diff mbox series

[v4,1/2] dt-bindings: drm/bridge: anx7625: Add power supplies

Message ID 20210224061409.3996755-1-hsinyi@chromium.org
State Not Applicable, archived
Headers show
Series [v4,1/2] dt-bindings: drm/bridge: anx7625: Add power supplies | expand

Checks

Context Check Description
robh/checkpatch success
robh/dt-meta-schema success
robh/dtbs-check success

Commit Message

Hsin-Yi Wang Feb. 24, 2021, 6:14 a.m. UTC 
anx7625 requires 3 power supply regulators.

Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
---
v3->v4: rebase to drm-misc/for-linux-next
---
 .../bindings/display/bridge/analogix,anx7625.yaml | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

Comments

Hsin-Yi Wang March 18, 2021, 4:26 a.m. UTC | #1 
On Wed, Feb 24, 2021 at 2:14 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
>
> When suspending the driver, anx7625_power_standby() will be called to
> turn off reset-gpios and enable-gpios. However, power supplies are not
> disabled. To save power, the driver can get the power supply regulators
> and turn off them in anx7625_power_standby().
>
> Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> Reviewed-by: Robert Foss <robert.foss@linaro.org>
> ---

Ping on the thread, thanks.

>  drivers/gpu/drm/bridge/analogix/anx7625.c | 34 +++++++++++++++++++++++
>  drivers/gpu/drm/bridge/analogix/anx7625.h |  1 +
>  2 files changed, 35 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> index 65cc05982f826..23283ba0c4f93 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> @@ -11,6 +11,7 @@
>  #include <linux/kernel.h>
>  #include <linux/module.h>
>  #include <linux/mutex.h>
> +#include <linux/regulator/consumer.h>
>  #include <linux/slab.h>
>  #include <linux/types.h>
>  #include <linux/workqueue.h>
> @@ -875,12 +876,25 @@ static int sp_tx_edid_read(struct anx7625_data *ctx,
>  static void anx7625_power_on(struct anx7625_data *ctx)
>  {
>         struct device *dev = &ctx->client->dev;
> +       int ret, i;
>
>         if (!ctx->pdata.low_power_mode) {
>                 DRM_DEV_DEBUG_DRIVER(dev, "not low power mode!\n");
>                 return;
>         }
>
> +       for (i = 0; i < ARRAY_SIZE(ctx->pdata.supplies); i++) {
> +               ret = regulator_enable(ctx->pdata.supplies[i].consumer);
> +               if (ret < 0) {
> +                       DRM_DEV_DEBUG_DRIVER(dev, "cannot enable supply %d: %d\n",
> +                                            i, ret);
> +                       goto reg_err;
> +               }
> +               usleep_range(2000, 2100);
> +       }
> +
> +       usleep_range(4000, 4100);
> +
>         /* Power on pin enable */
>         gpiod_set_value(ctx->pdata.gpio_p_on, 1);
>         usleep_range(10000, 11000);
> @@ -889,11 +903,16 @@ static void anx7625_power_on(struct anx7625_data *ctx)
>         usleep_range(10000, 11000);
>
>         DRM_DEV_DEBUG_DRIVER(dev, "power on !\n");
> +       return;
> +reg_err:
> +       for (--i; i >= 0; i--)
> +               regulator_disable(ctx->pdata.supplies[i].consumer);
>  }
>
>  static void anx7625_power_standby(struct anx7625_data *ctx)
>  {
>         struct device *dev = &ctx->client->dev;
> +       int ret;
>
>         if (!ctx->pdata.low_power_mode) {
>                 DRM_DEV_DEBUG_DRIVER(dev, "not low power mode!\n");
> @@ -904,6 +923,12 @@ static void anx7625_power_standby(struct anx7625_data *ctx)
>         usleep_range(1000, 1100);
>         gpiod_set_value(ctx->pdata.gpio_p_on, 0);
>         usleep_range(1000, 1100);
> +
> +       ret = regulator_bulk_disable(ARRAY_SIZE(ctx->pdata.supplies),
> +                                    ctx->pdata.supplies);
> +       if (ret < 0)
> +               DRM_DEV_DEBUG_DRIVER(dev, "cannot disable supplies %d\n", ret);
> +
>         DRM_DEV_DEBUG_DRIVER(dev, "power down\n");
>  }
>
> @@ -1742,6 +1767,15 @@ static int anx7625_i2c_probe(struct i2c_client *client,
>         platform->client = client;
>         i2c_set_clientdata(client, platform);
>
> +       pdata->supplies[0].supply = "vdd10";
> +       pdata->supplies[1].supply = "vdd18";
> +       pdata->supplies[2].supply = "vdd33";
> +       ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(pdata->supplies),
> +                                     pdata->supplies);
> +       if (ret) {
> +               DRM_DEV_ERROR(dev, "fail to get power supplies: %d\n", ret);
> +               return ret;
> +       }
>         anx7625_init_gpio(platform);
>
>         atomic_set(&platform->power_status, 0);
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
> index 193ad86c54503..e4a086b3a3d7b 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.h
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
> @@ -350,6 +350,7 @@ struct s_edid_data {
>  struct anx7625_platform_data {
>         struct gpio_desc *gpio_p_on;
>         struct gpio_desc *gpio_reset;
> +       struct regulator_bulk_data supplies[3];
>         struct drm_bridge *panel_bridge;
>         int intp_irq;
>         u32 low_power_mode;
> --
> 2.30.1.766.gb4fecdf3b7-goog
>
Xin Ji March 19, 2021, 2:49 a.m. UTC | #2 
On Thu, Mar 18, 2021 at 12:26:25PM +0800, Hsin-Yi Wang wrote:
> On Wed, Feb 24, 2021 at 2:14 PM Hsin-Yi Wang <hsinyi@chromium.org> wrote:
> >
> > When suspending the driver, anx7625_power_standby() will be called to
> > turn off reset-gpios and enable-gpios. However, power supplies are not
> > disabled. To save power, the driver can get the power supply regulators
> > and turn off them in anx7625_power_standby().
> >
> > Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
> > Reviewed-by: Robert Foss <robert.foss@linaro.org>
> > ---
Hi Hsin-Yi, it's OK for me, please add my r-b.
Reviewed-by: Xin Ji <xji@analogixsemi.com>

Thanks,
Xin
> 
> Ping on the thread, thanks.
> 
> >  drivers/gpu/drm/bridge/analogix/anx7625.c | 34 +++++++++++++++++++++++
> >  drivers/gpu/drm/bridge/analogix/anx7625.h |  1 +
> >  2 files changed, 35 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > index 65cc05982f826..23283ba0c4f93 100644
> > --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> > @@ -11,6 +11,7 @@
> >  #include <linux/kernel.h>
> >  #include <linux/module.h>
> >  #include <linux/mutex.h>
> > +#include <linux/regulator/consumer.h>
> >  #include <linux/slab.h>
> >  #include <linux/types.h>
> >  #include <linux/workqueue.h>
> > @@ -875,12 +876,25 @@ static int sp_tx_edid_read(struct anx7625_data *ctx,
> >  static void anx7625_power_on(struct anx7625_data *ctx)
> >  {
> >         struct device *dev = &ctx->client->dev;
> > +       int ret, i;
> >
> >         if (!ctx->pdata.low_power_mode) {
> >                 DRM_DEV_DEBUG_DRIVER(dev, "not low power mode!\n");
> >                 return;
> >         }
> >
> > +       for (i = 0; i < ARRAY_SIZE(ctx->pdata.supplies); i++) {
> > +               ret = regulator_enable(ctx->pdata.supplies[i].consumer);
> > +               if (ret < 0) {
> > +                       DRM_DEV_DEBUG_DRIVER(dev, "cannot enable supply %d: %d\n",
> > +                                            i, ret);
> > +                       goto reg_err;
> > +               }
> > +               usleep_range(2000, 2100);
> > +       }
> > +
> > +       usleep_range(4000, 4100);
> > +
> >         /* Power on pin enable */
> >         gpiod_set_value(ctx->pdata.gpio_p_on, 1);
> >         usleep_range(10000, 11000);
> > @@ -889,11 +903,16 @@ static void anx7625_power_on(struct anx7625_data *ctx)
> >         usleep_range(10000, 11000);
> >
> >         DRM_DEV_DEBUG_DRIVER(dev, "power on !\n");
> > +       return;
> > +reg_err:
> > +       for (--i; i >= 0; i--)
> > +               regulator_disable(ctx->pdata.supplies[i].consumer);
> >  }
> >
> >  static void anx7625_power_standby(struct anx7625_data *ctx)
> >  {
> >         struct device *dev = &ctx->client->dev;
> > +       int ret;
> >
> >         if (!ctx->pdata.low_power_mode) {
> >                 DRM_DEV_DEBUG_DRIVER(dev, "not low power mode!\n");
> > @@ -904,6 +923,12 @@ static void anx7625_power_standby(struct anx7625_data *ctx)
> >         usleep_range(1000, 1100);
> >         gpiod_set_value(ctx->pdata.gpio_p_on, 0);
> >         usleep_range(1000, 1100);
> > +
> > +       ret = regulator_bulk_disable(ARRAY_SIZE(ctx->pdata.supplies),
> > +                                    ctx->pdata.supplies);
> > +       if (ret < 0)
> > +               DRM_DEV_DEBUG_DRIVER(dev, "cannot disable supplies %d\n", ret);
> > +
> >         DRM_DEV_DEBUG_DRIVER(dev, "power down\n");
> >  }
> >
> > @@ -1742,6 +1767,15 @@ static int anx7625_i2c_probe(struct i2c_client *client,
> >         platform->client = client;
> >         i2c_set_clientdata(client, platform);
> >
> > +       pdata->supplies[0].supply = "vdd10";
> > +       pdata->supplies[1].supply = "vdd18";
> > +       pdata->supplies[2].supply = "vdd33";
> > +       ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(pdata->supplies),
> > +                                     pdata->supplies);
> > +       if (ret) {
> > +               DRM_DEV_ERROR(dev, "fail to get power supplies: %d\n", ret);
> > +               return ret;
> > +       }
> >         anx7625_init_gpio(platform);
> >
> >         atomic_set(&platform->power_status, 0);
> > diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
> > index 193ad86c54503..e4a086b3a3d7b 100644
> > --- a/drivers/gpu/drm/bridge/analogix/anx7625.h
> > +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
> > @@ -350,6 +350,7 @@ struct s_edid_data {
> >  struct anx7625_platform_data {
> >         struct gpio_desc *gpio_p_on;
> >         struct gpio_desc *gpio_reset;
> > +       struct regulator_bulk_data supplies[3];
> >         struct drm_bridge *panel_bridge;
> >         int intp_irq;
> >         u32 low_power_mode;
> > --
> > 2.30.1.766.gb4fecdf3b7-goog
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
index c789784efe306..ab48ab2f4240d 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
@@ -34,6 +34,15 @@  properties:
     description: used for reset chip control, RESET_N pin B7.
     maxItems: 1
 
+  vdd10-supply:
+    description: Regulator that provides the supply 1.0V power.
+
+  vdd18-supply:
+    description: Regulator that provides the supply 1.8V power.
+
+  vdd33-supply:
+    description: Regulator that provides the supply 3.3V power.
+
   ports:
     $ref: /schemas/graph.yaml#/properties/ports
 
@@ -55,6 +64,9 @@  properties:
 required:
   - compatible
   - reg
+  - vdd10-supply
+  - vdd18-supply
+  - vdd33-supply
   - ports
 
 additionalProperties: false
@@ -72,6 +84,9 @@  examples:
             reg = <0x58>;
             enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>;
             reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
+            vdd10-supply = <&pp1000_mipibrdg>;
+            vdd18-supply = <&pp1800_mipibrdg>;
+            vdd33-supply = <&pp3300_mipibrdg>;
 
             ports {
                 #address-cells = <1>;