| Message ID | 20220205162144.30240-6-vidyas@nvidia.com |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | PCI: tegra: Add Tegra234 PCIe support | expand |
On Sat, Feb 05, 2022 at 09:51:39PM +0530, Vidya Sagar wrote: > Add support for Tegra234 PCIe controllers. These controllers are based > on Synopsys DesignWare core IP. > > Signed-off-by: Vidya Sagar <vidyas@nvidia.com> > --- > .../bindings/pci/nvidia,tegra194-pcie.txt | 106 +++++++++++++++++- > 1 file changed, 103 insertions(+), 3 deletions(-) This falls above my threshold of convert this to schema first. > > diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt > index 8e4f9bfb316d..ae9555a50fb0 100644 > --- a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt > +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt > @@ -10,6 +10,8 @@ Required properties: > - power-domains: A phandle to the node that controls power to the respective > PCIe controller and a specifier name for the PCIe controller. Following are > the specifiers for the different PCIe controllers > + Tegra194: > + --------- > TEGRA194_POWER_DOMAIN_PCIEX8B: C0 > TEGRA194_POWER_DOMAIN_PCIEX1A: C1 > TEGRA194_POWER_DOMAIN_PCIEX1A: C2 > @@ -18,6 +20,21 @@ Required properties: > TEGRA194_POWER_DOMAIN_PCIEX8A: C5 > these specifiers are defined in > "include/dt-bindings/power/tegra194-powergate.h" file. > + Tegra234: > + --------- > + TEGRA234_POWER_DOMAIN_PCIEX4BA: C0 > + TEGRA234_POWER_DOMAIN_PCIEX1A : C1 > + TEGRA234_POWER_DOMAIN_PCIEX1A : C2 > + TEGRA234_POWER_DOMAIN_PCIEX1A : C3 > + TEGRA234_POWER_DOMAIN_PCIEX4BB: C4 > + TEGRA234_POWER_DOMAIN_PCIEX8A : C5 > + TEGRA234_POWER_DOMAIN_PCIEX4A : C6 > + TEGRA234_POWER_DOMAIN_PCIEX8B : C7 > + TEGRA234_POWER_DOMAIN_PCIEX4CA: C8 > + TEGRA234_POWER_DOMAIN_PCIEX4CB: C9 > + TEGRA234_POWER_DOMAIN_PCIEX4CC: C10 > + these specifiers are defined in > + "include/dt-bindings/power/tegra234-powergate.h" file. > - reg: A list of physical base address and length pairs for each set of > controller registers. Must contain an entry for each entry in the reg-names > property. > @@ -47,16 +64,33 @@ Required properties: > "p2u-N": where N ranges from 0 to one less than the total number of lanes > - nvidia,bpmp: Must contain a pair of phandle to BPMP controller node followed > by controller-id. Following are the controller ids for each controller. > + Tegra194: > + --------- > 0: C0 > 1: C1 > 2: C2 > 3: C3 > 4: C4 > 5: C5 > + Tegra194: > + --------- > + 0 : C0 > + 1 : C1 > + 2 : C2 > + 3 : C3 > + 4 : C4 > + 5 : C5 > + 6 : C6 > + 7 : C7 > + 8 : C8 > + 9 : C9 > + 10: C10 > - vddio-pex-ctl-supply: Regulator supply for PCIe side band signals > > RC mode: > -- compatible: Tegra19x must contain "nvidia,tegra194-pcie" > +- compatible: Must be > + - "nvidia,tegra194-pcie" for Tegra194 > + - "nvidia,tegra234-pcie" for Tegra234 > - device_type: Must be "pci" for RC mode > - interrupt-names: Must include the following entries: > "msi": The Tegra interrupt that is asserted when an MSI is received > @@ -99,7 +133,8 @@ In Tegra194, Only controllers C0, C4 & C5 support EP mode. > > Optional properties: > - pinctrl-names: A list of pinctrl state names. > - It is mandatory for C5 controller and optional for other controllers. > + It is mandatory for C5 controller in Tegra194 and optional for other > + controllers. > - "default": Configures PCIe I/O for proper operation. > - pinctrl-0: phandle for the 'default' state of pin configuration. > It is mandatory for C5 controller and optional for other controllers. > @@ -108,7 +143,7 @@ Optional properties: > improve performance when a platform is designed in such a way that it > satisfies at least one of the following conditions thereby enabling root > port to exchange optimum number of FC (Flow Control) credits with > - downstream devices > + downstream devices. This is applicable for only Tegra194. > 1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS) > 2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and > a) speed is Gen-2 and MPS is 256B > @@ -119,6 +154,9 @@ Optional properties: > specified in microseconds > - nvidia,aspm-l0s-entrance-latency-us: ASPM L0s entrance latency to be > specified in microseconds > +- nvidia,enable-srns: This boolean property needs to be present if the > + controller is configured to operate in SRNS (Separate Reference Clocks with > + No Spread-Spectrum Clocking). This is applicable only for Tegra234. > > RC mode: > - vpcie3v3-supply: A phandle to the regulator node that supplies 3.3V to the slot > @@ -127,6 +165,9 @@ RC mode: > - vpcie12v-supply: A phandle to the regulator node that supplies 12V to the slot > if the platform has one such slot. (Ex:- x16 slot owned by C5 controller > in p2972-0000 platform). > +- nvidia,enable-ext-refclk: This boolean property needs to be present if the > + controller is configured to use the reference clocking coming in from an > + external clock source instead of using the internal clock source. > > EP mode: > - nvidia,refclk-select-gpios: Must contain a phandle to a GPIO controller > @@ -243,3 +284,62 @@ Tegra194 EP mode: > phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", > "p2u-5", "p2u-6", "p2u-7"; > }; > + > +Tegra234 RP mode: > +----------------- > + > + pcie@141a0000 { > + compatible = "nvidia,tegra234-pcie"; > + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>; > + reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ > + <0x00 0x3a000000 0x0 0x00040000>, /* configuration space (256K) */ > + <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ > + <0x00 0x3a080000 0x0 0x00040000>; /* DBI reg space (256K) */ > + reg-names = "appl", "config", "atu_dma", "dbi"; > + > + status = "disabled"; Why is your example disabled? > + > + #address-cells = <3>; > + #size-cells = <2>; > + device_type = "pci"; > + num-lanes = <8>; > + num-viewport = <8>; > + linux,pci-domain = <5>; > + > + clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>; > + clock-names = "core"; > + > + resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>, > + <&bpmp TEGRA234_RESET_PEX1_CORE_5>; > + reset-names = "apb", "core"; > + > + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ > + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ > + interrupt-names = "intr", "msi"; > + > + #interrupt-cells = <1>; > + interrupt-map-mask = <0 0 0 0>; > + interrupt-map = <0 0 0 0 &gic GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; > + > + nvidia,bpmp = <&bpmp 5>; > + > + nvidia,aspm-cmrt-us = <60>; > + nvidia,aspm-pwr-on-t-us = <20>; > + nvidia,aspm-l0s-entrance-latency-us = <3>; > + > + bus-range = <0x0 0xff>; > + > + ranges = <0x43000000 0x27 0x40000000 0x27 0x40000000 0x3 0xe8000000>, /* prefetchable memory (16000 MB) */ > + <0x02000000 0x0 0x40000000 0x2b 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ > + <0x01000000 0x0 0x3a100000 0x00 0x3a100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ > + > + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE5R &emc>, > + <&mc TEGRA234_MEMORY_CLIENT_PCIE5W &emc>; > + interconnect-names = "dma-mem", "write"; > + > + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, > + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, > + <&p2u_nvhs_6>, <&p2u_nvhs_7>; > + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", > + "p2u-5", "p2u-6", "p2u-7"; > + }; > -- > 2.17.1 > >
diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt index 8e4f9bfb316d..ae9555a50fb0 100644 --- a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt @@ -10,6 +10,8 @@ Required properties: - power-domains: A phandle to the node that controls power to the respective PCIe controller and a specifier name for the PCIe controller. Following are the specifiers for the different PCIe controllers + Tegra194: + --------- TEGRA194_POWER_DOMAIN_PCIEX8B: C0 TEGRA194_POWER_DOMAIN_PCIEX1A: C1 TEGRA194_POWER_DOMAIN_PCIEX1A: C2 @@ -18,6 +20,21 @@ Required properties: TEGRA194_POWER_DOMAIN_PCIEX8A: C5 these specifiers are defined in "include/dt-bindings/power/tegra194-powergate.h" file. + Tegra234: + --------- + TEGRA234_POWER_DOMAIN_PCIEX4BA: C0 + TEGRA234_POWER_DOMAIN_PCIEX1A : C1 + TEGRA234_POWER_DOMAIN_PCIEX1A : C2 + TEGRA234_POWER_DOMAIN_PCIEX1A : C3 + TEGRA234_POWER_DOMAIN_PCIEX4BB: C4 + TEGRA234_POWER_DOMAIN_PCIEX8A : C5 + TEGRA234_POWER_DOMAIN_PCIEX4A : C6 + TEGRA234_POWER_DOMAIN_PCIEX8B : C7 + TEGRA234_POWER_DOMAIN_PCIEX4CA: C8 + TEGRA234_POWER_DOMAIN_PCIEX4CB: C9 + TEGRA234_POWER_DOMAIN_PCIEX4CC: C10 + these specifiers are defined in + "include/dt-bindings/power/tegra234-powergate.h" file. - reg: A list of physical base address and length pairs for each set of controller registers. Must contain an entry for each entry in the reg-names property. @@ -47,16 +64,33 @@ Required properties: "p2u-N": where N ranges from 0 to one less than the total number of lanes - nvidia,bpmp: Must contain a pair of phandle to BPMP controller node followed by controller-id. Following are the controller ids for each controller. + Tegra194: + --------- 0: C0 1: C1 2: C2 3: C3 4: C4 5: C5 + Tegra194: + --------- + 0 : C0 + 1 : C1 + 2 : C2 + 3 : C3 + 4 : C4 + 5 : C5 + 6 : C6 + 7 : C7 + 8 : C8 + 9 : C9 + 10: C10 - vddio-pex-ctl-supply: Regulator supply for PCIe side band signals RC mode: -- compatible: Tegra19x must contain "nvidia,tegra194-pcie" +- compatible: Must be + - "nvidia,tegra194-pcie" for Tegra194 + - "nvidia,tegra234-pcie" for Tegra234 - device_type: Must be "pci" for RC mode - interrupt-names: Must include the following entries: "msi": The Tegra interrupt that is asserted when an MSI is received @@ -99,7 +133,8 @@ In Tegra194, Only controllers C0, C4 & C5 support EP mode. Optional properties: - pinctrl-names: A list of pinctrl state names. - It is mandatory for C5 controller and optional for other controllers. + It is mandatory for C5 controller in Tegra194 and optional for other + controllers. - "default": Configures PCIe I/O for proper operation. - pinctrl-0: phandle for the 'default' state of pin configuration. It is mandatory for C5 controller and optional for other controllers. @@ -108,7 +143,7 @@ Optional properties: improve performance when a platform is designed in such a way that it satisfies at least one of the following conditions thereby enabling root port to exchange optimum number of FC (Flow Control) credits with - downstream devices + downstream devices. This is applicable for only Tegra194. 1. If C0/C4/C5 run at x1/x2 link widths (irrespective of speed and MPS) 2. If C0/C1/C2/C3/C4/C5 operate at their respective max link widths and a) speed is Gen-2 and MPS is 256B @@ -119,6 +154,9 @@ Optional properties: specified in microseconds - nvidia,aspm-l0s-entrance-latency-us: ASPM L0s entrance latency to be specified in microseconds +- nvidia,enable-srns: This boolean property needs to be present if the + controller is configured to operate in SRNS (Separate Reference Clocks with + No Spread-Spectrum Clocking). This is applicable only for Tegra234. RC mode: - vpcie3v3-supply: A phandle to the regulator node that supplies 3.3V to the slot @@ -127,6 +165,9 @@ RC mode: - vpcie12v-supply: A phandle to the regulator node that supplies 12V to the slot if the platform has one such slot. (Ex:- x16 slot owned by C5 controller in p2972-0000 platform). +- nvidia,enable-ext-refclk: This boolean property needs to be present if the + controller is configured to use the reference clocking coming in from an + external clock source instead of using the internal clock source. EP mode: - nvidia,refclk-select-gpios: Must contain a phandle to a GPIO controller @@ -243,3 +284,62 @@ Tegra194 EP mode: phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", "p2u-5", "p2u-6", "p2u-7"; }; + +Tegra234 RP mode: +----------------- + + pcie@141a0000 { + compatible = "nvidia,tegra234-pcie"; + power-domains = <&bpmp TEGRA234_POWER_DOMAIN_PCIEX8A>; + reg = <0x00 0x141a0000 0x0 0x00020000>, /* appl registers (128K) */ + <0x00 0x3a000000 0x0 0x00040000>, /* configuration space (256K) */ + <0x00 0x3a040000 0x0 0x00040000>, /* iATU_DMA reg space (256K) */ + <0x00 0x3a080000 0x0 0x00040000>; /* DBI reg space (256K) */ + reg-names = "appl", "config", "atu_dma", "dbi"; + + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <8>; + num-viewport = <8>; + linux,pci-domain = <5>; + + clocks = <&bpmp TEGRA234_CLK_PEX1_C5_CORE>; + clock-names = "core"; + + resets = <&bpmp TEGRA234_RESET_PEX1_CORE_5_APB>, + <&bpmp TEGRA234_RESET_PEX1_CORE_5>; + reset-names = "apb", "core"; + + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + + nvidia,bpmp = <&bpmp 5>; + + nvidia,aspm-cmrt-us = <60>; + nvidia,aspm-pwr-on-t-us = <20>; + nvidia,aspm-l0s-entrance-latency-us = <3>; + + bus-range = <0x0 0xff>; + + ranges = <0x43000000 0x27 0x40000000 0x27 0x40000000 0x3 0xe8000000>, /* prefetchable memory (16000 MB) */ + <0x02000000 0x0 0x40000000 0x2b 0x28000000 0x0 0x08000000>, /* non-prefetchable memory (128 MB) */ + <0x01000000 0x0 0x3a100000 0x00 0x3a100000 0x0 0x00100000>; /* downstream I/O (1 MB) */ + + interconnects = <&mc TEGRA234_MEMORY_CLIENT_PCIE5R &emc>, + <&mc TEGRA234_MEMORY_CLIENT_PCIE5W &emc>; + interconnect-names = "dma-mem", "write"; + + phys = <&p2u_nvhs_0>, <&p2u_nvhs_1>, <&p2u_nvhs_2>, + <&p2u_nvhs_3>, <&p2u_nvhs_4>, <&p2u_nvhs_5>, + <&p2u_nvhs_6>, <&p2u_nvhs_7>; + phy-names = "p2u-0", "p2u-1", "p2u-2", "p2u-3", "p2u-4", + "p2u-5", "p2u-6", "p2u-7"; + };
Add support for Tegra234 PCIe controllers. These controllers are based on Synopsys DesignWare core IP. Signed-off-by: Vidya Sagar <vidyas@nvidia.com> --- .../bindings/pci/nvidia,tegra194-pcie.txt | 106 +++++++++++++++++- 1 file changed, 103 insertions(+), 3 deletions(-)