| Message ID | 20210304044803.812204-2-danielwa@cisco.com |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | None | expand |
| Context | Check | Description |
|---|---|---|
| robh/checkpatch | success |
Le 04/03/2021 à 05:47, Daniel Walker a écrit : > It looks like there's some seepage of cmdline stuff into > the generic device tree code. This conflicts with the > generic cmdline implementation so I remove it in the case > when that's enabled. > > Cc: xe-linux-external@cisco.com > Signed-off-by: Ruslan Ruslichenko <rruslich@cisco.com> > Signed-off-by: Daniel Walker <danielwa@cisco.com> > --- > drivers/of/fdt.c | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c > index feb0f2d67fc5..cfe4f8d3c9f5 100644 > --- a/drivers/of/fdt.c > +++ b/drivers/of/fdt.c > @@ -25,6 +25,7 @@ > #include <linux/serial_core.h> > #include <linux/sysfs.h> > #include <linux/random.h> > +#include <linux/cmdline.h> > > #include <asm/setup.h> /* for COMMAND_LINE_SIZE */ > #include <asm/page.h> > @@ -1048,8 +1049,18 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname, > > early_init_dt_check_for_initrd(node); > > +#ifdef CONFIG_GENERIC_CMDLINE > /* Retrieve command line */ > p = of_get_flat_dt_prop(node, "bootargs", &l); > + > + /* > + * The builtin command line will be added here, or it can override > + * with the DT bootargs. > + */ > + cmdline_add_builtin(data, > + ((p != NULL && l > 0) ? p : NULL), /* This is sanity checking */ Can we do more simple ? If p is NULL, p is already NULL, so (l > 0 ? p : NULL) should be enough. > + COMMAND_LINE_SIZE); > +#else What does p contains now that "p = of_get_flat_dt_prop(node, "bootargs", &l);" is only called when CONFIG_GENERIC_CMDLINE is defined ? > if (p != NULL && l > 0) > strlcpy(data, p, min(l, COMMAND_LINE_SIZE)); > > @@ -1070,6 +1081,7 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname, > strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE); > #endif > #endif /* CONFIG_CMDLINE */ > +#endif /* CONFIG_GENERIC_CMDLINE */ > > pr_debug("Command line is: %s\n", (char *)data); > >
On Wed, Mar 3, 2021 at 10:48 PM Daniel Walker <danielwa@cisco.com> wrote: > > It looks like there's some seepage of cmdline stuff into > the generic device tree code. This conflicts with the > generic cmdline implementation so I remove it in the case > when that's enabled. > > Cc: xe-linux-external@cisco.com > Signed-off-by: Ruslan Ruslichenko <rruslich@cisco.com> > Signed-off-by: Daniel Walker <danielwa@cisco.com> > --- > drivers/of/fdt.c | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c > index feb0f2d67fc5..cfe4f8d3c9f5 100644 > --- a/drivers/of/fdt.c > +++ b/drivers/of/fdt.c > @@ -25,6 +25,7 @@ > #include <linux/serial_core.h> > #include <linux/sysfs.h> > #include <linux/random.h> > +#include <linux/cmdline.h> > > #include <asm/setup.h> /* for COMMAND_LINE_SIZE */ > #include <asm/page.h> > @@ -1048,8 +1049,18 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname, > > early_init_dt_check_for_initrd(node); > > +#ifdef CONFIG_GENERIC_CMDLINE What I like about Christophe's version is it removes the old DT implementation. Who's going to convert the rest of the DT based arches? That's arm, arm64, hexagon, microblaze, nios2, openrisc, riscv, sh, and xtensa. Either separate the common code from the config like Christophe's version or these all need converting. Though it's fine to hash out patch 1 with a couple of arches first. > /* Retrieve command line */ > p = of_get_flat_dt_prop(node, "bootargs", &l); This needs to be outside the ifdef. > + > + /* > + * The builtin command line will be added here, or it can override > + * with the DT bootargs. > + */ > + cmdline_add_builtin(data, > + ((p != NULL && l > 0) ? p : NULL), /* This is sanity checking */ > + COMMAND_LINE_SIZE); > +#else > if (p != NULL && l > 0) > strlcpy(data, p, min(l, COMMAND_LINE_SIZE)); > > @@ -1070,6 +1081,7 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname, > strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE); > #endif > #endif /* CONFIG_CMDLINE */ > +#endif /* CONFIG_GENERIC_CMDLINE */ > > pr_debug("Command line is: %s\n", (char *)data); > > -- > 2.25.1 >
On Thu, Mar 04, 2021 at 08:32:37AM -0600, Rob Herring wrote: > On Wed, Mar 3, 2021 at 10:48 PM Daniel Walker <danielwa@cisco.com> wrote: > > > > It looks like there's some seepage of cmdline stuff into > > the generic device tree code. This conflicts with the > > generic cmdline implementation so I remove it in the case > > when that's enabled. > > > > Cc: xe-linux-external@cisco.com > > Signed-off-by: Ruslan Ruslichenko <rruslich@cisco.com> > > Signed-off-by: Daniel Walker <danielwa@cisco.com> > > --- > > drivers/of/fdt.c | 12 ++++++++++++ > > 1 file changed, 12 insertions(+) > > > > diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c > > index feb0f2d67fc5..cfe4f8d3c9f5 100644 > > --- a/drivers/of/fdt.c > > +++ b/drivers/of/fdt.c > > @@ -25,6 +25,7 @@ > > #include <linux/serial_core.h> > > #include <linux/sysfs.h> > > #include <linux/random.h> > > +#include <linux/cmdline.h> > > > > #include <asm/setup.h> /* for COMMAND_LINE_SIZE */ > > #include <asm/page.h> > > @@ -1048,8 +1049,18 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname, > > > > early_init_dt_check_for_initrd(node); > > > > +#ifdef CONFIG_GENERIC_CMDLINE > > What I like about Christophe's version is it removes the old DT > implementation. Who's going to convert the rest of the DT based > arches? That's arm, arm64, hexagon, microblaze, nios2, openrisc, > riscv, sh, and xtensa. Either separate the common code from the config > like Christophe's version or these all need converting. Though it's > fine to hash out patch 1 with a couple of arches first. I'm limited in what I can test, so I can't know for sure that I have something which works on those architectures. Even powerpc 64 is part of this series but I can't really test it at this time. Also Cisco's needs out strip the implementation of extend or override. I have un-tested conversions for arm32, arm64, c6x, microblaze, nios2, and openrisc. These could go into -next and we can see who complains. The implementation on these architectures isn't all uniform. > > /* Retrieve command line */ > > p = of_get_flat_dt_prop(node, "bootargs", &l); > > This needs to be outside the ifdef. Ok .. Daniel
On Thu, Mar 04, 2021 at 08:09:52AM +0100, Christophe Leroy wrote: > > > Le 04/03/2021 à 05:47, Daniel Walker a écrit : > > It looks like there's some seepage of cmdline stuff into > > the generic device tree code. This conflicts with the > > generic cmdline implementation so I remove it in the case > > when that's enabled. > > > > Cc: xe-linux-external@cisco.com > > Signed-off-by: Ruslan Ruslichenko <rruslich@cisco.com> > > Signed-off-by: Daniel Walker <danielwa@cisco.com> > > --- > > drivers/of/fdt.c | 12 ++++++++++++ > > 1 file changed, 12 insertions(+) > > > > diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c > > index feb0f2d67fc5..cfe4f8d3c9f5 100644 > > --- a/drivers/of/fdt.c > > +++ b/drivers/of/fdt.c > > @@ -25,6 +25,7 @@ > > #include <linux/serial_core.h> > > #include <linux/sysfs.h> > > #include <linux/random.h> > > +#include <linux/cmdline.h> > > #include <asm/setup.h> /* for COMMAND_LINE_SIZE */ > > #include <asm/page.h> > > @@ -1048,8 +1049,18 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname, > > early_init_dt_check_for_initrd(node); > > +#ifdef CONFIG_GENERIC_CMDLINE > > /* Retrieve command line */ > > p = of_get_flat_dt_prop(node, "bootargs", &l); > > + > > + /* > > + * The builtin command line will be added here, or it can override > > + * with the DT bootargs. > > + */ > > + cmdline_add_builtin(data, > > + ((p != NULL && l > 0) ? p : NULL), /* This is sanity checking */ > > Can we do more simple ? If p is NULL, p is already NULL, so (l > 0 ? p : NULL) should be enough. I believe Rob gave me this line. Maybe he can comment on it. Daniel
On Thu, Mar 4, 2021 at 3:24 PM Daniel Walker <danielwa@cisco.com> wrote: > > On Thu, Mar 04, 2021 at 08:09:52AM +0100, Christophe Leroy wrote: > > > > > > Le 04/03/2021 à 05:47, Daniel Walker a écrit : > > > It looks like there's some seepage of cmdline stuff into > > > the generic device tree code. This conflicts with the > > > generic cmdline implementation so I remove it in the case > > > when that's enabled. > > > > > > Cc: xe-linux-external@cisco.com > > > Signed-off-by: Ruslan Ruslichenko <rruslich@cisco.com> > > > Signed-off-by: Daniel Walker <danielwa@cisco.com> > > > --- > > > drivers/of/fdt.c | 12 ++++++++++++ > > > 1 file changed, 12 insertions(+) > > > > > > diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c > > > index feb0f2d67fc5..cfe4f8d3c9f5 100644 > > > --- a/drivers/of/fdt.c > > > +++ b/drivers/of/fdt.c > > > @@ -25,6 +25,7 @@ > > > #include <linux/serial_core.h> > > > #include <linux/sysfs.h> > > > #include <linux/random.h> > > > +#include <linux/cmdline.h> > > > #include <asm/setup.h> /* for COMMAND_LINE_SIZE */ > > > #include <asm/page.h> > > > @@ -1048,8 +1049,18 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname, > > > early_init_dt_check_for_initrd(node); > > > +#ifdef CONFIG_GENERIC_CMDLINE > > > /* Retrieve command line */ > > > p = of_get_flat_dt_prop(node, "bootargs", &l); > > > + > > > + /* > > > + * The builtin command line will be added here, or it can override > > > + * with the DT bootargs. > > > + */ > > > + cmdline_add_builtin(data, > > > + ((p != NULL && l > 0) ? p : NULL), /* This is sanity checking */ > > > > Can we do more simple ? If p is NULL, p is already NULL, so (l > 0 ? p : NULL) should be enough. > > > I believe Rob gave me this line. Maybe he can comment on it. It's an obvious improvement and LGTM.
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index feb0f2d67fc5..cfe4f8d3c9f5 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -25,6 +25,7 @@ #include <linux/serial_core.h> #include <linux/sysfs.h> #include <linux/random.h> +#include <linux/cmdline.h> #include <asm/setup.h> /* for COMMAND_LINE_SIZE */ #include <asm/page.h> @@ -1048,8 +1049,18 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname, early_init_dt_check_for_initrd(node); +#ifdef CONFIG_GENERIC_CMDLINE /* Retrieve command line */ p = of_get_flat_dt_prop(node, "bootargs", &l); + + /* + * The builtin command line will be added here, or it can override + * with the DT bootargs. + */ + cmdline_add_builtin(data, + ((p != NULL && l > 0) ? p : NULL), /* This is sanity checking */ + COMMAND_LINE_SIZE); +#else if (p != NULL && l > 0) strlcpy(data, p, min(l, COMMAND_LINE_SIZE)); @@ -1070,6 +1081,7 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname, strlcpy(data, CONFIG_CMDLINE, COMMAND_LINE_SIZE); #endif #endif /* CONFIG_CMDLINE */ +#endif /* CONFIG_GENERIC_CMDLINE */ pr_debug("Command line is: %s\n", (char *)data);