| Message ID | 20211004204955.21077-8-stephan@gerhold.net |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | Add support for Samsung Galaxy S4 Mini Value Edition | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success |
On Mon, 04 Oct 2021 22:49:48 +0200, Stephan Gerhold wrote: > Since MSM8916 is an ARM v8 64-bit SoC the CPU cores are normally booted > using "psci" or "spin-table". Unfortunately, some devices come with signed > 32-bit-only firmware without ARM64 and PSCI support. This setup is easy to > support since it's very similar to older 32-bit only Qualcomm SoCs > (e.g. MSM8226) and only requires adding a few new definitions to already > existing drivers. > > Document the qcom,msm8916-smp enable-method. It is actually just an alias > of qcom,msm8226-smp since it should be implemented identically. > The enable-method is only valid on ARM32 and must not be used on ARM64. > > Signed-off-by: Stephan Gerhold <stephan@gerhold.net> > --- > Changes in v2: > - Clarify that this is only supposed to be used on ARM 32-bit > (Add comment to commit message and DT schema) > > The "see above for ARM v8 64-bit" comment refers to this a few lines > above in the DT schema: > > # On ARM v8 64-bit this property is required > - enum: > - psci > - spin-table > --- > Documentation/devicetree/bindings/arm/cpus.yaml | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 11e3e09da2e5..6a95b2a76bdc 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -211,6 +211,8 @@ properties: - qcom,kpss-acc-v1 - qcom,kpss-acc-v2 - qcom,msm8226-smp + # Only valid on ARM 32-bit, see above for ARM v8 64-bit + - qcom,msm8916-smp - renesas,apmu - renesas,r9a06g032-smp - rockchip,rk3036-smp @@ -295,7 +297,8 @@ properties: Specifies the ACC* node associated with this CPU. Required for systems that have an "enable-method" property - value of "qcom,kpss-acc-v1", "qcom,kpss-acc-v2" or "qcom,msm8226-smp" + value of "qcom,kpss-acc-v1", "qcom,kpss-acc-v2", "qcom,msm8226-smp" + or "qcom,msm8916-smp". * arm/msm/qcom,kpss-acc.txt
Since MSM8916 is an ARM v8 64-bit SoC the CPU cores are normally booted using "psci" or "spin-table". Unfortunately, some devices come with signed 32-bit-only firmware without ARM64 and PSCI support. This setup is easy to support since it's very similar to older 32-bit only Qualcomm SoCs (e.g. MSM8226) and only requires adding a few new definitions to already existing drivers. Document the qcom,msm8916-smp enable-method. It is actually just an alias of qcom,msm8226-smp since it should be implemented identically. The enable-method is only valid on ARM32 and must not be used on ARM64. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> --- Changes in v2: - Clarify that this is only supposed to be used on ARM 32-bit (Add comment to commit message and DT schema) The "see above for ARM v8 64-bit" comment refers to this a few lines above in the DT schema: # On ARM v8 64-bit this property is required - enum: - psci - spin-table --- Documentation/devicetree/bindings/arm/cpus.yaml | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)