@@ -70,6 +70,28 @@ properties:
a remote serializer whose high-threshold noise immunity is not enabled
is 100000 micro volts
+ maxim,gpio-poc:
+ $ref: '/schemas/types.yaml#/definitions/uint32-array'
+ minItems: 2
+ maxItems: 2
+ description: |
+ Index of the MAX9286 gpio output line (0 or 1) that controls Power over
+ Coax to the cameras and its associated polarity flag.
+
+ The property accepts an array of two unsigned integers, the first being
+ the gpio line index (0 or 1) and the second being the gpio line polarity
+ flag (GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW) as defined in
+ <include/dt-bindings/gpio/gpio.h>.
+
+ When the remote cameras power is controlled by one of the MAX9286 gpio
+ lines, this property has to be used to specify which line among the two
+ available ones controls the remote camera power enablement.
+
+ When this property is used it is not possible to register a gpio
+ controller as the gpio lines are controlled directly by the MAX9286 and
+ not available for consumers, nor the 'poc-supply' property should be
+ specified.
+
ports:
$ref: /schemas/graph.yaml#/properties/ports
@@ -182,7 +204,16 @@ required:
- reg
- ports
- i2c-mux
- - gpio-controller
+
+# If 'maxim,gpio-poc' is present, then 'poc-supply' and 'gpio-controller'
+# are not allowed.
+if:
+ required:
+ - maxim,gpio-poc
+then:
+ properties:
+ poc-supply: false
+ gpio-controller: false
additionalProperties: false
@@ -327,4 +358,38 @@ examples:
};
};
};
+
+ /*
+ * Example of a deserializer that controls the camera Power over Coax
+ * through one of its gpio lines.
+ */
+ gmsl-deserializer@6c {
+ compatible = "maxim,max9286";
+ reg = <0x6c>;
+ enable-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
+
+ /*
+ * The remote camera power is controlled by MAX9286 GPIO line #0.
+ * No 'poc-supply' nor 'gpio-controller' are specified.
+ */
+ maxim,gpio-poc = <0 GPIO_ACTIVE_LOW>;
+
+ /*
+ * Do not describe connections as they're the same as in the previous
+ * example.
+ */
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@4 {
+ reg = <4>;
+ };
+ };
+
+ i2c-mux {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
};