diff mbox series

[1/2] dt-bindings: display: panel: Add Truly NT35521 panel support

Message ID 20210804081352.30595-2-shawn.guo@linaro.org
State Changes Requested, archived
Headers show
Series Add Truly NT35521 panel driver support | expand

Checks

Context Check Description
robh/checkpatch success
robh/dt-meta-schema success
robh/dtbs-check success

Commit Message

Shawn Guo Aug. 4, 2021, 8:13 a.m. UTC
The Truly NT35521 is a 5.24" 1280x720 DSI panel, and the backlight is
managed through DSI link.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 .../bindings/display/panel/truly,nt35521.yaml | 62 +++++++++++++++++++
 1 file changed, 62 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/truly,nt35521.yaml

Comments

Shawn Guo Aug. 8, 2021, 12:04 p.m. UTC | #1
On Wed, Aug 04, 2021 at 06:03:54PM +0200, Sam Ravnborg wrote:
> Hi Shawn,
> 
> On Wed, Aug 04, 2021 at 04:13:51PM +0800, Shawn Guo wrote:
> > The Truly NT35521 is a 5.24" 1280x720 DSI panel, and the backlight is
> > managed through DSI link.
> > 
> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> 
> Please consider adding an optional port node, so we can use this panels
> in a setup using a graph.

Sure, will do in v2.

> A simple port: true would do the trick.
> I am aware that it may not be used today, this is a preparation for
> potential future use.
> 
> With this fixed,
> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>

Thanks, Sam!

Shawn
Rob Herring (Arm) Aug. 11, 2021, 6:51 p.m. UTC | #2
On Wed, Aug 04, 2021 at 04:13:51PM +0800, Shawn Guo wrote:
> The Truly NT35521 is a 5.24" 1280x720 DSI panel, and the backlight is
> managed through DSI link.
> 
> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> ---
>  .../bindings/display/panel/truly,nt35521.yaml | 62 +++++++++++++++++++
>  1 file changed, 62 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/truly,nt35521.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/truly,nt35521.yaml b/Documentation/devicetree/bindings/display/panel/truly,nt35521.yaml
> new file mode 100644
> index 000000000000..4727c3df6eb8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/truly,nt35521.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/truly,nt35521.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Truly NT35521 5.24" 1280x720 MIPI-DSI Panel
> +
> +maintainers:
> +  - Shawn Guo <shawn.guo@linaro.org>
> +
> +description: |
> +  The Truly NT35521 is a 5.24" 1280x720 MIPI-DSI panel.  The panel backlight
> +  is managed through DSI link.
> +
> +allOf:
> +  - $ref: panel-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: truly,nt35521
> +
> +  reg: true
> +
> +  reset-gpios: true
> +
> +  enable-gpios: true
> +
> +  pwr-positive5-gpios:
> +    maxItems: 1
> +
> +  pwr-negative5-gpios:
> +    maxItems: 1

Are these +/-5V supplies? If so, they should be modeled with 
gpio-regulator perhaps unless the panel connection could only ever be 
GPIOs.

> +
> +required:
> +  - compatible
> +  - reg
> +  - reset-gpios
> +  - enable-gpios
> +  - pwr-positive5-gpios
> +  - pwr-negative5-gpios
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    dsi {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        panel@0 {
> +            compatible = "truly,nt35521";
> +            reg = <0>;
> +            reset-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>;
> +            pwr-positive5-gpios = <&msmgpio 114 GPIO_ACTIVE_HIGH>;
> +            pwr-negative5-gpios = <&msmgpio 17 GPIO_ACTIVE_HIGH>;
> +            enable-gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>;
> +        };
> +    };
> +...
> -- 
> 2.17.1
> 
>
Shawn Guo Aug. 13, 2021, 1:59 p.m. UTC | #3
On Wed, Aug 11, 2021 at 12:51:56PM -0600, Rob Herring wrote:
> On Wed, Aug 04, 2021 at 04:13:51PM +0800, Shawn Guo wrote:
> > The Truly NT35521 is a 5.24" 1280x720 DSI panel, and the backlight is
> > managed through DSI link.
> > 
> > Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
> > ---
> >  .../bindings/display/panel/truly,nt35521.yaml | 62 +++++++++++++++++++
> >  1 file changed, 62 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/display/panel/truly,nt35521.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/display/panel/truly,nt35521.yaml b/Documentation/devicetree/bindings/display/panel/truly,nt35521.yaml
> > new file mode 100644
> > index 000000000000..4727c3df6eb8
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/panel/truly,nt35521.yaml
> > @@ -0,0 +1,62 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/panel/truly,nt35521.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Truly NT35521 5.24" 1280x720 MIPI-DSI Panel
> > +
> > +maintainers:
> > +  - Shawn Guo <shawn.guo@linaro.org>
> > +
> > +description: |
> > +  The Truly NT35521 is a 5.24" 1280x720 MIPI-DSI panel.  The panel backlight
> > +  is managed through DSI link.
> > +
> > +allOf:
> > +  - $ref: panel-common.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    const: truly,nt35521
> > +
> > +  reg: true
> > +
> > +  reset-gpios: true
> > +
> > +  enable-gpios: true
> > +
> > +  pwr-positive5-gpios:
> > +    maxItems: 1
> > +
> > +  pwr-negative5-gpios:
> > +    maxItems: 1
> 
> Are these +/-5V supplies? If so, they should be modeled with 
> gpio-regulator perhaps unless the panel connection could only ever be 
> GPIOs.

Hi Rob,

The binding has been updated in v2 [1].  Please help review that.
Thanks!

Shawn

[1] https://lore.kernel.org/linux-arm-msm/20210809051008.6172-2-shawn.guo@linaro.org/T/#m587035a602b1be6c5326dcf24af01b3e8a5d2cc9

> 
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - reset-gpios
> > +  - enable-gpios
> > +  - pwr-positive5-gpios
> > +  - pwr-negative5-gpios
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/gpio/gpio.h>
> > +
> > +    dsi {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        panel@0 {
> > +            compatible = "truly,nt35521";
> > +            reg = <0>;
> > +            reset-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>;
> > +            pwr-positive5-gpios = <&msmgpio 114 GPIO_ACTIVE_HIGH>;
> > +            pwr-negative5-gpios = <&msmgpio 17 GPIO_ACTIVE_HIGH>;
> > +            enable-gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>;
> > +        };
> > +    };
> > +...
> > -- 
> > 2.17.1
> > 
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/panel/truly,nt35521.yaml b/Documentation/devicetree/bindings/display/panel/truly,nt35521.yaml
new file mode 100644
index 000000000000..4727c3df6eb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/truly,nt35521.yaml
@@ -0,0 +1,62 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/truly,nt35521.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Truly NT35521 5.24" 1280x720 MIPI-DSI Panel
+
+maintainers:
+  - Shawn Guo <shawn.guo@linaro.org>
+
+description: |
+  The Truly NT35521 is a 5.24" 1280x720 MIPI-DSI panel.  The panel backlight
+  is managed through DSI link.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: truly,nt35521
+
+  reg: true
+
+  reset-gpios: true
+
+  enable-gpios: true
+
+  pwr-positive5-gpios:
+    maxItems: 1
+
+  pwr-negative5-gpios:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - enable-gpios
+  - pwr-positive5-gpios
+  - pwr-negative5-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "truly,nt35521";
+            reg = <0>;
+            reset-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>;
+            pwr-positive5-gpios = <&msmgpio 114 GPIO_ACTIVE_HIGH>;
+            pwr-negative5-gpios = <&msmgpio 17 GPIO_ACTIVE_HIGH>;
+            enable-gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>;
+        };
+    };
+...