @@ properties: DCVDD-supply: description: Digital core supply regulator for the DCVDD pin. - spi-max-frequency: true - -additionalProperties: false - required: - reg - compatible @@ -64,6 +60,11 @@ required: - DBVDD-supply - DCVDD-supply +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi {
Instead of listing directly properties typical for SPI peripherals, reference the spi-peripheral-props.yaml schema. This allows using all properties typical for SPI-connected devices, even these which device bindings author did not tried yet. Remove the spi-* properties which now come via spi-peripheral-props.yaml schema, except for the cases when device schema adds some constraints like maximum frequency. While changing additionalProperties->unevaluatedProperties, put it in typical place, just before example DTS. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Technically, this depends on [1] merged to SPI tree, if we want to preserve existing behavior of not allowing SPI CPHA and CPOL in each of schemas in this patch. If this patch comes independently via different tree, the SPI CPHA and CPOL will be allowed for brief period of time, before [1] is merged. This will not have negative impact, just DT schema checks will be loosened for that period. [1] https://lore.kernel.org/all/20220722191539.90641-2-krzysztof.kozlowski@linaro.org/ --- .../devicetree/bindings/sound/adi,adau1977.yaml | 7 ++++--- Documentation/devicetree/bindings/sound/wlf,wm8731.yaml | 9 +++++---- 2 files changed, 9 insertions(+), 7 deletions(-)