From patchwork Wed Jan 6 13:22:23 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= X-Patchwork-Id: 1422942 Return-Path: X-Original-To: incoming-dt@patchwork.ozlabs.org Delivered-To: patchwork-incoming-dt@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=devicetree-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: ozlabs.org; dkim=pass (2048-bit key; unprotected) header.d=gmail.com header.i=@gmail.com header.a=rsa-sha256 header.s=20161025 header.b=pYmQTivt; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by ozlabs.org (Postfix) with ESMTP id 4D9qnK3WPQz9sVw for ; Thu, 7 Jan 2021 00:23:33 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727056AbhAFNXP (ORCPT ); Wed, 6 Jan 2021 08:23:15 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46556 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726830AbhAFNXP (ORCPT ); Wed, 6 Jan 2021 08:23:15 -0500 Received: from mail-lf1-x131.google.com (mail-lf1-x131.google.com [IPv6:2a00:1450:4864:20::131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id BB264C06134D; Wed, 6 Jan 2021 05:22:34 -0800 (PST) Received: by mail-lf1-x131.google.com with SMTP id 23so6395969lfg.10; Wed, 06 Jan 2021 05:22:34 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=iWPBnB7voP+PVDyp9nG7j3DkIkNDJc8RHIZwnRN+67s=; b=pYmQTivtd2k2fXNO8YvdG39r6g0gZCPTM3bNlmeIYIpKn/Jixc+4fV3k9GVygIAne6 SgsV8UIZO5FK13Zvc6mtJSZZImBBM4qUqhOTQ3n7DMDCM1CNkczgZVpj5QEZFQ8St+qq kEyE5D0X7bzhJp8JZ+kAThhOoo7S3mP/m+qSXed5ql3FfLBBruuBU+aahLYoUkyVHzQR /TG/0UvKOPQi71OcDasN3ruMqaYvZo5fSCYsM2AFOK1rB1AapBioWNsvqgGmxmqTsLUh 6R6T+tBYaN3g7myFPVefBo50f5Ti5EabdpskXy/Qvlk9fMk4wdlh3PK0+aF1v8c9oGxS tSmw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=iWPBnB7voP+PVDyp9nG7j3DkIkNDJc8RHIZwnRN+67s=; b=F68n23bavC8y8E5i+HivkV3KIo+v2uTiX5BTLRPwvgIKRZwHnf3Z+lJm1WR48OMQAg UBqFSjzV3ck+DpXsEsIcKZ5Vi2pYTqL5v77WOADGNOPUPlM7JG3bArRroVZC3y5b9ld7 JkSsG4N6huDlV0XEl0wieWZYIZvd1ImMz/gWKGI5088YBPVb6dNts6230dwiBM1OkRgk Tu6tdR07Fbbdk5BEjFjs+eDFaxEpmo7iy/K5MKPQ6TAoll2VGLyGczaY7wmj2QPv3p8t AKEDgBcliIA0thArTPmpAaGppByNAshjXoj2+ZHP0R+HXunZ6+N6BwnjgmvoAsPBgBVe 8dBQ== X-Gm-Message-State: AOAM532A8tfF9Qc+yontCP7FXD9m4ATZMzHmXuoalJsHr5BqeWIXU6T/ QjT/YJb9bfF7myVPXTA9ZpU= X-Google-Smtp-Source: ABdhPJwBh/bZP+D9LWCSlmfzIh9mx7Xu5RzWHuDDyXgxTCqs9qxChiporMTqLAA6D2d1qflEFuA3AA== X-Received: by 2002:a2e:a310:: with SMTP id l16mr2242648lje.142.1609939353141; Wed, 06 Jan 2021 05:22:33 -0800 (PST) Received: from localhost.lan (ip-194-187-74-233.konfederacka.maverick.com.pl. [194.187.74.233]) by smtp.gmail.com with ESMTPSA id j12sm361118lfc.99.2021.01.06.05.22.31 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 06 Jan 2021 05:22:32 -0800 (PST) From: =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= To: Kishon Vijay Abraham I , Vinod Koul , Rob Herring Cc: Florian Fainelli , bcm-kernel-feedback-list@broadcom.com, Al Cooper , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= Subject: [PATCH V3 1/3] dt-bindings: phy: brcm,brcmstb-usb-phy: convert to the json-schema Date: Wed, 6 Jan 2021 14:22:23 +0100 Message-Id: <20210106132225.21215-1-zajec5@gmail.com> X-Mailer: git-send-email 2.26.2 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: Rafał Miłecki Changes that require mentioning: 1. interrupt-names Name "wakeup" was changed to the "wake". It matches example and what Linux driver looks for in the first place 2. brcm,ipp and brcm,ioc Both were described as booleans with 0 / 1 values. In examples they were integers and Linux checks for int as well. Both got uint32. 3. Added minimal description Signed-off-by: Rafał Miłecki Acked-by: Florian Fainelli --- V2: Add Al as maintainer V3: Define "reg" and "reg-names" directly in the properties --- .../bindings/phy/brcm,brcmstb-usb-phy.txt | 86 -------- .../bindings/phy/brcm,brcmstb-usb-phy.yaml | 193 ++++++++++++++++++ 2 files changed, 193 insertions(+), 86 deletions(-) delete mode 100644 Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt deleted file mode 100644 index 698aacbdcfc4..000000000000 --- a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt +++ /dev/null @@ -1,86 +0,0 @@ -Broadcom STB USB PHY - -Required properties: -- compatible: should be one of - "brcm,brcmstb-usb-phy" - "brcm,bcm7216-usb-phy" - "brcm,bcm7211-usb-phy" - -- reg and reg-names properties requirements are specific to the - compatible string. - "brcm,brcmstb-usb-phy": - - reg: 1 or 2 offset and length pairs. One for the base CTRL registers - and an optional pair for systems with USB 3.x support - - reg-names: not specified - "brcm,bcm7216-usb-phy": - - reg: 3 offset and length pairs for CTRL, XHCI_EC and XHCI_GBL - registers - - reg-names: "ctrl", "xhci_ec", "xhci_gbl" - "brcm,bcm7211-usb-phy": - - reg: 5 offset and length pairs for CTRL, XHCI_EC, XHCI_GBL, - USB_PHY and USB_MDIO registers and an optional pair - for the BDC registers - - reg-names: "ctrl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec" - -- #phy-cells: Shall be 1 as it expects one argument for setting - the type of the PHY. Possible values are: - - PHY_TYPE_USB2 for USB1.1/2.0 PHY - - PHY_TYPE_USB3 for USB3.x PHY - -Optional Properties: -- clocks : clock phandles. -- clock-names: String, clock name. -- interrupts: wakeup interrupt -- interrupt-names: "wakeup" -- brcm,ipp: Boolean, Invert Port Power. - Possible values are: 0 (Don't invert), 1 (Invert) -- brcm,ioc: Boolean, Invert Over Current detection. - Possible values are: 0 (Don't invert), 1 (Invert) -- dr_mode: String, PHY Device mode. - Possible values are: "host", "peripheral ", "drd" or "typec-pd" - If this property is not defined, the phy will default to "host" mode. -- brcm,syscon-piarbctl: phandle to syscon for handling config registers -NOTE: one or both of the following two properties must be set -- brcm,has-xhci: Boolean indicating the phy has an XHCI phy. -- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy. - - -Example: - -usbphy_0: usb-phy@f0470200 { - reg = <0xf0470200 0xb8>, - <0xf0471940 0x6c0>; - compatible = "brcm,brcmstb-usb-phy"; - #phy-cells = <1>; - dr_mode = "host" - brcm,ioc = <1>; - brcm,ipp = <1>; - brcm,has-xhci; - brcm,has-eohci; - clocks = <&usb20>, <&usb30>; - clock-names = "sw_usb", "sw_usb3"; -}; - -usb-phy@29f0200 { - reg = <0x29f0200 0x200>, - <0x29c0880 0x30>, - <0x29cc100 0x534>, - <0x2808000 0x24>, - <0x2980080 0x8>; - reg-names = "ctrl", - "xhci_ec", - "xhci_gbl", - "usb_phy", - "usb_mdio"; - brcm,ioc = <0x0>; - brcm,ipp = <0x0>; - compatible = "brcm,bcm7211-usb-phy"; - interrupts = <0x30>; - interrupt-parent = <&vpu_intr1_nosec_intc>; - interrupt-names = "wake"; - #phy-cells = <0x1>; - brcm,has-xhci; - syscon-piarbctl = <&syscon_piarbctl>; - clocks = <&scmi_clk 256>; - clock-names = "sw_usb"; -}; diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml new file mode 100644 index 000000000000..4b8958d8c119 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/brcm,brcmstb-usb-phy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom STB USB PHY + +description: Broadcom's PHY that handles EHCI/OHCI and/or XHCI + +maintainers: + - Al Cooper + - Rafał Miłecki + +properties: + compatible: + enum: + - brcm,bcm7211-usb-phy + - brcm,bcm7216-usb-phy + - brcm,brcmstb-usb-phy + + reg: + minItems: 1 + maxItems: 6 + items: + - description: the base CTRL register + - description: XHCI EC register + - description: XHCI GBL register + - description: USB PHY register + - description: USB MDIO register + - description: BDC register + + reg-names: + minItems: 1 + maxItems: 6 + items: + - const: ctrl + - const: xhci_ec + - const: xhci_gbl + - const: usb_phy + - const: usb_mdio + - const: bdc_ec + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + minItems: 1 + maxItems: 2 + items: + - const: sw_usb + - const: sw_usb3 + + interrupts: + description: wakeup interrupt + + interrupt-names: + const: wake + + brcm,ipp: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Invert Port Power + minimum: 0 + maximum: 1 + + brcm,ioc: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Invert Over Current detection + minimum: 0 + maximum: 1 + + dr_mode: + description: PHY Device mode. If this property is not defined, the PHY will + default to "host" mode. + enum: + - host + - peripheral + - drd + - typec-pd + + brcm,syscon-piarbctl: + description: phandle to syscon for handling config registers + $ref: /schemas/types.yaml#/definitions/phandle + + brcm,has-xhci: + description: Indicates the PHY has an XHCI PHY. + type: boolean + + brcm,has-eohci: + description: Indicates the PHY has an EHCI/OHCI PHY. + type: boolean + + "#phy-cells": + description: | + Cell allows setting the type of the PHY. Possible values are: + - PHY_TYPE_USB2 for USB1.1/2.0 PHY + - PHY_TYPE_USB3 for USB3.x PHY + const: 1 + +required: + - reg + - "#phy-cells" + +anyOf: + - required: + - brcm,has-xhci + - required: + - brcm,has-eohci + +allOf: + - if: + properties: + compatible: + contains: + const: brcm,brcmstb-usb-phy + then: + properties: + reg: + minItems: 1 + maxItems: 2 + - if: + properties: + compatible: + contains: + const: brcm,bcm7211-usb-phy + then: + properties: + reg: + minItems: 5 + maxItems: 6 + reg-names: + minItems: 5 + maxItems: 6 + - if: + properties: + compatible: + contains: + const: brcm,bcm7216-usb-phy + then: + properties: + reg: + minItems: 3 + maxItems: 3 + reg-names: + minItems: 3 + maxItems: 3 + +additionalProperties: true + +examples: + - | + #include + + usb-phy@f0470200 { + compatible = "brcm,brcmstb-usb-phy"; + reg = <0xf0470200 0xb8>, + <0xf0471940 0x6c0>; + #phy-cells = <1>; + dr_mode = "host"; + brcm,ioc = <1>; + brcm,ipp = <1>; + brcm,has-xhci; + brcm,has-eohci; + clocks = <&usb20>, <&usb30>; + clock-names = "sw_usb", "sw_usb3"; + }; + - | + #include + + usb-phy@29f0200 { + compatible = "brcm,bcm7211-usb-phy"; + reg = <0x29f0200 0x200>, + <0x29c0880 0x30>, + <0x29cc100 0x534>, + <0x2808000 0x24>, + <0x2980080 0x8>; + reg-names = "ctrl", + "xhci_ec", + "xhci_gbl", + "usb_phy", + "usb_mdio"; + brcm,ioc = <0x0>; + brcm,ipp = <0x0>; + interrupts = <0x30>; + interrupt-parent = <&vpu_intr1_nosec_intc>; + interrupt-names = "wake"; + #phy-cells = <0x1>; + brcm,has-xhci; + syscon-piarbctl = <&syscon_piarbctl>; + clocks = <&scmi_clk 256>; + clock-names = "sw_usb"; + };